Vonios Pasterizatorius Buteliams pirkti naudotą (2 669)

Būklė: naudotas, Gamybos metai: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control on filling lines. The machine was commissioned in May 2012, is in very good condition, and is ready for immediate use. Technical details Capacity: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 product licenses Features: Software assistants for troubleshooting and product changeover Availability: Available for immediate use Missing components Thread blast cleaning (must be added if required) Inspections Monitoring of incoming bottle flow (optional) Emission of a stop signal for bottles with incorrect dimensions Inspection of the bottle base, sealing surface of the mouth, and thread Inspection of the internal and external sidewalls Detection of conductive liquids (e.g., caustic solution) and residual liquids (oils, varnishes) using IR technology Ejection of faulty containers or emission of an ejection signal Scope of delivery Spectrum TX conveyor control Measuring bridges for infeed control and ejection systems, height adjustable 2 x Delta K ejection units Air conditioning unit Various spare parts (discs, belts) Documentation and training materials (German) Transponder for test bottles Iedpju Scr Sefx Aauoia

Būklė: naudotas, Gamybos metai: 1996, Overview  This bottle cleaning machine was manufactured in 1995 by the Swiss producer PAC. The machine is still in operation and can be inspected in person. Technical Details Capacity: 10,000 bottles/h Min/Max: 5,000 bottles/h - 13,000 bottles/h Bottle types: 0.5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle carrier plates: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4.0 - 4.8 m³/h Thermal consumption at 80°C: 700 - 840 kJ/h x 1000 Electrical consumption: 17 kW Including Spare parts Motors for rear and front drive Bottle carrier plates Wear parts Iodpfx Aou H R Nnoausia

Būklė: naudotas, Gamybos metai: 2019, Overview This returnable glass bottling line was installed in 2019 and essentially consists of a bottle washer, rinser/filler/capper block, and a labelling machine with laser printer. The bottling line is available as the previous owner is retiring and closing the brewery. The line was operating flawlessly until recently. The equipment is still installed and connected, and can be inspected in person at any time. Technical details Capacity: max. 1,500 bottles per hour (actual operating speed: 1,000 bph) Filled product: Beer Included formats: 0.33l Longneck, 0.5l NRW Closure type: Crown cap Scope of supply Iedpexgfr Nsfx Aausia - Bottle washer | Manufacturer: SEN | Year: 1989 (refurbished and reinstalled in 2020) - Isobaric filler block | Manufacturer: Shandong Yuesheng | Year: 2019 • Rinser heads: 14 • Filling valves: 12 • Capper heads: 5 • With pre-evacuation system • Counter-pressure filler including 2 formats: 0.33l Longneck and 0.5l NRW - Drying tunnel | Manufacturer: Shandong Yuesheng | Year: 2019 - Labeller including laser printer - Accumulation table

Būklė: naudotas, Gamybos metai: 1999, Overview The bottle washing machine was previously used in a brewery. Thanks to a complete overhaul in 2005 and regular maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. The machine has already been dismantled and is stored dry, allowing for easy loading and transport. Technical Data: - Capacity: 6,700 bph - Cell pitch: 102 mm - Bottles per row: 10 Dimensions & Weights: - Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg - Ready-to-operate with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - Year of manufacture: 1999 - Formats: 0.33 l, 0.5 l Iisdpowg E D Isfx Aauja Machine Details / Features: - Heated by steam - Pre-cleaning and removal of residual liquids by pulsed rinse prior to washing - CE-certified - Chemical dosing pumps - Machine data sheet included - High-pressure pre-rinse - Rotating spray nozzles - One-end machine - Label discharge at rear right - Finger-type bottle infeed/outfeed - Bottle cells made of plastic - Concentration measurement - NaOH storage tank - Spindles in stainless steel - 24V control voltage - Siemens S7 control system - Regularly serviced - Complete machine frame in stainless steel - Steam extraction - Machine dismantled, ready for shipping - Automated machine start (heating, etc.)

