Cincinnati Vertikali Frezavimo Mašina pirkti naudotą (45 860)

Būklė: naudotas, Technical details: Drilling diameter: 4-31 mm Dsdpfx Amjwx Shkjyskp Stroke: 350 mm Throat depth: 250 mm

Būklė: naudotas, Gamybos metai: 1970, Tvirtinimas MK 4 Padavimai: taip Mašinos svoris apie 1,5 t Dkjdexzu Dqopfx Amysp

Būklė: naudotas, Gamybos metai: 1994, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Dkodpfjtuxmysx Amyop Corresponding parting surface: 174, 214, 260 cm² Ejector withdraw stroke: 150 mm Used machine: DAW 50 as a basis for a complete overhaul, without control cabinet, furnace, or furnace cabinet. A general overhaul can be carried out at the manufacturer’s refurbishment facility. The scope of the overhaul can be agreed upon on an individual basis.

Būklė: naudotas, Gamybos metai: 1995, Clamping force: 2200 kN Clamping platen: 755x755 mm Tie bar distance: 500x500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Die height: 250-600 mm Tie bar diameter: 85 mm Injection force: 130 kN Injection stroke: 175 mm Injection plunger diameter: 70, 80, 90 mm Injection volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Associated parting surface: 656, 846, 1078 cm² Withdrawal stroke: 230 mm Djdpfx Amsvxlufeyokp Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon agreement. The manufacturer's recommendation is a general overhaul at a certified service center. The scope of the overhaul can be agreed upon.

Būklė: naudotas, Gamybos metai: 1999, Clamping force: 3,150 kN Clamping platen: 900x900 mm Tie bar spacing: 550x550 mm Machine weight approx. 15.5 t Clamping stroke: 500 mm Dodpfx Amovfhrtsyskp Ejector force: 159 kN Ejector stroke: 120 mm Mold height: 300–700 mm Tie bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection piston diameter: 70, 80, 90, 100 mm Casting volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Drop stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system, configured for magnesium alloy processing. Available from stock of used machinery. The machine is equipped with a Rauch electric furnace, model MMO 315E. Spray unit not included. Manufacturer's recommendation: the machine should be repaired or overhauled at the refurbishment facility. Scope of overhaul can be agreed upon as required.

Būklė: naujas, Gamybos metai: 2024, Clamping force: 2200 kN Clamping plate: 755 x 755 mm Distance between tie bars: 500 x 500 mm Dksdpfovvx Hcsx Amyjp Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Mould height: 250–600 mm Tie bar diameter: 85 mm Injection force: 130 kN Injection stroke: 175 mm Injection plunger diameter: 70, 80, 90 mm Injection volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Associated parting surface: 656, 846, 1078 cm² Ejector return stroke: 230 mm Machine equipment features: 1.1.1 Motorized safety door on casting side, right 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector assistance packages 2.1.2 Core pull unit M2 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting assistance packages 3.0.1.2 Casting assistance package Technology 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified injection plunger removal 3.5.2 Electric nozzle and injection chamber heating 3.5.3 Plug-in connections for electric nozzle and injection chamber heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance benefit package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for part removal 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum device 6.1.7 Frech interface for doorman function 6.5.2 Equipment package RSD with switch 7.2.3.3 Spraymotion 811 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.6 Spray bar CR 458

