Smeral Ekscentrinis Presas pirkti naudotą (7 256)

Būklė: naudotas, Pressure: 160 t Column gap: [to be specified] mm Stroke: 200 mm Table surface: 2040 x 840 mm Throat depth: 450 mm Strokes per minute: 30 - 55 spm Installation height: 450 mm Ram surface: 1700 x 800 mm Ram adjustment: 100 mm Total power requirement: 11 kW Bwjdpstqm Dgjfx Aa Dor Machine weight: approx. 21.1 t Space requirement: approx. 2.2 x 1.94 x H 3.66 m - Safe for hand feeding operations - Converted to West standard - Light barrier

Būklė: labai geros būklės (naudotas), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram bore: 40 mm Table through-hole: 240 x 140 mm Die height with max. stroke up and ram adjustment up: 360 mm Total power requirement: 4 kW Machine weight approx.: 3.41 t Required space approx.: 0.8 x 1.75 x 2.1 m The machine has been partially overhauled in our workshop as follows: - Disassembly, cleaning, and inspection - Table surface milled - New paintwork: machine in light gray/Enzian blue, ram assembly in orange - Shaft crack inspection carried out - Ortlinghaus KBK + additional brake dismantled, cleaned, inspected, new seals installed - Additional air accumulator - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with piping (previously manual lubrication points) Bwjdpfx Astrhf Aoa Der - New Herion press safety valve + maintenance unit - New Balluff cam switch - New two-hand control panel - New foot switch - Current accident prevention inspection (UVV) with brake time measurement - Machine safety for manual loading operations

Būklė: naudotas, Gamybos metai: 1992, Spaudimas: 25 t Išsikišimas: 375 mm Eiga: 8 - 80 mm Bjdpfxeykb Ebe Aa Dewr Eigos dažnis: 120 eigų/min Stūmoklio reguliavimas: 45 mm Bendras reikalingas galingumas: 1,5 kW Mašinos svoris apie 2,5 t - hidraulinė sankaba - fiksuotas stalas

Būklė: visiškai atnaujintas (naudotas), Pressure: 100 t Throat depth: 350 mm Stroke: 20 - 120 mm Table dimensions: 1100 x 700 mm Ram dimensions: 750 x 450 mm Ram adjustment max.: 90 mm Strokes per minute: 70 spm Variable strokes per minute: 20 - 120 spm Shut height (with ram at top dead center and ram adjustment at the top): 500 mm Through opening in table: 400 x 300 mm Through opening in clamping plate: 220 x 180 mm Frame opening to the rear: 450 x 300 mm Total power requirement: 11 kW Machine weight approx.: 11.8 t Space required approx.: 2.1 x 1.3 x 2.8 m Equipment: - Hydraulic clutch - Variable drive control via frequency inverter - Ram weight compensation - Automatic stroke adjustment - Hydraulic overload protection - Motorized ram adjustment Machine is overhauled in our facility as follows: - Complete disassembly, cleaning, and technical inspection - New paint - New seals - New V-belts - New control cabinet - New Balluff cam switchgear with ABB rotary encoder - New Unidor press force measurement Bwodpfx Ajtv N Ibea Dor - New control pendant with touch display - New control cabinet with ABB safety control - Side workspace enclosure with BWS Fiessler light curtain The machine is CE-compliant and receives a 1-year warranty from us after overhaul. The machine is safe for manual loading operations.

Būklė: naudotas, Gamybos metai: 1986, Pressure 40 t Reach 265 mm Stroke 8 - 95 mm Table dimensions 660 x 520 mm Ram dimensions 400 x 250 mm Ram adjustment 80 mm Strokes per minute 70 - 142 spm Total power requirement kW Machine weight approx. 4,500 kg Space requirement approx. 1.245 x 1.585 x 2.37 m Bwjdpfx Aaeumm Sqj Der - Table clamping plate

Būklė: naudotas, Gamybos metai: 1982, Spaudimo jėga: 63 t Išsikišimas: 315 mm Eiga: 8–120 mm Stalo plotas: 630 x 800 mm Montavimo aukštis: 560 mm Stūklio reguliavimas: 70 mm Ėjimų skaičius: 56/90 ėjimų/min. Stūklio plotas: 400 x 500 mm Bendrasis energijos poreikis: 6 kW Mašinos svoris: apie 5,5 t Reikalingas plotas: apie 1,5 x 2,2 x 2,75 m Toliau nurodyti darbai turi būti atlikti prie mašinos / Dalinis remontas: - Mašina bus visiškai išardyta ir patikrinta - Mašina bus nudažyta iš naujo Bwjdpet Ev Tnsfx Aa Dsr - naujas presavimo saugos vožtuvas - naujas atskiras valdymo spintos blokas su jutikliniu ekranu ir ABB saugos valdikliu - nauji velenų guoliai - prieš išsiuntimą atliekamas dabartinis UVV (Vokietijos nelaimingų atsitikimų prevencijos asociacijos) patikrinimas ir stabdymo laiko matavimas.

