316L Bakas pirkti naudotą (1 944)

Būklė: naujas, Visiškai naujas 316L bakas, 5000 l, niekada nenaudotas. Pjdpfxezcg Ufj Acasgp

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 9 000 l, Įranga: dokumentacija / vadovas, BRINOX 9000 L GMP Washing and Elution Solution Vessel Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The vessel was used in a pharmaceutical production facility. Suitable for the preparation, storage, and supply of process solutions in GMP environments. Design and Equipment Cylindrical stainless steel vessel in horizontal design Process connections on the end plates Large manway with pressure locking device Integrated CIP system with spray ball High-gloss polished internal surface Hygienic, product-contact fittings Multiple measurement and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and mounted parts as shown in the photo documentation are present. FAT and Documentation Status According to FAT documentation “IT-11.1 Welding Documentation Inspection,” the welding documentation was reviewed during factory acceptance testing (FAT 01, 23.10.2020). Confirmed, among others: Designation of welders and welding inspectors Welder qualifications per EN ISO 9606-1 WPS and WPQR documentation Proofs for shielding gas suitability Documented test welds Visual spot checks without complaints Podjykkk Hjpfx Acaegp Traceability according to 3.1 material certificates The complete welding documentation is included in the Turn-Over Package. Documentation – fully available FAT plan and FAT report Layout and design drawings P&ID diagrams Calibration protocols Surface and roughness tests Leak test Welding plan WPQR WPS Welder qualifications Borescopy report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital form. Special Features Fully documented GMP version with verified welding documentation and comprehensive quality package. Highly suitable for reinstatement in pharmaceutical production facilities or for validation-required applications.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 9 000 l, Įranga: dokumentacija / vadovas, BRINOX 9,000 L Wash Solution Tank – 316L – Double Jacket – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year of Manufacture: 2020 Condition: As new / unused Technical Specifications Product Type: Wash Solution Tank Nominal Capacity: approx. 9,000 liters Product-contacting Material: 1.4404 (AISI 316L) Design: Horizontal configuration CE Marking: Present Pressure Vessel according to PED 2014/68/EU TÜV inspected with acceptance report Double jacket available for heating/cooling Designed for pharmaceutical applications Internal Surface: • High-gloss polished • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Heavy-duty, project-specific fabrication in 316L stainless steel • Large-diameter manway with pressure lock • Integrated CIP spray lances / cleaning pipes • Multiple clamp and flange connections • Instrument connections (pressure, temperature, sensing) • Robust lifting and handling lugs • Industrial-grade heavy-duty construction • Externally pre-installed piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, clean welding, and mirror-polished product-contacting internal surfaces. Condition • Never used in production • Stock item from project surplus • Absolutely clean interior • No corrosion • No signs of use • In as-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production facilities • Sterile liquid processes Documentation – complete and structured A comprehensive project-related quality and fabrication documentation is available for the tank, including: • EU Declaration of Conformity and warranty certificates • Reports and EU component documentation • Assembly documents • Partial drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design validation and certification • Welder lists, welding procedure qualifications, work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates Pgedpfx Aceykkiveaop • Internal pressure test report • Dimensional accuracy inspection • Roughness protocol • Surface treatment report • Operating and maintenance manuals (device) • Operating and maintenance manuals (components) • FAT documents (Factory Acceptance Test) Complete documentation portfolio available digitally. Special Features This is not a standard tank, but a high-end project-specific fabrication in genuine pharmaceutical quality with certified pressure design, documented manufacturing, and full PED compliance with TÜV approval. Heavy, robust construction, large-dimensioned connections, and CIP integration make this tank ideal for demanding GMP applications.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 3 200 l, Įranga: dokumentacija / vadovas, BRINOX 3,200 L Solution Tank – 316L Stainless Steel – Double Jacket – TÜV / PED Module G – FAT – 2020 – Like New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Pgsdpfsykkhrsx Acaop Type: ELUTION / Solution Tank Capacity: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: Present (CE 0036) Tank Pressure: Operating pressure: -1 / +3 bar Test pressure: According to TÜV inspection Jacket Pressure (Heating/Cooling Jacket): Operating pressure: -1 / +6 bar Test pressure: According to TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Individual inspection Acceptance by notified body (number 0036) FAT – Factory Acceptance Test The tank was tested as part of a documented FAT. The inspections included, among others: • Welding documentation review • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness measurement • Calibration test of sensors • Layout and dimensional check • Documentation review Comprehensive FAT report including test records available in full. DESIGN FEATURES • Double jacket for heating/cooling • Completely made from 316L stainless steel • Mirror-polished interior surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection ports • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensors) • Heavy-duty project execution • Lifting lugs for crane handling CONDITION • Never used in production • Warehouse surplus from project stock • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION – complete and structured A comprehensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Material certificates (3.1) • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing (NDT) reports • Analysis certificates for welding consumables and shielding gas • Surface roughness report • Surface treatment report • Dimensional accuracy inspection • Internal pressure test • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media SPECIAL FEATURE This is not a standard tank but a high-specification, BRINOX project-built vessel in true pharmaceutical quality, featuring validated pressure design, full PED compliance (Module G), documented FAT inspection, and comprehensive quality documentation. Project-grade equipment for sterile applications – immediately available.

