Mora Mytos pirkti naudotą (2 946)

Būklė: naudotas, Gamybos metai: 2026, Chain Trencher WOODGRAIN GF-1500 max 12/15 HP TRENCH DIMENSIONS: 600 x 100 MM The WOODGRAIN GF-1500 chain trencher is a professional machine designed for trenching for cables, pipes, irrigation, digging ditches for water supply installations, or irrigation systems. Thanks to its precision, speed, and compact dimensions, it can easily create trenches near fences or other objects, even in hard-to-reach places and very tough soil! Only one operator is required. Machine Specifications: - CE Certificate, Technical Documentation: YES - Engine displacement: 420cc - Fuel: Petrol - Efficiency: 60m/h - Digging width: 100mm - Digging depth: 150, 300, 450, 600mm - Teeth: 27 carbide teeth - Chain length: 2000mm - Chain speed (max): 550m/min - Tyre: 145/7.0-6 - Height: 1100mm - Length: 2100mm - Width: 720mm - Gross weight: 188 kg Engine technology: four-stroke, single-cylinder, air-cooled, OHV (overhead valve) - Engine displacement (cm3): 420 - Cylinder: Cast iron sleeve - Cylinder bore (mm): 90.0 - Stroke (mm): 66.0 - max 3600 rpm - Fuel tank capacity (l): 6.6 - Oil system capacity (l): 1.1 - Dry engine weight (kg): 31.0 - Dimensions: length (mm): 499 - Dimensions: width (mm): 370 - Dimensions: height (mm): 443 - Max engine power (EPS*): 15 HP *EFFECTIVE POWER SOLUTIONS Engine features: Kjdpfx Acsy S U Hpotjlt - OHV technology – optimum performance for longer engine life and greater fuel efficiency - Lo-Tone PRO Muffler – Lowest audible noise level (significantly reduced dB) - Double air filters – prevents airborne particles from entering the engine (protection) - Throttle regulation – adjusts speed to provide optimal power under tough conditions - Cast iron sleeve – reinforcement and durability for resistance to wear and heavy use with improved oil control - Double ball bearings – provide greater durability and extend engine life - Float carburetor – ensures proper fuel dosing, which improves starting and fuel savings - High torque – more power, higher efficiency! - Protective guard against ejected debris from the trench NOTE!!! Machine is a customer return, refurbished. NO WARRANTY!

Būklė: naujas, Gamybos metai: 2026, Technical Specifications TURNING DIAMETER OVER BED: 360 mm TURNING DIAMETER OVER CROSS SLIDE: 150 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100–2000 rpm SPINDLE BORE: 51 mm SPINDLE NOSE: MT5 NUMBER OF TOOLS: 8 TOOL SIZE: 20x20 mm TAILSTOCK QUILL: MT3 MAXIMUM TAILSTOCK TRAVEL: 100 mm Kjdpfx Acsizw E Astslt MOTOR POWER: 5.5 kW DIMENSIONS: 1815 x 1300 x 1600 mm NET WEIGHT: 1300 kg Available Equipment • SINUMERIK 808D control (Polish language) • SIEMENS servo drives • 1 driven tool • HYDRAULIC 3-jaw chuck • 8-position turret head • Set of soft jaws • Hydraulic tailstock • Coolant system • Automatic lubrication system for gearbox and guides • 24V halogen lighting • Technical documentation in Polish • CE declaration Listed price is NET. Transport costs are not included. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Būklė: naujas, Gamybos metai: 2026, The lathe is ideally suited for efficient and precise machining of metal parts as well as other materials. The machine features capabilities for machining internal and external cylindrical surfaces, face surfaces, tapered, semi-circular surfaces, and threading. The bed is a solid cast iron construction, resistant to vibrations. The guides are induction-hardened and ground. Technical data TURNING DIAMETER OVER BED 320 mm TURNING DIAMETER OVER CARRIAGE 160 mm DISTANCE BETWEEN CENTERS 750 mm SPINDLE SPEED 100-2500 rpm SPINDLE BORE 46 mm SPINDLE NOSE MT5 NUMBER OF TOOLS 6 TOOL SIZE 16x16 mm MAXIMUM DIAMETER OF WORKPIECE THROUGH SPINDLE 44 mm TAILSTOCK QUILL MT3 MAXIMUM TAILSTOCK TRAVEL 100 mm MOTOR POWER 3 kW DIMENSIONS 2370 x 1420 x 2000 mm NET WEIGHT 950/1300 kg Available equipment SINUMERIK 808D control unit in Polish SIEMENS servo drives 3-jaw hydraulic lathe chuck 6-position turret head Set of soft jaws Hydraulic tailstock Cooling system Kjdoi Apg Uepfx Actslt Automatic lubrication system for gears and guides 24V halogen lighting Technical documentation in Polish CE declaration The listed price is NET (excluding VAT). Price does not include transport costs. For more information, please contact us by phone or email. We also invite you to visit our website to view our full offer.

