Centro tekinimo staklės

WEILER Primus LZ

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Nsdpfxsrtd Uwo Aghjwp Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Sąlyga: naujas, Bernardo Lead and Feed Screw Lathe Master 180 including 3-axis digital readout Centre Distance: 1000 mm Centre Height: 180 mm Swing Over Bed: 360 mm Swing Over Gap*: 480 mm Swing Over Cross Slide: 220 mm Bed Width: 185 mm Spindle Bore: 51 mm Spindle Mount: DIN 55029, D1-5 Spindle Speed Range: (8) 70 – 2000 rpm Longitudinal Feed Range: (32) 0.052 – 1.392 mm/rev Cross Feed Range: (32) 0.014 – 0.380 mm/rev Metric Threads: (26) 0.4 – 7.0 mm Inch Threads: (34) 4 – 56 TPI Tailstock Quill Diameter: 42 mm Tailstock Quill Travel: 110 mm Tailstock Taper: MT 4 Motor Output S1 100%: 1.5 kW (400 V) Motor Input S6 40%: 2.2 kW (400 V) Machine Dimensions (W x D x H): 1920 x 750 x 1600 mm Approximate Weight: 540 kg * Removable gap length: 225 mm Scope of Delivery: • 3-axis digital readout i200 with LCD display • 3-jaw chuck DK11-200 mm / D5 • Face plate 200 mm / D5, per DIN 55029 • Fixed steady rest – max. passage diameter 70 mm • Travelling steady rest – max. passage diameter 50 mm • Coolant system • Initial fill with Shell Tellus 46 • Pull-out chip tray • Clamping plate 320 mm • Four-way tool post • Safety guard for four-way tool post • Safety slip clutch Nwodpfed Du Tijx Aghop • Micrometric longitudinal stop • Thread chasing dial • LED machine lamp • Reducing sleeve • Change gears • 2 centre points • Foot pedal with brake function (CE compliant) • Motor with electromagnetic brake (CE standard) • Machine stand

Gamybos metai: 1962, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine No.: 1790 Nwjdpfxjdl Uzko Aghsp General / Technical Data: Hydraulic horizontal internal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by oil and chip tray) Cutting speed: hydraulically adjustable, stepless from 1 m/min to 7 m/min Return speed: hydraulically adjustable, stepless from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without working area) Power supply: 380 V / 50 Hz / 15 A Hydraulic motor: 4 kW Accessories / Special Features: • The machine is equipped with a universal pull head for flat shanks • Refrigerant / lubrication system • Without tool feeder • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for manufacturing keyway slots. On request, broaching needles and mandrels can also be supplied. The machine is connected and ready for demonstration under power in our warehouse.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 211433, ruošinio svoris (maks.): 1 200 kg, Offered for sale is a Schaublin 135 lathe in good technical condition. The machine is fully operational and comes with accessories. All guideways are in good condition and the machine is geometrically sound. The slides all move smoothly and evenly. The machine was overhauled in 2002 and has been regularly maintained according to the manufacturer's specifications. Take the opportunity to inspect this machine on site. Nodpfx Agjv Rxhishowp

Sąlyga: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Nwjdov A Sqhepfx Aghsp Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed

Sąlyga: paruoštas naudoti (naudotas), veleno skylė: 84 mm, Echea lathe model AII with 5000mm between centres, swing over bed 750mm, swing over gap 1050mm, swing over carriage 500mm, spindle bore diameter 84mm, 12 motor speeds ranging from 8 to 850 rpm. Equipped with a 400mm universal 3-jaw self-centering chuck and a 600mm independent jaw chuck, complete with fixed and travelling steadies. The lathe comes with guards and is generally in good condition. Nodpfxou I Rl Es Aghswp

Sąlyga: naujas, New lathe with large spindle bore. Brand: KMS Model: CS6250C Centre distance: 1000 mm Swing over bed: Ø 500 mm Swing over cross slide: Ø 300 mm Swing in gap: Ø 710 mm Turning length in gap: 240 mm Bed width: 390 mm Spindle bore diameter: Ø 105 mm Spindle speeds: 12 steps (36 - 1600 rpm) Tailstock quill diameter: 75 mm Tailstock travel: 150 mm Tailstock taper: MT 5 Machine dimensions: approx. 2630 x 975 x 1270 mm (L x W x H) Machine weight: approx. 2100 kg Machine equipped with: Nsdpfjhhm Edex Aghowp - Longitudinal and cross feed - Rapid traverse for longitudinal and cross feed - Movable and adjustable stops for automatic longitudinal feed - Leadscrew for threading (Metric/Inch/Module/DP threads possible) - Quick-change toolpost, Multifix type - 2-axis digital readout (Brand: Sino) - 3-jaw chuck Ø 315 mm, 100 mm bore (Camlock) - 4-jaw chuck Ø 400 mm, 105 mm bore (Camlock) - Faceplate Ø 630 mm (Camlock) - Fixed steady rest Ø 120–260 mm - Follow rest Ø 20–80 mm - Coolant system.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 240 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 430 mm, centro aukštis: 215 mm, tekėjimo ilgis: 760 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 58 mm, bendras ilgis: 1 885 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 680 kg, quillo laikiklis: MK 4, Centre height: 215 mm Centre distance: 760 mm Spindle bore: 58 mm Spindle nose: DIN 55029 Camlock D6 Nwjdpfxecir Ans Aghep Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Weight approx. 1680 kg Equipment includes: - Hardened and precision-ground Z-axis guideways - Turcite coatings (on mating surfaces) of the tool and cross slides - Manual central lubrication with a pump for the saddle and cross slide - Complete coolant system with rear splash guard and carriage splash protection - Chuck guard - Feed rod with 3 adjustable cams - Machine lamp - Fixed centre - Set of machine leveling pads

Sąlyga: naudotas, Swing over bed: 250 mm Swing over cross slide: . mm Centre distance: approx. 400 mm Centre height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions: approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, including hard and soft jaws; Njdpfewa Dz Ejx Aghjwp Collet chuck system including collets 1-20 mm with 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with interlock.

Sąlyga: geras (naudotas), Gamybos metai: 2010, Centre Lathe Manufacturer: JET Type: GHB-1330 Year: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Nedjqwgzqopfx Aghswp Spindle bore: 38 mm Machine in good condition, from a training workshop. Machine documentation available.