Optimum Optimum Mt 100 pirkti naudotą (27 137)

Būklė: naudotas, Gamybos metai: 2023, Optimum Optiturn TX 5216V – used machine. Machine Features: - Machine bed made of heavily ribbed cast iron - One-piece machine base made of steel - High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron - Precisely machined carriage - Shafts on needle bearings, all components lubricated in an oil bath - Bed guides hardened and precision-ground - All electronic controls centrally accessible - All feed gearbox gears made of hardened steel - Handwheels decoupled and tested according to EN 23125 - Dual-channel safety electronics - Switches with life cycle calculation, tested according to EN ISO 13849 - Complete lead screw and feed rod cover - Full work area illumination - Service-friendly removable rear panel - Hardened and ground faceplate spindle ensures outstanding accuracy and durability - High cutting performance allows for substantial material removal during roughing operations - Energy chain for gentle cable and hose management - Lockable chip guard travels with the carriage, featuring integrated position display and coolant hose, manually adjustable - No change gears required - Equipped with safety mechanism to prevent simultaneous operation of threading and feed mechanisms - Electronic feed cut-off for Z-axis - Coolant system with separate coolant tank with level indicator and oil separator; easy and complete draining and cleaning according to DIN standard - Electric position cut-off with four-way stop - Three-jaw chuck included as standard - Quick-change tool post SWH 7-C - Tool holder 32 x 130 Type D for 25 mm square tool - Large spindle bore Dimensions and Weights: - Length approx.: 2,925 mm - Width/depth approx.: 1,195 mm - Height approx.: 1,930 mm - Weight approx.: 2,470 kg Working Area: - Centre height: 260 mm - Centre distance: 1,600 mm - Swing over bed: 520 mm - Swing over cross slide: 324 mm - Bed width: 350 mm Spindle Speeds: - Number of speed ranges: 2 x 3 steps - Speed range: 12 – 1,800 rpm Electrical Data: - Output power (motor): 7.5 kW - Total connected load: 5.5 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Coolant System: - Coolant pump power: 60 W Data Type Generated: Utilization data Ncsdpfx Asx Hdq Tscpsr Tailstock: - Taper: MK 5 - Quill travel: 180 mm - Quill diameter: 72 mm Spindle: - Spindle nose: Camlock DIN ISO 702-2 No. 8 - Spindle bore/bar capacity diameter: 80 mm - Tool post: SWH 7C - Spindle taper: MK 7 Thread Cutting: - Metric pitch: 0.5 – 15 mm/rev - Number of metric pitches: 55 - Imperial pitch: 60 – 2 TPI - Number of imperial pitches: 55 - Diametral pitch: 120 – 4 DP - Number of diametral pitches: 55 - Module threads: 0.25 – 7.5 mm x π - Number of module threads: 55 Travel: - Top slide travel: 170 mm - Cross slide travel: 340 mm - Carriage travel: 1,400 mm Feed: - Longitudinal feed range: 0.05 – 1.5 mm/rev - Number of longitudinal feeds: 55 - Cross feed range: 0.025 – 0.75 mm/rev - Number of cross feeds: 55

Būklė: naudotas, Gear motor, electric motor, geared electric motor Njdpfecwuvrex Acpecr - Speed: 24 rpm - Power: 0.55 kW - Design: hollow shaft - Hollow shaft diameter: 28 mm - Protection rating: IP 54 - Dimensions: 425/160/H220 mm - Weight: 21 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Pjovimo skersmuo 128 mm Juostinio pjūklo ilgis / mm Njdpfx Aoxbh Hfscpjcr Stalo aukštis / mm

