Mg 3000X22 Mm 4 Roll pirkti naudotą (107 271)

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €52,700 Leasing rate: €996.03 Bending length: 2,550 mm Max. bending capacity – structural steel: 10 mm Max. sheet thickness without pre-bending at D = 5x top roll: 10 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 5x top roll: 8 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 245 mm Bottom roll diameter: 245 mm Side roll diameter: 180 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4,800 mm Width: 1,600 mm Height: 1,470 mm Weight: 6,170 kg 4 rolls Top roll drive by hydraulic motor and planetary gearbox, bottom roll drive by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Itedpfx Abjyb Sykovog Hardened rolls Conical bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL ROLLING: Maximum sheet thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Estimated delivery time: approx. 12-14 weeks from order Country of origin: Turkey Price: €98,600 Leasing rate: €1,863.54 Bending length: 3,100 mm Maximum bending capacity (mild steel): 16 mm Maximum plate thickness without pre-bending at D=5x top roll: 16 mm Maximum plate thickness without pre-bending at D=3x top roll: 13 mm Maximum plate thickness without pre-bending at D=1.5x top roll: 16 mm Maximum plate thickness with pre-bending at D=5x top roll: 14 mm Maximum plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 300 mm Bottom roll diameter: 300 mm Side roll diameter: 240 mm Maximum opening: 50 mm Working height: 1,140 mm Ijdpeynm Hfefx Abvstg Motor power: 18.5 kW Length: 5,310 mm Width: 1,660 mm Height: 1,140 mm Weight: 11,100 kg 4 rolls PLC control Fully hydraulic drive of the top and bottom rolls (for all four rolls from 30 mm bending capacity) via planetary gears Hydraulic side roll adjustment with electronic synchronization Hydraulic bottom roll adjustment with mechanical synchronization Adjustable clamping pressure Variable roll speed Hardened rolls Cone bending device Hydraulic drop end Mobile control panel Overload protection Operating manuals available in GERMAN and ENGLISH Equipment in compliance with CE regulations OPTIONS: Top and side sheet supports NC controller IMPORTANT NOTES FOR CONICAL BENDING: Maximum plate thickness is 50% of the nominal capacity Cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €103,100 Leasing rate: €1,948.59 Bending length: 2,550 mm Max. bending capacity - mild steel: 25 mm Max. sheet thickness without pre-bending at D = 5x top roll: 25 mm Max. sheet thickness without pre-bending at D = 1.5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 5x top roll: 20 mm Max. sheet thickness with pre-bending at D = 1.5x top roll: 16 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 5,500 mm Width: 2,000 mm Height: 1,900 mm Weight: 13,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment for bottom and side rolls Digital readout for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Iedoynm Eujpfx Abvjtg Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of nominal capacity The cone length may be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €97,400 Leasing rate: €1,840.86 Bending length: 2050 mm Max. bending capacity - mild steel: 30 mm Max. plate thickness without prebending at D = 5x upper roll: 30 mm Max. plate thickness without prebending at D = 1.5x upper roll: 25 mm Max. plate thickness with prebending at D = 5x upper roll: 25 mm Max. plate thickness with prebending at D = 1.5x upper roll: 20 mm Upper roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5 - 5 m/min Motor power: 22 kW Itsdpfxeynm Ens Abvsg Length: 5000 mm Width: 2000 mm Height: 1900 mm Weight: 11,000 kg 4 rolls Fully hydraulic drive of upper and lower roll Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of the upper roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. plate thickness is 50% of the nominal capacity The cone length must not exceed 30% or must be more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,700 Leasing rate: €1,014.93 Bending length: 2050 mm Maximum bending capacity (mild steel): 16 mm Max. plate thickness without pre-bending at D = 5x top roll: 16 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 13 mm Max. plate thickness with pre-bending at D = 5x top rolls: 13 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 10 mm Top roll diameter: 260 mm Lower roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 4300 mm Width: 1600 mm Height: 1550 mm Weight: 6100 kg Four rolls Top roll driven by hydraulic motor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Conical bending device Hydraulic release of top roll Hydraulic drop-end bearing Two working speeds Overload protection Mobile control panel Equipment according to CE regulations Itjdpfxjynm Ehe Abveg OPTIONS: - Infinitely variable rolling speed - Hydraulic side support - Hydraulic top support - NC control IMPORTANT POINTS FOR CONICAL ROLLING: - Maximum plate thickness for conical rolling is 50% of rated capacity - Cone length must be max. 30% or more than 60% of roll length - Hardened rolls are recommended

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €111,500 Leasing rate: €2,107.35 Bending length: 3,100 mm Max. bending capacity – carbon steel: 20 mm Max. plate thickness without pre-bending at D=5x top roll: 20 mm Itedjynm Ebopfx Abvjg Max. plate thickness without pre-bending at D=1.5x top roll: 16 mm Max. plate thickness with pre-bending at D=5x top roll: 16 mm Max. plate thickness with pre-bending at D=1.5x top roll: 12 mm Top roll diameter: 350 mm Lower roll diameter: 350 mm Side roll diameter: 260 mm Rolling speed: 1.5–5 m/min Motor power: 22 kW Length: 6,000 mm Width: 2,200 mm Height: 1,900 mm Weight: 15,000 kg 4 rolls Fully hydraulic drive for top and bottom rolls Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Device for conical bending Hydraulic relief of top roll Hydraulic drop-end bearing 2 working speeds Centralized lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONE ROLLING: The maximum plate thickness is 50% of the nominal capacity The cone length must be a maximum of 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €60,600 Leasing rate: €1,145.34 Bending length: 3,100 mm Max. bending capacity (mild steel): 10 mm Max. sheet thickness without pre-bending at D=5x top roll: 10 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 8 mm Max. sheet thickness with pre-bending at D=5x top roll: 8 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 6 mm Top roll diameter: 260 mm Bottom roll diameter: 260 mm Side roll diameter: 200 mm Rolling speed: 1.5 / 6 m/min Motor power: 7.5 kW Length: 5,350 mm Width: 1,600 mm Height: 1,550 mm Weight: 7,685 kg 4 rolls Top roll drive via hydraulic motor and planetary gearbox, bottom roll drive via gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic top roll release Hydraulic drop-end 2 working speeds Overload protection Movable control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Itedsynm D Rjpfx Abvog IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of the nominal capacity Cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €32,480 Leasing rate: €620.37 Bending length: 1,550 mm Itjdpfx Aoynmzpsbvjg Max. bending capacity (mild steel): 9 mm Max. sheet thickness without prebending at D = 5x top roll: 9 mm Max. sheet thickness without prebending at D = 1.5x top roll: 7 mm Max. sheet thickness with prebending at D = 5x top roll: 7 mm Max. sheet thickness with prebending at D = 1.5x top roll: 5 mm Top roll diameter: 180 mm Lower roll diameter: 180 mm Side roll