Doll T2P-S3Fs21 Next pirkti naudotą (1 047)

Būklė: naudotas, rida: 201 218 km, galia: 375 kW (509,86 AG), pirmoji registracija: 08/2023, kuro tipas: dyzelinas, bendras svoris: 33 000 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 10/2026, stabdžiai: retarderis, spalva: juodas, pavaros tipas: automatinis, Gamybos metai: 2023, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), kranas, navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: naudotas, Gamybos metai: 2019, veikimo valandos: 1 600 h, Įranga: suodžių filtras,

Būklė: naudotas, rida: 208 669 km, galia: 235 kW (319,51 AG), pirmoji registracija: 12/2014, kuro tipas: dyzelinas, sėdimų vietų skaičius: 57, pavaros tipas: automatinis, kita apžiūra (TÜV): 04/2027, emisijos klasė: Euro 6, spalva: geltonas, Įranga: ABS, elektroninė stabilumo programa (ESP), oro kondicionavimas, suodžių filtras,

Būklė: labai geros būklės (naudotas), Catalogue number: 7983 TECHNICAL DATA Equipment: - Disc - Pre-milling cutter - Tape feeder - Guillotine - Glue tank (granulate) - 4 pressure rollers (1 rubber, 3 metal) - End cutting unit with saw blades for front/rear - 2 edge milling units for top/bottom with radius cutters - 2 scrapers to remove excess glue, radiused top/bottom Giodpfx Ajy Id Nljp Iou - Corner rounding unit - Straight scraper top/bottom - 2 polishers - Max feed speed: 10 m/min - Min length of workpiece: 260 mm - Min width of workpiece: 90 mm - Workpiece thickness: 10–60 mm - Edge banding tape thickness: 0.5–3 mm - Retractable workpiece support from the table - Total power: 12.3 kW - Extraction connection diameter: 140 mm - Dimensions (LxWxH): 5000 x 1520 x 1600 mm - Weight: 1295 kg ADVANTAGES – Unpainted – Pre-milling, corner rounding – Operation panel with quick selection of preset work programmes – German-made – Full technical documentation (DTR) – Machine after servicing (last maintenance: 17/10/2025, next due: 17/10/2026) – Very good condition – Used edge bander Net price: PLN 38,900 Net price: EUR 9,260 (at an exchange rate of EUR 4.2) (Prices may vary depending on significant exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, POLY-CLIP FCA 3430 | Automatic Clipping Machine Manufacturer: Poly-clip System GmbH & Co. KG Model / Type: FCA 3430 Serial Number: 859 Year of Manufacture: 2011 Power Supply: 400 V / 50/60 Hz / 3-phase Rated Current: 4 A Power: 2.8 kW Dimensions: 1600 x 1250 x 2000 mm Machine Weight: 595 kg Caliber Range: approx. 24 - 60 mm Maximum Cycle Rate: up to 200 cycles/minute The Poly-clip FCA 3430 automatic clipping machine is a high-performance device that represents the absolute standard in the meat, sausage, and ready meal processing sector. This machine is designed for automatic sealing of casings—both natural and artificial (collagen, protein, cellulose, and plastic)—using aluminum clips. It finds key application in medium and large-scale meat processing plants for serial production of sausages, frankfurters, kabanos, pâtés, salamis, and dense food masses packed in sleeves (e.g. processed cheese, lard, offal). The FCA 3430 model is distinguished by its exceptional operational precision. When synchronized with a vacuum filler (e.g., Handtmann, Vemag), the machine automatically receives the filling, forms a portion of predetermined length or weight, precisely closes two clips simultaneously (sealing the end of one product and the beginning of the next), and—if required by the process—cuts the finished product with an integrated pneumatic knife. The machine operates seamlessly with a loop-string feeding system, allowing for the automatic preparation of sausages ready for hanging on smoking sticks. Giodpfx Aey Um E Aep Isu