Būklė: naudotas, Gamybos metai: 2014, Overview This complete glass bottling line was manufactured between 2010 and 2014 by several renowned European producers, including CIMEC (Italy). The main unit—a CIMEC 16-16-1 rinsing, filling, and capping monoblock—was built in 2014 and operated in a natural mineral water facility until July 2025. The line also includes additional equipment such as self-adhesive and wrap-around labelers, a DE filter, and a heat shrink tunnel for capsules, making it a fully operational and compact bottling system for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on-site. Technical Data Years of manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bottles per hour (330 ml) Approx. 1,670 bottles per hour (500 ml) Bottle formats: 250 ml – 1,000 ml (including: 330 ml & 500 ml) Closure type: 26 mm crown caps Configuration (monoblock): 16 rinsing heads 16 filling heads 1 crowning head Scope of delivery Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown cap, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3,500 bph Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyors DE filter | Spadoni | – | 2011 | 80 hl/h Heat shrink tunnel for capsules | TOSA | TN1 | 2011 | For PVC capsules Isdpfx Aeyb Tkdsausia

Būklė: naudotas, Gamybos metai: 2011, Overview The bottle washing machine was built in 2011 by the German company Krones. It was in use until recently at a major beverage manufacturer and is still installed. Technical Details Iedsu Rindspfx Aaueia Capacity: 20,000 bottles/hour Formats: 0.25l and 0.75l Number of bottles per row: 22 Siemens S7 control Equipment Label discharge Rotary tube spraying Continuous operation Stainless steel housing Documentation Software backup Stainless steel pumps Conductivity measurement Finger handling Spare parts Bottle cell tips Bottle cell carriers

Būklė: naudotas, Gamybos metai: 2000, Overview This bottle washing machine from the German manufacturer Klinger was built in 2000. The washer is constructed entirely of stainless steel, is equipped with Siemens S7 control, double heating units, and surge pumps for high cleaning performance. Technical Data Capacity: 9,600 bottles/h; 20 bottles per row Scope of delivery Bottle washing machine | Klinger | Euroklasse-D 20/1/73 | 2000 Water treatment system | Hager + Elsässer | 2000 including cation and anion exchangers, salt tank, pre-filter, and UV sensor with a capacity of 5 m³/h. The water treatment system was designed for operating both the bottle washer and the RO system RO reverse osmosis system | Hager + Elsässer | 2000 with a total demineralization capacity of 2.5 m³/h Ijdpfx Aotxd A Seausia

Būklė: naudotas, Gamybos metai: 2021, Overview The 4-row glass bottle filling line from Wild Goose was only used for 6 months at a company in Finland. The line is equipped with a rotary table for bottle infeed and outfeed, a bottle washer, a conveyor roller track, an automatic bottle feed for the filling machine, and a labelling machine. Products: Full range of still and carbonated beverages, including beer, seltzer, wine, ready-to-drink cocktails, cider, coffee, tea, kombucha, soda, cannabis beverages, and more Iijdotrh N Tjpfx Aauja Components: - Machine Type: Meheen M4 Filling and Capping Machine Manufacturer: Wild Goose Year of Manufacture: 2021 - Machine Type: Pressure-sensitive label labeller with inkjet for bottles (244) Manufacturer: Koneikko Year of Manufacture: 2021 Technical Specifications - Capacity: up to 1,440 bph - Line length: approx. 10 m when set up as a single line - Bottle diameter: 5.3 cm – 11.4 cm - 230V AC single-phase, 50/60 Hz

Būklė: naudotas, Gamybos metai: 2005, Apžvalga Stiklo depaletizatorių 2005 m. pagamino Vokietijos įmonė KHS, jis iki neseniai buvo Vokietijos pieno perdirbimo įmonės išpilstymo linijos dalis. Depaletizatorius atlaisvinamas, nes savininkas nutraukia gamybą. Techninės detalės / komplektacija Depaletizatorius su kėlimu ir išleidimu apačioje, su tarpinių sluoksnių nuėmėju ir talpykla, su slydimo loviu viršutiniam sluoksniui/dangčiams, uždarais konvejeriais forminėms buteliams viena eilute. Įeina apsauginė tvorelė, padėklų transportavimas, išleidimo stalas. Ijdpfsxb Ai Usx Aaueia

