Daugiapjūklė Obliavimo Staklės Su Plaukiojančiu Disku pirkti naudotą (48 816)

Būklė: labai geros būklės (naudotas), veleno plotis – 810 mm darbinamo elemento maks. storis – 180 mm 4 peilių velenas Ijdpfxjy Ivkhe Alrjth elektrinis stalo kėlimas 2 padavimo greičiai pagrindinis variklis – 7,5 kW

Būklė: naudotas, Weinig brand moulder, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Isdpfxsy S Acxj Alrsth

Būklė: labai geros būklės (naudotas), Išpardavimas iš Šveicarijos likvidacijos, puikios būklės, 510 mm Suva apsauga Itjdpfx Aoy Niwqelrsh

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 1. Wysokowydajna strugarka/profilarka WACO MAXI, 8 głowic 8 wrzecion do podziału poziomego, prędkość podawania 20-150 m/min Szerokość robocza strugania: 30-300 mm Wysokość robocza strugania: 10-150 mm Krąg tnący: 180-260 mm Napięcie zasilania: 400 V, 50 Hz Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW 1. Głowica dolna – 24,5 kW 2. Głowica górna – 30 kW 3. Głowica prawa boczna – 18,5 kW 4. Głowica lewa boczna – 30 kW 5. Głowica prawa boczna – 18,5 kW 6. Głowica lewa boczna – 24,5 kW Podział poziomy: 7. Głowica prawa boczna – 53 kW 8. Głowica lewa boczna – 53 kW Maks. szerokość obróbki: 200 mm Maks. wysokość obróbki: 63 mm Maks. średnica tarczy pilarskiej: 300-400 mm Średnica wrzeciona: 50 mm Regulacja pionowa: 10 mm Obroty wrzeciona: 5 500 obr/min Przyłącze odciągu: 2 x Ø 160 mm Długość jednostki: 1300 mm Itedpfx Alsy S R Agsroh 2. Wysokowydajna strugarka/profilarka WACO MAXI, 3 głowice 3 wrzeciona do wykańczania, prędkość podawania 30-300 m/min Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW Prędkość podawania, regulowana: 30-300 m/min 1. Głowica profilująca: 24,5 kW 2. Głowica górna: 24,5 kW 3. Głowica Rotaplan: 30 kW

Būklė: visiškai atnaujintas (naudotas), Rekonstruotas Weinig U22N modelio obliavimo staklės. 22 cm pločio stalas su grioveliuotu paviršiumi. 8 velenai su tokia sudėtimi: - Apatinis – 4 kW - Dešinysis – 5,5 kW - Kairysis – 5,5 kW Itedpox Syrkofx Alroh - Dešinysis – 7,5 kW - Viršutinis – 7,5 kW - Apatinis – 5,5 kW - Viršutinis – 7,5 kW - Universalus – 5,5 kW Traukimo variklis – 4 kW Keliamo/nuleidimo variklis – 0,85 kW Bendra galia – 53,35 kW Automatinis šoninis padavimas. Labai universali mašina, tinkama tiek ilgoms detalėms (su šoniniu padavėju), tiek trumpoms detalėms (dėl arti esančio traukimo mechanizmo ir grioveliuoto stalo). Puiki techninė būklė. Veleno skersmuo: 400 mm.

Būklė: naudotas, Velenų skaičius: 7 vnt. Darbinis plotis: 260 mm Obliavimo aukštis: 160 mm Isdoxzdwyepfx Alroth Lyginimo stalo ilgis: 2.500 mm Padavimo variklis: 4 kW Padavimo greitis: 30 m/min. Weinig Powermat 500 obliavimo ir frezavimo automatas, skirtas medienos keturpusiam obliavimui ir profiliavimui, su CNC valdymu ir Powerlock greito keitimo sistema. Velenas 1: Apačioje / 7,5 kW / 8.000 aps./min. Velenas 2: Dešinėje / 7,5 kW / 8.000 aps./min. Velenas 3: Kairėje / 7,5 kW / 8.000 aps./min. Velenas 4: Dešinėje / 7,5 kW / 8.000 aps./min. Velenas 5: Viršuje / 7,5 kW / 8.000 aps./min. Velenas 6: Viršuje / 7,5 kW / 8.000 aps./min. Velenas 7: Apačioje / 7,5 kW / 8.000 aps./min. Oro pagalvės stalas: Taip Valdymas: PowerCom Plus

