Hang 150-6 pirkti naudotą (58 529)

Būklė: geras (naudotas), Konvejeris, juostinis konvejeris, transportavimo juosta, juostinis transporteris, plokščias juostinis konvejeris, konvejeris su vakuuminiu prijungimu - Juostinis konvejeris: vakuuminė dalinė zona transportuojamai medžiagai įsiurbti - Juostos plotis: 150 mm - Transportavimo ilgis: 635 mm Redsxrnpbspfx Ahgow - Vairavimo ašis: Ø 30 x 150 mm - Matmenys: žiūrėkite nuotraukas / techninį brėžinį - Matmenys: 530/400/A350 mm - Svoris: 43 kg

Būklė: naudotas, Gear motor, electric motor, geared electric motor - Manufacturer: Cebeha, gear motor type CB SF 150-63 N/40 Rjdpjt E D Eljfx Ahgjw - Speed: 23 rpm - Motor: 0.18 kW / 1360 rpm - Hollow shaft: Ø 20 x 85 mm - Protection class: IP54 - Overall dimensions: 260/250/170 mm - Weight: 12.5 kg

Būklė: geras (naudotas), Sanding drum, return drum, belt sanding machine, belt sander, drum sanding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Manufacturer: KED Kurt Ehemann, sanding drum drum width 640 mm -Drum: Ø 150 mm -Bore: Ø 72 mm -Quantity: 1 drum available -Dimensions: Ø 150 x 640 mm Redpfx Ahsvxp Uvsgsw -Weight: 16.4 kg

Būklė: geras (naudotas), Roller conveyor, roller track, roller path - Roller width: 595 mm Rodpfxodwa Dks Ahgjw - Conveyor length: 1500 mm - Roller diameter: 20 mm - Roller conveyor height: 280 mm - Dimensions: 1500 x 760 x H280 mm - Weight: 44.5 kg

Būklė: geras (naudotas), Traukiamasis cilindras, hidraulinis cilindras, atraminis cilindras, hidraulinis stūmoklis, spaudimo stūmoklis, daugiafunkcis cilindras -Gamintojas: Enerpac, dvigubo veikimo hidraulinis cilindras, spaudimo jėga 9 tonos -Tipas: BRD96 -Eiga: 150 mm -Stūmoklio strypas: Ø 25,4 mm / M22 x 1,5 Redevq Ii Nspfx Ahgjw -Matmenys: 350/63,5/H100 mm -Svoris: 6,8 kg

Būklė: geras (naudotas), Grinding drum, return drum, belt grinding machine, belt sander, drum sanding machine, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers - Manufacturer: KED Kurt Ehemann, grinding drum with drum width 640 mm - Drum: Ø 150 mm - Mounting: Ø 72 mm - Bolt circle: Ø 90 mm M8 Rodpfx Ajvxp T Sshgow - Quantity: 1 drum available - Dimensions: Ø 150 x 640 mm - Weight: 15.2 kg

Būklė: labai geros būklės (naudotas), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat Rodpjlc Uh Eofx Ahgsw -Manufacturer: Danfoss, thermostat temperature switch unused in original packaging -Type: RT 107 17-1566 -Temperature range: 70 to 150 °C -Quantity: 4 thermostats available -Price: per piece -Package dimensions: 280/130/H75 mm -Weight: 1.2 kg/unit

Būklė: geras (naudotas), keltuvas kaušas, hidraulinis krautuvo kaušas, lengvų medžiagų kaušas, verstukas, konteinerių vartymo įrenginys, krautuvo šakės, šakinės, šakės šakių keltuvams -Krautuvo šakės: 2 vnt. / 1 pora Redpfx Ahjpm Thdogjw -Ilgis: 1190 mm -Skerspjūvis: 150 x 65 mm -Įtvirtinimo vieta: 600 mm (žr. brėžinį nuotraukose) -Transportavimo matmenys: 1430/910/H190 mm -Svoris: 280 kg

Gamybos metai: 1984, būklė: naudotas, Screw conveyor, transport screw, auger conveyor, conveying technology, tubular screw conveyor - Design: robust - Drive motor: SEW-Eurodrive 0.3/1.3 kW - Speed: 12/51 rpm - Housing: stainless steel - Conveyor screw: Ø 150 mm - Trough width (internal): 170 mm - Screw: steel/stainless steel, increased torque - Dimensions: see technical drawing in photos Rjdpfjgqlgnox Ahgjw - Transport dimensions: 2960/300/H600 mm - Weight: 154 kg

Būklė: geras (naudotas), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Manufacturer: ROM-Boffalora, double-acting hydraulic cylinder, stroke 150 mm -Type: 65 45M 150 FRA S -Piston rod: Ø 45 mm -Quantity: 2 cylinders available -Price: per piece Rjdpemkm I Ujfx Ahgow -Dimensions: 375/100/H160 mm -Weight: 14.8 kg/pc.

