M-Tec Mathis Technik Ms-150 pirkti naudotą (83 187)

Būklė: naudotas, Dujų maišytuvas / buferinė stotis, Witt-Gasetechnik MG50-2ME Pv-Dü, naudota mašina Gamintojas: Witt-Gasetechnik Tipas: MG50-2ME Pv-Dü Pagaminimo metai: 2017 Cgsdpeyz Tlcsfx Af Ajt Techninės specifikacijos: Dujų tipas: CO2 / oras Darbinis slėgis: 8 bar Talinio indo talpa: 100 litrų Maks. indo slėgis: 10 bar Elektros duomenys: 230V, 50 Hz Matmenys: Plotis: 1000 mm Gylis: 660 mm Aukštis: 920 mm Tikslus maišymas: Didelio tikslumo CO2 ir oro maišymas pagal „Pv-Dü“ (proporcinio vožtuvo-antgalio) principą. Integruotas buferis: Įrengta 100 litrų slėginė talpa stabiliai dujų tėkmei užtikrinti. Pritaikymas: Puikiai tinka maisto produktų saugojimui, žemės ūkio šiltnamių CO2 praturtinimui ar pramoniniam laboratoriniam naudojimui.

Būklė: geras (naudotas), Gamybos metai: 2018, The AMBITOWER 10 series filter ventilation unit (filtration tower) is designed for extracting welding fumes in production halls. These efficient, compact hall ventilation systems are used wherever selective smoke detection alone is insufficient or direct capture during welding operations on large or complex metal components is unfeasible. Filtration towers not only provide effective pollutant separation but also contribute to significant savings in hall heating costs during winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by high-performance, stationary M-class filter cartridges that guarantee 99% separation efficiency, allowing warm, purified air to be recirculated into the hall without the need for fresh outside air supply. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems: Csdpfx Aei Atb Tof Asgt - Extraction of welding fumes in production halls (hall ventilation systems) - Ideal for all work areas where local extraction is impractical or impossible - Metal industry - Mechanical engineering - Automotive industry - Vehicle construction - Aircraft manufacturing, etc. Technical parameters: - Motor power: 7.5 kW - Integrated frequency inverter - Airflow capacity: 10,000 m³/h - Filtration surface area: 90 m² - Antistatic filter cartridges - Noise level: ≤ 75 dB - Year of manufacture: 2018 - Complete technical documentation included Dimensions: - Width: 2.35 m x 1.35 m - Height: 3.50 m - Weight: 1,800 kg

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, aušinimo tipas: oras, bendras svoris: 120 kg, nuskaitymo srities ilgis: 150 mm, nuskaitymo srities plotis: 150 mm, reikalingas plotis: 1 550 mm, reikalingas aukštis: 2 050 mm, lazerio bangos ilgis: 1 064 nm, įėjimo dažnis: 50 Hz, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is designed for a very broad range of marking applications. Equipped with the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be fitted with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser is indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos easily and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. It can also import data (such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also supported. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long components, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30W, 20W, or 50 Watt • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (other sizes optional) • Signal indicator to display operational status • Optional: rotary axis (3-jaw chuck) • Optional: extraction unit (incl. activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic focal distance determination • Optional: extension arms for large components (single-sided or double-sided) • Marking software EZCAD in German/English • Pilot laser (simple preview, plaintext preview) • Focus finder (easy focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profiles • Air-cooled • Door width approx. 700mm / Door height (pass-through): approx. 400mm Cedpfx Aexd Az Nef Aogt • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder approx. 1500 x 800 x 1900mm (LxWxH) • Weight: approx. 120 kg

Būklė: naujas, Gamybos metai: 2026, Modelis: Mechaninė arba VNC su lietimui jautriu ekranu Diskinis pjūklas su stelitiniu arba lenktu dantuku Galandimas per vieną eigą su daug vandens! Dantų profiliai: Visi įprasti dantų profiliai Disko skersmuo: diskiniai pjūklai iki 1000 mm Disko storis: 0,6 - 6,0 mm Dantų žingsnis: 0 - 60 mm Dantų aukštis: 0 - 25 mm Sulyginimo kampas: 0 - 40° Cgodpfxoyz St Sj Af Ast

