Scharmann Horizontali Gręžimo Ir Frezavimo Staklė pirkti naudotą (51 373)

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Guedpfet Hw D Rex Aqloc Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts used in variable transmissions for automotive seat adjusters, window regulators, etc.

Būklė: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Guedjt Hwxbspfx Aqlsc Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Būklė: naudotas, Gamybos metai: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: ___ m F.E.H.L.M.A.N.N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 Serial no.: 16 085109 X-axis (longitudinal): 850 mm Y-axis (transversal): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./max. distance from vertical spindle to table surface: 140 / 690 mm Vertical and motorised adjustment travel of drilling head: 540 mm Drill spindle overhang approx.: 450 mm Spindle taper: SF 32 Drilling capacity in steel: 30 mm Maximum spindle stroke (quill, vertical): 210 mm Spindle speeds (stepless, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 – 8,000 mm/min. Drilling feeds, 6 automatic options: 0.03/0.07 to 0.4 mm/min. Rapid traverse XYZ: 4/8 m/min. Spindle drive power: 6 kW Total drive power approx.: 16 kW – 380 V – 50 Hz Weight approx.: 3,500 kg Accessories / Special equipment: Gsdpjt Hxa Hefx Aqlouc • HEIDENHAIN CNC – 2-axis path control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, thread cutting cycles, manual control device or electronic handwheel, RS 232 interface, etc. The drilling spindle axis (Z) can be activated manually or via CNC control. • Drilling depth can be preset using a 12-position turret stop, displayed digitally on the monitor. • Drilling head can be programmed via height positioning device to 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ballscrew spindles. • With quick-change tool system and various tool holders, various drill chucks, coolant system, etc. Condition: Good to very good – demonstration ready under power Delivery: Ex stock – as inspected Payment: Net – due on receipt of invoice.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, horizontalioji stiklo gręžimo staklė Gujdpfx Aeyub Azjqloc su ištraukiamu ritininiu stalu, 700 mm Staklių matmenys: Ilgis: 1850 mm, Aukštis: 1800 mm, Gylis: 1200 mm

Būklė: labai geros būklės (naudotas), padavimo ilgis X ašis: 700 mm, padavimo eiga Y ašimi: 350 mm, padavimo ilgis Z ašis: 475 mm, X ašies eiga: 700 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 475 mm, veleno greitis (maks.): 1 500 aps./min, veleno greitis (min.): 25 aps./min, plunksnos brūkšnys: 100 mm, stalo ilgis: 1 510 mm, stalo plotis: 350 mm, Cincinnati 2MK horizontalus frezavimo staklės su universalia vertikalia galva Modelis: 2MK Stalo plotas: 1510 x 350 mm Išilginis judėjimas: 700 mm Skersinis judėjimas: 350 mm Guedpfxeygk Drj Aqlsc Vertikalus judėjimas: 475 mm Veleno kūgis: 50 INT Veleno greitis: 25 – 1500 aps./min. Įrenginys komplektuojamas su: Horizontaliu arborsu ir jo laikikliu Kampinė dviguba lanksti galva

Būklė: geras (naudotas), Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery, but can be purchased additionally. The Deckel FP 2 LB universal milling machine stands out due to its extremely robust base body and is designed as a travelling column machine. This means that the machine maintains its precision even when machining heavy workpieces weighing up to 1000 kg. Another feature is the 45-degree slant bed. After removing the universal table, this design allows for the direct clamping and machining of V engine blocks with a 90-degree cylinder angle, such as American V8 engines. Additionally, the long X-axis travel of 800 mm is advantageous for this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital readout: 3-axis Heidenhain digital display Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 draw bolt thread S 20 x 2 Milling head type: Vertical milling head Spindle speed range: 40 - 2000 rpm Number of speed steps: 18 Table type: universal swivel/tilt table (± 45° / ± 15°) Clamping surface: 1000 x 520 mm T-slot size: 16 mm Gsdegyw S Tepfx Aqljuc Vise: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – both new and used – can be found in our shop! International shipping costs on request!

