Maf Ws2-St500 pirkti naudotą (386)

Būklė: naudotas, Caractéristiques techniques : LONGUEUR : 3 600 mm Bdedpfo Dvlljx Akuod

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 961 kN, Nėra minimalios kainos – garantuotas pardavimas didžiausią kainą pasiūliusiam! TECHNINĖS SPECIFIKACIJOS Uždarymo jėga: 200 t Kolonų atstumas: 560 x 560 mm Sraigto skersmuo (pirmas komponentas): 60 mm Sraigto skersmuo (antras komponentas): 35 mm Įpurškimo svoris (pirmas komponentas): 566 g Bsdpfx Akjy Exdljujdd Įpurškimo svoris (antras komponentas): 178 g ĮRANGA Dvikomponentė sistema Kraussmaffei Multinject sistema Pastaba: Perkant kelis gaminius iš tos pačios vietos (žr. pasiūlymus žemiau), bus taikomos mažesnės demontavimo ir pakrovimo išlaidos.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight opening: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection throughput: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) Bedpfxjyv E Nvo Akuedd 👉 Plasticising System: - Version for thermoplastics with abrasion protection - Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is a very good candidate for ESS retrofit (energy savings up to 30–60%) 📐 Dimensions and weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Krauss Maffei KM 160–1000 CX liejimo mašina 🔹 Pagrindinė informacija Gamintojas: Krauss Maffei Modelis: KM 160–1000 CX Pagaminimo metai: 2012 Darbo valandos: 57 654 moto valandos Kategorija: Hidraulinė liejimo mašina 🔧 Uždarymo agregatas Uždarymo jėga: 1600 kN (160 t) Plokščių matmenys: 820 × 845 mm Kolonų atstumas: 520 × 520 mm Minimali formos aukštis: 300 mm Maksimalus atidarymo eiga: 950 mm 💉 Liejimo agregatas Sraigto diametras: 50 mm Liejimo tūris: 432 cm³ Liejimo svoris: 393 g Liejimo slėgis: 2304 bar ⚡ Elektrohidraulinė sistema Siurblio variklio galia: 37 kW Bdjdpfeyv E E Djx Akuod Šildytuvų galia: 18,7 kW 👉 Galimybė įdiegti energiją taupančią sistemą (ESS) – realus energijos sąnaudų mažinimas net iki 30–60% 📐 Matmenys ir svoris Įrenginio svoris: 9 t Matmenys (ilgis × plotis × aukštis): 5,54 × 2,06 × 2,18 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Liejimo mašina: Krauss Maffei KM 800-5000 MC Pagaminimo metai: 2001 Darbo valandų skaičius: 70 000 h Konfigūracija: Mašina su robotu, apsaugine tvora ir transporteriu Prieinamumas: Galimos dvi identiškos mašinos Uždarymo sistema: Uždarymo jėga: 8 000 kN Maksimali formos atidarymo jėga: 356 kN Judamos plokštės (atidarant) jėga: 98 kN Judamos plokštės (uždarant) jėga: 92 kN Bdjdexqh I Iepfx Akued Formos plokštės matmenys (Aukštis x Plotis): 1 610 mm x 1 530 mm Atstumas tarp kolonų (Aukštis x Plotis): 1 120 mm x 1 000 mm Formos atidarymo eiga: 1 400 mm Minimalaus formos aukštis: 600 mm Maksimalus formos atidarymas: 2 000 mm Hidraulinio išstūmiklio eiga: 250 mm Liejimo skyrius: Sraigto skersmuo: 90 mm L/D santykis: 23 Liejimo slėgis: 1 742 bar Liejimo tūris: 2 863 cm³ Liejimo masė (PS): 2 605 g Matmenys ir svoris: Mašinos matmenys (Ilgis x Plotis x Aukštis): 10,5 x 2,86 x 2,89 m Svoris: 43 tonos

