Weiler Rdu 260/38 pirkti naudotą (5 966)

Būklė: naudotas, Turning length: 500 mm Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Spindle bore: 36.0 mm Spindle mount: DIN 55022 size 5 Tailstock quill: MK 3 Quill travel: 90.0 mm Spindle speed range: 30 – 3,550 rpm Motor speeds: 1,410 / 2,830 rpm Total power requirement: 3.3 kW Voltage: 380 V Machine weight: approx. 620 kg Dimensions (L-W-H): 1,420 x 700 x 1,200 mm From a technical school – in very good condition (!!) Regularly serviced by WEILER factory service Particularly suitable for medium-sized precision turned parts Ncjdpfx Afoxaccxeaou Equipment: - Robust lead screw/feed shaft lathe - KLOPFER four-jaw chuck Ø 140 mm - Collet chuck with a large number of collets - Chuck key - MULTIFIX tool holder size A, with 3 new inserts - Movable tailstock - Adjustable bed stop - Control panel, front left - Automatic longitudinal and cross feeds - Pole-changeable drive motor - Machine base with cabinet door (storage space) - Chip and splash guard rear panel

Būklė: naudotas, Turning length 500 mm Turning diameter over bed 297 mm Turning diameter over cross slide 160 mm Spindle bore 36.0 mm Mounting DIN 55022 Size 5 Quill: 3 MT Quill stroke 90.0 mm Speed range 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement 3.3 kW Voltage 380 V Machine weight approx. 620 kg Dimensions L-W-H 1420 x 700 x 1200 mm Nedpfx Ajxacirefaecu From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-sized precision turning parts Equipment: - Robust leadscrew/feedshaft lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - Collet chuck with numerous collets - Foldable chuck guard - Chuck key - MULTIFIX tool post A, with 3x new tool holders - Movable tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for cross and top slide - Pole-changeable drive motor - Machine base with cabinet door (storage space) - Chip splash guard (rear wall) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Būklė: reikia remonto (naudotas), Turning length: 1000 mm Swing over bed: 380 mm Swing over cross slide: 190 mm Spindle speed range: 25 - 2000 rpm Number of spindle speeds: 18 Spindle bore Ø: 56.0 mm Nedpfx Afsw U U Uqsascu Tailstock quill taper: MK DIN 228 / MK 4 Quill travel: 150 mm Bed width: 310 mm Spindle mount: DIN 55027 / 6 Longitudinal feed: 0.022 - 0.8 mm/rev Cross feed: 0.011 - 0.4 mm/rev Metric threads: 0.3 - 10.0 mm Operating voltage: 380 V Total power requirement: 7.5 kW Machine weight approx.: 1,600 kg Basic functions present Machine has various leaks Sold as-is at special price! Engine lathe with precision ground and induction-hardened bed. Very suitable for use in workshops and training facilities. - Machine video - ?v=zCGu4i6V5dM Equipment: - robust lead and feed screw lathe - FORKARDT 3-jaw chuck Ø 200 mm, with chuck key - MULTIFIX tool post - size B - with 3 inserts - sliding tailstock, including quick-action drill chuck - rear chip guard - front emergency stop button - adjustable bed stop - coolant system including coolant tray - operating manual (PDF)

Būklė: naudotas, Turning length: 800 mm Nsdoxacg Repfx Afaecu Turning diameter: 280 mm Turning diameter over cross slide: 150 mm Spindle bore: 42.0 mm Tailstock quill taper: MK 3 Bed width: 208 mm Spindle speed: 42 - 2022 rpm Spindle mount: DIN 55027/5 Quill travel: 90.0 mm Voltage: 380 V Total power requirement: 3.0 kW Machine weight approx.: 750 kg Dimensions (L x W x H): 1800 x 800 x 1250 mm Due to its design (construction type, power, feeds, etc.), it can be successfully used both in training workshops as well as in toolmaking and repair shops. Equipment: - robust conventional lead-/feed-screw lathe - WMW 3-jaw chuck, Ø 150 mm - Face plate, 280 mm - MULTIFIX quick-change toolpost, with insert - sliding tailstock - chuck key - machine base with storage space - pole-changing drive motor - operating manual

Būklė: naudotas, Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 91-160-2498, naudojamas kreipiančiųjų ir traukos varžtų tekinimo staklės WEILER PRAKTIKANT 160 Centras aukštis: 160 mm Centras tarp atstumų: 650 mm Veleno sukimosi greitis: apie 48-2.500 aps./min. Veleno skylė: 40,5 mm Uždengti vedamieji ir traukos varžtai. Komplektacija: su 3 ašių skaitmeniniu rodmeniu Heidenhain, drožlių apsauga gale, svirtinė spaustuvo sistemos įranga be spaustuvų, 1 x planavimo plokštė Ø 250 mm, griebtuvų apsauga su elektriniu saugumu, mašinos apšvietimas, greitai keičiama plieno laikiklio sistema Multifix Gr. A su 4 keičiamais laikikliais, lovos ribotuvas, Ncedpfx Afjyciw Ajaou aušinimo sistema ir stacionari lunetė. Staklės yra pas mus adresu 71334 Waiblingen-Beinstein ir iš karto prieinamos. Apžiūra po susitarimo įmanoma.