Būklė: geras (naudotas), Mikron WF31D Precision Milling and Drilling Machine Machine equipped with chip and splash guard enclosure Fitted with a Heidenhain TNC355 control unit Technical Specification Guodpfx Aqowiucfjlec The WF 31 D is a precision milling and drilling machine designed for series production and CNC training. The drive is via an automatically switchable step gearbox and Poly-V belt. The vertical spindle can extend by 90 mm; conversion from vertical to horizontal machining is possible. Ball screw drives with DC motors enable simultaneous feed movements. Guides are protected against dust, chips, and coolant. Technical Data Manufacturer: Mikron Model: WF31D Control: Heidenhain TNC 355 Longitudinal travel (X): 560 mm Cross travel (Y): 500 mm Vertical travel (Z): 400 mm Drive power: 3.3/4.0 kW Speed range: 40–4000 rpm Feed rate: 2–3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min Electrical Equipment Total installed rated power: 10.0 kW Installed usable power: 7.3 kW Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54 Max. permissible ambient temperature: +35 °C Relative humidity: 75 % Dimensions and Weight Width: 2,450 mm Length: 2,800 mm Height: 2,000 mm Net weight of the machine: approx. 2,570 kg Financing through our partner bank is available. komplett-konzept.leasingo.de You will find more new and used equipment in our shop! International shipping costs available on request!

Būklė: labai geros būklės (naudotas), Control: Heidenhain TNC 310 With indexing head Travel X/Y/Z: 500 / 250 / 160 mm W-axis travel: 480 mm Clamping surface (L x W): 885 x 320 mm Gusdpfewkrn Ijx Aqlsc Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Quick-change tool system: SF 32 Infinitely variable speed range: 9,200 rpm Drive power: 5 kW Required space (W x D x H): 1,850 x 2,550 x 2,400 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Heidenhain digital readout Fehlmann cross table KS 322 D Working area: Quill travel Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0 – 527 mm Guedpfx Aqowkrp Esloc Quick-change system SF 32 Work spindle: 2.9 kW Continuously variable speed range: 50 - 6300 rpm Clamping surface: 320 x 670 mm Dimensions and Weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight: approx. 850 kg

Būklė: labai geros būklės (naudotas), Heidenhain digital display. Fehlmann cross table: KS 255. Accessories: available. Working range: Quill travel Z-axis: 110 mm Travel of machine head: 450 mm Table to spindle nose: 0 – 527 mm Quick-change systems: SF 32 Working spindle: 2.9 kW Infinitely variable speed range: 50 - 6300 rpm Gjdpfow Hqdmsx Aqljuc Clamping area: 255 x 550 mm Dimensions and weight: Space requirement (W x D x H): 1.5 m x 1.35 m x 2.1 m Weight approx.: 850 kg

Būklė: labai geros būklės (naudotas), - Heidenhain digital display. - Accessories available. Travel distances: X-axis travel: 280 mm Gedpfxow Hqf Rs Aqlsuc Y-axis travel: 210 mm Cross table: KS 255 D Spindle speeds: 135 – 4,500 rpm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Control system: Heidenhain TNC 310 Accessories included Working area: X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Main drive: Infinitely variable spindle speed programmable: 20 – 4,500 rpm Tool holder: SK 40 Worktable: B/C-axis drive: manual Clamping surface: ø 700 x 500 mm T-slot spacing/size: 63/14H7 mm Rotary range: 360° Swivel range: +95° / -10° Dimensions: Length: 1800 mm (750 mm control unit) Guedpfx Ajp H S Uxjqljc Depth: 1800 mm Machine weight: 2,600 kg

Būklė: labai geros būklės (naudotas), Control: Heidenhain TNC 426 Dimensions Required installation space (WxDxH): 1.92 x 1.85 x 2.4 m Weight: approx. 2,400 kg Working Area Travel, longitudinal | X-axis: 500 mm Travel, cross | Y-axis: 255 mm Quill stroke (controlled) | Z-axis: 147 mm Quill stroke (manual) | Z-axis: 160 mm Machine head travel | W-axis: 500 mm Feeds / Rapid Traverses Speeds: Rapid traverse - X and Y axes: 1–11,000 mm/min - Z axis: 1–6,000 mm/min - W axis: 1–3,600 mm/min Feed forces - X and Y axes: 6,500 N - Z axis: 8,000 N Rapid traverses - X and Y axes: 11 mm/min - Z axis: 6 mm/min Measuring System Direct measurement via linear scale: X / Y / Z axes Resolution Indirect measuring system via rotary encoder: Z axis Resolution on X, Y, Z, and W axes: 0.001 mm Accuracy Positioning tolerance P (axes) X / Y: 0.005 mm Positioning scatter Ps (axes) X / Y: 0.003 mm Z / W: 0.005 mm Table Clamping surface (LxW): 885 x 320 mm Work area - T-slots: - Number: 5 - Width: 12 H8 mm - Spacing: 50 mm Permissible table load: 250 kg Table height above floor: 1,040 mm Clearance spindle nose to table (min.–max.): 0–120–620 mm Horizontal reach: 300 mm Working Spindle Tool quick-change system: SF 32 Tool change: hydraulic via push buttons - Repeatability: 0.002 mm - Changeover time (manual): approx. 5 s Spindle speed range (stepless): 50–9,000 rpm Drive power: 7.6 kW Max. torque: 65 Nm Godpfx Aotp S R Hjqleuc Machining Performance Drilling capacity: ø 25 mm Tapping: M20 Enclosure Semi-enclosure with sliding doors Coolant / Lubrication Coolant: - External tank, capacity: 100 l - Pump flow rate: 75 l/min Central lubrication system: Vogel