Būklė: naudotas, rida: 479 170 km, galia: 302 kW (410,61 AG), pirmoji registracija: 02/2017, kuro tipas: dyzelinas, bendras svoris: 19 000 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 01/2026, stabdžiai: retarderis, spalva: raudona, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras plotis: 2 550 mm, bendras aukštis: 4 000 mm, krovinio erdvės tūris: 48 m³, krovimo vietos ilgis: 6 500 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 3 000 mm, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), oro kondicionavimas, suodžių filtras,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 8 200 h, Funkcionalumas: visiškai funkcionalus, kartojimo tikslumas: 0,3 mm, stalo plotis: 2 200 mm, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 6 000 kg, stalo ilgis: 3 200 mm, frezosios veleno greitis (maks.): 12 000 aps./min, RoboMill 2KR240 S20BT40 TT6t TB16 WM1 – Kompleks odebrany Nowoczesny Kompleks Robotyczny do Obróbki Kamienia „NIE WYMAGA BETONOWEGO FUNDAMENTU” Prezentowany kompleks robotyczny bazuje na robocie KUKA KRC2 z 2012 roku. System może być również dostarczony z: - używanymi robotami KUKA KRC4, - fabrycznie nowymi robotami KUKA KRC4, - najnowszymi robotami KUKA KRC5. Oferujemy również większe konfiguracje robotyczne oparte na platformach KUKA KR360 / KR500, dostępnych zarówno w wersji używanej, jak i nowej. Dostępne są dodatkowe opcje konfiguracyjne: - w pełni automatyczne systemy wymiany wrzeciona i ram pił liniowych, - dodatkowe wrzeciona frezarskie, - ramy pił drutowych o różnych szerokościach, - dodatkowe głowice technologiczne, - stoły obrotowe o udźwigu: - 10 ton, - 20 ton, - 30 ton, - dodatkowe systemy ochronnych ogrodzeń bezpieczeństwa. Przedstawiamy RoboMill – adaptacyjny, wielofunkcyjny system robotyczny przeznaczony do: - frezowania, - wycinania konturów, - cięcia piłą drutową, Godpfxezawm He Ap Ioiu - obróbki płyt kamiennych. Kluczową cechą kompleksu jest jego konstrukcja monobazowa, w której wszystkie główne komponenty zintegrowane są na jednej stalowej platformie. Robot, stół obrotowy, instalacje elektryczne, linie powietrzne i wodne, system chłodzenia wrzeciona, systemy pozycjonowania, magazyn narzędzi oraz mechanizmy pomocnicze są zamontowane w jednej sztywnej strukturze. To rozwiązanie inżynierskie zapewnia kluczowe korzyści: - zachowanie geometrii systemu nawet po transporcie, - eliminację konieczności budowy betonowych fundamentów, - szybkie uruchomienie w nowej lokalizacji, - zachowanie dokładności matematycznej systemu CAM bez konieczności rekalkulacji. Instalacja wymaga jedynie: - ustawienia platformy na powierzchni, - wykonania sześciu otworów pod kotwy, - zamocowania konstrukcji za pomocą kotew chemicznych, - podłączenia zasilania, sprężonego powietrza i wody. Po tych czynnościach system jest gotowy do pracy. - Konfiguracja Standardowa Kompleks wyposażony jest w: - przemysłowego robota KUKA, - automatyczny 16-pozycyjny magazyn narzędzi BT40, - półautomatyczny system wymiany wrzeciona i ramy piłowej, - stół obrotowy o nośności do 6 ton, - platformę do cięcia płyt (3200 × 2200 mm) do pracy z tarczami, - zintegrowany system chłodzenia wrzeciona, - wewnętrzne prowadzenie instalacji elektrycznych, pneumatycznych i wodnych. ____Funkcjonalność Systemu Robotycznego W pamięci robota znajdują się: - programy półautomatycznej wymiany wrzeciona i ramy piłowej, - komplet 16 przestrzennych programów pobierania i odkładania narzędzi, - zewnętrzne modele kinematyczne stołu obrotowego, - programy wspomagające pozycjonowanie i bezpieczne przejścia. Dzięki sztywnej instalacji wszystkich komponentów w monobazowej strukturze, odległości baza–robot–stół oraz moduły technologiczne pozostają niezmienione nawet po przemieszczeniu. Pozwala to zachować pełną poprawność modelu matematycznego CAM, a czas ustawienia i kalibracji po instalacji jest minimalny. ___RoboMill to nie tylko robot. To mobilna platforma przemysłowa do nowoczesnej, zautomatyzowanej obróbki kamienia.

Būklė: naudotas, Gamybos metai: 2000, Technical Details: Maximum wheel diameter: 275 mm Wheel width: 55 mm Maximum module: 6.5 Minimum module: 1.5 Giodjv N Hiljpfx Ap Ieu Face Hobbing – Continuous Process Continuous method: Workpiece and tool (usually Spiron) rotate simultaneously; all teeth are generated in a single operation at once. The cutter head contains several groups of cutters (not arranged in a circle). Teeth of constant height (parallel-height tooth). Conical tooth top surface. Single Indexing Process: The workpiece is stationary and the tool (usually Arcon) rotates and cuts one tooth by plunging into the material. Once a tooth is cut, the tool retracts, the workpiece indexes by one tooth pitch, and the next tooth is cut. This process continues until all teeth are completed. The cutter head has all cutters arranged along a circular path. Conical tooth height. Parallel tooth top surface. The C28 is capable of both wheel and pinion machining. However, for the single indexing process, the C28 must be appropriately configured. This requires a direct measurement system, a part-drive brake for the workpiece axis, and a license file for single indexing operation.