Būklė: geras (naudotas), Quick-release device, quick-release clamp, drilling jig, drill bushings Redpfx Asgw Ilrjhgow - Drilling jig: Used as a quick-release fixture for flat material - Transport box: included - Drill bushings: Ø 12 mm, spacing 100 mm - Dimensions: 1900/150/H60 mm - Transport box: 2040/225/H280 mm - Weight: 70 kg

Būklė: geras (naudotas), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, lightweight alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders - Hydraulic cylinder: Lifting cylinder BVS 536 - Stroke: 150 mm Rodpfxehmc Afe Ahgow - Piston: Ø 100 mm - Dimensions: Ø 150 x 270 mm - Weight: 24 kg

Būklė: geras (naudotas), Short-stroke heavy-duty cylinder, high-pressure hydraulics, compact cylinder, lightweight alloy cylinder, high-pressure cylinder, universal cylinder, hydraulic cylinder, straightening cylinder, hydraulic ram, hydraulic pressure cylinder, lifting cylinder pressure ram - Hydraulic Cylinder: Lifting Cylinder BVS 560 - Stroke: 150 mm - Piston: Ø 65 mm Redehmc Auspfx Ahgjw - Quantity: 10 cylinders available - Price: per piece - Dimensions: Ø 100 x 305 mm - Weight: 9.2 kg/each

Būklė: naudotas, fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom vent cowl, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, louvered flap, non-return flap, louver fan, mushroom vent cowl -Manufacturer: WMW, fan head type MTK DN 150 GL 37081-86 HH -Bolt circle Ø 238 x 22 mm -Quantity: 1x cowl available -Price: per piece -Dimensions (overall): 500/285/H455 mm -Weight: 35 kg/pc. Redpfjirf Hdjx Ahgsw

Būklė: naudotas, Sealing insert, gasket -Manufacturer: DOYMA, Curaflex sealing insert type A, unused, original packaging -Type: A DPS DN 150, for 86.0 - 94.0 GGV / EPDM Item no.: 101009015000 -Nominal diameter: DN 150 for 86 - 94 mm -Quantity: 1 insert available -Dimensions: Ø 150 x 44 mm -Weight: 1.3 kg Rodpfst Rbifjx Ahgjw

Būklė: geras (naudotas), Gamybos metai: 1985, Radial fan, dust extraction blower, fan, extraction unit, dust blower - Motor power: 0.4 kW Rjdpfocii N Sox Ahgjw - Speed: 1276 rpm - Total pressure: 260 Pa - Air flow rate: 3200 m³/h - Inlet connection: Ø 400 mm - Outlet connection: 360/470 mm - Dimensions: 1130/560/H780 mm - Weight: 106 kg

Būklė: labai geros būklės (naudotas), rida: 256 305 km, galia: 110 kW (149,56 AG), pirmoji registracija: 09/2013, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: raudona, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas, Gamybos metai: 2013, Įranga: ABS, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, oro kondicionavimas,

Būklė: labai geros būklės (naudotas), rida: 256 392 km, galia: 110 kW (149,56 AG), pirmoji registracija: 09/2013, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, kuras: dyzelinas, spalva: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2013, Įranga: ABS, centrinis užraktas, elektrinis langų reguliavimas, kruizo kontrolė, oro pagalvė,

Gamybos metai: 1999, būklė: naudotas, 1 used main spindle drive INDRAMAT Rodsdd Imdopfx Ahgsw RAC 3.5-150-460-L00-W1-220 Siegfried Volz Machine Tools Rueschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives Rodeuxfu Njpfx Ahgow - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable range, fixed stops: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Required floor space: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8,700 kg Redpfx Aswvih Nehgjw Equipped with: - Swivel arm – control panel with ATL 550 controller - For press depth + back gauge - Motorized back gauge - Crowning system - FIESSLER LaserSafe - 4-way universal die, segmented gooseneck punch + hemming tool - Two-hand control panel, foot switch,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 84,58 kW (115,00 AG), bendras svoris: 16 000 kg, Gamybos metai: 1970, Priekabinamas volas 16 000 kg, 6 cilindrai Pagaminimo metai: 1970 Redpfxoxwvpae Ahgow 16 000 kg 115 AG Deutz variklis, 6 cilindrai