Būklė: labai geros būklės (naudotas), Control: Heidenhain TNC 124 Travel paths X/Y/Z: 450 / 260 / 120 mm W-axis travel: 450 mm Clamping surface (L x W): 770 x 320 mm Permissible table load: 100 kg Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Godpfx Aoipmmuoqlouc Feed rate X/Y: 1 – 2000 mm/min Tool quick-change system: SF 32 Stepless speed range: 100 – 9200 rpm Drive power: 5 kW Required space (W x D x H): 1500 x 1480 x 2330 mm

Būklė: labai geros būklės (naudotas), - Heidenhain digital readout - Accessories included Travel distances: X-axis travel: 280 mm Y-axis travel: 210 mm Cross table: KS 255 D Spindle speeds: 135 – 4,500 rpm Godpfxsv E D Tto Aqleuc

Būklė: labai geros būklės (naudotas), Heidenhain TNC 124 control system Travel ranges X/Y/Z: 450 / 260 / 120 mm W-axis travel range: 450 mm Clamping surface (L x W): 770 x 320 mm Permissible table load: 100 kg Distance table – spindle nose (min. – max.): 0 – 110 – 560 mm Feed rate X/Y: 1 – 2000 mm/min Tool quick-change system: SF 32 Gedpfx Aswk Edpoqleuc Stepless speed range: 100 – 9200 rpm Drive power: 5 kW Required space (W x D x H): 1500 x 1480 x 2330 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Vertikalus apdirbimo centras su važiuojančiu stovu ir 3 ašimis Gamintojas: UNITECH Vokietija Modelis: CFS 2 Pagaminimo metai: 2001 Valdymas: Heidenhain Eigos: X Y Z = 1500 x 300 x 300 mm Stalo dydis: 1800 x 350 mm Veleno galia ir apsukos: 6000 aps./min. Įrankio tvirtinimas: SK 40 Komplektacija: su vidiniu veleno aušinimu Guedeycfmyopfx Aqlsc Drožlių transporteris Konstrukcija: važiuojančio stovo tipo staklės

Būklė: naujas, Drilling capacity in steel (diameter): 25 mm Throat depth: 170 mm Drilling stroke: 50 mm Slotting cutter capacity: 16 mm Spindle taper: MT 3 Spindle speeds: 50 - 3000 rpm Transverse table travel: 280 mm Longitudinal table travel: 155 mm Table clamping surface: 500 x 180 mm Connection voltage: 230 V Max. distance between worktable and spindle nose: max. 320 mm Total power requirement: 0.8 kW Machine weight: approx. 150 kg Space requirement: approx. 670 x 550 x 910 mm Drill-milling machines: - digital depth and speed display - 2-speed gearbox - with fine adjustment and variable speed - including left/right switch - head swivels left and right Delivered with corresponding tools Gjdpfx Asvdldwjqlouc

Būklė: naujas, Drilling capacity in steel (diameter): 16 mm Throat depth: 170 mm Drilling stroke: 50 mm Slot milling capacity: 16 mm Spindle taper: MK2 Spindle speeds: 50 - 2250 rpm Gusdpfx Aqoupxmrolec Cross table travel: 320 mm Longitudinal table travel: 145 mm Table clamping surface: 500 x 140 mm Connected load: 230 V Total power requirement: 0.5 kW Machine weight approx.: 90 kg Required space approx.: 0.5 x 0.45 x 0.84 m Drilling and milling machine with: - Variable spindle speed - Digital depth display - Left/right rotation switch - Compound table - Pivoting spindle head - Manual feed via handwheel - Tool case with contents But without digital readout! Additional price for 3-axis digital readout: 499 EUR

Būklė: naujas, Drilling capacity in steel (diameter): 16 mm Throat depth: 180 mm Drilling stroke: 85 mm Gusdpfeupxcyox Aqlsc Spindle taper: MT 2 Spindle diameter: 47 mm Spindle speeds: 320 - 3300 rpm Table adjustment (cross): 230 mm Table adjustment (longitudinal): 100 mm Clamping surface on table: 420 x 155 mm Supply voltage: 230 V Maximum package size: 900 x 600 x 300 cm Total power requirement: 0.75 kW Machine weight approx.: 80 kg Dimensions (L x W x H): 0.7 x 0.7 x 0.8 m Drilling and milling machine equipped with: - Cross slide - Manual handwheel feed - Chip guard - 16 mm drill chuck - Mechanical MT tool clamping