Būklė: naudotas, Motor, 1FK7060-5AF71-1DU5-Z, 4 Stück verfügbar. Motor, 1FK7100-5AF71-1AG0, 2 Stück verfügbar. Motor, 1FW3204-1GN72-5CK0-Z, 1 Stück verfügbar. Motor, 1FW3204-1GY72-5CK4-Z, 1 Stück verfügbar. Motor, 1FW3204-7GN01-4GY7-Z, 2 Stück verfügbar. Display, 2 Stück verfügbar. Siemens Netzfilter für 120 kW Act, 6SL3000-0BE31-2AA0, 1 Stück verfügbar. Siemens Simodrive Antrieb, 6SN1111-0AA00-1FA0, 1 Stück verfügbar. Siemens Einzelmotor-Modul, 6SL3126-1TE32-0AA0, 3 Stück verfügbar. Siemens Einzelmotor-Modul, 6SL3126-1TE31-3AA3, 1 Stück verfügbar. Bdedporbzx Rofx Akujd Siemens Doppel-Motor-Modul, 6SL3126-2TE21-0AA0, 2 Stück verfügbar. Siemens Active Line Module, 6SL3136-7TE31-2AA1, 2 Stück verfügbar. Siemens Sinamics Sensor-Modul SMC20, 6SL3055-0AA00-5BA1, 6 Stück verfügbar. Siemens Motor-Modul, 6SL-3126-1TE31-3AA0, 1 Stück verfügbar. Siemens Motor-Modul, 6SL-3126-1TE32-0AA4, 1 Stück verfügbar. Siemens Motor-Modul, 6SL-3126-1TE21-8AA0, 2 Stück verfügbar. Siemens Steuergerät, 6SL-3040-0MA00-0AA1, 2 Stück verfügbar. Siemens Simodrive Antrieb, 6SN1111-0AA00-1FA0, 1 Stück verfügbar. Mainboard

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, KRAUSS MAFFEI KM 420-2000 CX Injection Moulding Machine Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticising Unit Complete plasticising unit designed for processing thermoplastics. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar spacing (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection throughput: 368 cm³/s Screw speed: 285 rpm Plasticising rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Pump motor rated power: 75 kW Installed heater power: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the motor speed to the actual demand during each production cycle. Key Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - Worldwide quality and proven industrial technology - Reduced energy losses during idle running Bedeyugkwopfx Akujdd - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Retrofit possible on existing hydraulic injection moulding machines

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, KRAUSS MAFFEI Injection Molding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color display integrated with the operator console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, with abrasion protection. Clamping Unit - Clamping force: 11,000 kN - Mold opening force: 770 kN - Platen dimensions (horizontal × vertical): 2210 × 1910 mm - Tie-bar spacing (horizontal × vertical): 1550 × 1250 mm - Mold opening stroke: 2000 mm - Minimum mold height: 600 mm - Maximum mold height: 1200 mm - Platen stroke: 2600 mm - Ejector stroke: 300 mm - Ejector force: 220 / 110 kN Injection Unit - Screw diameter: 120 mm - Maximum injection pressure: 1758 bar - Injection volume: 6786 cm³ - Shot weight (PS): 6175 g - Screw speed (standard / option): 103 / 145 rpm - Injection rate (standard): 1118 cm³/s - Injection rate (accumulator): 1696 cm³/s Electrical & Hydraulic Equipment - Rated pump motor power: 132 kW - Installed heater power: 82 kW Bsdpoyugfzefx Akuodd - Number of cylinder heating zones: 7 - Number of dry cycles (EUROMAP): 802 cycles/h - Hydraulic oil tank capacity: 2440 l Machine Dimensions & Weight - Net weight (incl. control cabinet): 73 t - Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional Energy Saving System ESS (Energy Saving Systems) The machine can be fitted with a state-of-the-art ESS servo drive system, significantly increasing the energy efficiency of hydraulic injection molding machines. The system regulates the operation of the hydraulic pump motor using a frequency inverter, adjusting the motor speed according to current demand during the production cycle. Main Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - World-class quality and proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of the motor and hydraulic components - Possibility to retrofit existing hydraulic injection molding machines The ESS system allows for significant reduction of the machine’s operating costs while maintaining full production parameters.