diameter: 150 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,250 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, lower rolls driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital readout for lower and side roll positions Hardened rolls Cone bending device Hydraulic release of top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE standard OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT NOTES FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length may be max. 30% or must be more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €73,200 Leasing rate: €1,383.48 Bending length: 2050 mm Max. bending capacity – mild steel: 20 mm Max. plate thickness without pre-bending at D = 5x top roll: 20 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 16 mm Max. plate thickness with pre-bending at D = 5x top roll: 16 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 12 mm Top roll diameter: 280 mm Bottom roll diameter: 280 mm Side roll diameter: 220 mm Rolling speed: 1.5 / 5 m/min Motor power: 16.5 kW Length: 4350 mm Width: 1700 mm Height: 1850 mm Weight: 8,550 kg 4 rolls Fully hydraulic drive of top and bottom rolls Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic relief for the top roll Hydraulic drop-end bearing 2 working speeds Central lubrication Overload protection Mobile control panel Equipment in accordance with CE regulations OPTIONS (PRICES ON REQUEST): Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control Isdpoynmylefx Abvjtg IMPORTANT POINTS FOR CONE BENDING: The max. plate thickness is 50% of the rated capacity The cone length must be max. 30% or more than 60% of the roll length Hardened rolls are recommended

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €40,900 Leasing rate: €781.19 Bending length: 2050 mm Max. bending capacity - mild steel: 10 mm Max. plate thickness without pre-bending at D = 5x top roll: 10 mm Max. plate thickness without pre-bending at D = 1.5x top roll: 8 mm Max. plate thickness with pre-bending at D = 5x top roll: 8 mm Max. plate thickness with pre-bending at D = 1.5x top roll: 6 mm Top roll diameter: 200 - 220 mm Bottom roll diameter: 200 - 220 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor output: 5.5 kW Length: 4400 mm Width: 1150 mm Height: 1250 mm Weight: 3950 kg 4 rolls Top roll driven by hydraulic motor and planetary gearbox, bottom roll driven by gear and cardan shaft Hydraulic adjustment of bottom and side rolls Digital display for bottom and side roll positions Hardened rolls Cone bending device Hydraulic release of the top roll Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control console Equipment compliant with CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL ROLLING: The maximum sheet thickness is 50% of the nominal capacity The cone length can be max. 30% or must be more than 60% of the roll length Hardened rolls are recommended Itodpsynmyfjfx Abvog

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €43,550 Leasing rate: €831.81 Bending length: 1,550 mm Max. bending capacity – mild steel: 12 mm Max. sheet thickness without pre-bending at D=5x top roll: 12 mm Max. sheet thickness without pre-bending at D=1.5x top roll: 10 mm Max. sheet thickness with pre-bending at D=5x top roll: 10 mm Max. sheet thickness with pre-bending at D=1.5x top roll: 8 mm Isdeynmx Iepfx Abvstg Top roll diameter: 220 mm Lower roll diameter: 200 mm Side roll diameter: 160 mm Rolling speed: 1.5 / 6 m/min Motor power: 5.5 kW Length: 3,900 mm Width: 1,150 mm Height: 1,250 mm Weight: 3,600 kg 4 rolls Top roll driven by hydromotor and planetary gearbox, lower roll driven by gear and cardan shaft Hydraulic adjustment of lower and side rolls Digital display for lower and side roll positions Hardened rolls Cone bending device Hydraulic top roll unloading Hydraulic drop-end bearing 2 working speeds Overload protection Mobile control panel Equipment according to CE regulations OPTIONS: Infinitely variable rolling speed Hydraulic side support Hydraulic top support NC control IMPORTANT POINTS FOR CONICAL BENDING: The max. sheet thickness is 50% of rated capacity The cone length must be max. 30% or more than 60% of roll length Hardened rolls are recommended