Būklė: naujas, Gamybos metai: 2026, Model: Mechanical with touch panel Tooth profiles: All tooth profiles Blade width: Band saws up to 350 mm (double-toothed and variable) Teeth: 0–60 teeth per inch (TPI) Cooling: 150–300 L/min Blade thickness: 0.6–6.0 mm Tooth pitch: 0–60 mm Tooth height: 0–30 mm Codpfx Asyz Supef Ajgt Rake angle: 0–40°

Būklė: naujas, Gamybos metai: 2026, Model: Mechanical with touch panel Cgodpfx Afjyz Srbe Aet Tooth profiles: All standard profiles Blade width: Bandsaws up to 230 mm Blade thickness: 0.6 - 6.0 mm Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Rake angle: 0 - 40°

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 2026, Model: Wet sharpening machine Mechanical with touch panel Tooth profiles: All common tooth profiles Blade width: Frame saws up to 230 mm Blade thickness: 0.6 - 6.0 mm Cgjdpfx Aeyz Srnef Aet Tooth pitch: 0 - 60 mm Tooth height: 0 - 25 mm Rake angle: 0 - 40°

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 500 mm, matavimo diapazonas Z ašis: 300 mm, Įranga: apšvietimas, dokumentacija / vadovas, AIM coordinate measuring centers are the technological successors to the globally used Mahr multisensor coordinate measuring machines. Technical data: Measuring range: 500 x 500 x 300 mm Dimensions: 1520 x 1040 x 2040 mm Weight: approx. 1,200 kg Max. workpiece weight (on glass plate): approx. 40 kg Accuracies: U1=1.9 + L/200 U2=2.4 + L/150 U3=2.9 + L/100 (L = measuring length in mm) Higher precision upon request Traversing speed: 200 mm/s Acceleration: 400 mm/s Scale resolution: 0.0001 mm Multisensor sensor unit (MSH): optical / tactile / laser Including: Cgedjg Ewk Ropfx Af Ast - High-precision USB camera with 2-stage zoom and telecentric beam path - PTL01 TTL point laser, high-precision, telecentrically coupled - Renishaw TP200 integrated tactile probing system, optionally expandable - Quad-Light LED power ring light, programmable incident light - LED power transmitted light - Nikon precision objective 5x (optional: 3x, 10x, 20x, 50x) C-Mount technology - Calibration standard with factory calibration certificate, consisting of glass plate "circle", calibration sphere, and gauge ring - State-of-the-art PT200 CNC control system in a robust, industrial-grade control cabinet - PCI-BUS system for fast internal data transfer in real-time operation - Pull-out 19" controller rack for optimum service access - Modular controller concept open for future upgrades and retrofits - Service-optimized controller design for quick access and reduced service times - Integrated 64-bit broadband bus technology with real-time data transfer - 4-channel online temperature compensation (prewired, on board) - Active safety technology for drives, light management, and sensor systems - Online remote connection for remote maintenance and online system check - LS circuit breakers for fast troubleshooting during service - Firmware adaptation for volumetric 3D full error compensation Including powerful OptiCheck3D 5.0 software. Commissioning, training, and start-up support (programming) can be booked as an additional package!

Būklė: naudotas, Dimensions: 800 x 750 x 1975 mm Cedpob Tffgofx Af Aegt Washing chamber: 500 x 650 x 625 mm

