Isb-Natelberg Liejimo Manipuliatorius pirkti naudotą (1 820)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 160–750 CX Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: Opening: 44.8 kN Closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Minimum mould height: 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Dcsdpfxex Thzpe Akkek Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / option): 390 / 490 rpm Electrical and Hydraulic Equipment Nominal pump motor power: 22 kW Installed heating power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Injection Moulding Machine Krauss Maffei KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping Unit: Clamping force [kN]: 13,000 Platen dimensions (H x V) [mm]: 2210 x 1910 Tie-bar spacing (H x V) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Dedpfx Ajy Hqwyokksck Injection Unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight (PS) [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed (PS) [g/s]: 186 Electrical–Hydraulic Equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and Weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional Equipment: Parallel movements: Independent hydraulic drive for the screw Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on the moving platen, 1 on the fixed platen) Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Krauss Maffei Injection Moulding Machine KM 350-3000 CX Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch operator panel featuring a colour touchscreen, LED backlighting, and visualisation of all running processes (ProcessDesigner). Plasticising unit Complete plasticising unit for thermoplastics with wear-protection version, 80 mm screw diameter, fitted with a non-return valve and open nozzle. MACHINE TECHNICAL DATA – STANDARD VERSION Clamping unit - Clamping force: 3,500 kN - Opening force: 221 kN - Platen dimensions (h x v): 1,060 x 1,095 mm - Tie bar clearance (h x v): 710 x 710 mm - Max. mould opening stroke: 920 mm Dcjdpfxey Tp Rlj Akkek - Min. mould height: 380 mm - Max. daylight: 1,300 mm - Ejector stroke: 250 mm - Ejector force forward/backward: 95/49 kN Injection unit - Screw diameter: 80 mm - L/D ratio: 20.0 - Injection pressure: 1,855 bar - Injection volume: 1,608 cm³ - Shot weight: 1,464 g - Injection speed: 95 mm/s - Injection flow rate: 478 cm³/s - Standard screw rotation speed: 220 rpm - Plasticising rate: 109.5 g/s Electrical and hydraulic equipment - Pump motor rated power: 75 kW - Installed heater power: 36 kW - Number of barrel heating zones: 7 - Dry cycle time / stroke as per Euromap 6: 2.3 s / 497 mm - Oil tank capacity: 720 l Dimensions and weight - Net weight incl. control cabinet: 16.3 t - Machine dimensions (L x W x H): 7.21 x 2.17 x 2.25 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Arburg 320 C 400-170 liejimo mašina Pagaminimo metai: 2006 Uždarymo jėga: 40 t Sraigto skersmuo: 30 mm Dodpfx Aexwu R Njkkjck Atstumas tarp tvirtinimo strypų: 320 × 320 mm Maksimalus įpurškimo tūris: 85 cm³ Maksimalus įpurškimo svoris (PS): 77 g Įpurškimo slėgis: 2000 bar Maksimali sraigto greitis: 400 /min Antgalio eiga: 250 mm Antgalio kontakto slėgis: 40,6 kN Šildymo galia: 9,4 kW Siurblio pavaros galia: 11 kW Bendra įdiegta galia: apie 20,5 kW Mašinos ilgis: apie 3,4 m Mašinos plotis: apie 1,4 m Mašinos aukštis: apie 2,0 m Mašinos svoris: apie 2 400 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection unit – 5550 Screw diameter: 90 mm Specific injection pressure: 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with hardened edges – high wear and corrosion resistance Clamping unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 Heating zones GK: 3 x 8 = 24 zones Rotameters: 20 circuits Control system: CC 200 A02 Installed software: - Micrograph Plus - Microplast - QDP - PD Graphics II Dcodpsw U Sz Ijfx Akkek Robot ERC 63/1-F, RC 200 X axis: 1,300 mm Y axis: 1,800 mm Z axis: up to 2,840 mm C axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue pick-up

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, DEMAG Injection Moulding Machine System 1500/1500-16000 Year of manufacture: 2008 We offer for sale a high-quality injection moulding machine from the renowned German brand Demag, model System 1500/1500-16000, equipped with a robot and accessories. The machine is in very good technical condition, has been regularly serviced, is complete and ready for operation. TECHNICAL DATA Clamping unit: Clamping force: 15,000 kN Platen dimensions (W x H): 2,150 x 1,880 mm Clearance between tie bars (W x H): 1,500 x 1,250 mm Minimum / maximum mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection unit: Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (for PS): 9,880 g Injection pressure: 1,454 bar Electro-hydraulic system: Hydraulic motor power: 165 kW Heater power: 97 kW Dimensions and weight: Machine weight with control cabinet: 74,000 kg / 21,000 kg Overall dimensions (L x W x H): 14.4 m x 3.4 m x 2.9 m Additional equipment: Wittmann W 753 robot – year of manufacture 2008 Safety cage Conveyor belt (product transport) Dodpeww Idlefx Akksck The machine is ideal for processing large technical mouldings. Perfect for series production, with the possibility of full automation thanks to the installed robot and part removal system.