Būklė: naudotas, Naudotas vertikalus, mobilus, nerūdijančio plieno AISI 316L reaktorius, pagamintas „BOCCARD“ (Prancūzija), bendra talpa – 577 l. Reaktoriaus naudingoji talpa – 300 l, skirtas darbui esant -1 iki 0,5 baro slėgiui ir iki 110 °C temperatūrai. Vidiniai matmenys: skersmuo – 880 mm, tiesios sienelės ilgis iki apžiūros angos – 800 mm. Šildymo ir aušinimo apvalkalas, pagamintas iš nerūdijančio plieno AISI 304, talpa – 35 l, skirtas darbui esant iki 3,5 baro slėgiui ir iki 145 °C temperatūrai. Apvalkalas yra izoliuotas ir dengtas nerūdijančio plieno lakštu. Reaktorius turi suvirintą išlenktą viršutinę dalį su apžiūros anga, vidinis skersmuo – 350 mm. Viršutinėje dalyje taip pat įmontuotas vertikaliai į apačią nukreiptas homogenizavimo maišytuvas, valdomas tiesiogiai elektros varikliu, kurio galia – 2,2 kW, 400 V, 960 aps./min., 50 Hz. Reaktorius turi suvirintą išlenktą apatinę dalį su centrine išleidimo anga ir rankiniu vožtuvu. Įrenginys montuojamas ant integruoto rėmo su 4 ratais ir elektros spinta, į kurią įmontuotas dažnio keitiklis. Techninės specifikacijos: Talpa: 577 l Nerūdijančio plieno tipas: AISI 316L, o apvalkale – AISI 304 Vidinis slėgis: -1 bar Vidinė temperatūra: 110 °C Apvalkalo slėgis: 3,5 bar Skersmuo: 880 mm Tiesioji siena: 800 mm Galų tipas: išlenkti viršus ir apačia Atramos/tvirtinimo elementai: atramos su ratais Pedpfx Aszbuhwjcaogp Svoris: 620 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications – ENERGY SAVER SET INCLUDES: - LUFT 700 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer - 500 L horizontal compressed air receiver tank Key features distinguishing these models: 1. Permanent Magnet Motor Technology (PM) Most compressors from the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: - They achieve efficiency levels compliant with IE4 or even IE5 standards - They maintain high efficiency even at very low RPMs (standard motors lose efficiency outside their nominal range) - They are smaller, lighter, and generate less heat 2. Advanced Variable Speed Drive (VSD) Control At the heart of the Energy Saver line is the frequency inverter (VSD). - Demand-based adjustment: The compressor does not operate in an "all or nothing" (load/unload) system. If your machine only requires 30% output, the compressor will reduce speed, consuming proportionately less energy. - Idle running eliminated: Classic compressors often run for several minutes after the tank is filled, consuming around 25–30% of nominal power without producing air. Energy Saver models virtually eliminate this wasteful process. 3. Soft Start Thanks to the inverter, these devices start smoothly from 0 Hz. This means there are no sudden current peaks at startup, which: - Protects your facility’s electrical installation - Allows for more frequent starts and stops without risking winding overheating 4. Real Savings Pgsdpoycg Ryefx Acaep In practice, the Energy Saver series allows you to cut electricity costs by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable line pressure (accuracy of up to 0.1 bar), essential for precision tools such as laser cutters. Extended service life: The absence of sudden pressure and temperature spikes prolongs the screw stage’s lifespan. Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Free air delivery 0-6 bar: approx. 690 L/min Free air delivery at 6 bar: 690 L/min Free air delivery at 8 bar: 650 L/min Free air delivery at 10 bar: 650 L/min Outlet connection diameter (G): 1/2" Dimensions: 1840 x 640 x 1470 mm Weight: 320 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 1500 VSD+PM Compact Screw Compressor with Dryer – a compact set for demanding applications – ENERGY SAVER SET INCLUDES: - LUFT 1500 VSD+PM COMPACT Screw Compressor with integrated dryer. - Horizontal 500 L Compressed Air Receiver. Key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet motors. Compared to standard induction motors: - They provide efficiency levels compliant with IE4 or even IE5 standards. - Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). - Are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). - Demand-adaptive: The compressor does not work in a fixed "on/off" (load/unload) cycle. If your facility requires only 30% output, the compressor reduces RPM accordingly, consuming proportionally less energy. - Idle-running elimination: Conventional compressors often continue to run for several minutes after filling the tank, drawing about 25–30% of nominal power without producing compressed air. Energy Saver models almost completely eliminate this wasteful operation. 