Būklė: naujas, Drilling capacity in steel (diameter): 25 mm Throat depth: 175 mm Drilling stroke: 50 mm Slotting cutter capacity: 16 mm Spindle taper: MT 3 Spindle speeds: 50 – 3000 rpm Gusdpfeupxtfox Aqlec Table traverse (cross): 380 mm Table traverse (longitudinal): 175 mm Clamping surface (table): 700 x 180 mm Supply voltage: 230 V Max. distance between worktable and spindle nose: max. 320 mm Total power requirement: 0.75 kW Machine weight: approx. 150 kg Space requirement: approx. 670 x 550 x 910 mm Drilling and milling machine with large table SINO 3-axis digital readout Quill travel digital indicator 2 speed ranges Left/right rotation switch Head can swivel 90° left/right Spindle guard Incl. toolbox with various tools

Būklė: naujas, Drilling capacity in steel (diameter): 30 mm Throat: 200 mm Drilling stroke: 70 mm Slot milling capacity: 16 mm Spindle taper: MK3 Spindle speeds: 50 - 3000 rpm Table travel (cross): 565 mm Table travel (longitudinal): 220 mm Table clamping surface: 840 x 210 mm Supply voltage: 400 V Max. distance between work table and spindle nose: max. 470 mm Total power requirement: 1.1 kW Machine weight: approx. 230 kg Gedpfxeupxt Ej Aqlouc Space requirement: approx. 0.75 x 1.05 x 1.3 m Drilling and milling machine with large table SINO 3-axis digital display Quill stroke digital readout 2 speed ranges Left/right rotation switch Head swivels left/right 90° Mounting: MC 3 - B16 Drill chuck: 3 - 16 mm Spindle guard Machine base optional (€199) Includes toolbox with various tools

Būklė: naujas, Drilling capacity in steel (diameter): 35 mm Throat depth: 230 mm Drilling stroke: 125 mm Spindle mount: ISO 40 Spindle speeds: 115 - 1750 rpm Table traverse (cross): 560 mm Table traverse (longitudinal): 175 mm Table clamping surface: 1000 x 240 mm Max. distance between worktable and spindle nose: 375 mm Connection voltage: 400 V Total power requirement: 0.85/1.5 kW Machine weight approx.: 0.95 t Gsdpsu Imkdofx Aqljuc Required space (L x W x H): approx. 1.3 x 1.2 x 2.1 m Equipment: - 3-axis digital readout - Digital depth display - Motorized feed for X and Y - Left/right rotation - Emergency stop - Tilting drill head - Spindle guard - Machine lamp - Toolbox with contents

Būklė: naujas, Gręžimo našumas pliene (skersmuo): 32 mm Išsikišimas: 200 mm Gręžimo eiga: 70 mm Guodpfxoupxlbs Aqlec Pirštinės frezos talpa: 16 mm Veleno tvirtinimas: MK3 Veleno sūkių dažnis: 50–3000 aps./min Stalo skersinis poslinkis: 220 mm Stalo išilginis poslinkis: 425 mm Stalo tvirtinimo paviršius: 700 x 210 mm Maks. atstumas tarp darbinio stalo ir veleno nosies: 470 mm Bendra galingumo paklausa: 1,5 kW Apytikslis staklių svoris: 230 kg Reikalinga vieta apytiksliai: 0,75 x 1,05 x 1,2 m Gręžimo ir frezavimo staklės su galingu 2 pavarų varikliu. Prabangus valdymo skydelis. Tvirtinimas MC 3 – B16. Grąžtų patronas 3 –16 mm. Sukimosi krypties jungiklis (kairė/dešinė). Veleno apsauga. Tikslus reguliavimas. Paleidimo pleištas. Sriegta strypas įrankių įtvirtinimui Priklausantys įrankiai.

Būklė: naujas, Drilling capacity in steel (diameter): 16 mm Throat depth: 185 mm Quill stroke: 50 mm Godpfx Aqsurznwslsuc End mill capacity: 20 mm Spindle taper: MT 2 Spindle diameter: mm Spindle speeds: 100–1500 / 200–3000 rpm Table traverse (cross): 175 mm Table traverse (longitudinal): 280 mm Table clamping surface: 500 x 180 mm Supply voltage: 230 V Total power requirement: 0.85 kW Machine weight: approx. 0.12 t Space requirements: approx. 0.86 x 0.6 x 0.9 m Drilling and milling machine with: - Variable spindle speed - Cross slide - Spindle head swivels left/right 90° - Feed via handwheel