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Garinė plovykla – MAFO HOWDEN Gamintojas: MAFO HOWDEN B.V. Pagaminimo metai: 1998 Serijos numeris: 8981-594/1 Plovyklos matmenys: 4800 × 1300 × 2200 mm Bdodpfxexb D T Is Akusd Pritaikyta E2 dėžių (60×40 cm) plovimui Bėgeliai (konteinerių vedliai): Plovimo plotis: 900 mm Plovimo aukštis: 1200 mm

Gamybos metai: 2016, būklė: beveik kaip naujas (parodų įrenginys),

Būklė: naudotas, Gamybos metai: 2004, Technical Details: Screw diameter: 105 mm Injection weight in polystyrene: 4,727 g/PS Clamping force: 2,300 kN Platen size: 2,830 x 2,400 mm Opening stroke: 3,700 mm Mold installation height: 1,100–1,800 mm Shot volume: 5,195 cm³ Max. injection pressure: 2,296 bar Dimensions: 14.2 x 4.15 x 2.84 m Total weight: 143 t Tie bar spacing: 2,000 x 1,600 mm Robot system, core pulls, hot runner controller -    The machine is in very good condition -    Complete additional cutting units available -    Comes with a conveyor belt and robot systems (model 2012) Bdodjtrbcbopfx Akuod

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Krauss Maffei KM 1300-12000 MX Injection Moulding Machine Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 Machine designed for thermoplastics processing, equipped with a complete plasticizing unit featuring abrasion-resistant protection. Technical Data Clamping Unit Clamping force: 13,000 kN Mold opening force: 910 kN Platen dimensions: 2210 × 1910 mm Tie bar spacing: 1570 × 1270 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection Unit Screw diameter: 105 mm Injection pressure: 2296 bar Shot volume: 5195 cm³ Shot weight for PS: 4728 g Injection rate: 856 cm³/s Plasticizing Parameters Screw speed: 103 / 145 rpm Plasticizing rate (PS): - standard speed: 122 g/s - increased speed (option): 171 g/s Electro-Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 71 kW Number of barrel heating zones: 7 Bdjdpfeyrrwkox Akusd Dry cycle time per Euromap 6: 765 cycles/h Oil tank capacity: 2440 l Dimensions and Weight Net weight with control cabinet: 70 t Installation dimensions: 13.03 × 3.65 × 2.82 m

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 69 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 250 kN, varžto skersmuo: 45 mm, Parduodama KraussMaffei KM 125-700C2 markės liejimo mašina. Mašina yra visiškai veikianti ir buvo naudojama gamyboje iki pat paskutinių dienų. Techniniai duomenys: Pagaminimo metai: 2000 Bdsdpfex Ituqox Akuod Darbo valandos: 69 000 h Uždarymo jėga: 125 t Cilindro skersmuo: 45 mm Adatinis vožtuvas: pneumatinis Branduolio traukimas: 2x hidraulinis Vidinio slėgio jutiklis

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 1 000 mm, įpurškimo slėgis: 1 742 juosta, atvērimo eiga: 2 000 mm, TECHNINĖS DETALĖS Sandarumo jėga: 8 000 kN Maksimali įrankio atidarymo jėga: 356 kN Bdodjxup Nnspfx Akujd Judančios atidarymo plokštės padavimo jėga: 98 kN Judančios uždarymo plokštės jėga: 92 kN Plokštės dydis (A x P): 1 610 mm x 1 530 mm Stulpelių tarpai (A x P): 1 120 mm x 1 000 mm Įrankio atidarymo eiga: 1 400 mm Minimali įrankio aukštis: 600 mm Didžiausias atidarymas: 2 000 mm Hidraulinio išstūmėjo eiga: 250 mm Sraigto diametras: 90 mm L/D santykis: 23 Įpurškimo slėgis: 1 742 bar Įpurškimo tūris: 2 863 cm³ Šūvio svoris (PS): 2 605 g MAŠINOS DETALĖS Išmatavimai ir svoris Išmatavimai (I x P x A): 10 500 x 2 860 x 2 890 mm Svoris: 43 000 kg Veikimo valandos: 70 000 h