Būklė: naujas, Gamybos metai: 2025, CONDOR VC plus The new dimension in the field of conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high-productivity use in production and toolmaking, as well as in vocational training and education. High-quality, energy-efficient, precise, and universally applicable for production, training, and continuing education. Key features include: - Future-oriented technology - Maximum accuracy - Long service life - User-friendly ergonomics - Minimal space requirements - Extensive range of accessories The consistent and innovative further development of the well-established Condor series is an economical and intelligent solution for your daily operations. Technical Data: WORKING AREA Center height: 180 mm Swing over bed: 360 mm Swing over cross slide: 190 mm Distance between centers: 800 mm MAIN SPINDLE Spindle nose DIN 55027 / DIN ISO 702-3: Size 6 Spindle bore: 57 mm Spindle front bearing diameter: 90 mm MAIN DRIVE Drive power 60 % / 100 % duty cycle: – / 10.5 kW Speed range: 25 – 4,000 rpm Number of speeds: infinitely variable FEED RANGE Number: infinitely variable Longitudinal: 0.01 – 6 mm/rev Transverse: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MT 3 Nedsqwipnepfx Afaecu ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER WTS 15 VC plus screen display - Large, clear 15" touchscreen, rotatable and swiveling, resolution 1366 x 768 - Change operating screens by swiping - Operating functions accessible via app manager - Control panels can be freely configured, positioned, and scaled - Import of drawings/sketches from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) The machine is available for immediate delivery and can be viewed at our showroom in 71334 Waiblingen-Beinstein. For details regarding equipment, please contact us.

Būklė: naujas, Gamybos metai: 2025, Praktikant GSD Nedpfxewhzcpo Afajcu One of the best-selling and most popular conventional precision lathes Distinguishes itself through: sophisticated engineering highest precision durability ergonomics proven in practice minimal space requirements extensive range of accessories Proven over decades in single-part and small-batch production, in craftsmanship and industry, education and further training, as well as tool and jig manufacturing. Centre distance: 650 mm Centre height: 160 mm Automatic handwheel disengagement Lead and feed screw guard Main spindle brake Toolroom accuracy in accordance with DIN 8605 Two-speed brake motor Headstock gearbox 16 fixed speed ranges Digital position display (optional) LED machine lamp TECHNICAL DATA: WORKING RANGE Centre height 160 mm Swing over bed 320 mm Swing over cross slide 190 mm Centre distance 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter at front bearing 70 mm MAIN DRIVE Drive power 60%/100% duty cycle 2.6 / 3.1 kW Speed range 48 – 2,500 rpm Number of speeds 16 FEED RANGE Number of feeds 24 Longitudinal feed 0.02 – 0.63 mm/rev Cross feed 0.006 – 0.2 mm/rev THREAD CUTTING RANGE Metric threads 0.25 – 8* mm TAILSTOCK Quill diameter 40 mm Quill stroke 85 mm Quill taper DIN 228 MK 3 ACCEPTANCE ACCURACY DIN 8605 * Inch threads and metric pitches 0.45; 0.75; 4.5 and 5.5 are only possible with additional change gears. The machine is available immediately in our showroom in 71334 Waiblingen-Beinstein. For details regarding included equipment, please contact us.

Būklė: naudotas, Gamybos metai: 2000, naudotas CONDOR AC, dalinai atnaujintas Centru aukštis: 165 mm Atstumas tarp centrų: 750 mm Veleno skylė: 40 mm Veleno apsukos: 22–2 800 aps./min. be pakopų - Greito keitimo plieno laikiklis Gr. B - WEILER DZ-V skaitmeninis indikatorius - Tuščiaviduris veleno ribotuvas - Stacionari luneta - 7 vnt. Multifix laikiklių - Plokščia apsauginė siena - Elektriškai apsaugotas griebtuvų apsaugas - Kintami ratai ir įvairūs spaustuvai Staklės dalinai restauruotos: - Pagrindinis vežimėlis: vedimo kreiptuvės naujai padengtos ir nuskustos, pleištinės juostos ir apatinės spaudimo juostos pritaikytos - Skersinis vežimėlis išmatuotas ir sureguliuotas ant pagrindinio vežimėlio; skersinio vežimėlio kregždutės formos vedimo kreiptuvė naujai nuskusta, pleištinės juostos pritaikytos ir nuskustos - Viršutinis vežimėlis naujai nuskustas ir pleištinė juosta suderinta - Visi matavimo liniuotės atnaujintos ir laidai pakeisti Ncsdpox E Um Nsfx Afasu Staklės yra mūsų ekspozicijos salėje, 71334 Waiblingen-Beinstein, ir yra iš karto prieinamos. Dėl įrangos susisiekite su mumis.