Būklė: naujas, Būklė: nauja Pristatymo laikas: apie 12 savaičių nuo užsakymo Kilmės šalis: Turkija Kaina: 22 300 € Lizingo įmoka: 428,16 € Lenkimo ilgis: 1550 mm Didžiausia lenkimo galia - konstrukcinis plienas: 4,5 mm Maksimalus lakšto storis be užlenkimo - konstrukcinis plienas: 4,5 mm Maksimalus lakšto storis su užlenkimu - konstrukcinis plienas: 3,5 mm Maksimalus lakšto storis be užlenkimo, kai D=5x viršutinis volas: 4,5 mm Maksimalus lakšto storis be užlenkimo, kai D=1,5x viršutinis volas: 3,5 mm Maksimalus lakšto storis su užlenkimu, kai D=5x viršutiniai volai: 3,5 mm Maksimalus lakšto storis su užlenkimu, kai D=1,5x viršutinis volas: 2,5 mm Viršutinio valo skersmuo: 130 mm Apatinio valo skersmuo: 130 mm Šoninio valo skersmuo: 130 mm Valcavimo greitis: 5 m/min Ilgis: 3300 mm Plotis: 1150 mm Aukštis: 1110 mm Svoris: 2370 kg Varomasis valcų pavara Viršutinis ir apatinis volai varomi Hidraulinis šoninių valcų padavimas 3 skaitmeniniai ekranai Hidrauliniai atlenkiami guoliai Grūdinti volai Itjdpeynmwdefx Abvog Kūginio lenkimo įrenginys Eksploatacijos instrukcija vokiečių arba anglų kalba PASIRINKTINAI: Viršutinis palaikymas Šoninis palaikymas Kintamas greitis NC valdymas

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2020, Techniniai duomenys: Darbinis plotis: 2050 mm Maks. lenkimo galia, paprastas plienas St40: 6,0 mm Maks. užlenkimas, paprastas plienas St40: 4,0 mm Viršutinio volo skersmuo: 170 mm Šoninių apatinių volų skersmuo: 170 mm Vidurinio apatinio volo skersmuo: 145 mm Kūginio lenkimo įtaisas Grūdinti volai Darbo aukštis: 800 mm Mobilus valdymo pultas Hidrauliniai pasukami laikikliai CE žymėjimas Variklio galia: 2,5 kW Matmenys (ilgis x plotis x aukštis): apie 3600 x 1200 x 1200 mm Svoris: apie 3 tonos Būklė: Labai gera, beveik kaip nauja, labai mažai naudota Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašina pagal išvaizdą, techninę būklę ir nusidėvėjimą atitinka savo amžių; naudotos mašinos parduodamos be jokios garantijos. Itedpfxeyzc Iae Abvjg

Būklė: naudotas, Gamybos metai: 1979, Roundo lakštų/vamzdžių valcavimo staklės. Iedpfx Abeyvqc Ujvetg Pastaraisiais metais jos daugiausia buvo naudojamos dūmtraukių, kurių skersmuo 150–160 mm, valcavimui. Pridedamos keturios padėklai su volais, kurie skirti vamzdžio skersmeniui nustatyti. Naudojant pneumatinį cilindrą, galas atidaromas, kad būtų galima išimti suvyniotą vamzdį. Išbandžiau stakles, tačiau volai nesisuka. Tikėtina, kad sprendimas yra nesudėtingas. Staklės su volais sveria apie 3–4 tonas.

Būklė: naudotas, Gamybos metai: 1997, Techninės detalės: Lakšto plotis: 3050 mm Lakšto storis: 16 mm Lenkimas: 12 Stovų plotis: 5200 mm Viršutinio volo skersmuo: 330 mm Apatinio volo skersmuo: 360 mm Bendras energijos poreikis: 15 kW Iodpfx Absyh D Nnjvjtg Mašinos svoris apie: 18,0 t Mašinos matmenys (IxPxA): 5,3 x 2,4 x 2,0 m Kūginių segmentų gamyba / kūginis lenkimas Kūginio lakšto lenkimo metu galima apdoroti iki 70% lakšto storio, palyginti su apvalaus lakšto valcavimu Kūginio lakšto valcavimo metu galima apdoroti maksimalų maždaug 8 mm storio lakštą