Būklė: naudotas, Gamybos metai: 2007, Overview  The bottling line for returnable glass bottles on offer consists of a selection of high-quality machines chosen by BEVMAQ. Most of the machines were previously in operation at breweries in Germany. The condition of the machines is good, as they have been regularly serviced and maintained. With a few exceptions, the majority was dismantled by a German partner company and is now stored in a warehouse. The layout of the plant can be adapted to the customer’s requirements and factory layout, as the conveyors are either new or refurbished. Technical Data  Capacity: 40,000 bottles/hour with 0.5 l bottles Suitable for: Carbonated water, soft drinks, beer, and beer mixes Recently serviced, maintained regularly Processed formats: 330 ml, 500 ml YOM (Year of manufacture): from 2007 to 2016 The line in detail  Crate Depalletizer | Krones | Pressant Duplex | 2011 Inclusive of safety fences, conveyors, discharge table Packer/Unpacker | Krones | Linapac II | 2012 Machine can be used as a packer and unpacker Bottle Washer | Krones | Lavatec | 2013 Crate Washer | Klotzki | 2011 Empty Bottle Inspector | Miho | David 2 | 2016 Counterpressure Filler + Capper | KHS | Innofill DRS | 2013 Fill Level Inspector | KHS | 2013 Includes bottle rejection system and conveyor Tunnel Pasteurizer | Krones | Linaflex | 2013 Cold Glue Labeller | Krones | Topmodul | 2015 Includes a module prepared for working with seal labels With servo-controlled bottle orientation Packer | Krones | Smartpack | 2011 Palletizer | Transpak | NEW Strapping Machine | Born | - | NEW Mixer | Famix | 30,000 - 2K | 2008 Flash Pasteurizer | GEA | 25,000 | 2007 All pallet, crate, or bottle conveyors are individually adapted to the plant design and built to KHS/Krones standards. Required format parts for bottle, label, crate, and closure handling can be supplied. Iedpjxf D Dbsfx Aauoia

Būklė: naudotas, Gamybos metai: 2014, Apžvalga Gesete XT 500 butelių džiovinimo įrenginys pagamintas 2014 m. ir skirtas butelių džiovinimui prieš etiketavimo mašiną (Etima). Jis pašalina likutinę drėgmę, kad etiketės gerai priliptų. Techninės detalės Gamintojas: Gesete Modelis: XT 500 Pagaminimo metai: 2014 Pritaikymas: Butelių džiovinimas prieš etiketavimą (Etima) Iiodpfxow N Nkpo Aausa

Būklė: naudotas, Gamybos metai: 2022, Overview This complete isobaric filling line for sparkling wine was manufactured in 2022 by the Italian producers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wire-hooding, capsule application, labeling, CIP and filtration. The line is still in operation, has approximately 2,100 operating hours and can be inspected upon request. It will be available at the end of March 2026. Technical Data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bottles/hour Formats and Speeds: 0.187 l: 4,500 bottles/hour (4°C and 15°C) 0.375 l: 4,500 bottles/hour (4°C and 15°C) 0.750 l: 4,000 bottles/hour (4°C) / 2,900 bottles/hour (15°C) 1.500 l: 2,000 bottles/hour (4°C) / 1,500 bottles/hour (15°C) Operating hours: 2,100 Scope of Supply Depalletizer | DUETTI | M Automatic | 2022 | — Rinsing-Filling-Capping Monoblock | GAI | 4033 (16 rinse valves / 24 filling valves / 3×3 capping heads) | 2022 | Isobaric Automatic CIP-System | WIN&TECH | — | 2022 | — Microfiltration units (2 pieces) | WIN&TECH | — | 2022 | — Wire-hooder | ROBINO & GALANDRINO | REKORD 6 | 2022 | — Fill level and closure inspector | CMP | — | 2022 | — Capsule distributor & monoblock | ROBINO & GALANDRINO | ZENITH F 3/18 | 2022 | — Adhesive labeler | MAKRO | 4 stations | 2022 | — Bottle conveyor | — | — | 2022 | Included Iijdpjyb Tf Isfx Aausa

