Susitraukimo Įrenginys pirkti naudotą (22 686)

Gamybos metai: 2009, būklė: naudotas, mašinos/transporto priemonės numeris: 0301-260004, Kaltenbach KBS 1010 DG - KDX-S 1015 BEAM DRILL-SAW LINE The Kaltenbach KBS 1010 DG - KDX-S 1015 drill-saw combination consists of a CNC-controlled Kaltenbach KBS 1010 DG band saw and a Kaltenbach KDX-S 1015 drilling unit. This drilling and sawing system is perfectly suited for cost-effective sawing, drilling, center marking, scribing, and thread cutting of beam and flat steel bars in steel fabrication and steel trading. The Kaltenbach KDX-S drilling unit comes equipped with three drilling spindles, each with a 26 kW drive motor and individual 5-position automatic tool changers. The Kaltenbach M150 length measuring system (measuring carriage), together with the T13 transport system, is designed for profiles up to 18 meters in length. The extensive material handling system for profile steel also features cross transfers on the infeed and outfeed sides for lateral profile transport. The CNC control unit, together with Kaltenbach Profiline III software, enables data processing in DSTV and DXF formats. The entire system features an ergonomic working height, with a material level to floor upper edge of 640 mm, providing the operator with excellent visibility. Removal and separation of cut-offs or onward transfer of the profile to the outfeed is handled by a gripper after the saw. The Kaltenbach KBS 1010 DG - KDX-S 1015 saw-drill combination consists of: PROFILE STEEL DRILLING LINE Kaltenbach KDX-S 1015 Ksdpoymy Imjfx Af Hodl MITERING BAND SAW Kaltenbach KBS 1010 DG MACHINE CONTROL Kaltenbach Profiline III LENGTH MEASURING DEVICE Kaltenbach M 150 TRANSPORT SYSTEM Kaltenbach T13

Būklė: geras (naudotas), Gamybos metai: 2000, Briaunų frezavimo staklės, briaunų frezavimo įrenginys, nuolynų frezavimo staklės, mobilios frezavimo staklės, suvirinimo siūlių briaunų formavimo įrenginys, suvirinimo siūlės paruošimo staklės, nušlifavimo įrenginys, nušlifavimo staklės. - Briaunų frezavimo staklės: su reguliuojamu sukimosi greičiu - Gylio nustatymas: 0 - 7 mm Kdsdey Rt Aaepfx Af Hel - Variklis: 0,75 kW - Reguliuojamas greitis: 0 - 6000 aps./min - Kampas: 45° - Priedai: Widia frezavimo galva - Matmenys: 650/560/H1190 mm - Svoris: 94 kg

Būklė: geras (naudotas), Talpyklos sukamasis įrenginys, katilų sukamasis įrenginys, suvirinimo sukamasis įrenginys, suvirinimo sukamasis stalas, suvirinimo prietaisas, suvirinimo sukamasis stalas, suvirinimo sukamasis įrenginys -Talpyklos sukamasis įrenginys: suvirinimo sukamasis įrenginys ant bėgių važiuoklės -Pavaros variklis: Kjdpoy Rtkdsfx Af Hsdl -Keliamoji galia: 3500 kg -Ritinėlių atstumas: 280 - 1230 mm -Ritinėliai: Ø 255 x 50 mm -Sukimo greitis: 0,0 iki 0,75 m/min, sukimas į dešinę/kairę, sukimas į kairę -Valdymo blokas: su rankiniu valdymu ir pėdos pedalu -Atskiri komponentai: žr. nuotraukas -Transportavimo matmenys: 1205/2330/H1010 mm -Svoris: 830 kg

Gamybos metai: 2023, būklė: naudotas, mašinos/transporto priemonės numeris: 0799-250012, TM Minibox by Hartner – The compact solution for maximum tool control Increase your efficiency right at the workstation: The TM Minibox is the smart, space-saving tool dispensing system for your production environment. Whether as an entry point into digital tool management or as an addition to your existing infrastructure – with the TM Minibox, you can take your manufacturing to the next level. Kjdpjwpr Tnsfx Af Hjdl