Būklė: naujas, Gamybos metai: 2010, Outreach 235 mm Column diameter 60 mm Table size 290 x 290 mm Motor power 1 kW Speed 50 - 4000 rpm Machine weight approx. 72 kg OPTIMUM Bench Drill OPTIdrill DX 17V - Column diameter 60 mm Product length approx. 425 mm - Product width/depth approx. 481 mm Product height approx. 910 mm Drilling capacity - Drilling capacity steel (S235JR) 16 mm Continuous drilling capacity steel (S235JR) 13 mm - Thread cutting steel (S235JR) M8 Drill table - Drill table working area length 290 mm Drill table working area width 290 mm - Drill table T-slot size 10 mm Drill table T-slot number 2 - Drill table T-slot spacing 100 mm Distance chuck - drill table min. 98 mm - Distance chuck - drill table max. 315 mm Ncjdow Spc Ropfx Acpsr Speed range - Speed range 50 - 4000 min⁻¹ Speed regulation electronically adjustable Electrical data - Drive motor power 1.0 kW Connection voltage 230 V - Mains frequency 50 Hz Machine base - Distance chuck - machine base min. 0 mm - Distance chuck - machine base max. 385 mm - Machine base working area length 290 mm Machine base working area width 280 mm - Machine base T-slot size 14 mm Machine base T-slot number 2 - Machine base T-slot spacing 100 mm Standards and approvals - Standard DIN EN 55011 EMC class C2 Spindle - Quill stroke 60 mm Spindle taper MT 2 - Outreach 235 mm Packing dimensions: - Length 540 mm - Width 420 mm - Height 1,040 mm - Gross weight 87 kg - Net weight 72 kg Order No.: 3020170 New machine from year of manufacture 2010 in original packaging Bench drill OPTIdrill DX 17V with infinitely variable speed control. Machine highlight – the menu-driven operation for drilling/tapping modes. Description: - Optimum power transmission via aluminum belt pulleys - Emergency stop pushbutton - Drill spindle with precision ball bearings - Guaranteed concentricity accuracy less than 0.03 mm measured at the drill spindle - Dirt- and water-resistant, easy-to-clean membrane keypad with high-contrast OLED display - Glare-free LED lighting on the left and right integrated into the drill head. No disruptive shadows - Tapping mode - Language selection in the display panel: DE-EN-FR-RU - Digital reference point - Digital part counter - Audible signal when drilling depth is reached - Reduced speed in tapping mode - Height-adjustable chuck guard with microswitch for maximum protection - Precision-machined drill table with parallel T-slots, precision surface-finished - Swiveling drill table - Massive base plate with parallel T-slots Features: For drilling and tapping, the machine automatically sets the optimum speed for the tool after the user specifies the drill diameter and material.

Būklė: geras (naudotas), Radial fan, chip extraction blower, fan, extraction unit, chip blower - Motor power: 18.5 kW - Speed: - rpm - Airflow rate: approx. 7,000 m³/h - Total pressure: approx. 2,800 Pa - Inlet connection: Ø 280 mm - Outlet connection: Ø 350 mm Ncodpfx Acjb Ilw Toper - Dimensions: 1120/840/H930 mm - Weight: 284 kg

Būklė: beveik kaip naujas (parodų įrenginys), Super practical heavy-duty table, good quality Welding positioner with 100 kg load capacity Max. load: 100 kg horizontal Max. load: 50 kg vertical Rotation speed: approx. 1–7 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 345 mm Turntable height: 415 mm Turntable tilt angle: 0–90° Motor power in operation: 0.12 kW Dimensions: 500 x 470 x 415 mm Power supply: AC 110V / 220V 50/60Hz Optional with chuck / quick-release chuck for an extra €180 Ncedpfx As Ugnbocpjr Free delivery: €90

Būklė: geras (naudotas), Super practical heavy-duty table, high quality Welding positioner with 100 kg load capacity Max. load: 100 kg horizontal Max. load: 50 kg vertical Rotation speed: 0.5-9 rpm Rotation direction: left and right Turntable speed: manually adjustable Ncjdpjcctnaefx Acpor Turntable diameter: 345 mm Turntable height: 415 mm Turntable tilt angle: 0-90° Motor power during operation: 0.12 kW Dimensions: 500 x 470 x 415 mm Power supply: AC 110V / 220V 50/60Hz Optional chuck available – surcharge €160 Free delivery – €80

Būklė: naudotas, galia: 74 kW (100,61 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, kėlimo aukštis: 17 550 mm, Gamybos metai: 2025, veikimo valandos: 170 h, Svoris be krovinio: 11 740 kg Variklio markė: Deutz Nsdpfx Acex Ty D Aepecr Kėlimo galia: 4 000 kg Didžiausias greitis: 25 km/val. Serijos numeris: MAN00000P01153455 Priekinių padangų būklė: 0 Užpakalinių padangų būklė: 0 Transportavimo matmenys (I x P x A): 6,15 x 2,36 x 2,45 m Dėl papildomos informacijos kreipkitės į PFEIFER GROUP.