Gamybos metai: 2012, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9332067, RIEDANTIS TRANSPORTERIS - KONSTRUKCINĖ SMĖLIAVIMO ĮRANGA GAMINTOJAS: RUMP TIPAS: 20-W 1500-4 Cedpjy Entiefx Af Aegt Gamintojas: Rump Tipas: 20W-1500-4 Pagaminimo metai: 2012 Išmatavimus ir darbo valandas rasite techniniame brėžinyje. Komplekte yra filtravimo sistema, garso izoliacija, elektros skydinė, pilna dokumentacija ir kt. PUIKIOS BŪKLĖS Tai veikiantis, naudotas įrenginys. Parduodama be garantijos ir be jokių įsipareigojimų. Pasiliekama teisė į tarpinius pardavimus ir galimas klaidas.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, aušinimo tipas: oras, lazerio bangos ilgis: 1 064 nm, The LAS 28 XLe universal laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial setup. Furthermore, the software is capable of reading data (such as drawing numbers, project names, etc.) from existing tables and automatically transferring them into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30 Watt, 20 Watt or 50 Watt • Laser class 1 • Wavelength: 1064nm • Marking field size: 150x150 mm (optionally larger) • Signal lamp for operational status indication • Optional: rotary axis (3-jaw chuck) • Optional: fume extraction (including activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic determination of focal distance • Marking software EZCAD in German / English (other software upon request) • Pilot laser (easy preview, plain text preview) • Focus finder (easy focus adjustment) • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and keyboard tray, height adjustable • Aluminum profile frame Cgjdpfx Ajwlc Stef Aot • Air cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH); with monitor arm approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For durable markings, the use of lasers has become indispensable in many industries. The powerful laser software allows text, numbers, 2D codes, QR codes, and logos to be created easily and with just a few clicks, without advanced programming skills. Serial and article numbers can be incremented automatically after configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. Use of a handheld scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Other options, such as side extensions for long parts, movable Z-axis, drawer systems, etc., are also available. Furthermore, programmable, software-controlled axes (X, Y, Z axes) and database connectivity are possible. Cgodswkpvvopfx Af Aot Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software: EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic determination of focal distance • Optional: programmable X, Y, and Z axis (software controlled) • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Signal light for operating status indication • Max. workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made from aluminum profile • Air-cooled • Door width: approx. 700 mm / door pass-through height: 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Būklė: naudotas, Gamybos metai: 1994, Mechaninis rūšiavimo ir transportavimo blokas Cgsdswtnl Ujpfx Af Ast

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, galia: 30 kW (40,79 AG), filtravimo plotas: 121,3 m², Abs. įrenginys Gamintojas: Höcker Polytechnik Modelis: MultiStar JP5 Metai: 2012 Tūris: 20 000 m³ Variklis: 30 kW Su briketavimo presa BrikStar c-3 18 Vakuumas Filtro plotas: 121,3 m² Filtravimo maišeliai: 100 vnt. Maišelio ilgis: 2300 mm Maišelio skersmuo: 170 mm (išorinis slėgis) Suslėgto oro jungtis: 6,0 bar, 1" Darbinis slėgis: 4,5 bar Suslėgto oro suvartojimas: apie 216 Nl kiekvienai maišelių eilei Pagrindo matmenys: ilgis x plotis: 2540 x 2420 mm Užimamas plotas: ilgis x plotis: 3500 x 3380 mm Vidinis aukštis: 4430 mm Svoris apie: 1960 kg Cgodpfx Ajy Dukfsf Ast Kanalas, lenktas 90°, 2 mm, 900x800 mm, 1 vnt., varžtais sujungta konstrukcija iš cinkuoto plieno, 2 mm Kanalo matmenys 1: 900 x 800 mm, kanalo matmenys 2: 900 x 650 mm, forma: asimetriška 460406 kanalas 2 mm, 750 mm ilgis, 900x800 mm 2 vnt. varžtais sujungta konstrukcija iš cinkuoto plieno, 2 mm 1 akloji plokštė 2 mm, 900x800 mm 1 vnt. skirta MS xP prie BrikStar 1 vnt. 300x2300 mm prie esamos briketavimo presos Gamintojas: Gross (apie 1100x1100 mm / preso aukštis: 1260 mm)