Būklė: naudotas, Gamybos metai: 1999, Apžvalga Ši butelių plovimo mašina pagaminta 1999 m. Italijos įmonėje BODINI (modelis 201-10/66-11V). Įrenginys naudotas limonadų ir sirupų gamybos procesuose, savininko buvo prižiūrimas kas 6 mėnesius. Veiks iki 2026 m. vasario ir gali būti apžiūrimas vietoje. Nustojus gamybai, bus pasiūlytas pardavimui. Techniniai duomenys Našumas: 4500 butelių/val Formatai: 1 l, 75 cl, 33 cl Matmenys: 6,7 m × 2,2 m, konvejeris 0,5 m, aukštis apie 2 m Šildymo sistema: elektrinis šildymo įrenginys, 165 kW Galia: 160 kW su elektrine varža, kitu atveju 10 kW Oro tiekimas: 5 bar Iisdpjyb Titjfx Aauea

Būklė: naudotas, Gamybos metai: 2001, Overview This glass bottle filling line for still and carbonated water was, on average, manufactured in 2001 by several European producers such as TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line encompassing all major production steps, including depalletizing, washing, filling, capping, labeling, packaging, palletizing, and stretch wrapping. The line has been regularly maintained, is equipped with newer components, and will be available from July 2025, as it is currently in operation. Technical Data - Output: up to 12,000 bottles/h - Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml - Product: Still and sparkling natural mineral water - Neck finish: S294 MCA - 1 - Bottle diameters: 170 mm, 205 mm, 218 mm, 259-271 mm, 295 mm - Packaging formats: - 250 ml: 24-bottle carton - 300 ml: 24-bottle carton - 500 ml: 12-bottle carton / 20-bottle shrink pack - 750 ml: 12-bottle carton - 1000 ml: 12-bottle carton / 12-bottle shrink pack Iedpfewhvc Rox Aausia - Years of manufacture: various (1991-2016) Scope of Supply - Depalletizer (TMG VEGA 50, 2001) - Depalletizer (Zecchetti DE Z 2T, 1993) - Bottle washer (Bardi NILO 1 16R, 2001) - Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) - Carbonator (Muvitec, 2001) - Decapper (Grassle REM 20, 1991) - Air conveyor (Europool TF 03, 2013) - Labeler (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) - Carton erector (Siat HM 145, 2001) - Case packer (Zacchetti IN Z 2T, 1993) - Carton sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) - Hotmelt unit (Preo EC5TRA2, 2001) - Palletizing robot (ACMI ZX165U, 2002) - Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) - Cap silo (3 Master ALN600LT, 2001)

Būklė: naudotas, Gamybos metai: 2016, Overview  This complete glass bottle filling line is part of a brewery and is used for filling beer into 330 ml glass bottles with crown caps. It consists of an automatic new bottle depalletizer, a self-adhesive labelling machine, a filling triblock, and a carton packer. The entire line was installed in 2017 by the Italian manufacturer Framax. The plant is still operational and can be viewed in person. All equipment remains installed and can be inspected during production.  Technical details  Production capacity: 2,400 bph (at 0.33l) Last processed formats: 0.33l Bottle diameter: 60mm, height adjustable 26mm crown cap Packaging: 6x4 carton  Scope of delivery Automatic new bottle depalletizer | Framax | DEPAL SS-3000 | 2017  Automatic layer pad removal Photoelectric sensors Self-adhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date / batch printer Counterpressure filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Rated capacity: 3,000 bph 16 rinsing stations 16 filling stations Single-head crowner with cap feeder Double air evacuation with CO2 Water spray device before capping to reduce residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017  Carton erector and packer With carton sealer Accessories such as conveyors, cooling, pumps Iiedpfxett Um Rs Aauja