Būklė: naudotas, Gamybos metai: 1988, veikimo valandos: 10 600 h, galia: 66 kW (89,73 AG), kita apžiūra (TÜV): 06/2027, Įranga: kabina, priekinis prikabinimo įtaisas, visų varančiųjų ratų pavara,

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer Gijdpfxsfz Apqe Ap Iju It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. Gijdpfofz Ndyex Ap Ieu We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Gedpfsfzkrnox Ap Ieiu Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution. Giodpfxoflrc So Ap Iju

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Gedpfx Apjfz U Tie Ijiu Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, 7-inch touchscreen panel The large color touchscreen makes parameter entry even easier and more convenient. 5 programs with up to 50 steps each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Gas and oil consumption information Oil and gas consumption is calculated based on burner settings. This function enables you to estimate the consumption and cost of the firing process. USB storage Every firing process is logged and the data can be transferred to a USB stick for evaluation on a PC. Each file is created automatically and corresponds to a single firing process, recording extreme temperatures and exact times. The file is saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this option is free of charge. With other suppliers, this feature can cost several thousand euros. Storage of the last 20 firing processes Something not right? Not enough items came out of the kiln? Now you can check the exact parameters of the firing process, for example, how long it lasted or whether there were any issues. New! Timer It is possible to set the start-up time, so the kiln can automatically switch on before the workday begins. Made by professionals for professionals Gisdpfx Aofzkqmop Ieu Automatic smoke extraction The smoke extraction can be programmed to open a few minutes before the end of the firing process to remove smoke from the chamber. The smoke extractor can be controlled from the touchscreen panel. Process duration timer Using the heating dynamics, the duration of the process is calculated, and the completion time of the firing process is displayed on the screen. Self-closing doors Simply pull the door to open it. To close, just push the door and it will close automatically. Extractor hood above the door (optional) To minimize heat in the hall caused by opening the door, an extractor hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for purchasing a large kiln when you want to use only parts of the kiln. The kiln is equipped with a movable partition and special controls. 2 in 1 (optional) It is possible to use the two chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Gamybos metai: 2020, būklė: naujas, ROMER® specializes in the manufacture of individual technological devices for powder coating systems, as well as complete fully automatic turnkey coating installations. ROMER® provides heating solutions for the aerospace and automotive industries, serving the largest companies in the world. We offer warranty and post-warranty service for equipment sold by us, including a comprehensive range of spare parts. A mesh applied to a poorly prepared surface will peel off or corrode after a short period. Ensuring the best coating essentially relies on proper degreasing—the foundation of any painting process. The coating applied to inadequately degreased parts will detach very quickly. After degreasing, the next step is to roughen the outer layer of the part, which improves paint adhesion (e.g., when bending sheet metal) and also provides protection, such as through a phosphate coating, which in turn extends corrosion resistance. There are many solutions to address these issues. What is the most important factor in a powder coating workshop? You might assume it is the applicator. This is a misconception—even the best applicator cannot help if your oven has poor temperature distribution. If the part overheats in a certain area, the paint will discolor, and if it does not heat properly, the paint will peel off. The most crucial component is the oven. Gisdpjfz A H Dsfx Ap Ieu Oil, gas, or electric oven? Unsure how to power your oven? Which method is more cost-effective? What are the implications? What are the operating costs? We will try to answer your questions. Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For convenient solutions in manual applications, we recommend overhead cross-tracks (lateral transport). - In automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies that manufacture different items simultaneously and, for example, operate several booths with different colors, flexible solutions using non-powered conveyors are utilized. However, this is the most expensive solution.