Būklė: naujas, Gamybos metai: 2026, * Optional features available at extra cost; see below * Approximate production time: +/- 6 months The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, ensuring consistent briquette quality in continuous operation. The compaction process operates without the addition of binding agents—only hydraulic pressing force is applied. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers for installation beneath existing extraction and filtration systems, as part of a complete disposal unit, are also available. Depending on customer requirements, individual MPP NEM machines can be combined into a system. The chip container of the press can be loaded manually, via conveyor belt, by means of an extractor or using a tilting container trolley. For systems requiring fully automatic operation, the use of a lifting and tipping device in combination with a shredder is recommended. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 80 mm, and the diameter is 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a catch pan. In this way, coolants, cutting fluids, and lubricants can be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage bin of the briquetting press. An agitator installed at the bottom of the bin prevents bridging and feeds the material into the pre-compaction chamber. In this chamber, a hydraulic slide compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slide until the set pressing pressure is reached. Afterwards, the vertical cylinder moves up and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Advantages of the briquetting process: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Efficient disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to 350 kg/h maximum (material-dependent; chip length less than 10 mm) Cgodpjgfm Ryofx Af Ast During the last test with aluminium chips less than 18 mm – approx. 260 kg/h *Further details available after a free test with your material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical Data: Total power requirement: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Includes agitator Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (LxWxH) Weight: 2250 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Gamybos metai: 2006, būklė: naudotas, Svoris be apkrovos: 2.000 kg Matmenys (I x P x A): 210 x 240 x 210 cm - Pagaminimo metai: 2006 - Dokumentacija prieinama: Ne - CE sertifikatas yra: Ne - Transportavimo matmenys: 2100 mm x 2400 mm x 2100 mm (i x p x a) - Transportavimo svoris [kg]: 2000 kg - Transportavimo paketų [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM Cgsdpfxjwh I Edj Af Ajt PVM/ar diferencijuotas apmokestinimas: PVM gali būti atskaičiuotas juridiniams asmenims Pristatymas ir priėmimas mainais galimi bet kuriuo metu visai pramonės įrangai. Yorick Diebels

Gamybos metai: 2024, būklė: paruoštas naudoti (naudotas), The heat exchangers are part of the system and were only commissioned separately. The new price of the plant was thus over EUR 2 million. The official commissioning took place in April 2024; however, this only involved trial operation and not continuous production. Technical Data – Modular Chamber Furnace System for the Homogenization of Aluminum Billets (Used System) Machine Type: Modular chamber furnace system with heat recovery Intended Use: Homogenizing (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, loading machine, racks System Configuration The system essentially consists of: • 1 Preheating furnace (BSN 1607) – electrically heated, jet heating • 2 Holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 Heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 Loading machine (BSN 1612) – electric/hydraulic • 12 Charging racks (BSN 1614) • Switchgear with PLC control (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is constructed as a complete machine according to the Machinery Directive 2006/42/EC (CE compliant). Cjdpfx Afeyt Ihbo Aegt Further information can be found in the attached PDF.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil collection mats. Does not include a packaging table—only briquette guides (rails) are provided. Comes standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. Please contact us first regarding this press! Technical Data: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 liters Filters: 4 Cedpfxjtmugcj Af Aogt Length: 2000 mm Width: 2000 mm Height: 2200 mm Weight: 3500 kg Briquette size: 40–110, D80 mm Warranty: 2 years / 2,000 operating hours

Būklė: naujas, Gamybos metai: 2025, Medienos drožlės yra dažnas šalutinis produktas, susidarantis medienos apdirbimo įmonėse gamybos proceso metu. Dėl ribotų realizacijos galimybių medžio drožlės dažniausiai išvežamos į šildymo katilines, kur parduodamos už mažą kainą. Mūsų MM-2000 kūjis malūnas leidžia įmonėms paversti medienos drožles į briketavimui tinkamas pjuvenas susmulkinant ir traiškant jas per metalo sietus, dar vadinamus sieteliais. Greito atidarymo angos užtikrina paprastą ir greitą prieigą prie techninės priežiūros, tuo pačiu išlaikant darbuotojų saugumą. Malūno peiliai nėra tvirtai pritvirtinti ir sukasi laisvai dėl centrifuginio principo. Tai reiškia, kad smūgio metu peiliai mažiau pažeidžiami ir pasižymi ilgesniu tarnavimo laiku. Esant poreikiui, galima užsakyti ir fiksuotus peilius specifinei produkcijai. Malūnas gali būti pritaikytas skirtingiems produktams ir sritims – nuo biomasės atliekų sumažinimo iki prieskonių, cheminių produktų ar mineralų apdirbimo. Perforuoti sietai ir peiliai lengvai keičiami, kad būtų galima prisitaikyti prie įvairių medžiagų ir paskirčių. Csdpfx Afsfh R I Ao Aogt Nemokamas bandymas su jūsų medžiaga – pagal poreikį. Našumas priklauso nuo apdirbamos medžiagos. Išmatavimai: 1765x960x1060 mm. Svoris: 996 kg. Galia: 30/37/45 kW, 50 Hz, 380 V.