Būklė: naudotas, Spaudimas: 25 t Išsikišimas: 250 mm Eigos ilgis: 10 - 120 mm Bwsdpoykb A Tofx Aa Der Eigos skaičius: 120 eigų/min Stūmoklio reguliavimas: 45 mm Bendras galios poreikis: 1,5 kW Mašinos svoris apie 1,95 t - hidraulinė sankaba - reguliuojamas stalas

Būklė: naudotas, Spaudimas: 45 t Išsikišimas: 230 mm Eiga: 10 - 140 mm Bwsdoykb Ddepfx Aa Djr Eigos dažnis: 80 eigų/min Stūmoklio reguliavimas: 55 mm Bendras galios poreikis: 3,0 kW Apytikslis staklių svoris: 2,7 t - hidraulinė sankaba - reguliuojamas stalas - krumpliaratinė pavara

Būklė: naudotas, Slėgis: 35 t Iškyša: 300 mm Bwsdpfx Aasykb D Rj Der Eigos ilgis: 10 - 120 mm Eigos dažnis: 110 eigų/min Stūmoklio reguliavimas: 50 mm Bendras galios poreikis: 3 AG - reguliuojamas stalas

Būklė: naudotas, Gamybos metai: 1990, Spaudimo jėga 75 t Išsikišimas 290 mm Eiga 12–100 mm Stūklio reguliavimas 80 mm Eigos dažnis 140 eiga/min. Stalo paviršiaus plotas 830 x 560 mm Stūklio paviršiaus plotas 630 x 300 mm Bendrasios galios poreikis kW Mašinos svoris apie 6,1 t Reikalingas plotas apie m Įranga: - hidraulinis įrankio tvirtinimas, 4 stalai - stūklio svorio kompensavimas, gamintojas „Festo“ - centrinė tepimo sistema - motorinis stūklio reguliavimas Bsdpfst Ev T Iex Aa Dowr - hidraulinė sankaba - apsauginė plokštė - hidraulinis spaustuvų fiksatorius - kojinis jungiklis Valdymo spinta bus atnaujinta.

Būklė: geras (naudotas), Gamybos metai: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Bwedpfx Ajt Tqglea Dsr Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table opening: 100 mm Ram surface: 120 x 100 mm Installation height: 250 mm Total power requirement: 1.1 kW Machine weight approx. 1,150 kg Space requirement approx. 0.96 x 1.34 x 1.88 m - Positive-locking Ortlinghaus clutch - Not suitable for manual loading operations - The press has been tested in our facility and is delivered with a current UVV (accident prevention regulation) inspection certificate

Gamybos metai: 1969, būklė: naudotas, Pressure: 63 t Throat: – mm Stroke: 16 – 125 mm Table surface: 800 x 630 mm Ram adjustment: 70 mm Strokes in continuous operation: 80 strokes/min Max. distance table – ram: 417 mm Ram surface: 500 x 400 mm Clamping plate thickness: 70 mm Total power requirement: 6 kW Machine weight approx.: 5.5 t Space requirement approx.: — m - Tiltable - Ram equipped with break plate safety device - Table clamping plate - Ram adjustment via ratchet Bwedpfx Aoh Dfctea Dor - Balluff cam switchgear Machine is not safe for hand-loading operation!