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2005, veikimo valandos: 14 923 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 762 mm, Y ašies eiga: 305 mm, Z ašies eigos atstumas: 534 mm, padavimo ilgis X ašis: 762 mm, padavimo eiga Y ašimi: 305 mm, padavimo ilgis Z ašis: 534 mm, sukimo momentas: 45 Nm, valdiklių gamintojas: Haas, bendras aukštis: 2 700 mm, bendras ilgis: 2 200 mm, bendras plotis: 1 750 mm, stalo plotis: 267 mm, stalo ilgis: 1 213 mm, sukimosi greitis (maks.): 6 000 aps./min, bendras svoris: 1 315 kg, veleno greitis (maks.): 6 000 aps./min, ašies variklio galia: 5 600 W, veleno nosis: CT40/ISO/BT40, ašies skaičius: 1, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Three-axis vertical CNC milling machine Haas TM1 (TM-1) with a 6000 rpm spindle. The machine is offered by Haas-certified technicians with over 10 years of experience. The machining centre has undergone a full, comprehensive service, is refurbished, and ready for immediate operation. The sale is based on a KS agreement, with the option to issue a VAT invoice. A twin machine will soon be available for sale, with the possibility to purchase both units together. Optionally, the milling machine can be sold with installation and accuracy analysis using an advanced Renishaw Ballbar device, which carries out circularity testing with a precision of up to 0.0001 mm/0.1 μm. We provide technical support for the machine as needed! Dedpoyanlaefx Amyjkp We assist with transport and financing! The milling machine is equipped with a range of additional options: - upgraded spindle up to 6000 rpm, - rigid tapping, - work coordinate tracking (rotation & scaling), - M19 spindle orientation, - macro programming, - HSM (High Speed Machining), - intuitive programming system for part programming, - potential activation of the 4th axis with inverter and cabling, available separately (fourth axis), - air blast cooling. Technical data: - Machine type: Three-axis vertical milling machine Haas TM1, - Year of manufacture: 2005, - Spindle speed: 6000 rpm, - X-axis travel: 762 mm, - Y-axis travel: 305 mm, - Z-axis travel: 534 mm, - Table dimensions: 1213 x 267 mm, - Minimum spindle-to-table distance: 102 mm, - Maximum spindle-to-table distance: 636 mm, - Dimensions (W x D x H): 220 x 175 x 270 cm, - Weight: 1315 kg, - 3 T-slots, each 16 mm wide, - Spindle motor power: 5.6 kW, - Maximum spindle torque: 45 Nm, - Spindle taper: CT40/ISO/BT40. The machine has undergone a complete technical inspection. Ball screws, linear guides, lubrication system, spindle, spindle motor, encoder, vector drive, inverters, IO board, processor board, all components in the electrical cabinet, axis drives, tool changer, controller, and more have all been checked. Contact us for further details. We also offer import services on request and pre-purchase inspection for all Haas lathes and milling machines, including VF, VM, DT, DM, Mini Mill, EC, UMC, ST, DS, SL, TL series, and many others.

Būklė: naudotas, Gamybos metai: 1986, x-travel 3300 mm y-travel 2200 mm z-travel 1300 mm w-axis 350 mm Dkedpfx Aoyqt T Remysp Workpiece height 1700 mm Milling spindle diameter 140 mm Quill diameter 230 mm Milling spindle speed range 40–2000 rpm Number of gearbox stages 4 Table surface 4260 x 2000 mm T-slot spacing 175 mm T-slot width 28 mm Number of T-slots 11 Workpiece weight 300,000 kg Milling spindle motor 30 kW Feed rate 5–3000 mm/min Control Fidia Machine weight approx. 80 t Machine has been overhauled The technical data are manufacturer or operator specifications and are therefore non-binding for us. We reserve the right of prior sale; exclusively our terms and conditions of business and sales apply. About us: - More than 400 own machines in stock - Over 15,000 m² storage area, crane capacity 70 t - More than 10,000 items of accessories for your workshop If you would like to sell machines, production lines, or your business, please contact us. You can find more offers on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Būklė: naujas, Gamybos metai: 2022, Vertical Milling and Drilling Machine Bavelloni Series VDM1636. + Additional options: - Pre-setting of drills, dressing, - Barcode scanner, - Additional Camnay Office software package. The VDM 1636 CN is a vertical NC milling and drilling machine designed for the automatic execution of complex drilling and milling cycles. It is equipped with a double drilling head (1 + 1 opposed spindles), each fitted with a rotary tool magazine (8 positions each). This machine, which stands out for its user-friendly operation, has been designed according to the most advanced technical solutions to ensure exceptionally high machining accuracy. The double rotary tool magazine with 8 positions enables drilling, countersinking, and milling at a single workstation. Easy to use, fast and precise in operation thanks to the implemented technological solutions: 5.5 kW spindles, spindle movement on ball guides, latest-generation brushless NC motors, and easy, intuitive software. Possible operations In a single automatic cycle, the VDM 1636 CN can perform the following operations: • Drilling • Conical countersinking • Milling • Cut-outs Djdpfx Aotui R Demyekp Holes can be made at any point on the glass surface. The new control console used in the VDM1636 milling and drilling machine combines all the advantages of numerical control. This interface can operate in a network with other machines. It can also be connected to the BAVELLONI network, enabling remote manufacturer service. The main features of this system are: • Programming while the program controls machine movements, allowing the operator to work easily on the computer. • Simple and direct graphical interface. • Data transfer via market-available tools. The VDM 1636 CN is equipped with one of the most advanced software systems (CAD/CAM) specifically designed for glass processing on numerically controlled machining centers. It is exceptional in performance, reliability, and user-friendliness due to the application of state-of-the-art technical solutions.