Būklė: naudotas, galia: 74 kW (100,61 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, kėlimo aukštis: 17 550 mm, Gamybos metai: 2025, veikimo valandos: 73 h, Savaiminis svoris: 11 740 kg Ncsdsx Ty Dpjpfx Acpsr Variklio markė: Deutz Kėlimo galia: 4 000 kg Didžiausias greitis: 25 km/h Serijos numeris: MAN00000E01154522 Priekinių padangų būklė: 0 Galinės padangų būklė: 0 Transporto matmenys (I x P x A): 6,15x2,36x2,45 m Daugiau informacijos suteiks PFEIFER GROUP.

Būklė: naujas, Swing diameter: 560 mm Turning length: 1910 mm Swing diameter over cross slide: 355 mm Swing diameter in bed gap: 790 mm Centre height: 280 mm Turning length in bed gap: 170 mm Spindle speeds: 12 (25–1600) rpm Tailstock taper: MT 5 Quill stroke: 180 mm Quill diameter: 75 mm Spindle mount: DIN ISO 702-2 No. 8 Spindle bore: 80 mm Spindle taper: MT 7 Longitudinal feed: 35 / 0.059 – 1.646 m/min Face feed: 35 / 0.020 – 0.573 m/min Total power requirement: 8.5 kW Machine weight: approx. 2560 kg Space requirement: approx. 3450 x 1150 x 1650 mm Item no. 3462170 Heavy-duty lathe distinguished by high flexibility, precision, and cost-effectiveness. Equipped with DPA 31 Plus digital position display and quick-change tool post. Description: - Hardened and ground Z-axis guideway - Guaranteed spindle nose runout accuracy = 0.015 mm - Spindle mount Camlock DIN ISO 702-2 No. 8 - Leadscrew cover - Precisely machined cross slide - All guideways adjustable via gib strips - Forward/reverse operation on cross slide via shift spindle - Dual-channel safety electronics - Central lubrication in cross slide - Compound rest swivelling range ±90° Nodpfxsucgr Is Acpocr - Main spindle runs in oil bath - Shafts and gears run in oil bath - Gear wheels easy-running, hardened, ground, with two adjustable precision tapered roller bearings - Switch with life cycle calculation, tested to EN ISO 13849 - Handwheels with adjustable fine calibration 0.04 / 0.02 mm - Safety handwheels with disengagement function to EN23125 on X and Z axes - Gears and shafts hardened and ground, running in oil bath on precision bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed rapid-change feed gearbox - Emergency stop punch button, motor protection switch, lockable main switch - Emergency stop foot pedal - Tailstock offset for taper turning ±10 mm - Tailstock quill and handwheel with adjustable fine calibration 0.025 mm; quick, simple, and tool-free adjustment via clamping lever - Energy chain for gentle cable and hose guidance - Heavily ribbed, induction-hardened, and precision-ground grey cast iron prism bed - Coolant system with separate tank, fill level indicator, and oil separator; easy, complete draining and cleaning per DIN - Adjustable leadscrew dial scale Scope of supply: - Fixed steady rest, max. passage Ø 165 mm - Travelling steady rest, max. passage Ø 95 mm - LED machine lamp - TH 5615D-TH 5630D: Reducing sleeve MT 7/MT 5 - TH 5620V: Reducing sleeve Ø113 mm / MT 5 - Fixed centre MT 5 - Fixed and revolving centre MT 5 - Quick-change tool post 7-C - Tool holder 32 x 150 Type D for square tools - Thread dial indicator - Initial machine fill with quality oil - Change gear set - Operating tools Special accessories included: - OPTIMUM 3-jaw chuck, centric clamping, Ø315 mm, Camlock DIN ISO 702-2 No. 8 (Item no. 3442768)