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 2 100 mm, Z ašies eigos atstumas: 1 300 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 30 m/min, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 36 aps./min, stalo ilgis: 4 000 mm, stalo plotis: 1 500 mm, bakelio talpa: 500 l, SHW PowerSpeed 5 Travel distances • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle): 1,300 mm Control system • CNC control: Heidenhain iTNC 530 Feed rate • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head, orthogonal design • Swivel range milling head holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Temporary: 36 – 6,000 rpm Automatic tool changer • Tool magazine for 48 tools Clamping table • Clamping surface: 4,000 x 1,500 mm Chip conveyor • Fork length: 4,000 mm Itjdpfsw I Rz Hox Abveg Coolant system • Tank capacity: 500 l Splash and chip guard • On one side, with 2 manually movable sliding doors About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare parts supply, on-site service, machine overhauls, and CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control system upgrades ----- _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - cnc milling machine used - vertical/horizontal milling machine used - milling machine for metal used - metal milling machine used - CNC milling machine used - CNC milling machines - milling machine - large workpiece machining - CNC large part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Būklė: naudotas, Gamybos metai: 1989, Schäfer SVRM 3500/12 - CNC 4 volų lakštų valcavimo staklės - Siemens CNC valdymas su valdymo svirtimi volų pozicionavimui ir skaitmeniniu indikatoriumi (atnaujintas 2006 m.) - Hidraulinis viršutinio volo pakreipimas per valdymo pultą - Volai pagaminti iš grūdinto plieno, stiprumas 900 N/mm² - Pagaminimo metai: 1989 Techniniai duomenys: - Maks. lakšto plotis: 3500 mm Iedpjylyh Dsfx Abvjtg - Volų darbinis ilgis: 3550 mm - Maks. lakšto storis lenkimui: 12 mm - Maks. lakšto storis ankštam lenkimui 4xS/3xS: 8 / 6 mm - Maks. lakšto takumo riba prie 20% šaltos deformacijos: 380 N/mm² - Viršutinio ir apatinio volų skersmuo: 360 mm - Šoninių volų skersmuo: 290 mm - Mažiausias įmanomas lenkimo spindulys: 220 mm - Apatinio volo padavimo greitis: 200 mm/min - Šoninių volų padavimo greitis: 700 mm/min - Bendra įdiegta galia: 22 kW - Elektros valdymas: 380 V / 50 Hz / 3 fazės - Užimamas plotas su valdymu, hidraulika ir volų takeliu (plotis x aukštis x ilgis): apie 7900 x 3300 x 4600 mm - Po grindimis: 900 mm - Mašinos svoris: 21100 kg

Būklė: geras (naudotas), Suspaudimo galvutė, spaudimo veržlė, spaudimo įvorės, spaudimo įvorė, įrankio tvirtinimas, įrankio laikiklis, frezavimo tvirtinimas, frezavimo įrankis, spaudimo įvorės - Spaudimo įvorės: Ø23 x 33 mm, 81 vnt. - Dydžiai: Ø 4/5/6/8/10/12 mm, žr. nuotraukas / dalių sąrašą Itjdpfxsyknlhj Abvjg - Kaina/pardavimas: tik pilnas komplektas - Transportavimo matmenys: 555/205/H190 mm - Svoris: 15,2 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, mašinos/transporto priemonės numeris: P 710, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), alyvos bako talpa: 120 l, bendras svoris: 6 500 kg, valdymo tipas: CNC valdymas, Machine is in like-new condition. The High Quality Press Brake (HQPB) is the top model amongst Placke press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet construction, takes place in-house. By utilising state-of-the-art technology combined with years of experience in metal forming, the HQPB series enables bending operations at the highest standard. Even the basic version, supplied as standard, is a fully functional press brake. This package of safety, reliability, and efficiency, together with straightforward operation, allows us to meet the highest requirements for precision in the bending process. Machine body: - Base machine, constructed from S 355 N steel - Side frames welded with 2 pressure pipes and top-mounted oil tank - Above-floor design - Coating (2-component structural paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper beam: - Press beam stress-relieved annealed - Immersion depth measurement, reading head guided via ball bearing guide - Separate Y1 and Y2 control, electrical tilt monitoring Hydraulic system: - Hydraulic proportional control valve system with electronically monitored cylinder synchronisation - Solid steel cylinders with inductively hardened piston rods - Low-noise internal gear pump Ram clamping: - Upper tool adapter system WILA, hydraulic clamping system, type NSCL-II-HC, fully hardened, Max. load: head-bearing = 250 t/m, shoulder-bearing = 300 t/m Lower beam: - Narrow table incl. manual clamping bar, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. The use of a mechanical crowning system for deflection compensation is not required by design. - Single-V die holder (13x20) - Working height: 1050 mm → with 55 mm tool height Front of the machine: 2 aluminium support arms at the front, approx. 600 mm long, incl. 2 tilting stops, measuring tape, and plastic wear strip. The support arms are moveable on a recirculating ball guide and can be height-adjusted via a slotted hole from 55 mm up to 100 mm die height. The ball guide is milled into the lower beam. Control and regulation technology: - Operating voltage 400V / 3Ph / 50Hz - Switchgear and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis controlled”: - X and R axes CNC-controlled - Z axis manual Delem DA 66 Touch control on swivel arm. Safety equipment in accordance with CE standards Technical data and working area: Bending force 600 kN Working length 1550 mm Clearance between frames 1200 mm Installation height 400 mm Throat depth 255 mm Ram stroke 215 mm Ram speeds: Rapid approach max. 280 mm/s Working speed max. 9.8 mm/s Itedpfoyvzkiex Abveg Return speed max. 170 mm/s Ram positioning accuracy ± 0.01 mm Ram tilt ± 10 mm Electrically limited to ± 5 mm Height of lower beam above floor 947 mm Motor power 5.5 kW Main dimensions: Pit depth 0 mm Side frame foundation depth 0 mm Machine weight approx. 6.5 t Tank capacity (hydraulic oil) 120 l (Specifications subject to change) Machine rear lighting: Work area lighting by LED strip between the uprights.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Sheet width 2600 mm Sheet thickness 10.0 mm steel Pre-bending 8.0 mm steel Top roll diameter approx. 220 mm Side roll diameter approx. 170 mm Lower roll diameter approx. 190 mm Control conventional Oil capacity 80.0 liters Voltage 380 V Total connected load 5.5 kW Weight approx. 5000 kg Dimensions (machine only) approx. 3500 x 1550 x 1400 mm Very good condition (!!) Current new price incl. accessories approx. €120,000 Special price on request Features: - Robust electro-hydraulic 4-roll plate bending machine - 4-roll concept allows for versatile bending and rolling options - Swiveling control unit * Operation and control of all rolls and machine axes * Digital position display for side rolls * Manual operation via joysticks Itodpfx Absylpz Hjvog - Two central rolls are directly driven by hydraulic motors - Conical rolling possible by tilting the rolls - Parallelism of the side rolls via torsion shafts - Double-sided pre-bending - Diameters up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a strength of 53–55 HRC - Low-maintenance, sturdy machine design - Continuous lubrication for all bearings - Rigid welded steel construction - Electro-hydraulic drop end for easy tube removal - Manometer / pressure gauge for the rolls - Safety device (safety rope with switch unit) - Operating manual * Special accessories included: - ROCCI height-adjustable center support * For large pipe diameters - ROCCI motorized material feed table * Motorized sheet feed + material support table