3. Soft Start Thanks to the VSD, these units start up smoothly from 0 Hz. This means no sudden current surges during start-up, which: - Protects your factory’s electrical installation. - Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Real Savings Podpfxeychbas Acaegp In practice, using the Energy Saver line enables reduction of electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains a very stable network pressure (accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: the absence of sudden pressure and temperature fluctuations extends the lifespan of the screw stage. Technical specifications Motor power: 11 kW / 15 HP Voltage: 400V/50Hz Output at 0-6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 x 740 x 1750 mm Weight: 500 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, CORMAK LUFT 1000 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER THE SET INCLUDES: - LUFT 1000 VSD+PM COMPACT SCREW COMPRESSOR with integrated dryer. - 500 L horizontal compressed air receiver tank. Key features that distinguish these models: 1. Permanent Magnet Motor Technology (PM) Most compressors from the Energy Saver series use permanent magnet motors. Compared to standard induction motors: - They feature efficiency compliant with IE4 or even IE5 standards. - They maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). - They are smaller, lighter, and generate less heat. Pgodpfoycg Ufex Acajp 2. Advanced Inverter Control (VSD) The heart of the Energy Saver line is the frequency converter (inverter). - Demand-based operation: The compressor does not work in an “all or nothing” (load/unload) system. If your machine only needs 30% capacity, the compressor reduces speed and consumes proportionally less energy. - Elimination of idle mode: Traditional compressors often run for several minutes after filling the receiver, drawing approx. 25–30% of nominal power without producing air. Energy Saver models almost completely eliminate this wasteful process. 3. Soft Start With the inverter, these devices start smoothly from 0 Hz. This means no sudden spikes in current at start-up, which: - Reduces electrical stress on the plant’s power system. - Enables more frequent start-stop cycles without risking winding overheating. 4. Actual Savings In practice, using the Energy Saver line can reduce electricity bills by 30% to 50% compared to traditional fixed-speed compressors. The system also maintains exceptionally stable network pressure (accuracy up to 0.1 bar), which is crucial for precision equipment such as laser cutters. Longer service life: the absence of sudden pressure and temperature surges extends the lifecycle of the screw stage. Technical Data: Motor power: 7.5 kW / 11 HP Voltage: 400V/50Hz Capacity 0–6 bar: average 990 L/min Capacity at 6 bar: 990 L/min Capacity at 8 bar: 950 L/min Capacity at 10 bar: 950 L/min Outlet connection diameter (G): 3/4" Dimensions: 1495 x 600 x 1600 mm Weight: 350 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 700 VSD+PM Compact Screw Compressor with Dryer – Compact Set for Demanding Applications - ENERGY SAVER SET INCLUDES: LUFT 700 VSD+PM COMPACT Screw Compressor with integrated dryer. 270 L Horizontal Compressed Air Receiver Tank. Here are the key features that set these models apart: Pgsdpfeycg I Ssx Acajp 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series utilize Permanent Magnet motors. Unlike standard induction motors: They offer efficiency levels compliant with IE4 or even IE5 standards. Maintain high performance even at very low rpm (standard motors lose efficiency outside their nominal range). They are smaller, lighter, and generate less heat. 2. Advanced Inverter Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). Demand-based operation: The compressor does not operate in a simple on/off (load/unload) mode. If your machine only requires 30% capacity, the compressor reduces its speed accordingly, consuming proportionally less energy. Idle run elimination: Classic compressors often operate for several minutes after the tank is full, using approx. 25–30% of nominal power without producing air. Energy Saver models nearly eliminate this wasteful process entirely. 3. Soft Start Thanks to the inverter, these units start smoothly from 0 Hz. This means there are no sudden current surges during startup, which: Protects your facility’s electrical installation. Allows for more frequent start/stop cycles without the risk of winding overheating. 4. Significant Energy Savings In practice, using the Energy Saver line allows electricity bills to be reduced by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains very stable network pressure (accurate to 0.1 bar), which is crucial for precise devices such as laser cutters. Longer service life: The absence of sudden pressure and temperature fluctuations extends the lifespan of the screw block. Technical specifications Motor Power: 5.5 kW / 7.5 HP Voltage: 400V/50Hz Output 0-6 bar: avg. 690 L/min Output at 6 bar: 690 L/min Output at 8 bar: 650 L/min Output at 10 bar: 650 L/min Outlet port diameter (G): 1/2" Dimensions: 1495 x 520 x 1340 mm Weight: 250 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 4 000 l, naudojamo bako talpa: 4 000 l, bendras plotis: 1 600 mm, bendras aukštis: 3 500 mm, sienų medžiaga: nerūdijantis plienas, liuko skersmuo: 400 mm, liuko vieta: Top, Nerūdijančio plieno bakas (Inox) – 4 000 l Turimas kiekis: 7 vnt. Matmenys ir detalės 1 variantas (2 vnt.): Skersmuo: 180 cm Aukštis: 250 cm 2 variantas (5 vnt.): Psdpfx Asyw Tp Hocaegp Skersmuo: 160 cm Aukštis: 360 cm (gali būti sutrumpintas iki 300 cm) Papildoma įranga Sluoksnių filtras: Seitz Orion 40/60 – 2 vnt.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: kompresorius, Gamintojas: ETSCHEID Talpa: 1500 l Su maišytuvu Su integruotu valymo įrenginiu (CIP) Įskaitant šaldymo agregatą Būklė: labai gera Pgjdpfx Ajxb D Huscaop