Būklė: naujas, Gamybos metai: 2026, CORMAK CL300 Pulsed Cleaning Laser 300W CORMAK CL series pulsed cleaning lasers are industrial devices designed for fast, precise, and contactless removal of contaminants from metal, non-metal, and wooden surfaces. Depending on application needs, three power variants are available – CL200, CL300, and CL500 – all based on pulsed JPT MOPA fiber sources, ensuring high process stability, a broad range of parameter adjustments, and compatibility with both delicate details and more demanding surfaces. Technical specifications: Dimensions (W x H x D): 260 x 460 x 490 mm Weight: 31 kg Laser source brand: JPT Fiber interface: QCS Operating mode: MOPA Laser wavelength: 1064 nm Maximum pulse energy: 5 mJ Fiber length: 5 m Laser pulse frequency: 1–3000 kHz Pulse duration: 13–500 ns Klodpfx Ajy Sgn Ssctst Laser spot size: 7 ± 1 mm Laser line length: 0.01–150 mm Laser line width: 0.01–150 mm Process gas: none Scanning area (lens): 130 × 130 mm, F254 Cooling: air-cooled Scanning speed: 0–30,000 mm/s Operating temperature: 10–30°C Operating humidity: < 70% non-condensing Operating voltage: AC 230 V, 50/60 Hz CORMAK cleaning lasers effectively remove rust, paint coatings, lacquers, operational deposits, oxides, oil residues, resins, and other tough contaminants. With adjustable pulse energy, frequency, and duration, the process can be tailored for both precision, selective cleaning of molds, dies, tools, and precision parts as well as for efficient preparation of larger surfaces for further processes (welding, painting, bonding). The non-contact nature of operation minimizes the risk of mechanical damage, microcracks, or substrate deformation. Utilizing JPT sources in MOPA mode provides a wide range of frequency and pulse width adjustments, allowing for optimal energy density matching to contaminant type and base material. The long fiber optic cable increases freedom of operation at greater distances from the main unit, which is highly valued by users working on large structures, production lines, or components mounted in place (steel structures, molds, facades, machine parts). All models operate with a wavelength of 1064 nm, guaranteeing high efficiency on typical industrial materials—structural steels, stainless steels, aluminum alloys, and many other technical substrates. The CL series units are air-cooled and require neither process gases nor abrasives, simplifying installation, reducing operating costs, and making the cleaning process more environmentally friendly. High scanning speeds and adjustable beam parameters shorten processing times compared to traditional methods such as sandblasting, shot blasting, or chemical cleaning, while ensuring repeatable results and a high-quality surface finish post-cleaning.