Būklė: naujas, Swing diameter: 420 mm Turning length: 1,500 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 590 mm Center height: 210 mm Turning length in bed gap: 260 mm Spindle speeds: 16 (45-1,800) rpm Tailstock taper: MT 4 Quill stroke: 120 mm Quill diameter: 50 mm Spindle nose: DIN ISO 702-2 No. 6 Spindle bore: 52 mm Spindle taper: MT 6 Longitudinal feed: 17 / 0.05 - 1.7 m/min Cross feed: 17 / 0.025 - 0.85 m/min Total power requirement: 4.6 kW Ncedpfxsk Egrpo Acpor Machine weight approx. 1,340 kg Space requirement approx. 2,440 x 915 x 1,375 mm Fully equipped lead- and feed-screw lathes. TH 4215 with digital position display DPA 21 / 3462070 - Hardened and ground Z-axis guideways - Spindle mounting Camlock DIN ISO 702-2 No. 6 - Precisely machined carriage - Handwheels with adjustable fine graduations 0.04 / 0.02 mm - Four-way tool post - All guides adjustable via gib strips - Compound slide travel range ±90° - Guaranteed spindle nose runout accuracy better than 0.015 mm - Main spindle runs in oil bath - Gearwheels smoothly running, hardened and ground, supported by two adjustable precision tapered roller bearings - Handwheels decoupled and tested in accordance with EN 23125 - Two-channel forward/reverse switch tested according to EN 23125 - Switches with lifecycle calculation, tested according to EN ISO 13849 - All metric threads from 0.2 to 14 mm/rev and all inch threads from 72 to 2 TPI selectable via control levers without changing gears - Forward/reverse switchable on bed slide via leadscrew - Central lubrication on bed slide - Base and machine bed cast in one piece from Meehanite casting - Leadscrew cover - Emergency stop device with foot pedal - Safety handwheels with disengagement function on X and Z axes - Tailstock adjustable by ±10 mm for taper turning - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment via clamping lever - Deep-ribbed prism bed, induction hardened and precision ground from grey cast iron - Coolant system with separate coolant tank, level indicator and oil separator; easy and complete draining and cleaning according to DIN - LED machine lamp in chip guard Models TH 4210D and TH 4215D with digital position indicator DPA21: - User-friendly membrane keypad, splash proof, sealed and anti-glare - Glass scales Scope of delivery: - Fixed steady rest, capacity Ø 15 - 145 mm - Travelling steady rest, capacity Ø 10 - 75 mm - LED machine lamp - Reducing sleeve MT 6 / MT 4 - Fixed center MT 4 - Change gear set - Position stop with fine adjustment - Initial fill with quality oil - Operating tools Including special accessories: OPTIMUM 3-jaw chuck, centrically clamping, Ø 250 mm Quick-change tool post SWH5-B set

Būklė: naujas, Swing diameter: 360 mm Turning length: 1000 mm Swing diameter over bed slide: 360 mm Centre height: 180 mm Nedpfx Acsw U U Tmspjcr Spindle speed: 70-2400 rpm Total power requirement: 2.2 kW Machine weight: approx. 680 kg Overall dimensions: approx. 2000x1500x900 mm Equipment: -Hardened and ground Z-axis guideway -Guaranteed spindle nose runout accuracy = 0.015 mm -Spindle mount Camlock DIN ISO 702-2 No. 5 -Motor protection switch -Main motor with electric brake -Right/left-hand rotation can be switched at the bed slide -Dual-channel safety electronics -Switch tested with lifecycle calculation according to EN ISO 13849 -Perfectly true-running main spindle ensures high load capacity via mounted precision taper roller bearings -Safety device prevents simultaneous operation of threading and feed mechanisms -Safety handwheels with disengagement function on X and Z axes -All gears in the feed gearbox are made of steel, hardened and ground -Shafts mounted on needle bearings, all components lubricated in an oil bath -Easy feed operation control -One change gear position -Control cabinet with Optimum control -Coolant pump with coolant tank and fill-level indicator. Tank removable for easy cleaning -LED machine lamp built into the machine housing -Sturdy steel machine base -Emergency stop mushroom switch left and right -Lockable main switch Special accessories: Includes 3-jaw chuck Includes quick-change tool holder

Būklė: naudotas, Bitte geben Sie Ihr Angebot ab. Preis ohne Verpackung und Transport; Zahlung im Voraus. Ncedpfxjwk Dwnj Acpsr Sie müssen uns ein Preisangebot unterbreiten, wenn Sie an der Maschine interessiert sind. Die Übergabe erfolgt an unserem Standort. Lieferbedingungen: EXW Cugir, Rumänien Der Käufer kann beim Abbau der Maschine unterstützen. Der Käufer ist für den Transport der Maschine verantwortlich. Wir übernehmen nur das Verladen der Maschine auf den Anhänger/LKW mit Gabelstapler oder Kran.