Būklė: labai geros būklės (naudotas), Professional mobile tank for the storage and distribution of diesel fuel / light fuel oil from the renowned German manufacturer Rietbergwerke GmbH & Co. KG. Solid galvanized steel construction, adapted for forklift transport. The tank is equipped with a 24V electric pump from HORN GmbH and a refueling nozzle. Ideal for: • Agricultural holdings • Workshops • Transport companies • Construction sites • Fuel storage for machinery and equipment Technical data: • Manufacturer: Rietbergwerke GmbH & Co. KG • Tank capacity: 250 L • Year of production: 1993 • Hazard class: A III • Test pressure: 3 bar • Fuel pump: HORN GmbH Pgsdpfx Acey Nm Rnjajp • Pump power supply: 24V • Power: 132 W • Current: 5.5 A • Maximum delivery height: 6 m • For diesel and light fuel oil • Refueling nozzle + hoses • Protective housing • Forklift transport possible • Galvanized steel construction Condition: Used item. Shows normal signs of use corresponding to age and operation. Visual condition and completeness as shown in the photos. Set includes: • 250L tank, • 24V pump, • hoses, • refueling nozzle, • transport frame.

Būklė: geras (naudotas), 13 500 l nerūdijančio plieno bakas, Plieno klasė AISI316L, Skersmuo 2,30 m, Pgjdpfxem Tv D Rs Acajp Aukštis 3,50 m, Cilindrinės sienelės storis 2,1 mm, Dugno storis 3,4–4 mm, Yra 3 vnt. Bakas reikalauja betoninio nuolaidimo ar platformos, ant kurios būtų sumontuotas išleidimo vožtuvas (platforma galima už papildomą kainą).