Būklė: naudotas, Gamybos metai: 1963, Technical details: Maximum wheel diameter: 900 mm Dkodpfxsvkpu Hj Amyep Maximum module: 10 Machine weight approx.: 8,200 kg Maximum hob diameter: 190 mm Maximum cutter length: 320 mm Cutter speeds (infinitely variable): 13-80 rpm Maximum workpiece length: 750 mm Maximum workpiece diameter: 150 mm LIEBHERR Gear Hobbing Machine L 900 Counter support for cutter arbor missing

Būklė: geras (naudotas), Vertikali presavimoji su 30 t spaudimo jėga Dkjdjycw Dwjpfx Amyep

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2016, X ašies eiga: 6 500 mm, Y ašies eiga: 1 800 mm, Z ašies eigos atstumas: 1 300 mm, padavimo ilgis X ašis: 10 000 mm, padavimo eiga Y ašimi: 10 000 mm, padavimo ilgis Z ašis: 10 000 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, veleno greitis (maks.): 7 000 aps./min, veleno greitis (min.): 20 aps./min, stalo ilgis: 8 000 mm, stalo plotis: 1 100 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2016 Travel / Movements: Longitudinal (X): 6,500 mm Vertical (Y): 1,800 mm Transversal (Z): 1,300 mm Table size: Length: 8,000 mm Width: 1,100 mm Number of T-slots on table surface: 7 units T-slot width: 22 mm Distance between slots: 140 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) ref F-38 (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 43 kW (100% duty cycle) Spindle speed range: Spindle speed max.: 20 - 7,000 rpm Torque: 900 Nm Feeds: X, Y, and Z axes mm/min: 2 – 10,000 Max. Rapid traverse speed: X, Y, and Z axes mm/min: 35,000 Dedpfx Aexvx Amjmyskp Footprint SLP8000: (without enclosure) 13.0 x 4.5 m Overall height: approx. 4.4 m Weight: approx. 34,000 kg Heidenhain TNC 640 HSCI Automatic milling head, diagonal H207 Adapter – angle milling head SK50 with Hirth gearing Automatic tool changer with 60 magazine slots Chip conveyor Preparation / integration for NC rotary table Adaptive Control ACCURA HEADS Coolant system 2 RepairFIT is our proven solution for profitable entry into our product range. The machines available in this line are procured by us following a strict selection process and undergo thorough inspection (Deep-Dive-Check). After extensive cleaning, all identified obvious defects and faults are professionally rectified by our expert service team.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Tilting Spindle Moulder MAKA SF 4510/GRIGGIO with Power Feed Very good condition, the machine comes from a small rural carpentry shop with 3 people. Everything works perfectly. Dksdpfxoy Rh Nzj Amysp All bearings and guides are in excellent condition, the machine runs very smoothly. Comes with a spindle fence, where one fence jaw can be adjusted in depth and offers fine adjustment with a scale, allowing jointing operations such as on a glue profile to be performed. The entire spindle fence can also be adjusted with a screw, enabling very precise settings. Spindle locking via clamping lever. Chips are efficiently extracted – both at the fence and on the machine there are two extraction ports, each 120 mm in diameter. Supplied with 30 mm spindle, steplessly tiltable from -5° to 45°; tilting is done using a handwheel, with a precise degree scale. Clockwise/Counterclockwise rotation. We personally deliver and demonstrate the machine anywhere in Germany for 220.00 Euros, providing a risk-free purchase for you. Delivery to other EU countries is also possible. Large table opening, adjustable with various rings (allowing the use of cutter heads with very large diameters, and safe operation with small cutters). Speeds: 3200, 4200, 6000, and 8000 rpm. Spindle height adjustment also via handwheel with locking screw. Interchangeable spindle (a 40 mm spindle can also be fitted). Optimal power transmission via V-belt drive. Table size: 1070 mm wide and 940 mm deep. Ready for immediate use. 380V, 5500W, with motor protection switch against overload. Year of manufacture: 1999. Weight: approx. 700kg. CE certification. Supplied with manual, motor brake, and emergency stop switch; fulfills all requirements of German woodworking trade association (Holz-BG). Additionally, you receive an HAFFNER 3-roller power feed with 8 speeds. Optimal, simple, quick, and safe operation.