Būklė: naudotas, Gamybos metai: 2010, Overview This bottle washing machine ARCADE GEL 6 was manufactured in 2010 by the German company GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in required throughput. Technical Details • Rated output: 33,000 bottles/hour • Adjustable range: 13,200 – 36,300 bottles/hour • Chain pitch: 169 mm • Cell pitch: 110 mm • Bottle cells per row: 30 units • Total bottle cells: 7,860 units • Bottle cells loaded: 7,680 units Consumptions • Compressed air: 1 m³ • Steam (operation): 489 kg/hour • Steam (heating up): 4,430 kg/hour • Electrical power: 48.4 kW • Water: 7.35 m³/hour Bath Volumes • Pre-soaking: 2,263 l Iiedst Ul Exopfx Aauja • Pre-lye: 7,240 l • Lye 1: 31,755 l • Lye 2: 350 l • Hot water 1: 350 l • Hot water 2: 350 l • Cold water: 350 l

Būklė: naudotas, Gamybos metai: 1993, Overview The bottle washing machine GM Gera NAGEMA Arcade DS was previously used in a brewery, where it operated in single-shift mode. As sales volumes have declined, the brewery's beer is now bottled at another location, freeing up this bottling line. Due to its low operating hours and regular maintenance, the machine is in very good condition. All tanks and the machine frame are made of stainless steel. Spare parts, such as bottle pockets, are also still available. Furthermore, in 2018, the main drive shaft as well as the SEW motor and gearbox were overhauled, and the carrier chain was replaced in 2015. The machine is still installed and can be demonstrated in operation. Technical data: Capacity: 23,000 bottles/hour Cell pitch: 85 mm Iijdpfx Asl Hx Adsausa Bottles per row: 16 Dimensions incl. attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: - Standard drives - Steam heating - Operator side left - CE certified - Chemical dosing pumps - Machine data sheet available - Fixed-pipe nozzles, cycle-controlled - Single-ended machine - Label discharge rear right - Finger discharge and feed - Bottle discharge left - Bottle pockets made of plastic - Lauer HMI - Caustic concentration measurement - 24 V control voltage - S5 control system (conversion to S7 available upon request) - Regularly maintained - Water component in stainless steel - Steam extraction - Sampling valves - KSB pumps in stainless steel - Insert strainers for baths - Water meter - Endress conductivity measurement Additional equipment: Spare parts included

Būklė: naudotas, Gamybos metai: 2012, Overview This complete filling line for returnable glass bottles was manufactured in 2012 by leading European producers Krones, Sidel, and Kettner. The line is designed for high-capacity beverage production and handles up to 42,000 bottles per hour in the 0.33-liter contour bottle format. It includes all essential components from depalletizing through end-of-line palletizing and labeling, making it a turnkey complete system for filling operations. The line underwent annual maintenance in August 2025 and was decommissioned on September 1, 2025. It remains installed and connected, and inspections can be arranged upon request. Technical Data Output: 42,000 bottles/h Formats: 0.33-L contour bottle Application: Beer, CSD, or other beverages in returnable glass bottles Line dimensions: approx. 103 × 29 m Condition: Excellent; maintained up to decommissioning (September 2025) Availability: Immediate Status: Still installed and connected Scope of Supply Depalletizer | Kettner | 60 pallets/h | 1992 | Automatic, glass bottles Crate Unpacker (Decrater) | Kettner | 2,500 crates/h | 1992 | For returnable crates Crate Washer | Seroba | 2,500 crates/h | 1992 | Stainless steel, single-bath Bottle Washer | Krones | 47,200 bottles/h | 2010 | Multi-zone cleaning Empty Bottle Inspector | Heuft | 46,000 bottles/h | 2012 | Camera system Filler | Krones | 42,300 bottles/h | 2012 | Glass bottles, recirculation mode Iiodpsxrcv Nefx Aauea Labeller | Krones | Topmatic | 2012 | 2 stations (body & back), 125mm pitch + Checkmat Fill level & closure inspection | Heuft | 43,000 bottles/h | 2012 | Sensor and camera system CIP & Mixer Station | KHS | 16,500 L/h | 2011 | Integrated, fully automatic Printer | Videojet | 43,000 bottles/h | 2012 | Inkjet printer Packer (Crater) | Kettner | 2,200 crates/h | 1992 | Automatic Palletizer | Kettner | 50 pallets/h | 1992 | Automatic Pallet Wrapper | Robopac | 50 pallets/h | 1992 | With stretch film Pallet Labeller | Logopak | 60 pallets/h | 2014 | Pallet labeling Bottle Conveyor Belts | Sidel Gebo | – | 2012 | Stainless steel conveying technology