Gamybos metai: 2009, būklė: naudotas, mašinos/transporto priemonės numeris: 0301-230036, Kaltenbach drilling and sawing system as a combined unit for use in light to heavy steel construction. With this Kaltenbach system, steel profiles can be drilled, center-punched, and cut to length in a single operation. Rolled profiles such as I-beam, T-steel, channel steel, angle steel, hollow sections, and flat steel are processed here. The drilling unit of the system features an automatic tool changer on three drilling spindles, each capable of holding five tool sizes. The tools are positioned with high precision via ball screw spindles and servo motors. Kodpforr Sq Nox Af Hodl The entire system is equipped with a length measuring device. Technical specifications KDXS 1215 drilling unit: • Working area min. 80 x 65 x 10 mm • Working area max. 1200 x 450 mm • 3 drilling units (vertical Y-axis, horizontal Z- and W-axis), each 11.0 kW with frequency inverter: total 33.0 kW • Automatic tool changer (3x5) • Drive power, frequency-controlled: 78 kW • Working height: 640 mm • Machine dimensions: 6100 x 1300 x 3730 mm (LxWxH) • CNC control with Profiline 3 software Kaltenbach HDM 1432 high-performance circular saw as a vertical saw with swivel mounting for high cutting performance of medium and heavy steel profiles. Working area at 90° mitre cut: 1200 x 450 mm. Mitre adjustment for angle cuts from -45°/90°/+35°. This circular saw unit is equipped with a segment saw blade, diameter 1430 mm. High cutting capacity thanks to a powerful drive. NC-controlled cutting angle adjustment. Feed via ball screw spindle for optimal cutting results and short cycle times.

Būklė: naudotas, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: siehe Beschreibung, Dulkių šalinimo sistema: - 57 000 m³/h - Maišinių filtrų tipas RTFAE550S-JET-SF (be filtravimo maišų, seni pašalinti) - Sraigtinis transporterio tipas TRFS400ATEX - Langelio rotacinis vožtuvas tipas RTZ5050ATEX-S-CR-SEW - Ciklonas tipas RTZA2500-D - Kulisų tipo garso slopintuvas Ksdpoy Rzihofx Af Hedl - Suspausto oro kompresoriai + talpykla, tipas ALUP Largo 15, 15 kW variklis

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras svoris: 50 kg, galia: 1,1 kW (1,50 AG), bakelio talpa: 10 l, Medžiagų transportavimo įrenginys Simar FX 2504 Variklio galia: 1,1 kW (šepečinis variklis) Maitinimas: 230 V / 50 Hz Talpyklos tūris: apie 5 litrus Transportavimo našumas: apie 150 – 200 kg/val. (priklausomai nuo medžiagos) Kedpfx Afoy Hlv Re Hjdl Maks. transportavimo atstumas: apie 15 – 20 metrų Vamzdžio / žarnos skersmuo: 38 mm (DN 38) Korpuso medžiaga: poliruotas nerūdijantis plienas Dažų dozatorius Simar FDX-2 Pavaros tipas: žingsninis variklis (dideli tikslūs kartotiniai apsisukimai) Maitinimas: 230 V / 50 Hz Apsisukimų greitis: tolygiai reguliuojamas (priklausomai nuo valdymo įrenginio, paprastai 0,1 – 200 aps./min.) Dažų talpyklos tūris: apie 5 – 10 litrų

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, galia: 1 kW (1,36 AG), Simar FX 2004 medžiagų tiekimo įrenginys Variklio galia: apie 0,9–1,1 kW (šepetėlinis variklis) Maitinimas: 230 V / 50 Hz Talpa: apie 3–4 litrai Tiekimo našumas: apie 60–100 kg/val. Žarnos jungties skersmuo: 38 mm (standartinis) Filtravimas: poliesterio filtras su automatiniu valymu Dažų dozatorius Simar FDX-2 Pavaros tipas: žingsninis variklis (didelis apsukų pasikartojamumo tikslumas) Maitinimas: 230 V / 50 Hz Ksdey Hldnopfx Af Hedl Apsisukimų dažnis: be žingsnių reguliuojamas (priklauso nuo valdymo bloko, paprastai 0,1–200 aps./min.) Dažų talpos talpa: apie 5–10 l Yra dvi sistemos Kaina: 950 EUR už sistemą!

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Juostinių pjūklų geležčių įtempimo įrenginys Ksdpjyki Hgsfx Af Hjdl