Būklė: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Djdpfetrya Rjx Akksck Weight and dimensions - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Būklė: geras (naudotas), Gamybos metai: 2001, Battenfeld TM 4500/2800 liejimo mašina Pagaminimo metai: 2001 Valdymas: Unilog B4 Yra 4 identiškos mašinos Uždarymo sistema: Uždarymo jėga: 4500 kN Minimalus formos aukštis: 425 mm Maksimalus formos aukštis: 770 mm Stulpų atstumas: 800 x 800 mm Montavimo plokščių matmenys: 1155 x 1195 mm Formos atidarymo eiga: 760 mm Liejimo blokas: Sraigto skersmuo: 75 mm Įpurškimo svoris (PS): 1506 g Įpurškimo tūris: 1657 cm³ Specifinis įpurškimo slėgis: 1739 bar Roboto sąsaja: Euromap 12 Dodpevn Sa Tefx Akkjck Mašinos matmenys: 8,3 x 1,9 x 2,4 m Svoris: 20400 kg Alyvos bako talpa: 800 litrų

Būklė: beveik kaip naujas (naudotas), Plasticizing unit Krauss Maffei CX machine Screw diameter: 50 mm Injection volume: 432 ccm Dodpfev R Ucpjx Akkeck Shot weight: 393 g Practically new – only used for toolroom trials

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Ejector stroke: 250 mm Ejector force (fwd/rev): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Shot volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Djdpjydbbvefx Akkjck Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Dosing unit colourant control 14 GK heating zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Krauss Maffei KM 1300-12000 MX Injection Moulding Machine Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 Machine designed for thermoplastics processing, equipped with a complete plasticizing unit featuring abrasion-resistant protection. Technical Data Clamping Unit Clamping force: 13,000 kN Mold opening force: 910 kN Platen dimensions: 2210 × 1910 mm Tie bar spacing: 1570 × 1270 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection Unit Screw diameter: 105 mm Injection pressure: 2296 bar Shot volume: 5195 cm³ Shot weight for PS: 4728 g Injection rate: 856 cm³/s Plasticizing Parameters Dsdpfoyrrwkox Akkjck Screw speed: 103 / 145 rpm Plasticizing rate (PS): - standard speed: 122 g/s - increased speed (option): 171 g/s Electro-Hydraulic Equipment Pump motor rated power: 132 kW Installed heater power: 71 kW Number of barrel heating zones: 7 Dry cycle time per Euromap 6: 765 cycles/h Oil tank capacity: 2440 l Dimensions and Weight Net weight with control cabinet: 70 t Installation dimensions: 13.03 × 3.65 × 2.82 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Details Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Dcodpeyugalsfx Akksk Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electro-hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and tube 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor by using a frequency inverter, which adjusts the motor speed according to the machine’s actual demand during the production cycle. This ensures that electrical energy is only consumed when actually needed. Main Benefits - Reduction of electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy loss during machine idle time - Lower heating of the hydraulic system - Increased service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system allows you to significantly reduce the operating costs of the machine while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Dcedeyv E Nvepfx Akkek Clamping force: 3500 kN (350 tons) Opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight opening: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection throughput: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising System: - Version for thermoplastics with abrasion protection - Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l 👉 The machine is a very good candidate for ESS retrofit (energy savings up to 30–60%) 📐 Dimensions and weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Machine: ENGEL DUO 5550/650 pico Control system: CC200 Year of manufacture: 2011 Operating hours: 61,606 h Robot: Viper 40 1. Clamping Unit Clamping force: 6,500 kN Tie bar spacing (H × V): 1,100 × 960 mm Platen dimensions (H × V): 1,510 × 1,440 mm Mould height (min./max.): 650 / 1,150 mm Mould opening stroke: 1,400 mm Max. distance between platens: 2,050 mm Max. mould weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Tie bar diameter: 175 