Būklė: naujas, Brushes - Diameter Ø 250 mm Brush width 40.0 mm Ncedpfexaamnsx Acpsr Speed range 2850 rpm Operating voltage 400 volts Total power requirement 1.3 / 1.8 kW Machine weight approx. 36.0 kg Space requirement approx. 415 x 467 x 356 mm Features: - Deburring of single parts and small batches - Deburring of straight round, rectangular and square tubes, as well as flat material - Heavy-duty, durable industrial design - Equipped with maintenance-free motor - Long service life and smooth running thanks to balanced rotor - Fitted with quality ball bearings - Storage surface for safety glasses - Includes 1x multipurpose wire brush, wire thickness 0.35 mm - Operating manual

Būklė: naudotas, Gamybos metai: 2011, X eiga 1100 mm Nsdpfeyk Ifhex Acpecr Y eiga 610 mm Z eiga 610 mm Heidenhain 530 valdymas Įrenginio svoris apie 7800 kg

Būklė: naujas, Band Saw Machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Njdpfodynpcjx Acpocr Condition: New machine Cutting capacity (round): 225 mm Cutting speed: 20 – 90 m/min Standard equipment includes: - Horizontal vice - Length stop - Automatic shut-off at end of cut - Chip removal brush - Coolant system - Operating manual

Būklė: naujas, Gamybos metai: 2025, For information on delivery times and current daily prices, please inquire directly. Industrial Motor Ncodpfx Acjq T Ruhoper Quiet-running spindle thanks to new spindle design Machine operation with safety electrics operating at 24V DC Guaranteed spindle run-out accuracy ≤ 0.02 mm measured at the drill spindle Forward/reverse rotation Precision spindle bore Control panel with user-friendly, dirt- and water-resistant membrane keypad Speed display Separate emergency stop push button Thread cutting function Precisely machined, stable drill table with diagonal T-slots and perimeter coolant channel, tiltable sideways by ±45° and rotatable by 360° Digital depth gauge Integrated LED machine light in the drill head V-belt cover with safety switch Thick-walled steel column for high load capacity and stability Massive, large-sized base plate with T-slots Heavy-duty design throughout the entire machine

Būklė: naujas, Gamybos metai: 2025, For information on delivery times and current daily prices, please contact us directly. Dimensions and Weights: Length (product): approx. 1760 mm Width/Depth (product): approx. 745 mm Height (product): approx. 1320 mm Weight (net): approx. 469 kg Max. height (product): approx. 1590 mm (DPA) Working Areas: Ncjdpfx Acoq T R Aajpor Centre height: 165 mm Centre distance: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 216 mm Bed width: 190 mm Speed Range: Number of speed ranges: 9 steps Speed range: 65 – 2000 rpm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar capacity: diameter 38 mm Toolpost maximum mounting height: 16 mm Spindle taper: MK 5 Tailstock: Tailstock taper: MK 3 Tailstock quill stroke: 100 mm Tailstock quill diameter: 38 mm Threads: Metric thread pitch: 0.4 – 10 mm/rev Number of metric threads: 29 Imperial thread pitch: 56 – 4 TPI Travel: Cross slide travel: 90 mm Compound slide travel: 168 mm Bed slide travel: 850 mm Feed: Longitudinal feed range: 0.02 – 0.4 mm/rev Number of longitudinal feeds: 24 Cross feed range: 0.01 – 0.2 mm/rev Number of cross feeds: 32

Būklė: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Weight (net): approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter in gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Nedpfx Aeq Ukbpocpjcr Connection voltage: 400 V Mains frequency: 50 Hz Coolant system Coolant pump power: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Max. tool holder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Thread Leads: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DP Number of diametral threads: 50 Module pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travels: Cross slide travel: 125 mm Compound slide travel: 285 mm Bed carriage travel: 1805 mm Feeds: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Būklė: naujas, Gamybos metai: 2025, For information on delivery times and up-to-date prices, please inquire directly. Dimensions and weights: Column diameter: 150 mm Length (product): approx. 880 mm Width/Depth (product): approx. 595 mm Height (product): approx. 2445 mm Weight (net): approx. 550 kg Drilling performance: Drilling capacity steel (S235JR): 40 mm Continuous drilling capacity steel (S235JR): 35 mm Thread cutting in steel (S235JR): M30 Drill table: Drill table working area length: 530 mm Drill table working area width: 530 mm Drill table T-slot size: 18 mm Number of drill table T-slots: 3 Drill table T-slot spacing: 125 mm Drill table rotation: 360° Drill table tilt: ± 90° Max. load capacity drill table: 250 kg Max. spindle-to-table distance: 740 mm Min. spindle-to-table distance: 130 mm Speed range: Speed range: 30 – 2430 rpm Number of speed ranges: 4 steps Speed control: electronic Electrical data: Drive motor power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Ncedpfjq T Ry Ujx Acper Machine base: Max. spindle-to-base distance: 1210 mm Machine base working area length: 435 mm Machine base working area width: 445 mm Machine base T-slot size: 18 mm Number of machine base T-slots: 2 Machine base T-slot spacing: 150 mm Spindle: Quill stroke: 170 mm Spindle taper: MT 4 Throat: 350 mm Quill feed: automatic Quill feed rate: 0.1 – 0.2 mm/rev Number of quill feed steps: 3 Motor(s): Coolant pump drive motor power: 100 W