Būklė: labai geros būklės (naudotas), PARDUODAMA: beveik naujas Record Power PT310 obliavimo-storio obliavimo staklės, obliavimo plotis – 310 mm. Mūsų aptarnavimo komanda stakles paruošė darbui, būklė labai gera. Techniniai duomenys: - Spiralinis ašmenų velenas - Obliavimo plotis: 310 mm - Lyginamojo stalo ilgis: 1420 mm - Maks. praleidimo aukštis: 230 mm Itodpfx Aey U Inljlrsh - Nusiurbimo jungtis Ø 100 mm - Variklio galia: 2,2 kW / 3 AG - Įskaitant važiuoklę - Pagaminimo metai: 2025 – kaip nauja Staklės yra A-5431 Kuchl ir gali būti apžiūrimos mūsų darbo valandomis. Tarpinis pardavimas galimas! Susiję terminai: lyginimo staklės, storio obliavimas, obliavimo staklės, lyginimo, storio obliavimas Nuoroda: R-A0117

Būklė: reikia remonto (naudotas), Gamybos metai: 2010, Funkcionalumas: neveikiantis, X ašies padavimo greitis: 120 m/min, įėjimo dažnis: 50 Hz, For sale is a mechanisation unit from Weinig, consisting of: Weinig 811, Itjdpjv Skaysfx Alroh Weinig 820, Weinig 814, Weinig 811, Weinig 806

Būklė: naudotas, Velenų skaičius: 5 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 120 mm Itodpjy U N Imofx Alrjh Universalus obliavimo ir profiliavimo aparatas Weinig Profimat 23, skirtas keturpusiam medienos obliavimui ir profiliavimui. Įskaitant pjovimo komplektą medienos išilgam pjovimui su 4 ir 5 velenu. 1 velenas: apačioje / 5,5 kW / 40 mm 2 velenas: dešinėje / 5,5 kW / 40 mm 3 velenas: kairėje / bendras variklis su Nr. 2 / 40 mm 4 velenas: viršuje / 7,5 kW / 40 mm 5 velenas: apačioje / 4 kW / 40 mm

Būklė: labai geros būklės (naudotas), 4 kW variklis Iodpfxsyy Stco Alroth 4 peiliai Stalo ilgis: 254 cm Stalo plotis: 52 cm

Gamybos metai: 2007, būklė: naudotas, Control: Siemens 840D Grinding wheel diameter: 900 mm Workpiece grinding width: 144 – 152 mm Workpiece grinding dimension: 22 – 25 mm Rotational speed at 24 m/s: 1,425 rpm Peripheral speed max.: 25 m/sec Ijdpfxoxq Hkuj Alrjth Working power: 37 kW Total power requirement: 75 kW Weight approx.: 18.0 t Space requirement approx.: L 4.9 x W 4.9 x H 2.6 m In our assessment, the machine is in good used condition. Double-Sided Face Grinding Machines The machine was previously used for the production of connecting rods. Accessories, illustrated tools, and clamping devices are only included in delivery if expressly stated in the additional information. Modifications and errors in technical data and specifications as well as prior sale are reserved!