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 9 500 kN, varžto skersmuo: 120 mm, išstūmimo eiga: 300 mm, atvērimo eiga: 1 900 mm, TECHNINĖS DETALĖS Uždarymo jėga: 9 500 kN Atidarymo jėga: 665 kN Stulpelių atstumas: 1 400 x 1 150 mm Tvirtinimo plokštės: 1 960 x 1 710 mm Atidarymo eiga: 1 900 mm Min. formos aukštis: 500 mm Maks. formos aukštis: 1 200 mm Maks. atidarymo plotis: 2 400 mm Išstūmimo eiga: 300 mm Aukštos našumo sraigtas HPS-UN, skersmuo: 120 mm Antgalio spindulys: 30 mm Antgalio anga: 12 mm Sraigto skersmuo: 120 mm Lietinio svoris (HDPE): 5 420 g Lietimo tūris: 7 634 cm³ Specifinis įpurškimo slėgis: 2 257 bar ĮRANGOS DUOMENYS Bjdsxup Sispfx Akuodd Matmenys ir svoris Matmenys (I x P x A): 12 770 x 3 420 x 2 750 mm Įrenginio svoris: 61,5 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control: MC4 with colour monitor, operator panel, and diskette station 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Bjdpfx Aksxak Ucjujdd Movable platen force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Mould opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles (according to Euromap): 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions and Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Krauss Maffei KM 80-380 CX liejimo mašina Gamybos metai: 2010 Uždarymo blokas Uždarymo jėga: 800 kN Tvirtinimo plokščių matmenys (A × P): 670 × 670 mm Atstumas tarp kolonų (A × P): 420 × 420 mm Formos aukštis (min./maks.): 250 mm Didžiausias atidarymas: 750 mm Įpurškimo blokas Sraigto skersmuo: 40 mm Bdjdpsxw Upfsfx Akuod Įpurškimo tūris: 201 cm³ Įpurškimo svoris (PS): 183 g Įpurškimo slėgis: 1860 bar Elektrohidraulinė įranga Siurblio variklio galia: 15 kW Šildytuvų galia: 10,9 kW Matmenys ir svoris Mašinos matmenys (ilgis × plotis × aukštis): 4,09 × 1,48 × 2,02 m Svoris (su valdymo spinta): 3,55 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Krauss Maffei KM 900 – 8100 GX Injection Moulding Machine Year of manufacture: 2015 General Description: Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions on the fixed platen and 4 adjusting units on the moving platen. The machine is equipped with an injection unit control system of the PV (proportional valve) type. Control operates via a modern MC6 system, based on an industrial PC with real-time Ethernet technology. The operator panel is an integrated 19-inch touchscreen with colour display, LED backlight, and full process visualization using ProcessDesigner. Plasticising Unit: Bdsdpfx Akewyxbgjusd Complete system for thermoplastics processing Abrasion-resistant (wear-protected) version Screw diameter: 105 mm Check valve and open nozzle Technical Data: Clamping Unit: Clamping force: 9000 kN Mould opening force (pressure cushions): 630 kN Platen dimensions (W x H): 1660 x 1530 mm Tie bar spacing: 1180 x 1000 mm Max. mould opening stroke: 1600 mm Mould height (min – max): 500 – 1100 mm Max. total opening stroke: 2100 mm Ejector stroke: 300 mm Ejector force (forward / return): 140 / 70 kN Injection Unit: Screw diameter: 105 mm L/D ratio: 23.0 Injection pressure: 1778 bar Injection volume: 4546 cm³ Shot weight (for PS): 3228 g Injection rate: 805 cm³/s Screw speed (standard): 150 rpm Nozzle contact force: 166 kN Electrical and Hydraulic Equipment: Pump motor power: 120 kW Heater power: 59 kW Number of heating zones (barrel): 7 Dry cycle time / stroke (Euromap 6): 3.3 s / 826 mm Dry cycle time / stroke (KM standard): 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and Weight: Net weight (incl. control cabinet): 40 tons Machine dimensions (L x W x H): 10.72 x 3.03 x 2.51 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 160–750 CX Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: Opening: 44.8 kN Closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Minimum mould height: 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / option): 390 / 490 rpm Electrical and Hydraulic Equipment Nominal pump motor power: 22 kW Bodpfx Akex Thzpjuodd Installed heating