Būklė: naujas, Gamybos metai: 2026, CORMAK OS-4000S is an industrial welding fume extractor designed for the efficient removal of welding fumes, dust, and fine contaminants generated during welding and related activities. The OS4000S features a new, lower-profile housing. The unit operates locally—directly at the workstation—therefore contaminants are captured before they can disperse throughout the hall. This significantly improves workplace comfort, visibility in the welding zone, and supports occupational health and safety standards. Specifications: Kledpfx Aoy Sgc Aoctot Model: OS4000S Power Supply: 400 V Power Output: 4.0 kW Airflow: 3,000–4,000 m³/h Operating Pressure: 3,050–2,600 Pa Filtration Efficiency: 99.00% Number of Filter Cartridges: 4 pcs Filter Specification: Ø325 × 600 mm Filter Material: Polyester Filter Cleaning Method: Pneumatic, pulse jet Dust Bin Capacity: 50 l Noise Level: ≤ 78 dB(A) Dimensions: 900 × 900 × 1,950 mm Why choose the OS-4000S? - High extraction performance – effective fume and dust capture near the welding arc. - Large surface area cartridge filtration – highly effective separation of fine particles. - Automatic pneumatic filter cleaning – stable operation with minimal maintenance downtime. - Dust bin – hassle-free and quick emptying with no mess. - Simple operation – user-friendly controls and easy access to serviceable components. Efficient filtration and constant suction power The OS-4000S uses a multi-stage filtration system based on cartridge filters. This enables the unit to effectively capture fine dust and welding fume particles. Additionally, the pulse-jet cleaning system (pneumatic) shakes dust off the filter surfaces, which: maintains consistent extraction performance, extends filter service life, reduces suction losses during intensive use. Comfort and safety at the workstation Extracting contaminants directly at the source provides immediate benefits: less fume in the operator’s workspace, improved visibility of the weld seam and more stable working conditions, a cleaner shop floor and reduced dust accumulation on machines/installations. Applications The CORMAK OS-4000S is ideal for: MIG/MAG, TIG, MMA welding operations, metalworking and maintenance tasks in production environments, grinding/deburring close to the workstation, light cutting/machining processes where dust and fumes are generated.

Būklė: naujas, Gamybos metai: 2026, CORMAK OS-4000M is an industrial, mobile welding fume extractor designed for the effective removal of welding fumes, dust, and fine contaminants generated during welding and related operations. The OS4000S features a new, lower housing design. The device operates locally—at the workstation—so that contaminants are captured before they spread throughout the workshop hall. This directly improves working comfort, visibility in the welding area, and helps maintain occupational health and safety standards. Specifications: - Model: OS4000M - Power supply: 400 V - Power: 4.0 kW - Airflow: 3,000–4,000 m³/h - Operating pressure: 3,050–2,600 Pa - Filtration efficiency: 99.00% - Number of filter cartridges: 4 - Filter specification: Ø325 × 600 mm - Filter material: polyester - Filter cleaning method: pneumatic, pulse-jet - Dust bin capacity: 50 l - Noise level: ≤ 78 dB(A) - Dimensions: 900 × 900 × 2,300 mm Why choose the OS-4000M? - High extraction efficiency – effective suction of fumes and dust near the welding arc. - Large surface cartridge filtration – high separation efficiency for fine particles. - Automatic pneumatic filter cleaning – stable operation without frequent servicing interruptions. - Mobile construction – easy movement between workstations (workshop/production). - Dust collection bin – quick and convenient emptying with minimal mess. - Simple operation – clear controls and quick access to consumable components. Efficient filtration and constant suction power The OS-4000M utilizes a multi-stage filtration system using cartridge filters. This enables effective capture of fine welding dust and fumes. Additionally, the pulse-jet (pneumatic) cleaning system "shakes off" dust from the filter surfaces, which: Kedoy Sgbrjpfx Actolt - Maintains consistent extraction performance - Extends filter lifespan - Reduces drops in power during heavy-duty operation Workplace comfort and safety Extracting contaminants directly at the source provides immediate benefits: - Less fume in the operator’s workspace - Improved visibility of the weld and more stable working conditions - Cleaner hall and less dust settling on machinery and installations Applications CORMAK OS-4000M is ideally suited for: - MIG/MAG, TIG, MMA welding - Metalworking and servicing in production environments - Grinding/deburring near the workstation - Light cutting/processing tasks where dust and fumes are generated.