Būklė: naudotas, Gamybos metai: 2006, bendras plotis: 4 600 mm, bendras aukštis: 1 830 mm, Dimensions (L x W x H): 217 x 460 x 183 cm Price: On request - Year of manufacture: 2006 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: 107402 - Number of spindles [pcs]: 4 - └ Spindle 1: - Spindle diameter [mm]: 40 Isdpfxownig Ne Alrjth - └ Spindle 2: - Spindle diameter [mm]: 40 - └ Spindle 3: - Spindle diameter [mm]: 40 - └ Spindle 4: - Spindle diameter [mm]: 40 - Infeed table length [mm]: 1780 - Feed motor [kW]: 5.2 - Feed drive: Cardan drive - Extraction nozzle diameter [mm]: 140 - Voltage [V]: 400 - Transport dimensions: 2170mm x 4600mm x 1830mm (L x W x H) - Number of transport packages: 1 Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in always possible for any items from the industrial sector Yorick Diebels

Būklė: naudotas, Gamybos metai: 2007, bendras plotis: 1 700 mm, bendras aukštis: 11 600 mm, Tuščias svoris: 1.500 kg Matmenys (I x P x A): 380 x 170 x 1160 cm Keturių pusių oblius Weinig Unimat 300 Itsdpfx Alewng Uqsroh 5 ašių staklės Pagaminimo metai: 2007 Min./maks. darbo aukštis: 6/120 mm Min./maks. darbo plotis: 13/230 mm Darbo greitis: 6/12 m/min Veleno apsisukimų dažnis: 6000 aps./min Veleno skersmuo: 40 mm Pagrindinio padavimo stalo ilgis: 2450 mm Varikliai 1-asis velenas - apačia 5,5 kW 2-asis/3-iasis velenas - kairė/dešinė 11 kW 4-asis velenas - viršus 7,5 kW 5-asis velenas - apačia 5,5 kW Matmenys: 4500 x 1300 x 1500 mm (I x P x A), Svoris: 1500 kg - Pagaminimo metai: 2007 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Velenų skaičius [vnt.]: 4 - └ 1-asis velenas: - Įrankis įtrauktas: Taip - Padavimo stalo ilgis [mm]: 2470 - Padavimo volų skersmuo [mm]: 140 - Ištraukimo antgalio skersmuo [mm]: 120 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 67,5 - Saugiklis [A]: 80 - Galia [kW]: 31,8 - Transportavimo matmenys: 3800 x 1700 x 11600 mm (I x P x A) - Transportavimo svoris [kg]: 1500 kg - Transporto paketų kiekis [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/diferencijuotas apmokestinimas: PVM atskaitomas verslui Pristatymas ir atpirkimas galimi bet kuriuo metu visiems pramoniniams įrenginiams Yorick Diebels

Būklė: naudotas, Gamybos metai: 2008, Kaina: pagal užklausą Keturių ašių obliavimo staklės Kuper SWT 23 XL-5R Pagaminimo metai: 2008 Minimali/maksimali darbinė aukštis: 8/150 mm Minimali/maksimali darbinė plotis: 18/230 mm Veleno apsukos: 6000 aps./min Veleno skersmuo: 40 mm Varikliai: Velenas – horizontalus apačioje: 7,5 kW Velenas – vertikalus dešinėje: 7,5 kW Velenas – vertikalus kairėje: 11 kW Velenas – horizontalus viršuje: 11 kW Matmenys: 3100 x 1850 x 1750 mm (I x P x A), Svoris: 4000 kg Išvedimo stalas Weidner kaupimo stalas, tipas DBT 4500B Matmenys: 4500 x 1750 x 97 mm (I x P x A) Prieinama nuo 2024 m. lapkričio - Pagaminimo metai: 2008 - Dokumentacija: nėra - CE sertifikatas: nėra Finansinė informacija PVM: nurodyta kaina be PVM PVM/diferencinė apmokestinimo schema: PVM atskaitomas verslui Pristatymas ir priėmimas į sąskaitą galimas bet kada visoms pramonės sritims Ijdpfownit Ajx Alreth Yorick Diebels