Būklė: naujas, Gamybos metai: 2025, New machine. Please enquire for the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2,129 mm Width/Depth (product): approx. 1,046 mm Height (product): approx. 1,687 mm Net weight: approx. 645 kg Electrical Data: Drive motor power: 3 kW Ncjdjrah S Hjpfx Acpor Connection voltage: 400 V Line frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3,770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: Hydraulic via push button Semi-automatic operation: Automatic Cutting Capacity: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° rectangular upright (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° rectangular upright (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° rectangular upright (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° rectangular upright (solid material): 180 x 220 mm

Būklė: labai geros būklės (naudotas), Liebisch Type: K1000 M-TR / 4203.6101 USED Liebisch K1000 M-TR Constacon – Manual Chest Device Corrosion/Condensation Test Chamber (Chamber volume: 1000 l) Item Description: For sale is a used Liebisch K1000 M-TR, a robust and high-quality chest-type device for performing condensation water tests. Ideal for laboratories, quality control, or industrial applications. Technical Data & Features Model variant: Constacon K 1000 M-TR – Condensation water test chambers without ventilation Chamber volume: approx. 1000 liters Operating mode: Manual (Type M-TR) External dimensions (W × D × H): 2600 × 1120 × 1210 mm Internal chamber dimensions (W × D × H): 1535–1425 × 800–780 × 660–650 mm Test standards: For condensation (Constacon): DIN 50958, DIN EN ISO 6270-1/-2 Nsdpfsw Tbdpjx Acpecr Control: Simple manual control panel – parameters such as temperature and operating mode are set directly on the device. Temperature control: PID-regulated, typical setpoints: Condensation tests: approx. 40°C (up to max. 50°C) Heating time: about 1 hour Weight: approx. 400 kg Condition: used Scope of delivery: (See image) (Specifications are subject to change and errors excepted!) Any further questions can gladly be answered by phone.

Būklė: naudotas, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as the control and evaluation software for ZwickRoell materials testing machines. It enables standards-compliant testing procedures, logs measurement data, and supports traceability, etc. Windows 11 Compatibility: The ZwickRoell testing software (particularly testXpert III) supports current Windows platforms, making its use with Windows 11 possible and intended. Item Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) This system comes from a laboratory setting and was used for mechanical material testing at ambient and high temperatures. All units are pre-owned, well maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Max. Test Force: 100 kN AC Drive 4 kW, widened floor-standing version (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, Current draw 9 A Working Area: Height 1,765 mm, Width 1,030 mm Crosshead Speed: 0.0005 – 1000 mm/min Positioning Accuracy: < 2 µm Noise Level: ≤ 70 dB(A) Max. Test Force (Fnom): 100 kN Drive: AC Drive 4 kW (widened floor-standing version, W) Test Force Range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Supply Voltage: 400 V / 50–60 Hz / 3Ph+N+PE Current Draw: 9 A Power Consumption: 5.0 kVA Load Frame Height: approx. 2.32 m Working Area Height: 1,765 mm Working Area Width: 1,030 mm Machine Weight: approx. 1,820 kg Crosshead Speed: 0.0005 – 1000 mm/min Positioning Accuracy: < 2 µm Noise Level: ≤ 70 dB(A) Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High Temperature Furnace Max. Temperature: 1200°C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal Force: 100 kN Protection Class: IP67 Precise force measurement according to ISO 7500/1 Ncjdoxt Hn Sspfx Acpjr Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (see photos) - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) - Connecting cables and mounting materials (as available) (Technical specifications subject to change and errors excepted!) Should you have any further questions, we are happy to assist you by phone.

Būklė: naujas, IDAM RI11-3P-3250x175-HD1-0-0-0-Prim torque motor MP 009523, unused, 100% fully functional, scope of delivery as per photos Ncjdpfxei D Idxo Acpsr

Gamybos metai: 2008, būklė: naudotas, bendras svoris: 75 kg, Pristatymo sąlygos: FCA Pegnitz Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100 % išankstinis mokėjimas prieš mašinos atsiėmimą, grynasis Ncedpfx Ajwyfm Necpsr