Būklė: naudotas, Gamybos metai: 1990, Pressure 125 t Throat depth 360 mm Stroke 8 - 140 mm Installation height with max. stroke up and ram adjustment up 500 mm Ram adjustment 100 mm Ram surface 800 x 400 mm Table surface 1000 x 720 mm Clamping plate 990 x 670 mm Clamping plate thickness 80 mm Strokes per minute 60 Pin hole (depth x diameter) 90 x 50 mm Total power requirement 23 A Machine weight approx. 11 t Space requirement approx. WxDxH 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt-driven intermediate shaft - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorised ram height adjustment - Semi-automatic stroke adjustment - Manual top dead center correction - Fixed table - Reversing control (return run) - Electric stroke counter - Electric preset counter Bjdsyatx Eopfx Aa Dowr - Cam switchgear The machine is partially overhauled in our workshop as follows: - Disassembled, cleaned and fully inspected - New paintwork (customer color choice available) - New seals - New control cabinet with touchscreen, incl. machine wiring - Current press inspection

Būklė: naudotas, Gamybos metai: 1983, Pressure 25 t Outreach 225 mm Stroke 8 - 85 mm Bjdpfx Asumm Swsa Dowr Table dimensions 560 x 450 mm Ram dimensions 360 x 220 mm Ram adjustment 55 mm Stroke rate 80 - 160 strokes/min Total power requirement kW Machine weight approx. 2500 kg Space requirement approx. 1,135 x 1,365 x 2,145 m - Table clamping plate

Būklė: naudotas, Pressure: 100 t Throat Depth: 355 mm Stroke: 8 - 130 mm Table Area: 710 x 1200 mm T-Slots in Table: 3 Clamping Plate Thickness: 75 mm Strokes per Minute: 50/80 Ram Adjustment: 80 mm Ram Area: 450 x 560 mm T-Slots in Ram: 2 Bjdpfotqm Dhjx Aa Dowr Pin Hole (Depth x Diameter): 100 x 50 mm Max. Distance Table to Ram: 540 mm Clearance Between Columns: 400 mm Connected Load: 11.5 kW Machine Weight approx.: 9.0 t Machine Dimensions: 1.65 x 2.25 x 3.05 m - Increased installation height - Equipped with drawing cushion - Converted to safety control (Pilz PLC), safe for "manual loading operations on open tools"

Būklė: naudotas, Spaudimas 80 t Išsikišimas 320 mm Eiga 8 - 112 mm Stalo paviršius 830 x 600 mm Eigos dažnis 30 - 85 eigų/min Stumoklio paviršius 650 x 400 mm Stumoklio reguliavimas 71 mm Priveržimo plokštė 990 x 550 mm Stalo aukštis virš grindų 810 mm Stalo aukštis nuo žemės 800 mm Stovo praėjimas (priekyje) 680 mm Stovo praėjimas (gale) 520 mm Bendras galios poreikis 7,5 kW Staklių svoris apie 7,7 t Užimamas plotas apie 1,5 x 2,2 x 3,15 m Įranga: - su ratukų padėklu - fiksuotas stalas Staklės buvo/yra dalinai renovuotos: - Pilnas išmontavimas ir patikrinimas - Stalo ir stūmoklio paviršiai perfrezuoti - Naujos sandarikliai ir hidraulinės žarnos - Naujas pagrindinis variklis - Abu pagrindiniai guolių įvorės, trečiojo guolio įvorė ir švaistiklio įvorė nauji - Velenas apdirbtas ir įvorintas - Dažymas - Nauja valdymo spinta su PLC ir lietimui jautriu ekranu, laidų instaliacija Bwjdpfxjtqm Dmj Aa Der - Atnaujintas UVV patikrinimas su stabdymo laiko matavimu