Gamybos metai: 2014, būklė: naudotas, Siūlome šį naudotą IFE Aufbereitungstechnik GmbH MPQ 750 viršjuostinį magnetinį separatorių, pagamintą 2014 metais. Cedpfjyxrpnjx Af Ajgt

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 140 kg, bendras ilgis: 900 mm, bendras plotis: 800 mm, bendras aukštis: 2 000 mm, įėjimo dažnis: 50 Hz, lazerio galia: 30 W, lazerio bangos ilgis: 1 064 nm, nuskaitymo srities ilgis: 150 mm, nuskaitymo srities plotis: 150 mm, įvesties srovės tipas: Oro kondicionierius, lazeri tipas: šviesolaidinis lazeris, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent markings, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options such as side extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber Laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) Cgjdjxuvk Eepfx Af Aet • Optional: autofocus system – automatic focus distance detection • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Signal light for system status indication • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Screen and keyboard tray height adjustable • Frame made of aluminum profile • Air cooled • Door width approx. 700mm / Door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno ilgis: 1 064 mm, įėjimo įtampa: 230 V, įvesties srovės tipas: Oro kondicionierius, lazerio galia: 30 W, aušinimo tipas: oras, bendras plotis: 800 mm, bendras aukštis: 2 000 mm, bendras ilgis: 900 mm, bendras svoris: 100 kg, garantijos trukmė: 12 mėnesiai, aukščio reguliavimo tipas: elektrinis, durų angos plotis: 700 mm, durų angos aukštis: 400 mm, nuskaitymo srities ilgis: 150 mm, nuskaitymo srities plotis: 150 mm, įėjimo srovė: 16 A, reikalingas plotis: 800 mm, lazerio bangos ilgis: 1 064 nm, darbinio aukščio: 900 mm, vietos reikalavimas ilgis: 900 mm, lazeri tipas: šviesolaidinis lazeris, Įranga: dūmų ištraukimas, The universally deployable LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser is now essential for permanent marking. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, with no special programming skills necessary. Serial and part numbers can be automatically incremented after configuration. Additionally, the software can read data (such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard features include a laptop with mounting bracket, Windows operating system, and laser software. Optionally, the LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical workpieces. Other options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (larger sizes available optionally) • Marking software EZCAD in German / English • Signal tower for operational status indication • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: extension arms for large components (single-sided, double-sided) • Optional: autofocus system Cgedsywg Sbepfx Af Aet • Pilot laser (easy preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300mm • Electrically adjustable Z-axis • Laptop incl. holder with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (opening): approx. 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 100 kg