Būklė: beveik kaip naujas (parodų įrenginys), The Plasma-Jet AirPro Compact 1530 Maxpro is a high-performance plasma cutting system found in the category of plasma cutting machines. This unit delivers excellent cutting quality and, thanks to its compact design, is the ideal solution for workshops with limited space. The machine is particularly economical for single-part and small-series production, as it requires minimal operating costs. Integrated guides and the one-piece construction allow for straightforward commissioning, while the cutting table is prepared for connection to an extraction system. Equipped with the MAXPRO 200 plasma source, the machine achieves a cutting capacity of up to 40 mm and offers optimal CNC performance thanks to EtherCAT technology. Whether you are looking for an effective solution for your cutting projects or a reliable machine for your workshop, the Plasma-Jet AirPro Compact 1530 Maxpro meets your needs. Order now and take your production to the next level! Gjdpfxeyg Dg Te Ap Isiu

Būklė: naudotas, Servomill® UFM 8 V yra išskirtinis konvencinis frezavimo staklių modelis savo kategorijoje. Ši servo-konvencinė universalioji frezavimo staklė apjungia horizontaliąją ašį su pasukamu vertikaliu frezavimo galvute ir siūlo platų apsukų diapazoną, todėl puikiai tinka remonto dirbtuvėms, mokymo bei gamybos skyriams. Integruota elektronika užtikrina precizišką, lengvą ir efektyvų frezavimą. Dėl tvirtos konstrukcijos, patikimų rutulinio sriegio velenų ir galingo 5,5 kW variklio šios staklės pasižymi paprastu valdymu ir dideliu patikimumu. Taip pat įrengti elektroniniai rankenėlės ašių judėjimui ir pozicijų valdymo sistema, užtikrinanti pastovų pjovimo greitį. Užsisakykite Servomill® UFM 8 V jau šiandien ir įsitikinkite šių konvencinių frezavimo staklių kokybe bei privalumais patys. Gedsv Amixepfx Ap Isiu

Būklė: naudotas, rida: 816 000 km, galia: 324 kW (440,52 AG), pirmoji registracija: 09/2009, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, stabdžiai: retarderis, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 5, Gamybos metai: 2009, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), oro kondicionavimas,

Gamybos metai: 2009, būklė: geras (naudotas), platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering - Manufacturer: KTS, heavy-duty transport trolley type DSL with steel tube superstructure - Industrial trailer: with single-axle turntable steering - Unbraked, brake non-functional - Platform: intermediate size 2000/800/H605 mm - Load capacity: max 5000 kg - Tyres: solid rubber - Maximum speed: 6 km/h - Brake - Trailer coupling: for industrial trailer - Quantity: 3 transport trolleys available - Price: per unit - Total dimensions: 3690/1000/H705 mm - Net weight: 460 kg/unit Gijdpfx Apeirf Hho Isu

Gamybos metai: 2024, būklė: labai geros būklės (naudotas), – Galia – 3,5 kW – Valdymas – PLC valdymas Giodpfx Aoyx E Hasp Iju – Vienas nustatymo blokas – Išleidimo stalas – 15 m (galima praplėsti) – Bloko skersmuo – 300 mm – Vielos skersmens diapazonas – 1,8 – 3,2 mm – 1550 N/mm2 – Žiedo skersmuo – 300 – 420 mm – galimi ir kiti žiedų skersmenys – Našumas – 52,5 m2/8h tinklui su sekančiomis charakteristikomis: Žiedo skersmuo 350 mm – 9 ritės Vielos skersmuo – 3 mm Tinklo matmenys – 10 x 5 m – Tinklo matmenys – 10 x 5 m (gali būti ilgesni, priklausomai nuo galutinio tinklo svorio) – Galia – 3,5 kW (visa linija) – Darbuotojų skaičius – 1 per pamainą

Būklė: naudotas, rida: 588 175 km, galia: 300 kW (407,89 AG), pirmoji registracija: 05/2012, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 07/2026, spalva: juodas, pavaros tipas: automatinis, emisijos klasė: Euro 5, Įranga: ABS, oro kondicionavimas,

Būklė: naudotas, rida: 157 500 km, galia: 316 kW (429,64 AG), pirmoji registracija: 01/2022, kuro tipas: dyzelinas, bendras svoris: 26 000 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 01/2027, stabdžiai: retarderis, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras plotis: 2 550 mm, bendras aukštis: 4 000 mm, krovimo vietos ilgis: 7 300 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 2 780 mm, Įranga: ABS, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas,

Būklė: naudotas, didžiausias leistinas svoris: 29 200 kg, bendras svoris: 34 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 09/1997, kita apžiūra (TÜV): 08/2023, Įranga: ABS,

Būklė: naudotas, rida: 409 305 km, galia: 397 kW (539,77 AG), pirmoji registracija: 08/2022, kuro tipas: dyzelinas, bendras svoris: 21 000 kg, ašių konfigūracija: 2 ašys, kita apžiūra (TÜV): 06/2026, stabdžiai: retarderis, spalva: mėlyna, pavaros tipas: automatinis, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas, suodžių filtras,