Būklė: naudotas, Gamybos metai: 2007, Pressure: 200 t Throat depth: 510 mm Stroke: 16 - 160 mm Ram adjustment: 120 mm Table surface: 1500 x 1000 mm Table height above floor: 900 mm Pass-through opening in table: 800 x 250 mm Ram surface: 1000 x 700 mm Pin hole in ram: 65 x 110 mm T-slot width: 28 mm Adjustable stroke rate: 30 - 120 strokes/min Hydraulic unit oil capacity: 5 l Installation height (max. stroke, ram adj. top): 600 mm Installation height (stroke bottom, ram adj. top): 440 mm Total power requirement: 32.2 kW Machine weight approx.: 24 t Required space (WxDxH): 2.85 x 3.1 x 3.65 m - Hydraulic clutch - Fixed table - Hydraulic overload protection in the ram - Hydraulic connecting rod clamping - Motorized ram height adjustment, 120 mm, with digital display of set ram height, rapid and creep speed - Fully automatic stroke adjustment, adjustable range 16 - 160 mm - Ram weight compensation - Electronic top dead center correction - Planetary gearbox - Central oil circulation lubrication - Separate control desk with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return stroke) - Additional operating mode "setup/creep speed" - Electric stroke counter - Electric preset counter - Electric travel limitation of the connecting rod pin - Electronic cam controller - Infinitely adjustable drive (frequency-controlled) - 2 power sockets - Clamping plate - Temperature monitoring of main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of vibration-damping elements Additional equipment: Bwsdpfxovbk Rws Aa Dor Electronic roller feeder ebu EVX 500 Feed width: 10 - 500 mm Material cross-section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of rollers: 2 Roller diameter: 100 mm Intermittent ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Būklė: naudotas, Gamybos metai: 1998, Pressure: 80 t Outreach: 335 mm Stroke: 8 – 100 mm Strokes per minute: 60/90 Table area: 900 x 670 mm Through-hole in table: 280 x 200 mm Maximum installation height: 450 mm Ram adjustment: 80 mm Ram area: 700 x 450 mm Maximum tool dimensions: 700 x 450 mm Maximum tool weight: 140 kg Total power requirement: 11.07 kW Machine weight approx.: 6.5 t Space requirements approx., W x L x H: 1.72 x 2.0 x 2.82 m Equipment - Gear train - Hydraulic clutch - Large ram - Pneumatic ram weight compensation with air reservoir mounted on the right side of the frame - Oil lubrication, manufacturer: Vogel - Semi-automatic stroke adjustment - Hydraulic ball screw adjustment with manual clamping - Mechanical overload protection (shear plate) Bjdpfx Aouild Asa Dowr - Ram adjustment with Siko counter - T-slot table plate - Monitored ram holding device - Control cabinet mounted on console on right side of the machine - Foot switch - 1 set of vibration-damping elements - Operating manual / EC declaration of conformity The machine is technically overhauled in our facility and receives a current press inspection as well as - Oil change - Filter replacement - Replacement of hoses.

Būklė: naudotas, Gamybos metai: 1996, Pressure: 80 t Throat depth: 320 mm Stroke: 6 - 118 mm Strokes per minute: 30 - 80 spm Ram adjustment: 70 mm Table area: 830 x 610 mm Ram area: 650 x 400 mm Frame gap (towards rear): 630 mm Total power requirement: kW Machine weight approx. 8.1 t Space requirement approx. W 1.2 x D 1.9 x H 3.3 m Equipment/features: - with gear drive - fixed table - automatic stroke adjustment - automatic ram adjustment - hydraulic overload protection Bjdotycdkjpfx Aa Dswr - ejector - centralized grease lubrication - cover plate for drop hole - stepless speed control via frequency inverter - The machine will be technically overhauled and inspected in our facility and will receive a new control cabinet with safety control system and touchscreen - current accident prevention inspection (UVV) with brake time measurement

Būklė: naudotas, Pressure: 63 t Throat depth: 315 mm Stroke: 16 - 125 mm Max. distance between table and ram: 417 mm Ram adjustment: 70 mm Stroke rate: 80 strokes/min Table dimensions: 800 x 630 mm Ram surface: 500 x 400 mm Total power requirement: 6 kW Machine weight approx. 5 t Space requirement approx. 1.5 x 2.2 x 2.75 m The following works will be carried out on the machine / partial overhaul: - Machine will be disassembled and checked - Machine will be newly painted - New Vogel lubrication unit - New cam controller Bwsdpfx Astqm Dqsa Der - New control cabinet with touch panel and ABB safety control - Before delivery, a current accident prevention regulation (UVV) inspection and brake time measurement will be performed

Gamybos metai: 1979, būklė: naudotas, Pressure: 75 t Throat depth: 260 mm Stroke: 16–80 mm Table surface: 800 x 520 mm Distance table/ram: 350 mm Stroke rate – stepless: 50–250 strokes/min Ram surface: 400 x 300 mm Bwsdpfx Asfn Ap Doa Der Ram adjustment: 70 mm Total power requirement: 7.5 kW Space requirements approx.: 2.7 x 1.7 x 2.6 m Machine weight approx.: 4 t Through-hole in table: 260 x 180 mm - Pneumatic Ortlinghaus air clutch with auxiliary brake - Infinitely variable speed control via Stöhrer drive - Shear plate - Two-hand control - Additional clamping plate - Air reservoir tank for clutch - Oil circulation lubrication