Būklė: geras (naudotas), Atstumas tarp centrų: 450 mm Centro aukštis: 120 mm Velena anga: 23 mm Sukimosi greitis: 40 – 3000 aps./min. Bežingsnis pavara su 3 pavarų žingsniais ir skaitmeniniu greičio indikatoriumi Nsdpfxow I A Uxe Afaocu Galinis centras: MK 2 Pavaros galia: 1,5 kW Svoris: 350 kg Matmenys: 1200 x 650 x 1330 mm Dažymas: Resedos žalia RAL 6011 Skaitmeninis rodmuo: Pageidaujant už papildomą kainą Priedai: Papildomi priedai pagal užklausą

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: Ncodevrcqdspfx Afaou – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop – Machine feet – Coolant system – LED machine lamp For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Display, NEWLY Refurbished with Inspection Report for New Machine Tolerances Technical Specifications: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting possible: Metric, Inch, Module and Diametral Pitch >> Metric Thread Pitch: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis K&C Digital Readout, new, 12 months manufacturer's warranty with user manual Functions: mm/inch selection, coordinate choice ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 200 mm wedge-bar 3-jaw chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant device Ncsdpfxevrckqe Afasu >> LED machine lamp For safety the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground and scraped. Delivery includes an acceptance report according to inspection protocol. Coated with high-gloss 2K white paint. The Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs extremely smoothly. This latest generation of Weiler lathes is especially user-friendly and allows the production of ground-like finishes. You are welcome to inspect the machine under power on site to convince yourself of its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition! Technical Data: >> Machine No.: 2801 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose to DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev Ncsdpfxjv Tyzco Afasu >> Thread cutting options: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet device with collets from 2 mm to 12 mm in 1 mm increments, incl. draw tube >> Multifix size A quick-change toolpost with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in excellent condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler operates quietly. The Primus comes from a state-owned facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished to a ground quality. You are welcome to inspect the machine under power on site and see its condition for yourself. (Base cabinet is included; it is not bolted to the machine.) Digital readout available at extra cost.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: Morse taper 3 Nedpfxsvv Etvs Afascu >> Feeds from 0.010 to 1.184 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Dimensions: length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> Collet chuck set with 32 collets (set incomplete) with mounting >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. Take advantage of the opportunity to inspect this machine under power on site and verify its condition for yourself.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: Ncsdpjwrm Dtsfx Afasu >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts About the machine: Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Specifications: >> Year of manufacture: 1986 >> Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 8 steps, from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> Collet chuck system, collets as-new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders Nsdowthbispfx Afascu >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolmaker precision, in very good condition. The machine is fully operational. The Weiler has been completely disassembled and newly repainted in light grey. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is extremely user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power on site and convince yourself of its condition.