Būklė: naujas, Gamybos metai: 2026, The CORMAK H - 260 SA Automatic Column Band Saw is a high-performance machine designed for automatic cutting cycles of bars, pipes, and profiles made from steel, cast iron, and non-ferrous metals. A robust body and heavy-duty saw frame combined with a column design ensure excellent rigidity and an exceptional level of stability during the cutting of even the most challenging materials. The saw is equipped with a PLC controller and a user-friendly touchscreen interface. This saw allows for operation in both manual and automatic modes. Manual Mode enables all operations to be performed manually from the machine’s control panel. Automatic Mode – once the machine is started, the entire cutting cycle, i.e., clamping the workpiece in the vise, feeding it to the set length towards the saw blade, lowering and raising the saw arm to the required height after the cut, takes place automatically, without the need for operator intervention. Cutting parameters such as the number of cut pieces, their dimensions, saw blade speed, and arm descent rate are set on the control panel. The machine will automatically stop at the end of the programmed series, in the event of a blade breakage, or in case of other faults detected by the machine’s control system. The machine body is a cast iron component mounted on a rigid, heavy-duty frame. The enclosure houses the hydraulic unit, coolant tank with pump, and swarf conveyor. The blade drive uses an inverter-controlled motor, allowing for smooth and wide-range speed adjustment. The hydraulic blade tensioner provides optimal working conditions. In the event of blade breakage, the machine stops automatically. Maximum cutting performance and extended blade life are ensured by the cooling system and a cleaning brush. A hydraulic material feeder delivers a fully automatic working cycle. The controller, equipped with an LCD display, enables programming of all saw functions, indicates material end, reports faults, and provides data on the number of cuts after the programmed cycle. Maximum feed length per single stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. The innovative design and manufacture of CORMAK semi-automatic and automatic band saws according to ISO:90001 and ISO:140001 standards guarantee safety, quality, and reliability. Reliable operation is further assured by the use of motors licensed by ABB, a world-renowned industry leader. Technical Data Cutting range: Ø260 or 260 x 260 mm Blade: 3150 x 27 x 0.9 mm Cutting speeds: 40/60/80 m/min Motor: 2.2 kW Hydraulic power unit: 0.75 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Load capacity: 1500 kg Dimensions: 1600 x 1800 x 1550 mm Weight: 1000 kg Maximum cutting range Angle 0º ø260 | 260 × 260 mm Kljdpfx Asiz S I Hectot Standard Equipment - Automatic cycle operation - Arm position memory function - Built-in hydraulic unit - Vise position memory function - Variable cutting speeds - Driven blade cleaning brush - Cooling system - Bimetal band saw blade - CE Declaration of Conformity - User manual (DTR) in Polish and English For more information, please visit our website.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 5 672 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 100 mm, laisvas kėlimas: 2 000 mm, apkrovos centras: 600 mm, kuro tipas: dujos, stiebo tipas: dupleksas, statybinis aukštis: 2 900 mm, variklių gamintojas: G.M., pavaros tipas: hidrostatinis, šakių laikiklio plotis: 1 340 mm, šakių ilgis: 1 200 mm, šakės plotis: 120 mm, šakės storis: 50 mm, padang padangų: 100 procentas, Priekinės padangos tipas: pilnos gumos padangos (juodos), priekinės padangos dydis: 23X10-12, galinės padangos tipas: pilnos gumos padangos (juodos), galinės padangos dydis: 355X65-15, bendras svoris: 9 800 kg, tuščias svoris: 6 800 kg, bendras aukštis: 2 550 mm, bendras ilgis: 2 100 mm, bendras plotis: 2 300 mm, spalva: geltonas, Įranga: CE žymėjimas, kabina, padėklų šakės, visų varančiųjų ratų pavara, šoninis poslinkis, 🔶 COMBILIFT C3000XL – 2011 – 5672 MTH – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for immediate operation. Zero compromise. This COMBILIFT C3000XL is more than just a machine—it’s a guarantee of smooth, reliable, and interruption-free logistics. Designed for demanding conditions and fully serviced, both technically and cosmetically, this forklift is presented in as-new condition and available for immediate deployment. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG (gas) 💪 Lifting capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully overhauled, ready to work 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Total height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Ideal applications: 📚 Narrow-aisle warehouses 🪵 Steel, timber and pipe industries 📏 Long load handling 🏭 Indoor and outdoor use Kljdpfxjy Tnfnj Actjt FT LOGISTICS – Quality you can rely on. Service you can trust.