Būklė: naudotas, Single-column eccentric press EBU type 75 SKU Machine no. P 4598462, year of manufacture 1962 Pressing force: 75 tons Throat depth: 300 mm Table size: 800 x 620 mm Drop hole: 325 x 225 mm Ram surface: 470 x 180 mm Clamping pin bore: Ø 40 mm Table height above floor: 845 mm Stroke adjustment: 16 - 140 mm Ram adjustment: 80 mm Maximum installation height: approx. 420 mm Strokes per minute: 60 + 105 spm Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection via rupture plate in the ram - Tool monitoring UNIDOR, type APS MINI - Mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - Strip width: 200 mm, feed length max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds via 2 V-belt stages on gear train - Two-hand operation - Simple swing-away working area guard - Table height adjustment in lowest position = spindle adjustment 50 mm below floor level - Control cabinet and operator panel for tool monitoring adjacent Bwjdpfx Ajdzqltja Dsr - Automatic central lubrication - 4 machine feet Required floor space (L x W x H): 2600 x 2300 x 2450 mm Weight: approx. 5.5 tons Good condition

Būklė: naudotas, Single-Column Eccentric Press WEINGARTEN Type ARP 100 Machine No. 122481 Year of manufacture: 1984 Pressing force: 100 tons Throat depth: 400 mm Table size: 920 x 660 mm Ram area: 700 x 450 mm Clearance (rear): 735 mm Stroke adjustment: 20 - 160 mm Ram adjustment: 80 mm Die height at 160 mm stroke: max. 355 mm (without bolster plate) Die height at 20 mm stroke: max. 425 mm (without bolster plate) Strokes per minute: 60 spm Bolster plate table area: 920 x 610 mm Bolster plate thickness: 90 mm Drop-through hole in bolster plate: Ø 210 / 180 mm Drop-through hole in machine table: Ø 210 / 180 mm Table height above floor: 800 mm (without bolster plate) T-slot width in table and ram: 22 mm Clamping shank bore: 50 mm Motor power: 11 kW Power supply: 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch-brake combination - Electrically adjustable ram with stroke counter - Clamping shank bore with clamping piece - Front crankshaft support bearing - Gear train in enclosed oil-bath gearbox - Two pneumatic ram compensation cylinders - Automatic central grease lubrication by WOERNER - Stroke release via electric foot switch or two-hand control console Bwedou Rwa Ijpfx Aa Dsr - Electrical control cabinet fixed to the machine - Operating manual and wiring diagram included - UVV compliance for manual loading/unloading Space requirements (L x W x H): 2200 x 1600 x 3250 mm Weight: 8.3 tons In good condition

Būklė: naudotas, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Bwsdpoi A A Tbsfx Aa Dor Very little-used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986 Like-new condition Pressing force: 60 tons Throat depth: 280 mm Table area: 740 x 560 mm Ram area: 385 x 200 mm Pass-through hole in table: 300 x 200 mm Table area (intermediate plate): 740 x 560 mm Pass-through hole in intermediate plate: Ø 103 mm Plate thickness (intermediate plate): 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height max.: 275 mm (with intermediate plate) Installation height max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 spm Motor output: 3 kW Drive power: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake controlled via cam disk - Stroke release via pneumatic foot switch - Overload protection with breaking plate in ram - Table height adjustment via 2 threaded spindles - Manual central lubrication (BEKA Lubrication Technology) - Operating manual and pneumatic diagram available Required space (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons Very good, like-new condition

Būklė: naudotas, Single-column eccentric press PELS – RICHTER Type PEKR 125 Machine no. 20684 Year of manufacture: 1967 Pressing force: 125 tons Throat depth: 430 mm Table size: 1100 x 750 mm Ram area: 890 x 650 mm Table opening: Ø 400 mm Stroke adjustment: 6 to 115 mm Ram adjustment: 100 mm Bwjdpfjfim Thox Aa Djr Installation height (max. stroke at top): max. 450 mm Clamping shank bore: Ø 50 mm Strokes per minute: 60 spm Table height above floor: 900 mm Motor power: 7.5 kW Electrical connection: 380 Volt, 50 Hz - Overload protection via breaking plate in ram - Pneumatic clutch-brake combination DESCH - Ram weight compensation cylinder - Manual ram adjustment - Two-hand operation - Cam switch mechanism - Vogele central lubrication - Stroke counter Required space (L x W x H): 2300 x 1450 x 3030 mm Weight: approx. 10 tons In good condition