Būklė: naudotas, Gamybos metai: 2013, Overview The bottle washing machine was manufactured by the German company Krones in 2013 and commissioned in 2014. It has been serviced annually. Additionally, a surfactant-based caustic cleaning system and spare parts can be purchased. DISMANTLING INCLUDED. Iiodpfx Aasl Hx Ensuea Technical data - Capacity: 66,000 bph - Maximum bottle diameter: 69 mm - Configured for the following formats: - Vichy 0.33l - Long-Neck 0.33l - Long-Neck 0.5l - NRW 0.5l - Steinie 0.33l

Būklė: naujas, Gamybos metai: 2020, KAINA: 2500 EUR Tipas: S 120 l Visiškai nerūdijančio plieno Talpyklos talpa: 120 litrų Vienguba darbinė ašis Ašies sukimas abiem kryptimis Apsauginis dangtis Elektros galia: 3 kW Įtampa: 220 V / 50 Hz Įrenginio matmenys cm: Plotis: 91 Ilgis: 65 Aukštis: 87 Pristatymo laikas: po išankstinio apmokėjimo, viena darbo diena Ijdsf S A Ivjpfx Aausia

Gamybos metai: 2013, būklė: naudotas, We hereby offer you a used PET bottle crusher from the manufacturer BOREMA, model R-1200 F, year of manufacture 2013, for residual emptying, degassing, and pre-compacting of PET bottles with volumes from 0.3 to 2.5 liters. The machine is equipped with a chassis and can be driven into and out of the feed chute of your baler. The throughput capacity is approximately 85,000 bottles or about 3 tons per hour. The following technical information is available: Manufacturer: BOREMA Umwelttechnik AG Model: R-1200 F (with hopper for inserting and removing the compactor) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Pre-fuse: 40 A Design: Continuous flow system Function: Double-rotor press system Rotor pre-tension: Pneumatic, approx. 16 t Overload protection via anti-blocking system Input material: Single-use and reusable PET bottles, 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 L capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air supply: G1/2", 8 bar, 40 L/min Compaction ratio: 1:3 Flange dimensions (internal): 972 x 1,220 mm (L x W) Infeed opening: 565 x 1,280 mm (L x W) Weight: approx. 2,500 kg Applications: Thanks to the chassis, the PET compactor can be positioned in the feed chute of your baler as needed, ensuring residual emptying, degassing, and pre-compacting of bottles and packaging. When changing materials, the PET compactor is simply removed from the feed chute, allowing materials such as paper, cardboard, films, etc., to be compacted without the unit. Iijdpfx Aaou Thpnouea BOREMA PET Compactor Process: Plastic containers are fed in by two rotating shafts. One shaft is pneumatically pre-loaded with two air bellows and presses the PET bottles against the second rotating shaft with 16 t of force. The sealed plastic containers are compressed, ruptured, and degassed in the process. Residual liquids drain away, and the pre-compacted material drops into the baler. In case of contaminants, the pneumatically pre-loaded shaft yields, allowing the contaminant to pass through without interruption. Key advantages over conventional PET perforators with punch pins or knives: The BOREMA process is considerably more efficient and less prone to wear compared to conventional PET perforators with punch pins or knives. The major advantage is that contaminants (e.g., metal parts, stones, bottles with frozen contents, wood pieces) pass through the pneumatically yielding rotor shaft without interrupting operation or causing major damage. In conventional perforators, pins or knives can break off or become severely jammed with contaminants, requiring shutdown and costly repairs. Notes: Complete documentation (Operating Manual, CE, electrical/hydraulic diagrams) is available. Inspection by appointment is possible. No liability is assumed for technical data or possible errors.