Gamybos metai: 2026, būklė: naujas, Fleksible Abcoilanlagen zum Schneiden nach Maß für Standard- und mittlere Produktionsanforderungen – mit individuell anpassbaren Kapazitäts- und Breitenoptionen. Bosporas Machinery ist ein Hersteller von Coilbearbeitungslinien und liefert weltweit leistungsstarke und kundenspezifische Industrielösungen. Unsere Standard- und mittleren Abcoillinien zum Schneiden nach Maß sind für die präzise Herstellung von Zuschnitten aus Blechcoils konzipiert und garantieren zuverlässige Performance, stabile Laufzeiten und flexible Konfigurationen. Diese Systeme sind ideal für Hersteller, die effiziente Lösungen für das Verarbeiten von mittelstarken Blechen suchen. Die Anlagen sind in unterschiedlichen Kapazitäten und Arbeitsbereichen verfügbar und können kundenspezifisch angepasst werden – entsprechend den Produktionszielen, Materialanforderungen und Hallenlayouts des Kunden. Ob für Neuinvestitionen oder zur Produktionsmodernisierung: Bosporas liefert komplette schlüsselfertige Abcoil- und Längsteilanlagen mit internationaler Projekterfahrung. ⚙️ VERFÜGBARE KONFIGURATIONEN 2 mm | 1300 mm | 4 Tonnen Abcoilanlage zum Schneiden nach Maß 3 mm | 1500 mm | 15 Tonnen Abcoilanlage zum Schneiden nach Maß Sonderkapazitäten, -breiten und -dicken sind auf Anfrage erhältlich. 📊 TECHNISCHER BEREICH Itjdjy Dug Hspfx Abvjg Materialstärke: 2 – 3 mm Coilbreite: 1300 - 1500 mm Coilgewicht: 4 – 15 Tonnen Hochpräziser Zuschnitt auf Länge Stabile Dauerlaufleistung der Anlage 🔧 HAUPTKOMPONENTEN DER ANLAGE Die Linie kann – je nach Projektanforderung – folgende Baugruppen beinhalten: Hydraulischer oder mechanischer Abwickler Richt- / Ebener Servovorschubsystem Guillotinenschere / Rotationsschere / Hydraulische Schere / Exzentermechanische Schere Förderbandsysteme Automatisches Abstapelsystem Ablagetisch SPS- & HMI-Steuerungssystem ⚙️ KONSTRUKTIONSMERKMALE Hohe Schnittgenauigkeit & Wiederholbarkeit Stabile Blechplanlage Schwere Industrieausführung Servogesteuerte Vorschubsysteme Benutzerfreundliche Automatisierung Modulares Anlagendesign für spätere Erweiterungen Für industriellen Dauerbetrieb ausgelegt ⚡ BETRIEBLICHE VORTEILE Flexible Produktion verschiedener Blechformate Konstant hohe Schnittqualität Reduzierter Personal- und Handlingsaufwand Effiziente Materialverarbeitung Schlüsselfertige Projektlösungen Kurze Lieferzeiten im Vergleich zu europäischen Herstellern 🏭 EINSATZGEBIETE Stahl-Service-Center Blechhändler Herstellung von Baumaterialien Hersteller von Klima- und Lüftungstechnik (HVAC) Weiße-Ware-Industrie Allgemeine Blechverarbeitungsbetriebe 📸 REFERENZPROJEKTE Die in diesem Inserat gezeigten Bilder zeigen Referenzanlagen ähnlicher Abcoillinien, die erfolgreich in verschiedenen Ländern gefertigt und in Betrieb genommen wurden. Diese Referenzen belegen unsere nachgewiesene Engineering-Kompetenz und internationale Projekterfahrung. Weitere Referenzen, Layoutzeichnungen und technische Detailinformationen stellen wir Ihnen auf Anfrage gerne zur Verfügung.

Gamybos metai: 2026, būklė: naujas, Sunkiems lakštiniams metalams skirta aukštos tikslumo ritinių pjaustymo linija, užtikrinanti stabilią gamybą ir pramoninės klasės našumą. „Bosporas Machinery“ – lakštinio metalo apdirbimo linijų gamintoja, tiekianti aukštos našumo ir individualiai pritaikytus pramoninius sprendimus visame pasaulyje. Ši sunkaus tipo ritinių pjaustymo linija sukurta tiksliai apdirbti storagabaritę medžiagą reikliose pramoninėse srityse. Linija suprojektuota stabiliai veikti, užtikrintai ir tiksliai pjaustyti bei tęstinei gamybai. Idealiai tinka įmonėms, kurioms svarbus patikimumas, didelė našumo apimtis ir efektyvus ritinių apdorojimas. Linija siūlo pilną, raktų atidavimui paruoštą sprendimą – nuo ritinio pakrovimo, atvyniojimo, pjaustymo iki vėl suvyniojimo ir galutinio ritinio iškrovimo. ⚙️ TECHNINĖS CHARAKTERISTIKOS