Būklė: naujas, Gamybos metai: 2025, Holzkraft Combined Planer Thicknesser - Immediately available - Ideal for demanding craftsmen and cabinetmakers The especially long, one-piece surfacing tables enable easy straightening of workpieces Work tables are made of cast iron, making them robust and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support for quick and comfortable retooling Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during retooling, saving valuable working time Helically geared steel infeed roller ensures constant and uniform wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood output Material feed with four speeds Thicknessing table adjustment via handwheel with integrated planer height display DIGITAL Version: with electric thicknessing table adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures utmost precision and smooth operation. Prepped for mortising unit Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total table length 2250 mm Max. cutting depth 5 mm Fence length 1200 mm Fence height 150 mm Dust Extraction Connection Extraction port diameter thicknesser 1 x 120 mm Drive Power Main motor 7 kW Installation Info Required space length 2250 mm Required space width/depth 1440 mm Required space explanation: Measurements account for maximum travel range or working lengths. Ijdpfeih Dxdsx Alroth Thicknesser Thickness table length 850 mm Thickness table width 520 mm Min. working height 3 mm Max. working height 240 mm Min. working length 220 mm Max. cutting depth 5 mm Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterblock Type TERSA Diameter 120 mm Number of cutter knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Feed Speed 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, FS 41 Classic Tersa – Surface & Thickness Planer with TERSA Quick-Change Knife System Features: - Equipped with TERSA cutterhead for fast, tool-free knife changes within seconds - TERSA knife system ensures particularly quiet operation - Helically grooved steel infeed roller for consistent and uniform material feed - Extra-long, one-piece surfacing tables allow for easy straightening of workpieces - Large, robust fence remains in position when opening surface tables - Surface tables open to the rear for ergonomic access - High machine weight ensures maximum precision and vibration-free operation - Powerful industrial-grade motor - Heavy-duty steel and cast iron construction Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Surfacing (Jointer) Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min. Cutterhead diameter/knives: 72 mm / 3 pcs. Cutterhead speed: 5200 rpm Motor: 400V/50Hz/S6 40% power cycle, 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg TERSA Cutterhead - No adjustment or screwing required - Knife changes in seconds Iedjcnxayspfx Alroth - Self-locking mechanism - Exceptionally quiet operation Cutter Block - Heavy-duty anti-kickback devices prevent material kickback - Tersa 3-knife cutterhead delivers optimal planing results Material Feed - Helically grooved steel feed rollers for constant and uniform wood feed without marking the material - 13 teeth simultaneously engage the workpiece for powerful feed - Wear-free compared to rubber feed rollers Dust Extraction Connection - Both surfacing and thicknessing extraction ports are aligned in the same direction - Hose connection is accessible from one side only - No hose routing required around the machine