Būklė: geras (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, bendras svoris: 50 kg, galia: 1,1 kW (1,50 AG), bakelio talpa: 3 l, Variklio galia: 1,1 kW (šepečio variklis) Energijos tiekimas: 230 V / 50 Hz Kdodpsy Hk I Sofx Af Hsl Talpos tūris: apie 5 litrus Perkėlimo našumas: apie 150 – 200 kg/val. (priklausomai nuo medžiagos) Maks. perkėlimo atstumas: apie 15 – 20 metrų Vamzdžio/žarnos skersmuo: 38 mm (DN 38) Korpuso medžiaga: poliruotas nerūdijantis plienas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras svoris: 20 kg, galia: 1 kW (1,36 AG), bakelio talpa: 3 l, Variklio tipas: Vienfazis (šepetėlinis variklis / vakuuminis pūstuvas) Variklio galia: apie 1,0 – 1,1 kW Energijos tiekimas: 230 V / 50 Hz Talpyklos tūris: apie 3 litrus Kdodpfx Afey Hk D Tj Hel Transportavimo našumas: iki apie 100 kg/val. (priklausomai nuo medžiagos birios masės tankio ir žarnos ilgio) Žarnos jungties skersmuo: DN 38 (standartinis) Korpuso medžiaga: nerūdijantis plienas (V2A) Valdymas: mikroprocesorinis valdymas, programuojamas filtro užpildymo ir valymo laikas Turime 2 vnt. Kaina: 480 EUR / vnt.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2.23024635/4097, bendras svoris: 15 kg, įvesties srovės tipas: Oro kondicionierius, galia: 1 kW (1,36 AG), bakelio talpa: 10 l, Variklio galia: 1 kW Kedpfjy Hkyhox Af Hsdl Maitinimo įtampa: 230 V AC (+/- 10 %) Dažnis: 50–60 Hz Talpos tūris: apie 10 litrų Pajėgumas: apie 10–120 kg/val. (priklausomai nuo medžiagos ir atstumo) Reikalingas suslėgto oro prijungimas: apie 5 bar (filtrų valymui/valdymui) Įrenginio svoris: apie 15 kg Medžiaga: nerūdijantis plienas

Gamybos metai: 2025, būklė: naujas, SQUALO 420 tipo dvigubos ašies daugkartinis diskinis pjūklas yra moderni, lengvai valdoma, tiksli ir itin patikima mašina. Pagrindiniai varikliai 2x45 kW, parduodama dėl projekto žlugimo! Jeigu turite klausimų, drąsiai kreipkitės! Kjdpfx Asy Sw Eujf Hsdl

Būklė: naudotas, Gamybos metai: 2012, Automated Plant / Application Area: Chrome Plating, Nickel Plating, Copper Plating / Programs: Pre-cleaning, Pretreatment, Metallization, Post-treatment / Base Materials: ABS and ABSPC / Technical Data: Work window per carrier 2800 mm x 1700 mm x 300 mm, max. 8 square meters of electroplated surface per carrier, cycle time 3.00 min. plating, cycle time 2.50 min. demetallization / Capacity: 20 carriers per hour, clear distance anode/anode for chromium 700 mm, copper 700 mm, nickel 700 mm, clear entry dimension 550 mm in travel direction, 3100 mm in width, bath dimensions (rinses) 3100 mm x 700 mm / Power Consumption: Drives: conveyor system 133 KW, filters 194 KW, exhaust air 229 KW, wastewater plant 150 KW, switchgear 704 KW, rectifiers approx. 3190 KW, heating energy approx. 1410 KW / Comprising: automatic loading system with 135 carriers, 5 loading and unloading stations, wastewater treatment plant and exhaust air treatment system / Tanks, electroplating baths, and exhaust air system made of chemically resistant plastics. NOTE: Various ongoing extensions and modernizations of the plastic electroplating plant since 2015! Kdedpoy Rvtuofx Af Hjl