power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, INJECTION MOLDING MACHINE KRAUSS MAFFEI KM 300-1900 C1 Year of manufacture: 2007 Included: Wittmann W 731 robot General Description We offer a used injection molding machine from the renowned manufacturer Krauss Maffei, model KM 300-1900 C1, equipped with a Wittmann W 731 robot. The machine features a fully hydraulic clamping system as well as a modern MC4 control unit with color monitor, integrated operator panel, and disk drive station. Plasticizing Unit Complete plasticizing system for thermoplastics, equipped with wear-resistant protection, screw diameter 60 mm with non-return valve and open nozzle. Technical Data Clamping Unit Clamping force: 3000 kN Mold opening force: 160 kN Moving platen force: – Opening: 86 kN – Closing: 68 kN Platen dimensions (H x W): 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight between platens: 1150 mm Ejector stroke: 200 mm Ejector force: 58 / 28 kN Injection Unit Screw diameter: 60 mm Injection pressure: 2420 bar Injection volume: 769 cm³ Shot weight (PS): 700 g Screw speed (standard/option): 218 / 306 rpm Injection rate: 294 cm³/s Output at: – Standard speed: 55 g/s – Increased speed: 78 g/s Electrical-Hydraulic System Pump motor capacity: 55 kW Heater power: 30 kW Number of heating zones (cylinder): 6 Bdodpfxow Du Htj Akusd Dry cycles (Euromap): 1350 cycles/h Oil tank capacity: 720 l Dimensions and Weight Net weight incl. control cabinet: 14.2 t Overall dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 250 – 1900 C1 Year of manufacture: 2007 Control system: MC4 Operating hours only – 8,900!!!!! Clamping Unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Injection weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic Equipment: Pump motor power: 55 kW Installed heating capacity: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and Weight: Bsdpfx Aow A N Hfekuedd Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and Additional Equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface as per Euromap 67 Additional information: Machine is located in Poland Ready for collection Option to arrange loading, transport, installation, and commissioning

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control unit with colour monitor, integrated control panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Bjdsx Avhyjpfx Akuedd Clamping force: 1100 kN Mould opening force: 70 kN Movable platen traverse force: – opening: 35.4 kN – closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar clearance (h × v): 470 × 470 mm Mould opening stroke: 600 mm Mould installation height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Rated pump motor power: 22 kW Installed heater power: 15.62 kW Number of barrel heating zones: 5 Dry cycles according to Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping unit: Bsdpfoydbbvjx Akujdd Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (fwd/rev): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Shot volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Dosing unit colourant control 14 GK heating zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Bdedpfx Aew U Rcdekuod Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei KM 350-2700 C2+ Injection Moulding Machine Year of manufacture: 2004 System: Fully hydraulic Control system: MC4, colour monitor, integrated control panel, built-in disk drive 2. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasive protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen traverse force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Bdsdpjx Eluksfx Akuod Mould opening stroke: 920 mm Mould height installation: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard speed: 108 g/s Output at increased speed: 141 g/s Electro-hydraulic Equipment Pump motor power: 75 kW Installed heater power: 36 kW Number of cylinder heating zones: 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and Weight Net weight (with control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m