Būklė: naudotas, Four in a Row – The Success Building Blocks of DLK – Storage Technology | Levelmaker® | Logistics | Solutions WE OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm Ncjdpfx Aovdqhbofasu P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to provide you with a non-binding quote tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The indicated price is per piece/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing the applicable VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new Nsdsvivmyjpfx Afaecu About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, including 3-axis digital readout by K&C, brand new, CE compliant! Technical Data: – Machine No.: 2442, Year of manufacture: 1997 – Centre height: 165 mm – Centre distance: 750 mm – Spindle speeds: 22 to 2,800 rpm – Spindle bore: 40 mm – Short taper spindle nose DIN 55027 size 5 with bayonet lock – Tailstock taper: MT3 – Feeds: 0.015 to 0.46 mm/rev – Thread types: metric, inch, module, and diametral pitch – Metric thread pitches: 0.18 to 28 mm – Weight: approx. 1,100 kg – Switchable spindle brake – Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Accessories and Equipment: – 3-axis digital readout by K&C, brand new, 12-month manufacturer's warranty, operating manual included. Features: metric/inch conversion, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter switch, quick zeroing, count direction reversal. – 1 × 160 mm 3-jaw chuck, brand new, with 2 sets of jaws – 1 × 200 mm 4-jaw chuck with 1 set of jaws – Collet chuck system, brand new, with brand new collets from 3 to 25 mm in 1 mm increments – Multifix size B with 2 tool holders – Bed stop – Electronic spindle guard Ncjdpfjxcuazjx Afaju – Rear chip guard – Machine mounting feet Safety Features: – Electronic spindle guard – 2 × emergency stop buttons – Change gear cover with limit switch – Spindle brake About the Machine: Offered is a Weiler Condor in excellent condition. The machine is, of course, fully functional. This is a very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This later generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine on site under power.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with New 3-Axis Digital Readout from K&C, Straight from Training Workshop! Technical Data: >> Machine No.: 91-1814 Year of Manufacture: 1991 >> Centre Height: 165 mm >> Centre Distance: 750 mm Nsdpfxjw Nw Dqo Afascu >> Spindle Speeds: from 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Switchable Spindle Brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> New K&C 3-axis digital readout, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> Collet chuck, new, and new collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine mounts Safety features: electronic spindle guard, 2 emergency stop switches, change gear cover with limit switch, spindle brake About the machine: For sale is a Weiler Condor in excellent condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes operation even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout Nsdexu Hlaepfx Afascu Technical Data: - Year of manufacture: 1988 - Machine No.: 88-955 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: 22 to 2800 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock: MT 3 - Feeds from 0.015 to 0.46 mm/rev - Thread cutting: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Spindle brake can be engaged - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Features: - 3-axis Heidenhain digital readout - 1 piece new 3-jaw chuck with 2 sets of jaws - Collet chuck with collets from 3 to 30 mm, 40 collets in total, some duplicates - Multifix quick-change toolpost size B with 3 tool holders - Bed stop - Machine feet - Drill chuck - Live center Safety Equipment: - Lead and feed screw guard - 2 emergency stop switches - Spindle brake About the Machine: For sale is a used Weiler Condor 81 lathe, year 1988, in very good condition. The machine is, of course, fully functional. The lead and feed screws are fitted with protective covers for safety. A very robust and powerful machine. The 3-axis Heidenhain digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine under power at our premises.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears Ncodpfxeu Aftge Afaju About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev Ncjdpfxsvtp Eds Afasu >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Būklė: naudotas, Gamybos metai: 1999, Swing diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: W E I L E R LZS - Universal Lathe with Digital Readout Type PRIMUS VC Year of manufacture 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing diameter over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Stepless speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev Ncsdpfx Afjvm Dv Dsaju 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads Module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis and incremental Z-axis (compound slide) • Multifix-A quick-change toolpost • Equipped with a 3-jaw chuck from WEILER 140 mm, mounted • Machine base with tool storage, integrated control cabinet, cooling system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex stock – as inspected Payment : strictly net on collection – after receipt of invoice We look forward to your order. Further lathes of all sizes available from stock – please enquire.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, veleno skylė: 83 mm, tekėjimo skersmuo: 570 mm, sūpynės skersmuo virš skersinio vežimo: 340 mm, centro aukštis: 280 mm, veleno greitis (maks.): 2 500 aps./min, Mašina dėl masyvios konstrukcijos tinkama sunkiems tekinimo bei serijiniams darbams! TECHNINĖ INFORMACIJA Sūkimosi greičio diapazonas: 1–2 500 aps./min Sukimo momentas: 1 300–1 600 Nm Apsisukimo skersmuo virš lovos: 570 mm Apsisukimo skersmuo virš skersinio stalo: 340 mm Centru aukštis: 280 mm Atstumas tarp centrų: 2 000 mm Veleno perėjimo skersmuo: 83 mm (pasirinktinai 128 / 165 mm) Įrankių revolverio vietų skaičius: 8 Įrankių revolverio laikiklis: VDI 40 kotas Koniko diametras: 80 mm Kūgiškumas: MK5 Nodpfx Afsymx N Njascu MAŠINOS DUOMENYS Valdymo modelis: WEILER SIEMENS 810D Pagrindinis variklio galingumas: 20 / 17 kW (60 % / 100 % našumo) Matmenys ir svoris Matmenys (I x P x A): 3 850 mm × 1 850 mm × 1 750 mm Masės svoris: 4 200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Weiler Condor 81 Weiler Condor 81 Lathe with Heidenhain Digital Readout, year of manufacture 1992, in very good original condition. This machine comes from the training workshop of a renowned German mechanical engineering company. Ncsdpfjw T U Sgsx Afaou Technical Data: Year of manufacture: 2003 L + Z Lathe WEILER Type Condor 81 Center distance: 750 mm Swing over bed: 330 mm Center height over bed: 165 mm Swing over cross slide: 180 mm Center height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Quill travel: 110 mm Spindle speed: 45 - 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 Volt, 50 Hz Spindle speed via 16 gear steps Space required (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Accessories and Equipment: Three-jaw Röhm chuck Multifix quick-change toolpost Coolant system Heidenhain digital readout About the machine: We are offering a Weiler Condor 81 lathe with Heidenhain digital readout, year 1992, in very good condition. Of course, the machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs very quietly. This newer generation of lathes is very user-friendly and allows for producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see its condition for yourself. You can find further lathes from well-known manufacturers on our website.