Medžiagos storis: 3 arba 4 mm Ritinio plotis: iki 1500 mm Ritinio svoris: iki 15 tonų Aukšto tikslumo pjovimo efektyvumas Sunkioms darbo sąlygoms pritaikyta nenutrūkstama eksploatacija 🔧 PAGRINDINIAI LINIJOS MODULIAI Hidraulinis ritinio užkrovimo vežimėlis Hidraulinis ritinio atvyniotuvas (15 t) Itjdjy Dtxnepfx Abvjg Įvadaštrintuvas / spaudimo ritinėlių sistema Pjovimo galva su precizišku peilių reguliavimu Atliekų vyniojimo sistema Tempimo bei separatorius mazgas Hidraulinis pervyniotuvas Hidraulinis ritinio iškrovimo vežimėlis PLC ir HMI automatikos sistema ⚙️ INŽINERINIAI PRIVALUMAI Tvirta ir sunkiems darbams skirta konstrukcija Preciziška pjovimo galva su smulkiu peilių pozicionavimu Stabili padavimo ir tempimo kontrolės sistema Patikimas pervyniojimo veikimas Servopavarų valdomos automatinės sistemos Intuityvi operatoriaus sąsaja Sukurta ilgalaikei pramoninei eksploatacijai ⚡ DARBO PRIVALUMAI Optimalu storoms ir sunkioms medžiagoms Didelis gamybos efektyvumas Pastovi ir pakartojama pjovimo kokybė Mažiau prastovų ir techninės priežiūros Sprendimas „iki rakto“ Trumpesnis pristatymo terminas, lyginant su Europos gamintojais 🏭 TAIKYMO SRITYS Metalo serviso centrai Sunkių lakštų apdirbimo įmonės Statybinių medžiagų gamintojai Automobilių pramonės tiekėjai Pramoninių plieno komponentų gamyba 📸 REFERENCIJOS IR PROJEKTAI Skelbime pateiktose nuotraukose matote sėkmingai įdiegtų panašių pjaustymo linijų pavyzdžius įvairiose šalyse. Šios nuorodos atspindi mūsų patikrintas inžinerines galimybes ir tarptautinę projektų patirtį. Papildomai galime pateikti daugiau referencijų, išdėstymo brėžinių ir techninių detalių pagal užklausą.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Lakštų plotis 1550 mm Lakštų storis 6,5 mm Lenkimo spindulys 4,5 mm Viršutinio volo skersmuo 150 mm Itjdpfx Aboxabkbovsg Šoninio volo skersmuo 130 mm Apatinio volo skersmuo 150 mm Didžiausias atstumas tarp viršutinio ir apatinio volo 20,0 mm Bendras energijos poreikis 2,2 + 1,5 kW Staklių svoris apie 2370 kg. Matmenys (I x P x A) 3300 x 1150 x 1110 mm Demonstracinė staklė – NAUJA Nenaudota (!!) Speciali kaina pagal užklausą Įranga: - Elektrohidraulinė 4 volų lakštų lankstymo staklė * su varomais viršutiniu ir apatiniu volais * tvirta suvirinta konstrukcija - Pritaikymo sritis: * nuo lengvos iki sunkios lakštų apdirbimo (plienas/ALU/nerūdijantis plienas) - Apatinio ir šoninių volų elektrohidraulinis reguliavimas - Šoninių volų linijinis vedimas - Viršutinis volas varomas galingu elektros varikliu ir planetine pavara - Laisvai judantis atskiras valdymo pultas - Grūdinti volai SAE 1050 (CK 45), su išgaubimu - Kūginio lankstymo įtaisas - 3 ašių skaitmeninis indikatorius tiksliam volų padėties nustatymui - Elektrohidraulinis atverčiamas guolis - Naudojimo instrukcija (PDF)

Būklė: naudotas, - Būklė: Naudota Ijdpfx Ajwxynlobvetg - Matmenys: 1216x850x2200 mm - Serijos Nr.: 101293/A - Modelis: ECNB1042E - Lentynos: 600x400 mm - Temperatūra: 18°-22°C - 4 durys - Šaltnešis: R404A - Galia: 1,4 kW - Įtampa: 22V - Svoris: 245 kg - Atnaujinta įranga: Įranga paruošiama pagal užsakymą; atsiėmimo ir grąžinimo terminai nustatomi susitarus (kaina nurodoma po atnaujinimo pagal užklausą).

Būklė: naujas, Sheet thickness: 10 mm Ijdpfxjd Ab Rye Abvotg Bending length: 4100 mm Top roll diameter: 330 mm Technical Data: - Hardened and polished rolls - Full body made from ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic feeding - Top and bottom rolls driven by hydraulics and gearbox - Vertical movement of the lower roll hydraulically powered - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EUR 4,681 - Material feed table: EUR 3,400 - Oil cooler: EUR 1,040 - Central support: EUR 13,600 - Side supports: EUR 10,250 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!