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Cukraus paketėlių pildymo įranga Dkodpfx Aozbh Spjmyop

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0820.0545, Visiškai funkcionalus Dkodpfx Amjyl In Sjyep

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 60 000 kg, ratlankio plotis: 4 300 mm, padavimo ilgis X ašis: 2 200 mm, padavimo eiga Y ašimi: 2 500 mm, padavimo ilgis Z ašis: 1 500 mm, frezos galvos padėtis: 0,02, stalo skersmuo: 3 500 mm, X ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 6 m/min, bendras ilgis: 6 000 mm, ratlankio skersmuo: 4 300 mm, bendras aukštis: 7 000 mm, bendras plotis: 5 000 mm, ruošinio skersmuo (maks.): 4 300 mm, frezos veleno ilgis: 2 500 mm, įvesties srovės tipas: trifazis, frezavimo ilgis: 2 500 mm, veleno greitis (maks.): 2 500 aps./min, veleno greitis (min.): 1 aps./min, Vertikale Dreh- und Fräsmaschine VL 40 CNC Technische Daten des Drehzentrums Nomineller Drehbereich Planscheibendurchmesser: 3.500 mm Bearbeitungsdurchmesser: - maximal: 4.000 mm - minimal: 0 mm Umschlagdurchmesser: 4.000 mm Bearbeitungshöhe: 2.000 mm Werkstückgewicht: 60.000 kg Nominelle Verfahrwege beim Drehen X-Achse (Schlittenquerbalken): - von: -100 mm - bis: 2.250 mm + ATC-Weg Z-Achse (Ram): 1.500 mm Arbeitstisch Tischdurchmesser: 3.500 mm Standard-Planscheibe mit T-Nuten Tischdrehzahl (zur Bearbeitung): 1 – 110 U/min Antriebsleistung (Dauerbetrieb S1/S6): 57/75 kW Drehmoment (Dauerbetrieb S1/S6): 70.000 / 90.000 Nm Hauptantrieb: Getriebereduktor und Riemenantrieb, C-Achsen-Antrieb Arbeitstisch-Fräsgeschwindigkeit: 0,02 – 2 U/min Fräsdrehmoment (Dauerbetrieb S1): 43.000 Nm Tischspannmoment (hydraulische Doppelseitenspanneinrichtungen): 60.000 Nm Z-Achse RAM Dreh- & Fräs-Ram Ram-Querschnitt: 300 x 300 mm Werkzeugaufnahme: - Schaft 32 x 32 / 40 x 40 mm - Automatische Werkzeugspannung Ram-Drehzahl: 0 – 2.500 U/min Leistung (Dauerbetrieb S1): 22 kW Drehmoment (Dauerbetrieb S1): 1.400 Nm Antriebsmechanismus: ZF-Getriebe, zweistufig, Riemenantrieb ZF-Getriebe und Hauptspindellager sind jeweils separat mit Kühlsystemen ausgestattet. Werkzeugaufnahme: BT 50 DIN 69871 / automatische Werkzeugspannung Werkzeugmagazin Anzahl Werkzeugmagazine: - Zwei ATC - Links: 20 Dreh-/Fräs-/Bohrstationen - Rechts: 20 Fräs-/Bohrstationen und Werkstückmesssonde Werkzeugspeicher: 20 + 20 ATC-Drehkapazität: Maximales Einzelwerkzeuggewicht (Drehhalter): 50 kg Maximales Einzelwerkzeuggewicht (Fräsen/Bohren): 25 kg Gesamtwerkzeuggewicht: 600 kg Maximale Werkzeuggröße (Drehen): 250 x 150 mm Max. Werkzeugdurchmesser (Fräsen): 300 mm Max. Werkzeugdurchmesser (Bohren): 120 mm Maximale Werkzeuglänge: 600 mm Dedpey Dfrasfx Amyekp Achsantriebe X- und U-Achse (Ram-Schlitten): - Leistung (S1): 5,5 kW - Druckkraft (S1): 40.000 N Z-Achse (Ram): - Leistung (S1): 5,5 kW - Druckkraft (S1): 40.000 N Weitere Achsantriebe: - Leistung (S1): 11 kW Verfahrgeschwindigkeiten Vorschubgeschwindigkeit X- & Z-Achse: 0,02 bis 6.000 mm/min Eilgang X- & Z-Achse: 10.000 mm/min Kühlsystem Kühlmitteltank: 2.000 l Kühlmitteldruck / Fördermenge: - Innenkühlung (Drehen): 6 bar bei 100 l/min - Innenkühlung (Fräsen), Druckstufen einstellbar: 30 bar bei 60 l/min Filtersystem: Patronenfilter Spänetransporter Transportart: Scharnierband, frontal platziert