Būklė: naudotas, Gamybos metai: 2010, mašinos/transporto priemonės numeris: M245, Used Galdi filling monoblock, max. output 6,000 bottles per hour Introduction to advanced filling technology The Galdi RG260A, a high-performance filling monoblock from 2010, is regarded as a cornerstone of modern filling lines. Following a recent overhaul, it demonstrates unmatched efficiency and reliability. With speeds of up to 6,000 bottles per hour, this machine sets industry standards. It is specifically designed for Pure-Pak Diamond Standard Curve B-style T-Bottom containers. Additionally, it uses 36mm Elocap closures, showcasing its versatility and adaptability to diverse packaging requirements. Ensuring unsurpassed product safety with the Galdi filling monoblock A critical feature of the Galdi RG260A is its disinfection rate, reaching up to LOG5, which guarantees the highest levels of product safety. This capability is particularly vital in a market where consumer health and safety are of utmost importance. The machine’s design and operating protocols therefore comply with stringent hygiene standards, providing producers with peace of mind. Adaptability to a broad product range The flexibility of the machine is underpinned by its ability to handle various package cross-sections. From 500 ml to 1,000 ml, it can process different product volumes. This adaptability extends to its capacity to handle a wide range of products—including dairy, juices, liquid foods, or substances with high viscosity. Its design also supports products containing particles and fibers, ensuring smooth operation without compromising quality. Tailored efficiency in closure application Specifically tailored to customers’ requirements, the machine features a 36 mm XE cap applicator. It also includes a closure feed system that increases operational efficiency. The inclusion of a CIP (clean-in-place) return pump underscores the machine’s commitment to hygiene and easy maintenance. By utilizing gravity or light-pressure filling, it ensures accurate and gentle product handling. Technological excellence for optimum performance Iedsvgt N Hjpfx Aausia Furthermore, the Galdi RG260A is equipped with advanced technological components. These include a double-indexing magazine and a LOG5 sterilization system. Sterile air filters and a servo-driven horizontal closure applicator further contribute to its superior performance. The aseptic double-membrane filler with specialized inlet and outlet valves ensures a hermetic seal from external environments. Innovative filling solutions with the Galdi filling monoblock Additionally, the machine uses a bottom-up filling system designed to reduce splashing and foaming. This approach is crucial for maintaining product integrity and appearance. A specially enclosed filling box for the aseptic filling chamber and an automatic CIP-SIP (clean-in-place/sterilize-in-place) system further enhance sanitary conditions. Pressurized by sterile air steam, the system maintains a sterile environment throughout the entire filling process.