Būklė: naudotas, Gamybos metai: 2002, „Roth“ dvigubas nerūdijančiojo plieno bakas, 2 x 30,015 litro. Podpozmakmofx Acajgp Būklė: gera. Papildoma vieta: E1.

Gamybos metai: 1993, būklė: paruoštas naudoti (naudotas), Galimi įvairūs žalių pieno rezervuarai ir talpyklos, prijungtos prie vožtuvų bloko. 1) Talpa: 25 m³, pagaminimo metai: 2014, yra maišytuvas. 2) 2 „Ullmann“ talpyklų grupė, pagaminimo metai: 1993, talpa: 25 500 l, maksimali darbinė temperatūra: 20 °C, minimalus/maksimalus darbinis slėgis: -0,4 bar/0,4 bar, yra maišytuvas. 3) Žalių pieno talpykla, talpa: 14 000 l, yra maišytuvas. Pedpfxoznx H As Acaegp 4) Žalių pieno talpyklos vožtuvų blokas. Dokumentacija yra. Galima atlikti apžiūrą vietoje.

Būklė: naudotas, 🧰 Produkto savybės • Gamintojas: Bauer • Būklė: naudotas • Spalva: oranžinė • Talpa: 2000 l • Savitasis svoris: 680 kg • Ilgis: 270 cm • Plotis: 115 cm • Aukštis: 180 cm • Naudingoji apkrova: 2120 kg • Leidžiamas bendras svoris: 2800 kg • Talpyklos išvalytos 💰 Kaina 900 € (be PVM) • Nuolaida už didesnį kiekį: pagal užklausą • Pristatymo kaina: visoje Europoje, pagal užklausą • Pristatymo laikas: galima iš karto • Apžiūra ir atsiėmimas: galima bet kuriuo metu, susitarus Nuolat turime daugiau nei 5000 metrų palečių lentynų iš įvairių gamintojų (Pasilieka teisė keisti technines specifikacijas, duomenis ir kainas bei atlikti tarpinius pardavimus! Žr. mūsų bendrąsias sąlygas, visos kainos be PVM, iš sandėlio.) „Lenox Trading“ – aukščiausios kokybės sandėliavimo įranga ir sunkiųjų prekių lentynos, naujos ir naudotos Aprašymas: Ieškote aukštos kokybės sandėliavimo lentynų? „Lenox Trading“ yra vienas didžiausių naujos ir naudotos sandėliavimo įrangos prekeivių DACH regione (Austrija, Vokietija, Šveicarija), kuriame dirba apie 100 darbuotojų. ⚡ GREITAS PRISTATYMAS: • Daugiau nei 10 000 metrų lentynų galima pristatyti iš karto Pedsuwc Rxepfx Acasgp • 20 000 m² sandėlio platformų ir plieninių konstrukcijų platformų galima pristatyti iš karto • Kiekvieną savaitę 30–50 vilkikų perveža prekes, kad užtikrintų didžiausią pasirinkimą 📦 MŪSŲ ASORTIMENTAS (PATOGU PIRKTI INTERNETU): Nesvarbu, ar ieškote palečių lentynų, sunkiųjų prekių lentynų, aukštų lentynų, lentynų su padaliniais, padangų lentynų ar lentynų IBC konteineriams – mes pristatome ir montuojame visoje Europoje su mūsų PAČIOS komanda! Įskaitant CAD projektavimą, transportavimą, išmontavimą ir surinkimą. 