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 5 672 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 100 mm, laisvas kėlimas: 2 000 mm, apkrovos centras: 600 mm, kuro tipas: dujos, stiebo tipas: dupleksas, statybinis aukštis: 2 900 mm, variklių gamintojas: G.M., pavaros tipas: hidrostatinis, šakių laikiklio plotis: 1 340 mm, šakių ilgis: 1 200 mm, šakės plotis: 120 mm, šakės storis: 50 mm, padang padangų: 100 procentas, Priekinės padangos tipas: pilnos gumos padangos (juodos), priekinės padangos dydis: 23X10-12, galinės padangos tipas: pilnos gumos padangos (juodos), galinės padangos dydis: 355X65-15, bendras svoris: 9 800 kg, tuščias svoris: 6 800 kg, bendras aukštis: 2 550 mm, bendras ilgis: 2 100 mm, bendras plotis: 2 300 mm, spalva: geltonas, Įranga: CE žymėjimas, kabina, padėklų šakės, visų varančiųjų ratų pavara, šoninis poslinkis, 🔶 COMBILIFT C3000XL – 2011 – 5672 MTH – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for immediate operation. Zero compromise. This COMBILIFT C3000XL is more than just a machine—it’s a guarantee of smooth, reliable, and interruption-free logistics. Designed for demanding conditions and fully serviced, both technically and cosmetically, this forklift is presented in as-new condition and available for immediate deployment. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG (gas) 💪 Lifting capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully overhauled, ready to work 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Total height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Ideal applications: 📚 Narrow-aisle warehouses Kledpfxey Tm Une Actjt 🪵 Steel, timber and pipe industries 📏 Long load handling 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.

Būklė: naudotas, Gamybos metai: 2007, tekėjimo ilgis: 530 mm, tekėjimo skersmuo: 360 mm, veleno skylė: 65 mm, veleno greitis (maks.): 4 000 aps./min, 2 ašių CNC tekinimo staklės Mori Seiki 2050 Dura Turn (Japonija) Valdymas – Fanuc! Griebtuvo dydis: 200 mm / 8 colių Maksimali tekinimo skersmuo: 360 mm Maksimalus pjovimo ilgis: 530 mm Veleno skylės skersmuo: 65 mm Veleno galia / didžiausias sūkių skaičius: 13,5 kW/4000 aps./min / 18,1 AG/4000 aps./min Veleno tipas: A2-6 Klodpfx Acey Stfdetet Revolveris – Įrankių stotelių skaičius: 12 X ašies greitis: 24 000 mm/min / 945 colių/min Z ašies poslinkio greitis: 24 000 mm/min / 954 colių/min Su staklėmis pateikiama: - Griebtuvas galinė atrama - Zondas - Drožlių transporterio įrenginys - Dokumentacija Staklių svoris: 3950 kg

Gamybos metai: 2020, būklė: naujas, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and enhance the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It has been designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, thereby saving money and improving wash quality. This is crucial, as the apparent savings obtained in systems that do not employ these solutions can ultimately result in significantly higher costs associated with the disposal of chemicals and waste, which will inevitably be greater. Additionally, attention must be given to maintaining the required bath parameters. Research and development efforts have allowed us to engineer a car wash system with an optional detail drying function, where after washing, hot air is blown by a fan to dry components. Kledefz I Hxspfx Actot The car wash is equipped with an advanced system for creating custom macro programs, which, depending on the number of tanks, can each consist of up to 10 steps. These sequences can be repeated, their order rearranged, and more. Each tank features its own icon and designation, enabling intuitive operation for the user. Optionally, the tanks can be fitted with bath replenishment systems, allowing refilling either between processes or at the end of a cycle, for example. • Controls mounted on a swivel arm for improved operator access • PLC microprocessor control system • 7” touch control panel • Significantly higher number of spray nozzles compared to other solutions • (Option) Drying function available after washing • Capability to create custom advanced programs • Advanced damper system constructed from acid-resistant sheet steel, double-secured with limit switches • Control system for tightly closing and fully opening flaps • To minimise fluid mixing, separate lines, nozzles, and tanks for each treatment • Smart control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Gamybos metai: 2020, būklė: naujas, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and enhance the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying. It has been designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, thereby