Gamybos metai: 1985, būklė: geras (naudotas), Vertikali formavimo staklės Dkjdpjy Hqw Tefx Amyep Maksimalus darbo plotis: 400 mm Veleno skersmuo: 40 mm 3 x pneumatiniai spaustuvai Variklio galia: 7,5 kW Įjungimas kojiniu pedalu Siurbimo vamzdis: Ø 145 mm Staklių matmenys: I 1350 x P 900 x A 1400 mm, apytikslis svoris: 400 kg Puikiai tinka langų kaiščių ar matomų „dėžutinių“ sujungimų gamybai. Įrankiai ant veleno įtraukti

Būklė: naudotas, Gamybos metai: 1980, Frezavimo veleno vidinis kūgis: taip Dsdpfxow N S D Eo Amyjkp Spaudinės skersmuo: taip Sūkiai: 800 aps./min. Sraigtinė frezavimo galva Köpfer 140 + 135 Nr. 4003 Tipas 140

Būklė: geras (naudotas), Wheel diameter – max. 630 mm Wheel width 375 mm Module – max. 10 Clamping table 550 mm Table bore 125 mm Infinitely variable cutter speeds 62 – 390 rpm Taper MORSE 5 Axial feed 0.40 – 6.80 mm/rev Dkjdpfsua It Usx Amyjp Radial feed 0.10 – 1.76 mm/rev Distance from milling spindle to clamping spindle 50 – 425 mm Minimum number of teeth 8 Cutter diameter x width 192 / 215 mm Cutter shift 200 mm Main drive motor 7.5 kW Total power requirement 21 kVa Machine weight approx. 8.2 t Machine equipment: - Universal milling head with tangential adjustment - Pressure reducing valve for counterstay - Magnetic chip conveyor - Year of manufacture approx. 1976

Būklė: geras (naudotas), Gamybos metai: 1984, Maximum wheel diameter: 250 mm Wheel width: 275 mm Module (max): 6 Machine weight approx. 5.5 t The gear hobbing machine ZFWZ 250 is suitable for the efficient production of all hobbed cylindrical gears such as: - Straight and helical spur gears, worm gears and worms, splined shafts, keyway shafts, serrated gears, chain wheels, ratchet wheels, as well as conical and crowned straight and helical gears. Change gears and milling accessories Technical data: - Maximum workpiece diameter: 250 mm - Maximum module: 6 mm - Maximum axial feed travel: 275 mm - Maximum tangential feed travel: 100 mm - Maximum helix angle: 45 degrees - Maximum cutter diameter: 145 mm - Maximum cutter length: 170 mm - Minimum clamping table area: 195 mm - Maximum clamping table area: 470 mm Performance Cutter speeds - Two mechanical ranges: 56 ... 250 rpm - (Standard execution): 90 ... 400 rpm - Infinitely variable in 2 ranges: 63 ... 180 rpm - (Special design DC motor): 140 ... 400 rpm Weight - Net machine: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip conveyor: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to the table) - Width: 3300 mm Dodov T Nqaepfx Amyekp - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Būklė: naudotas, Gamybos metai: 1989, Wheel diameter – max. 400 mm Wheel width: 275 mm Module – max. 6 Machine dimensions: 300 x 310 x 245 cm Machine weight approx. 5.0 t Specification: - Maximum wheel diameter: 400 mm - Minimum module: 1 - Maximum module: 6 - Table diameter: 370 mm - Maximum wheel diameter with counter support: 340 mm / without counter brace: 400 mm - Max. axial offset: 275 mm Dkjdpfeu A I Eljx Amysp - Max. tangential adjustment: 100 mm - Max. helix angle: 45 degrees - Max. cutter diameter: 145 mm - Max. hob length: 170 mm Performance - Cutter speed: 50–200 rpm - Axial feed, stepless adjustment: 0.2–10 mm/rev - Tangential feed, stepless: 0.1–5 mm/rev - Radial feed for spur gears: 0.1–4 mm/rev - Radial feed for worm wheels: 0.025–1 mm/rev - Axial rapid traverse: 500 mm/min - Tangential rapid traverse: 250 mm/min - Radial (spur gears): 400 mm/rev - Radial (worm wheels): 100 mm/rev - Motor power: 7.4 kW Weight - Machine: 5,000 kg - Electrical cabinet approx.: 800 kg - Hydraulic unit, coolant tank, chip conveyor approx.: 700 kg Dimensions - Length with chain drive (standard): 2,950 mm with DC drive: 3,350 mm - Width: 3,100 mm - Machine height: 1,980 mm Electrical cabinet approx.: 2,400 mm Machine with DC drive approx.: 2,150 mm