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 43 h, mašinos/transporto priemonės numeris: H2300010, galia: 4 kW (5,44 AG), slėgis (min.): 10 juosta, Naudota mašina: Stūmoklinis kompresorius iš karto prieinamas (Plug and Play): Rodoxc Hzkjpfx Ahgjw ALMIG HLA 06-10-150 (10 bar) su horizontaliu 150 litrų suslėgto oro rezervuaru Kompresorius turi 43 darbo valandas ir yra iš karto prieinamas. 3 cilindrai Slėgis: 10 bar Nominali galia: 4,0 kW Našumas prie 7 bar: 450 l/min Suslėgto oro išėjimas: 1/2" Išmatavimai (plotis x gylis x aukštis): 136 x 51 x 107 cm Svoris: 169 kg Aplankykite mūsų parduotuvę. Visada turime didelį naujų ir naudotų kompresorių asortimentą sandėlyje! Iš karto prieinama.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, For sale is a new ABB IRB 6700-150/3.20 >>ORIGINAL PACKAGING, YEAR OF MANUFACTURE: 2025 Manipulator: - 435-114 Version: IRB 6700-150/3.20 - 209-202 Manipulator color: ABB Graphite White standard - 287-4 Design: Standard configuration - 334-1 ABB Logo on manipulator: With ABB logo - 1999-1 Standard calibration method: Axis calibration Base: - 700-3 Controller versions IRC5: Single Cabinet Controller (single cabinet design) IRC5 - 129-1 Electromagnetic compatibility (EMC): Prepared for CE marking - 769-2 Supply voltage: Supply voltage 400V - 752-2 Mains connection: Mains connection via HAN HSB plug 6p+E - 742-1 Main switch: Rotary main switch - 708-1 Control cabinet ambient temperature: Control cabinet suitable for ambient temperatures up to max. 45°C - 741-1 Connector field cover: Connector field cover for one field - 438-1 Warranty period: Warranty period after delivery 18 months (partner) / 12 months (end customer) Floor Cables: - 210-2 Manipulator cable: 7 m manipulator cable - 16-1 Customer signal interface: Customer signal interface connected to control cabinet - 94-1 Customer signal cable: 7m customer signal cable - 859-1 Customer signal cable, ProfiNet: 7m customer signal cable, ProfiNet Control Unit: - 701-1 FlexPendant: FlexPendant with 10m connection cable - 888-2 Profinet I/O: ProfiNet I/O Master/Slave software - 941-1 Ethernet switch: Ethernet switch - 1541-1 Base Digital 16In/16Out: Base digital IO module 16 in / 16 out - 1550-1 Conveyor Tracking unit int.: Internal conveyor tracking unit 1 - 727-1 Power supply 24V: Power supply 24V, 8A - 731-1 Safety signals: Internal safety signals - 996-1 Safety module: Safety module - 997-1 Safety network: PROFIsafe F-device - 1125-2 Safety Robot Supervision: SafeMove Pro - 733-1 Operator's panel: Operator panel on the control cabinet - 735-2 Mode selector switch: Mode selector switch with 2 positions for drive units - 736-1 Service socket: 230V service socket ROBOTWARE: - 685-2 Robotware version: Operating system RobotWare 6 - 606-1 Conveyor Tracking: Conveyor tracking software extension - 608-1 World Zones: World Zones software extension - 611-1 Path Recovery: Path Recovery software extension - 613-1 Collision Detection: Collision Detection software extension - 623-1 Multitasking: Multitasking software extension Rsdpfx Ajyr R Egshgjw Process: - 455-8 Application signals: Parallel and Ethernet - 778-1 DressPack process configuration: For material handling - 798-3 DressPack version: Base to axis 3 - 458-1 Mating connector set for user signals at axes 1 to 3 incl. BUS (CP/CS/BUS): Mating connector set for user signals at axis 3 incl. BUS (CP/CS/BUS) GENERAL: - 448-2 Delivery project: Expanded Offer

Būklė: beveik kaip naujas (parodų įrenginys), PRICE ON REQUEST! - As new condition - Fully measured - Gear backlash: Axis 4 - 0.01 WM Axis 5 - 0.015 WM Axis 6 - 0.01 WM - Central hand newly calibrated - Endurance test: 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand in exchange (without exchange on request) - Gearbox overhaul for axes 1-6 - 12 months warranty 18 months available at extra cost IMMEDIATE AVAILABILITY: Over 100 central hands in stock, various models. Just ask! Rjdpsg A Iucjfx Ahgsw Express overhaul of your KUKA central hand also possible – turnaround 48-72 hours after receipt. Additionally, we offer repair of ABB wrists.