saving money and improving wash quality. This is crucial, as the apparent savings obtained in systems that do not employ these solutions can ultimately result in significantly higher costs associated with the disposal of chemicals and waste, which will inevitably be greater. Additionally, attention must be given to maintaining the required bath parameters. Research and development efforts have allowed us to engineer a car wash system with an optional detail drying function, where after washing, hot air is blown by a fan to dry components. Kedpjfz Nblefx Actjlt The car wash is equipped with an advanced system for creating custom macro programs, which, depending on the number of tanks, can each consist of up to 10 steps. These sequences can be repeated, their order rearranged, and more. Each tank features its own icon and designation, enabling intuitive operation for the user. Optionally, the tanks can be fitted with bath replenishment systems, allowing refilling either between processes or at the end of a cycle, for example. • Controls mounted on a swivel arm for improved operator access • PLC microprocessor control system • 7” touch control panel • Significantly higher number of spray nozzles compared to other solutions • (Option) Drying function available after washing • Capability to create custom advanced programs • Advanced damper system constructed from acid-resistant sheet steel, double-secured with limit switches • Control system for tightly closing and fully opening flaps • To minimise fluid mixing, separate lines, nozzles, and tanks for each treatment • Smart control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Gamybos metai: 2020, būklė: naujas, ROMER® is the largest manufacturer of powder coating equipment in Poland and one of the largest in Europe. ROMER® consists of over 10,000 manufactured units that are used in more than 45 countries worldwide. ROMER® produces individual technological devices for powder coatings as well as complete, fully automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. Kedpfx Acjfzq Rystolt We provide warranty and post-warranty service for the equipment we sell, with a full range of spare parts available.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Klodpfefz Apqjx Actet Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Kodpefz Ndyjfx Actjlt Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. Kedpfx Aefzkrnjctslt New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). Kljdpoflrc Ssfx Actet - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2020, būklė: naujas, 7" Touch Panel The large color touch panel is aesthetically pleasing and provides comfortable and intuitive operation. All key parameters can be set directly on it. Memory for 20 Programs with 10 Events It is possible to store up to 20 programs and activate up to 10 consecutive time-temperature events, arranged within the heating curve. This is especially required for more demanding processes. Ksdpfx Asfy Txyoctolt Gas / Oil Consumption Data Consumption is calculated based on the burner settings. This function allows you to estimate the cost of each specific cycle, plan consumption, and monitor personnel. Dual-Channel Recorder with USB Cycle Parameters Each furnace is equipped with a recorder that logs all ignition parameters, including two temperature channels—similar to a flight data recorder—onto a USB stick. The system also allows analysis of monthly/daily reports, including media consumption and performance. Every heating cycle, each time the door opens, is tracked for several years. Such a dedicated solution is not offered by any other manufacturer. It is a system developed from scratch by our programmers: automatic smoke extraction flue The chimney can be programmed to open several minutes before the end of the firing process to vent the chamber. It can be remotely controlled from the control panel and does not need to be operated mechanically as with most systems. Minute-by-Minute End Time Forecast The cycle has started—how long will it last? If we calculate the heating dynamics, the system will display the remaining duration on the screen. To open, simply pull the door. The lock features adjustable pressure on the door. To close, just push it shut—the lock catches the door and retracts it automatically. To minimize heat loss in the hall when the door is opened, a hood is installed above the door to divert part of the heat elsewhere. The MTS system was developed to provide true readings of the oven chamber temperature. Standard measurements are based on a single temperature reading, which is often inaccurate. MTS is a multi-sensor system, with sensors located at the furthest points of the chamber. The multi-zone heating system ensures a previously unmatched firing quality.