Būklė: naudotas, Gamybos metai: 1997, mašinos/transporto priemonės numeris: 11968, X ašies eiga: 630 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, bendras svoris: 6 000 kg, Naudota HERMLE universalioji frezavimo staklė, modelis U 630 S, pagaminta 1997 m., su Heidenhain TNC 410 valdymu ir pilnu apsauginiu gaubtu. Dkodpfx Ajygwz Rjmyep X, Y, Z eigų ilgiai: 630 x 500 x 500 mm. Stalo matmenys: 900 x 528 mm, 7 T formos grioveliai (14 mm), veleno kūgis SK40 pagal DIN 69871. Sūkių skaičius: pavaros 1: 20–1.428,6 aps./min, pavaros 2: 1.428,6–7.000 aps./min. Atskiras 120 l aušinimo skysčio rezervuaras, elektrinis Heidenhain HS410 rankinis ratukas, Heidenhain TS 220 matavimo zondas. Su mobiliu įrankių vežimėliu SK40 įrankių laikikliams, įskaitant apie 80 laikiklių. Staklės yra pas mus, adresu 71334 Waiblingen-Beinstein, ir jas galima apžiūrėti iš anksto susitarus telefonu.

Būklė: paruoštas naudoti (naudotas), Travels 300x150x340 mm Djdpfx Amjdr E Apsyokp Universal table 600x260 mm Spindle mount ISO40 Spindle speeds 40–2000 rpm Digital readout Various accessories MARCELS MASCHINEN CH

Būklė: geras (naudotas), Ratų skersmuo - maks. 600 mm Modulis - maks. 6 Matmenys (I x P x A): 2540 x 1500 x 1920 mm Stalo skersmuo: 160 mm Dkedpfsy E Twgex Amyjp Mašinos svoris apie 3,6 t Didelio našumo krumpliaračių frezavimo staklės Dantų pasvirimo kampas 15° Danties plotis: 270 mm Ratų skersmuo: 620 mm Dantų pasvirimo kampas 30° Danties plotis: 250 mm Ratų skersmuo: 610 mm Dantų pasvirimo kampas 45° Danties plotis: 200 mm Ratų skersmuo: 500 mm Dantų pasvirimo kampas 60° Danties plotis: 100 mm Ratų skersmuo: 450 mm Didžiausias frezos skersmuo: 105 mm Didžiausias frezos plotis: 115 mm Prispaudimo stalo skersmuo: 420 mm Prispaudimo stalo skylė: 75 mm Skylių gylis po stalo paviršiumi: — mm Padalijimo ratlankio skersmuo: 450 mm Prispaudimo veleno skersmuo: 30 mm Frezavimo velenėlių skersmenys: 22–27–32 mm

Būklė: naudotas, Gamybos metai: 2007, Ruošinio vardinis skersmuo: 2400 mm Ruošinio skersmuo - maks.: 2800 mm Modulis - maks.: 30 mm Valdymas: Siemens Sinumerik 840 D Padalos rato skersmuo: 2200 mm Stalo skersmuo: 2500 mm Stalo skylės skersmuo / gylis: 800 / 875 mm Maksimali stalo apkrova: 40 000 kg Stalo apsisukimų dažnis: 4,5 min-1 Maksimali tvirtinimo ilgis: 375 mm Maksimalus tvirtinimo skersmuo: 350 mm Didžiausias frezos skersmuo: 2800 mm Frezos laikiklio kūgis: HSK-B160 Frezos galvos posvyrio diapazonas: +30/-45° Atstumas freza-ruošinys: 615 / 1600 mm Staklių svoris apie 57 t Vežimėlio pavaros: - Pasiūlos ir greitosios eigos greitis: - ašiškai: 4000 mm/min - radialiai: 3000 mm/min - tangentiškai: 3000 mm/min Dsdpow Rf S Sjfx Amyokp Įranga/Priedai: - Vidinė frezavimo galva IFK2 - Frezos laikiklis su tarpinėmis - Drožlių transporteriai - Alyvos rūko nutraukėjas - Techninė dokumentacija