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: AT86, Used Heating Tunnel Omar R&G HTD12, year of manufacture 2017, up to 12,000 bottles per hour Technical Data and Application of the HTD12 Heating Tunnel The used Omar R&G HTD12 heating tunnel from 2017, with a capacity of up to 12,000 bph, heats bottles using a hot water system, making it ideal for filling line applications. Additionally, this heating tunnel operates reliably and features advanced technical specifications. It handles cylindrical bottles in various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The heating tunnel is equipped with a hot water heat exchanger, requiring users to supply hot water via a gas boiler. This allows for uniform heating of bottles and optimizes the workflow. Furthermore, the recirculation pump and dryer have a combined energy consumption of 53 kW, ensuring energy efficiency with consistently high performance. The tunnel processes 12,000 bottles per hour (bph), making it particularly suitable for high-speed bottling lines. The FIFO (First In First Out) system organizes the bottles into a continuous and orderly flow, ensuring even thermal treatment. Regarding compatibility, the machine processes cylindrical bottles with diameters from 60 mm to 100 mm, offering versatility for different container formats and types. The tunnel operates counterclockwise (from right to left), which caters to specific plant layout requirements. Operating Conditions and Manufacturing Details The HTD12 heating tunnel operates in its current condition; therefore, buyers should thoroughly inspect the machine prior to purchase. Notably, the manufacturer built this model in 2017, providing a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for manufacturing high-quality machines for the bottling industry, designed the HTD12 model for intensive use, thus maintaining operational safety even in demanding environments. Technical and Functional Advantages The hot water heat exchanger ensures accurate temperature control for uniform bottle heating. The FIFO system maintains bottles in their original input sequence, minimizing delays or processing errors. Moreover, the modular design and optimized layout simplify maintenance and allow users to easily integrate the tunnel into existing plants. The system also accommodates bottles with various diameters, offering versatility for different industrial applications. Isdpfx Aovxz Axjauoia Conclusion on the HTD12 Heating Tunnel The used Omar R&G HTD12 heating tunnel, year 2017, up to 12,000 bph, offers a powerful, reliable, and versatile solution for bottle heating. The machine processes up to 12,000 bottles per hour, efficiently arranges bottles with the FIFO system, and supports various formats. Therefore, it proves to be an excellent choice for high-perform...

Būklė: naudotas, Gamybos metai: 1999, veikimo valandos: 500 h, mašinos/transporto priemonės numeris: LC392, Used Complete Water Bottling Line (Still Beverages) 300 BPH 18.9 L CapSnap The CapSnap Adapta Series is a modular, integrated system for bottle washing, filling, and capping. It is the perfect solution for medium-sized HOD (Home & Office Delivery) water bottling operations. Designed for adaptability – these machines can be configured for 3-gallon and 5-gallon bottles. This complete system efficiently handles 300 – 600 BPH (bottles/hour). Iisdpsvgud Sjfx Aauoa Manufacturer: CAP SNAP – Portola – USA Year of Manufacture: 1999 (completely overhauled in 2015 and has only operated for 500 hours since) Capacity: 300 BPH (bottles/hour) Required Utilities: Compressed air 6 bar, electric power 40 kW, rinse water supply 2 bar, and fill water supply Line Configuration: - Semi-automatic cap remover: Used to remove caps from bottles. - Infeed conveyor: Bottles are manually placed on this conveyor. - Pre-rinse with cold water through nozzles: The first washing stage using cold water. - Wash with warm water and detergent through nozzles: The second washing stage with 50°C water and detergent. - Rinse with cold water and disinfectant through nozzles: The final washing stage using cold water and disinfectant. - Filler outfeed conveyor: Bottles are filled here, two at a time. - UV filter: Water is filtered through a UV filter integrated into the water inlet of the bottle. - Transfer of filled bottles to the capper: Bottles are conveyed from the filler to the capper. - Disinfection of caps by applying disinfectant at the bottleneck: Caps are disinfected and prepared for application. - Capping cylinder: Caps are applied to the bottles here. - Outfeed conveyor: Bottles are manually loaded onto pallets from here. Each part of this system plays a specific role in the bottle filling process, and together they form a functional, used complete bottling line for water.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, veikimo valandos: 400 h, Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 438 mm, bendras ilgis: 6 058 mm, bendras aukštis: 2 591 mm, tuščias svoris: 9 500 kg, įėjimo įtampa: 400 V, Pilna PET butelių pūtimo ir 1 l vandens išpilstymo linija. Uždaryta konteineryje, visiškai savarankiška – su generatoriumi, vandens paruošimo įranga, kompresoriumi ir visa reikiama infrastruktūra. Papildoma informacija nuotraukose ir „YouTube“ filmuose. Ijdox Hqrwjpfx Aauoia