Gamybos metai: 2020, būklė: naujas, An automatic car wash system is a solution that enables you to reduce costs, improve quality, and enhance the efficiency of the surface preparation process. Klsdefy T Rcepfx Actot The automatic car wash is equipped with a set of pumps for spraying. It has been designed to ensure that as little liquid as possible is carried over into subsequent processes after washing, thereby saving money and improving wash quality. This is crucial, as the apparent savings obtained in systems that do not employ these solutions can ultimately result in significantly higher costs associated with the disposal of chemicals and waste, which will inevitably be greater. Additionally, attention must be given to maintaining the required bath parameters. Research and development efforts have allowed us to engineer a car wash system with an optional detail drying function, where after washing, hot air is blown by a fan to dry components. The car wash is equipped with an advanced system for creating custom macro programs, which, depending on the number of tanks, can each consist of up to 10 steps. These sequences can be repeated, their order rearranged, and more. Each tank features its own icon and designation, enabling intuitive operation for the user. Optionally, the tanks can be fitted with bath replenishment systems, allowing refilling either between processes or at the end of a cycle, for example. • Controls mounted on a swivel arm for improved operator access • PLC microprocessor control system • 7” touch control panel • Significantly higher number of spray nozzles compared to other solutions • (Option) Drying function available after washing • Capability to create custom advanced programs • Advanced damper system constructed from acid-resistant sheet steel, double-secured with limit switches • Control system for tightly closing and fully opening flaps • To minimise fluid mixing, separate lines, nozzles, and tanks for each treatment • Smart control – in the event of a power outage or sudden shutdown, fluids cannot mix • Fully automatic operation

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Klsdofz A H Depfx Actet Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Kodpfx Asfzkqmsctslt Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Kedpefz U Tiofx Actolt Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Būklė: naujas, Gamybos metai: 2026, Set including THEOR 20 INVERTER Screw Compressor and N20S Refrigerant Air Dryer. The CORMAK THEOR series screw compressor, a Polish brand, represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, ergonomic and robust construction, as well as high performance ensure efficient and trouble-free operation. Additional dual filtration at the dryer! SET INCLUDES: - THEOR 20 Compressor with inverter (version equipped with inverter) Klodpfx Acemqlqdetot - N20S Refrigerant Air Dryer The set does not include an air receiver! Option to purchase air receiver separately. Technical specifications THEOR 20 COMPACT: Compressor: Motor power: 15 kW Dryer: Motor power: 0.69 kW General parameters: Capacity at 6 bar: 1800 l/min Capacity at 8 bar: 1700 l/min Capacity at 10 bar: 1600 l/min Outlet: G3/4” The listed price is NET. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to visit our website for the full offer.