Būklė: naudotas, Gamybos metai: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: - Galvanized sheet steel construction - Space-saving due to compact design - Supplied ready for operation - ATEX – Pressure surge resistance tested according to FSA - Low energy consumption with high performance thanks to clean-air side high-performance fan with special impeller - Energy-saving motor, efficiency class IE4 - 4 large-volume collection containers, with insert bags - High safety and long service life due to certified filter media with test certificate - Pneumatic pulse-jet cleaning ("Jet" cleaning) with time-controlled regulation for filter surface regeneration - PLC control unit with display, for 4 EPN 24V DC slide valves, 4 machine start contacts, and 1 external automatic start input (additional slide valve control available at extra charge) Cjdpfx Afjx H Dahj Aegt - Connection cable, 5 m length, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to water supply required) - The extinguishing agent ABC powder is not suitable for fires involving metals or cooking fats and oils - Non-return flap, type-approved - Design according to DIN EN 16770 - Residual dust content in exhaust air below 0.1 mg/m³ - Tested according to GS-HM-03 "H3" - IE5-efficiency powerpack - Start slide valve control: Z 16 - Motor power: 11 kW - Rated air flow (Vnenn): 6927 m³/h at 20 m/s - Max. air flow (Vmax): 8000 m³/h - Negative pressure at Vnenn: approx. 3100 Pa - Negative pressure at Vmax: approx. 2300 Pa - Collection volume: 495 l - Sound pressure level: < 73 dB(A) - Extraction nozzle diameter: 350 mm Dimensions: 3930 x 1030 x 2560 mm Weight: approx. 1080 kg New price over €30,000 Availability: short term Location: 63934 Röllbach

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 10 800 kg, keliamoji galia vienai sandėliavimo sekcijai: 2 790 kg, rėmo aukštis: 3 750 mm, statybos plotis: 1 000 mm, Good day, We hereby offer you, subject to prior sale, a used pallet racking warehouse (multi-bay system) by Galler, type OMEGA. Manufacturer: Galler Lager- u. Regaltechnik GmbH Type: Omega Year of manufacture: unknown Maximum upright load: 10,800 kg Maximum shelf load: 2,790 kg Upright height: 3,750 mm Upright depth: 1,000 mm Beam length (crossbeam length): 3,100 and 3,400 mm Scope of delivery: Codpfx Afsyz A Sxo Ajgt 44 uprights 3,750 x 1,000 x 100 mm (H x D x W) 215 beams 3,100 mm 14 beams 3,400 mm 14 long upright protection elements, 985 x 120 x 55 mm (L x W x H) 10 short upright protection elements, 500 x 120 x 50 mm (L x W x H) 12 floor corner protectors, green, 500 x 120 mm 13 floor corner protectors, yellow, 450 x 110 mm 1 floor corner protector, yellow, 450 x 180 mm 2 double-row upright protectors, plate 300 x 250 mm, upright height 350 mm 24 upright load distributors 1020 x 110 x 45 mm 60 upright bases, as new 21 upright bases, used, good condition 10 mesh shelves for beams, galvanized, 2,900 x 1,020 x 40 mm 19 mesh shelves for beams, galvanized, 2,625 x 1,020 x 40 mm Various smaller mesh shelf sections for beams, galvanized 1 lot of spacer plates for OMEGA upright bases 1 pallet of upright connection profiles, 900 x 30 x 24 mm Note: The above technical data was taken from the operating manual, manufacturer’s brochures or other sources, for which we cannot guarantee the accuracy or completeness. We would be pleased if this pallet racking system is of interest to you. Your service team, Mertens & Frowein GmbH

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 500 kg, Good day, We hereby offer you, without obligation, a used, complete pallet rack warehouse (multi-bay system) from Galler, type OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Type: Omega Year of manufacture: 2021 Bay width: 2,700 mm Shelf load capacity: 1,500 kg Field load capacity: 1,500 kg Brace length: 1,850 mm Frame height: 3,600 mm Max. running length approx. 179 meters Scope of delivery: - 64 uprights, 3600 x 1100 x 100 mm (H x D x W) - 100 beams, 2700 x 100 x 70 mm (L x H x W) - 2 beams, 1850 x 100 x 70 mm (L x H x W) - 16 impact protection elements for a single-row racking line, 1230 x 240 x 400 mm (L x W x H) - 2 impact protection elements for a double-row racking line, 2600 x 240 x 400 mm (L x W x H) - 22 push-through protection mesh elements, 3600 x 1100 x 100 mm (H x D x W) Note: Cgjdpfsyz A Itjx Af Ajt The above technical data have been taken from the manufacturer's manual, brochures, or other sources, for which we cannot guarantee the accuracy or completeness. We would be pleased if this pallet rack warehouse is of interest to you. Your service team Mertens & Frowein GmbH