🏭 GERIAUSI PREKIŲ ŽENKLAI, NAUDOTI IR IŠ PIRKIMŲ / BANKROTO: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tipas MPB, tipas E, sunkiųjų prekių lentynos Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Konsolinės lentynos (Elvedi konsolinės lentynos, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 MŪSŲ ANTRAS VEIKLOS SRITIS: INTERNETO AUKCIONAI IR IŠNAUDOJIMAS Išmontavimo ir išvalymo darbų atveju siūlome pilną paslaugų paketą: 1. Bendras įsigijimas: prekinių ženklų, įrangos ir visų sandėlio atsargų įsigijimas, įskaitant švarų išvalymą. 2. Aukcionas pagal užsakymą: aukcionų vykdymas pagal užsakymą. Mūsų visapusiškos paslaugos, atliekamos mūsų pačių darbuotojų: katalogizavimas, biurų paruošimas, apžiūra, prekių išdavimas, logistika, išmontavimas ir švarus išvalymas. Nesvarbu, ar apie mus sužinojote dėl sunkiųjų prekių lentynų, ar ieškote cinkuotų sunkiųjų prekių lentynų / sunkiųjų prekių lentynų sistemos – mes garantuojame geriausias sąlygas. Susisiekite su mumis, jei norite gauti nesaistomą pasiūlymą!

Būklė: geras (naudotas), We offer steel tanks for the storage of almost all common liquid media. We keep all available sizes from 1,000 litres to 100,000 litres in stock at all times. Pgjdjgx E Uhepfx Acaop No matter how you want your tank to be equipped, we implement your requirements and official regulations at fair prices. Whether it’s internal lining, 2-component epoxy coating, exterior paint, fitting installations or modifications, DEKRA certification, loading, or transport – we are your reliable partner.

Būklė: geras (naudotas), 50,000 litre tank, double-walled, cleaned, degassed - Cleaning protocol available - Special dimensions - Short design (8.15 m length, 2.90 m diameter, 10.5 t) - Equipped with ladder - Equipped with platform - Attachments included (vent, overfill prevention sensor, dipstick, leak detector) - Good condition - Ready for immediate use Transport can be offered as an option. Pedpfxoq U Slrs Acajgp Only serious and genuine enquiries with the following details will be answered: Name, email address and telephone number.

Būklė: naudotas, 100 000 litrų – požeminis rezervuaras Pjdpfx Acexcgg Toasgp - dvisienis - išvalytas - 2 liukai - yra nežymių išmontavimo žymių - Vidinis padengimas galimas pagal pageidavimą - Tinka techniniam ir gesinimo vandeniui Pakrovimas ir transportavimas gali būti pasiūlyti! Į atsakymus bus atsižvelgta tik į rimtus ir patikimus užklausimus su: vardu, el. pašto adresu ir telefono numeriu.