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). Itedpfx Aloqlck Noroh • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Iodpfxoqlckpe Alrsth Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Planer-thicknesser Minimax FS 41es TERSA Maximum equipment for professionals. Article number: 5503431 Brand: Holzkraft / SCM Helical-toothed steel feed roller for consistent and even material feed, allowing planing from as little as 0.2 mm chip removal (at minimum workpiece thickness of 3 mm) – ideal for economical planing of precious hardwoods. Models with TERSA cutterblock enable blade changes within seconds and operate with particularly low noise. Material feed with two speeds. Extra-long planer tables for easy and precise alignment of workpieces. Tables made from cast iron, annealed and stress-free for durability and long-term flatness. Simultaneously opening, rear-hinged jointer tables for short setup times. Thickness table adjustment via handwheel with digital height display. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product): Approx. 2200 mm Width/depth (product): Approx. 1160 mm Height (working): 905 mm Net weight: Approx. 450 kg Jointer Total table length: 2200 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Max. jointer cutting depth: 5 mm Iodslht Htspfx Alroth Dust extraction Thicknessing extraction port diameter: 1 x 120 mm Thicknesser Table length: 775 mm Working height max.: 240 mm Table width: 410 mm Max. thicknessing cutting depth: 5 mm Min. working height: 3 mm Electrical Data Main drive motor power: 5 kW Mains frequency: 50 Hz Operating voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5000 rpm Cutterblock diameter: 95 mm Maximum planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round rod guide & auxiliary fence Two feed speeds TERSA cutterblock Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, Description Technical Data Scope of Delivery Accessories Optional Features Ideal for demanding craftsmen and carpenters The especially long, one-piece surfacing tables facilitate easy planing of workpieces Work tables are made of cast iron, ensuring durability and sustained flatness Simultaneously opening surfacing tables with rear, spring-assisted lifting for quick and convenient conversion Thanks to the fixed extraction hood, there is no need to reconnect the extraction hose during conversion, saving valuable working time Helical steel infeed roller ensures constant and uniform wood feed Rubber outfeed roller at the thicknessing table exit ensures consistent wood extraction Material feed with four speeds Thickness table adjustment via handwheel with integrated planing height display Start/stop switch within operator reach Powerful industrial motor High machine weight ensures maximum precision and smooth operation Prepared for slot mortising attachment Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Surfacer Total table length: 2250 mm Max. cutting depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Extraction port diameter (thicknesser): 1 x 120 mm Drive Power Main motor: 7 kW Isdpfsff Hdmjx Alrjth Installation Information Required length: 2250 mm Required width/depth: 1440 mm Explanation of space requirements: dimensions consider maximum travel paths or usable lengths. Thicknesser Thicknessing table length: 520 mm Thicknessing table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. cutting depth: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Feed speed: 5/8/12/18 m/min

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser machine Holzkraft FS 30 Classic Tersa Equipped with Tersa cutter block and quick-change planer blade system The Tersa planer blade system enables blade changes in seconds and ensures exceptionally quiet operation. Helically-toothed steel feed roller for continuous and consistent wood feed Extra-long planer tables Large planer fence remains in place when opening the planer tables Planer tables open towards the rear Isdsbuldyspfx Alroth High machine weight Powerful industrial motor Robust steel and cast iron construction Total table length: 1510 mm Infeed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. cutting depth: 4 mm Thickness table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa cutter block, anodized planer fence Available ex-stock Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1984, Darbo plotis 600 mm Obliavimo aukštis 200 mm Obliavimo stalo ilgis 2100 mm Obliavimo peilių skaičius 4 vnt. Isdey Db Rxepfx Alreth Padavimo greitis 7 + 14 m/min. Mašinos svoris apie 1100 kg - Aigner pagalbinis atrama obliavimo atramoje - Mašinos rėmas iš ketaus - Storis stalas vedamas 4 kreiptuvais - Reguliuojamas rankiniu ratu - Tilto tipo apsauga Vieta: iš sandėlio 54634 Bitburg - iš karto prieinama -

Būklė: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. Iedpfxopq If Do Alreth - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Iodpfx Alspgkmwjrsth Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Variklio galia: 7,5 AG (5,5 kW) Variklio įtampa: 400 V (50 Hz) Obliavimo plotis: 410 mm Obliavimo velenas: Felder 4 peilių sistema Obliavimo peilių skaičius: 4 Išlyginimo stalo ilgis: 2.200 mm Išlyginimo liniuotė: 1.300 x 170 mm Drožlių nuėmimas: 5 mm Nusiurbimo jungtis: 120 mm Svoris: 510 kg Iodpfeh Hp Hyex Alrsth Išlyginimo apsauga pagal EURO standartą Standartinė komplektacija: • Obliavimo velenas, kurio išlyginimo plotis 410 mm • Tiekiamasis išlyginimo stalas, ilgis 1080 mm • Išlyginimo liniuotė su matuokliu 1300 x 170 mm • Išlyginimo apsauga EURO standartas • Felder 4 peilių sistemos obliavimo velenas Vieta: Sandėlyje, 54634 Bitburg - galima iškart -