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special Price: €29,970 net One machine is available immediately. This is the ideal machine for shredding voluminous, lightweight aluminium chips or turnings. Not suitable for more solid aluminium parts. Included: + Optimized cutting geometry + Adapted pusher control + Load-dependent hydraulic pusher (which presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control system: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation selectable (15 - 40mm) Extraction connection Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Shredder raised by 30 cm (preparation for conveyor belt) +€2,990 net - Angle conveyor (discharge height approx. 220 cm) +€9,770 net - Overband magnet +€6,980 net - Control system for conveyor and overband magnet +€2,750 net (start and stop synchronized with shredder) Kodpfx Asgmh H Tjf Hedl We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Demonstration machine with approx. 9 operating hours One more machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput capacity We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple turning positions Option of double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% a.d. (absolutely dry basis) Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC controller - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed 70-90 rpm for high throughput - Cycling control to minimize idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform. Optional shredder features at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or material thickness less than 3 mm) - Angled conveyor belt + €8,770 net Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overband magnet + €5,980 net Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net Kdodpfx Aeb Ny Eyof Hsl Material requirements: - Moisture content (a.d.) must be less than 30% - Installation temperature: heated area with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, offcuts from wood pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced load uptake) - Minimal cutting gap between cutter and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control system: PLC Feed opening (top): 600 x 800 mm Recommended maximum material size: approx. 500 x 500 mm (*height less relevant) Hydraulically actuated pusher Screen perforation to choice (25–40 mm). For plastics, coarser screens (30–40 mm) are recommended. *If finer granulation is required, a two-stage shredding process with a downstream MVZ granulator (screens 5–15 mm) is recommended. Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Additional options for surcharge: - Shredder base raised by approx. 25 cm (prepared for conveyor discharge) + €1,980 net - Angle belt conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (start and stop synchronized with shredder) - Alternatively, manual start and stop on conveyor + €595 net Material requirements: - Moisture content (atro) must be below 25% - Metal and mineral contaminants such as sand or stones increase wear. We will gladly arrange a free trial with your material at our location in Neckartailfingen. Alternatively, you can ship your material to us, and we will document the test with photos and videos. --- *Only suitable for brittle plastics with medium hardness *Not suitable for elastic or extremely hard and heavy plastics, as this may affect machine durability. --- Larger machine versions available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Feed opening (top): 800 x 1,000 mm Max. material size approx. 720 x 700 mm (*height less relevant) From €39,995 net – options priced as required Base machine: Shredder MGZ 1030 K-S – 22 kW Feed opening (top): 1,000 x 1,000 mm Max. material size approx. 900 x 700 mm (*height less relevant) From €49,975 net – options priced as required Kdsdpsd H R Sxsfx Af Hel Base machine: Shredder MGZ 1330 K-S – 37 kW Feed opening (top): 1,300 x 1,200 mm Max. material size approx. 1,200 x 700 mm (*height less relevant) From €79,975 net – options priced as required

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (RPM): 65–125 Power requirement (kW): 37 Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Kdsdsgbkkrspfx Af Hjl Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.

Būklė: naujas, Gamybos metai: 2026, Comprising Large Bale Breaker Type MHB and Straw Shredder Type MHZ 1) Bale Breaker MHB: Special offer starting at €22,975 net (approx. 15 weeks lead time) Suitable for round or square bales. Includes frequency converter (FU) to regulate the feed rate of the drag floor. Bales are placed on the drag floor, and the cutter head is engaged. The cutter tines break up the straw from the bale and eject it into the hopper. Ideally, the bale breaker and straw shredder are used in combination. Technical Data – Bale Breaker: • Throughput: 1–2 bales per hour • Up to 600 kg/hour depending on screen size and motor output in the straw mill; up to 900 kg/h if running the bale breaker standalone (without a straw mill) • Max. bale size (square): 2400 x 1200 x 800 mm (LxWxH) • Cutter motor: 5.5 kW, 380 V • Drag floor feed: 0.75 kW, 380 V • Dimensions: 3750 x 1730 x 2460 mm (LxWxH) • Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special offer starting at €6,995 net Extra charge for larger straw shredder (18.5 kW): + €2,750 net Technical Data – MHZ with special hopper: • Motor: 15 kW, 380 V electric • Diameter: 600 mm • Hardened cutting knives • Screen with interchangeable inserts • Optional holes: (10, 12, 15) 22, 30, 45 mm Kdjdjb Nulhspfx Af Hsl • With star-delta switch, overload protection, and 8 m supply cable (ready to plug in) • Discharge nozzle: 160 mm • Blowing distance: approx. 12 m • Dimensions: approx. 1600 x 1020 x 1360 mm (LxWxH) • Weight: approx. 240 kg --- Optional extras (additional cost): - Feed auger: + €970 net - Cyclone (suspension/mounting by customer), max. 10 m distance: + €2,970 net - Simple filter: €1,750 net --- Further options: - Industrial extraction system (demo unit): from €9,950 net - Optional rotary airlock (enables pressureless discharge): + €5,750 net - Control unit: from €1,620 net - Special bale breaker extension (3 m; other sizes on request): + €9,750 net - Briquette press MPP 180 S (lightly used demo unit), 70 mm briquette, up to 100 kg/h: from €39,700 net • Larger machines available on request --- Description: The muetek Bale Breaker was developed for processing round and square bales of hay and straw. The attached shredder processes straw from all types of cereal crops, hay, corn, and miscanthus. muetek machines from the MHZ / MHB series are known for their robust construction and heavy-duty build. muetek MHB series bale breakers are equipped with a chain conveyor onto which the straw bale is placed using a front loader. The support is adjustable according to the type of bale. The chain conveyor presses the bale against the milling rotor, with an adjustable feed rate. The milling rotor is fitted with multiple teeth to break up the straw bale. The separated straw is ejected. --- The machines are designed for processing dry materials: - Straw - Hay --- Bale breaking of hemp requires a special breaker: • Surcharge approx. €9,720 net (depending on configuration). Hemp processing is not possible with the straw mill. Feedstock requirements: • Moisture content max. 12%