Gamybos metai: 2020, būklė: labai geros būklės (naudotas), Siūlome šį nerūdijančio plieno baką, pagamintą „Constructii metalice Regent Nifa Grup“, modelis „Bazin de inox“, nerūdijančio plieno tipo, talpa 37 000 litrų, pagaminimo metai – 2020, puikios būklės. Nerūdijančio plieno bakas maisto produktams, 37 000 litrų (37 tonos) – idealus vyno sandėliui / pramonei. Pgjdpfezp Dyqox Acasp Kaina: 10 000 € (galima derėtis / Aprašymas: parduodamas didelio tūrio (37 000 litrų / 37 tonos) nerūdijančio plieno bakas (rezervuaras), puikios techninės būklės. Dėl didelio tūrio ir aukštos kokybės medžiagos, puikiai tinka pramoniniam arba žemės ūkio naudojimui. Techninės specifikacijos: Talpa: 37 000 litrų. Medžiaga: nerūdijantis plienas (atsparus korozijai, idealus skysčiams, kuriems keliami aukšti reikalavimai). Ideali paskirtis: vyno / gėrimų laikymas (vyno sandėlyje), pieno surinkimas, augalinių aliejų laikymas, geriamojo vandens laikymas arba buferinis rezervuaras P.S.I. (gaisro gesinimo sistemai). Pastaba: bakas yra Constanța apygardoje. Vieta leidžia lengvai prireikšti sunkiąją techniką (kranu, vilkiku / platforma) krovimui ir transportavimui. Krovimas ir transportavimas – pardavėjo atsakomybė. Daugiau informacijos, papildomų nuotraukų ar norėdami suplanuoti apžiūrą vietoje, susisiekite telefonu arba per „WhatsApp“. Prašome susisiekti rimtai. Jei turite papildomų klausimų arba jums reikia daugiau informacijos, nedvejodami siųskite mums žinutę arba skambinkite.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, BOLZ nerūdijančio plieno maišymo talpyklas, 706 litrai slėgiui atsparus magnetinis maišytuvas su šildymo apvalkalu talpyklos talpa: 706 litrai naudingoji talpa: 600 litrų maksimali darbinė temperatūra: 150 °C „Nord Drives“ magnetinis maišytuvas galia: 0,55 kW Pgsdpszqantefx Acasp Gamintojas: kita Pagaminimo metai: 2006 Matmenys: 140 x 105 x 215 cm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, VÖGELE Apparatebau maišymo įrenginio bakas, 692 l slėgiui atsparus magnetinis maišytuvas (Mavag / Nord) su šildymo apvalkalu bako talpa: 692 litrai apvalkalo talpa: 62 litrai su produktu kontaktuojančios dalys pagamintos iš nerūdijančio plieno Psdpfjzqangox Acaegp darbinis slėgis: viduje: -1 / +4 bar, apvalkale: -1 / 6 bar Gamintojas: nežinomas Pagaminimo metai: 2002 Reikalingas plotas: 110 x 130 x 210 cm

Būklė: labai geros būklės (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 02/1993, bendras ilgis: 8 000 mm, bendras plotis: 2 500 mm, bendras aukštis: 3 900 mm, pakaba: oras, padang padangų: 50 procentas, spalva: kitas, Gamybos metai: 1993,

Būklė: geras (naudotas), Gamybos metai: 2003, Filtration is carried out by an internal filter unit - Manufacturer: Atlantik GmbH - Model: 30.701.31.15100 - Operating pressure: 10 bar - Filtered particle size: 6.0 µm (microns) Pgsdoiw Eafspfx Acaep - Dimensions: 1050 x 1150 x 1620 mm - Capacity: 425 l - Electrical data: 250 V, 5 A, 50/60 Hz - Year of manufacture: 2003

Gamybos metai: 2015, būklė: beveik kaip naujas (naudotas), Piovan granulių talpykla su inverteriu ir PLC. Pgsdjgh Tkpspfx Acajp Su saugos viršutiniu dangčiu. Talpyklos skersmuo: 650 mm Talpyklos aukštis: 800 mm Bendri matmenys: 650x800x1300 mm