Būklė: naujas, Gamybos metai: 2026, CORMAK OS3500 is a mobile welding fume extractor designed for efficient removal of fumes and exhaust gases directly at the source. The unit combines strong suction power with high airflow, and thanks to its sound-insulated fan chamber, it operates quietly and smoothly. Additional advantages include the integrated pneumatic filter cleaning system, airflow adjustment at the extraction inlet, and robust, industrial-grade construction. Automatic filter cleaning – consistent performance The CORMAK OS3500 also emphasizes user convenience and stable performance over time. For this reason, it features an automatic pneumatic filter cleaning system. In practice, this means the filter is regularly 'pulsed' clean of accumulated contaminants without the need for frequent manual intervention. Kjdpfx Acjygt Utotelt The benefits are twofold: firstly, the extractor maintains a consistent level of efficiency; secondly, you reduce maintenance downtime and operating costs. In a production environment, this is highly significant, as unplanned downtime or loss of suction directly impact workflow and workplace conditions. Adjustable extraction power matched to operations Another advantage is the ability to adjust fume and exhaust flow at the extraction inlet. This feature allows you to tailor extraction power to actual needs—less for short spot welds, more for continuous long welding, or for grinding operations. Adjustment directly at the extraction point enables quick, operator-friendly settings without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and work comfort (for example, when working with small details where excessive suction could hinder manipulation). Robust design and mobility The OS3500 is built for daily use, so high-quality workmanship is a priority. The solid construction ensures reliable operation in workshop and industrial settings—where equipment is frequently moved, works long hours, and must endure intensive operation. Mobility allows the extractor to be easily used across various workstations without the need for a fixed installation throughout the facility. This practical solution is ideal for companies with several workstations, as well as those that often change workflows or handle varied projects. Wide range of applications In practice, the OS3500 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other dust- and fume-generating processes. Its primary function is to improve working conditions by reducing airborne contaminants in the operator's breathing zone. This solution benefits team health, work comfort, and positively influences the perception of your facility as a modern and safe workplace. Technical specifications Type Airflow (m3/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *The set does not include a power cable or plug, as connection infrastructure and customer requirements may vary.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, veikimo valandos: 5 672 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 100 mm, laisvas kėlimas: 2 000 mm, apkrovos centras: 600 mm, kuro tipas: dujos, stiebo tipas: dupleksas, statybinis aukštis: 2 900 mm, variklių gamintojas: G.M., pavaros tipas: hidrostatinis, šakių laikiklio plotis: 4 000 mm, šakių ilgis: 1 200 mm, šakės plotis: 120 mm, šakės storis: 50 mm, padang padangų: 100 procentas, Priekinės padangos tipas: pilnos gumos padangos (juodos), priekinės padangos dydis: 23X10-12, galinės padangos tipas: pilnos gumos padangos (juodos), galinės padangos dydis: 355X65-15, bendras svoris: 9 800 kg, tuščias svoris: 6 800 kg, bendras aukštis: 2 550 mm, bendras ilgis: 2 100 mm, bendras plotis: 2 300 mm, spalva: geltonas, Įranga: CE žymėjimas, kabina, padėklų šakės, visų varančiųjų ratų pavara, šoninis poslinkis, 🔶 COMBILIFT C3000XL – 2011 – 5672 MTH – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for immediate operation. Zero compromise. Kledpfx Acey S El Astst This COMBILIFT C3000XL is more than just a machine—it’s a guarantee of smooth, reliable, and interruption-free logistics. Designed for demanding conditions and fully serviced, both technically and cosmetically, this forklift is presented in as-new condition and available for immediate deployment. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG (gas) 💪 Lifting capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Superelastic (100%) 🛠️ Technical condition: 5/5 – fully overhauled, ready to work 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Total height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Ideal applications: 📚 Narrow-aisle warehouses 🪵 Steel, timber and pipe industries 📏 Long load handling 🏭 Indoor and outdoor use FT LOGISTICS – Quality you can rely on. Service you can trust.