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput highly dependent on screen and input material: - up to 60 kg/h when processing EPS with a 15 mm screen *the coarser the screen, the higher the throughput Motor: 9.2 / 11 kW – 400 Volt Robust steel construction, hardened cutting knives, screen with interchangeable inserts, available perforations (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive, supplied with star-delta switch, overload protection, and 8 m power cable, plug-ready. Discharge spout: 150 mm, optionally suitable for plastic or grain pipes, blowing distance approx. 12 m. Chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires. Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare part prices and options: Kdsdpfx Afeh S H T Us Hsl 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Reikalavimai žaliavai: - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. Kjdpfxowzarco Af Hsdl . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Kjdpfxod Db N Ij Af Hodl Moisture content of raw material must be under 30% (absolutely dry). Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naudotas, Smulkinimo mašina MGZ 1330, 37 kW Darbo valandos: 275 Įskaičiuota: - 2-asis peilių eiliškumas - Greita hidraulika didesniam našumui - Paruošta konvejeriniam juostai Pasirenkama: - Konvejerinė juosta su automatiniu metalo separatoriumi Jūsų privalumai: + itin didelė pjovimo agregato anga; viršuje: 1300x1200 mm + specialus rotorius, tinkamas tiek kietmedžiui, tiek minkštmedžiui + energiją taupanti ir galinga su 37 kW paleidimo galia Techniniai duomenys: Pajungimo anga viršuje (mm): 1.300 x 1.200 Piltuvo talpa (m³): 1,6 Rotoriaus skersmuo (mm): 368 Rotoriaus greitis (aps/min): 65–125 Galingumo poreikis (kW): 37 Sieto skylės (mm): pagal susitarimą Įrankiai: 37/70 peilių Kedpfxjx Tfdhs Af Hedl Ištraukimo antgalio Ø (mm): 200 Matmenys: 2430x2410x1735 mm (ilgis x plotis x aukštis) Svoris (apytiksliai kg): 3.500 --- Reikalavimai žaliavai: - Drėgnumas (atro) turi būti mažesnis nei 20 % - Tiekiama medžiaga turi būti be metalo ir mineralinių priemaišų. Priešingu atveju gali kilti įrankių pažeidimų ir/ar padidėti susidėvėjimas.

Gamybos metai: 2008, būklė: naudotas, Naudota pramoninė rentgeno tikrinimo sistema, skirta nedestruktyviam detalių bandymui ir kokybės kontrolei, su „Phoenix x-ray“ valdymo pultu ir apsaugine bandymų kamera. Gamintojas: phoenix|x-ray Systems + Services GmbH Modelis: x|argos 160 Mašinos tipas: Pramoninė rentgeno tikrinimo sistema Pagaminimo metai: 2008 Serijos numeris: NDT01G0001-131308 Tinklo įvadas: 3x400 VAC Dažnis: 50/60 Hz Energijos suvartojimas: 3000 VA Pilna apkrovos srovė: 3x4,5 A Trumpinimo apsaugos įrenginys: 10 A Trumpinimo atjungimo galia: 10 kA Rentgeno generatorius: Gulmay UC225/10 Generatoriaus įtampa: 220 V Generatoriaus dažnis: 47–63 Hz Kdjdey S Rwqopfx Af Hjl Generatoriaus srovės vartojimas: 2,7 A Yra CE ženklinimas Komplekte: valdymo pultas su monitoriais ir valdymo svirtimi Uždara spinduliuotės apsaugos kabina Vidaus erdvėje yra linijiniai pajėgumai ir sukamasis stalas Būklė: naudota

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), Siūlomas plokščias stiklo pjovimo įrenginys. Darbinė sritis X/Y: 3700mm/2600mm, stiklo storis: 2mm-19mm, pjovimo greitis: 120m/min, padėties tikslumas: +/-0,15mm, stalo paviršius: veltinio danga su oro pagalvės funkcija, tiltinė konstrukcija linijiniam ir formos pjovimui, lūžio juostos: pneumatinis valdymas, valdymas: CNC valdymas. Svoris: apie 3200 kg, bendri matmenys X/Y/Z: apie 4650mm/3400mm/1350mm. Apžiūrėti galima pagal susitarimą. Kdsdpfx Ajy Tn Hrsf Hel