mm 2. Injection Unit (5550 Unit) Screw diameter: 90 mm (reinforced for up to 30% fibre content) Max. injection volume: 2,740 cm³ Max. shot weight (PS): 2,520 g Injection pressure (max./boost): 2,180 bar Injection pressure (standard): 1,910 bar Screw L/D ratio: 20 Screw stroke: 430 mm Max. screw rotation speed: 148 rpm Plasticising capacity: 77 g/s Nozzle contact force: 150 kN 3. Drive and Power Supply Installed drive power: 90 kW Cylinder heater capacity: 56 kW Number of heating zones: 6 Hydraulic oil tank capacity: 1,000 l Dcodpfxeyw Aa Uj Akkek 4. Special Equipment and Hydraulics Core circuits: - 6 hydraulic circuits on the moving platen - 2 hydraulic circuits on the fixed platen Cascade valves: 4 pcs (mounted on fixed platen) 5. General Characteristics Two-platen machine (DUO series) designed for production of large-size plastic components. The construction ensures: - High rigidity of the clamping unit - Capability to work with heavy moulds and large opening stroke Additional Information: - Screw reinforced for up to 30% fibre content - All hydraulic hoses replaced in Q4 2024 - Machine condition: perfect, ready for production Machine available immediately, professionally maintained and ready for instant operation.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Batų injekcijos mašina Battenfeld HM 300/1330 Gamintojas: Battenfeld Mašinos tipas: HM 300/1330 Metai: 2011 Kategorija: Injekcinio liejimo mašinos Mašina labai geros techninės būklės, visiškai veikianti, paruošta nedelsiant dirbti. Puikiai tinka pramoninei gamybai, reikalaujančiai didelio našumo ir patikimumo. Uždarymo blokas Uždarymo jėga: 3000 kN Dcodpjxyqw Rsfx Akkok Tvirtinimo plokščių matmenys (aukštis × plotis): 1020 × 1030 mm Atstumas tarp kolonų (aukštis × plotis): 710 × 610 mm Minimalus / maksimalus formos aukštis: 375 mm Maksimalus atidarymo plotis: 1150 mm Injekcijos blokas Sraigto skersmuo: 55 mm Injekcijos tūris: 653 cm³ Injekcinio užpildo svoris: 600 g Injekcijos slėgis: 2040 bar Matmenys ir svoris Ilgis × plotis × aukštis: 12,2 m Mašiną galima apžiūrėti ir išbandyti pajungus prie elektros tinklo. Pagal pageidavimą galime atsiųsti nuotraukas ir vaizdo įrašus iš demonstracijų. Galima organizuoti pakrovimą ir transportavimą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Stork S+ 9000-12550 liejimo mašina Valdymas: CDS700 Gamybos metai: 2011 Mašina labai geros techninės būklės, visiškai veikianti, paruošta iškartiniam darbui pramoninėje aplinkoje. Uždarymo blokas Uždarymo jėga: 9000 kN Tvirtinimo plokščių matmenys (aukšt. × plot.): 1570 × 1560 mm Atstumas tarp kolonų (aukšt. × plot.): 1010 × 1010 mm Minimalus / maksimalus formos aukštis: 300 – 1190 mm Didžiausias atidaromas plotis: 2290 mm Centravimo žiedo diametras: 250 mm Išstūmiklio eiga: 300 mm Liejimo blokas Sraigto diametras: 115 mm Liejimo tūris: 6232 cm³ Liejimo svoris (PS): 5733 g Liejimo slėgis: 1740 bar Didžiausias liejimo greitis: 300 mm/s Papildoma įranga Pneumatiniai vožtuvai – 6 vnt. Šerdis – 1 vnt. Dcodpfx Aksxyqyxjkok Mašiną galima apžiūrėti ir išbandyti prijungus. Pagal pageidavimą siunčiame nuotraukas ir veikimo vaizdo įrašus. Galime organizuoti pakrovimą ir transportavimą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei KM 110–750 CX Injection Moulding Machine Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control unit with colour monitor, integrated control panel, and 3 USB ports. Plasticising Unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1100 kN Mould opening force: 70 kN Movable platen traverse force: – opening: 35.4 kN Dcsdpfex Avhyjx Akkok – closing: 31.4 kN Platen dimensions (h × v): 745 × 770 mm Tie bar clearance (h × v): 470 × 470 mm Mould opening stroke: 600 mm Mould installation height: 300 mm Platen opening stroke: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Rated pump motor power: 22 kW Installed heater power: 15.62 kW Number of barrel heating zones: 5 Dry cycles according to Euromap: 2000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Liejimo mašina: Krauss Maffei KM 800-5000 MC Pagaminimo metai: 2001 Darbo valandų skaičius: 70 000 h Konfigūracija: Mašina su robotu, apsaugine tvora ir transporteriu Prieinamumas: Galimos dvi identiškos mašinos Uždarymo sistema: Uždarymo jėga: 8 000 kN Maksimali formos atidarymo jėga: 356 kN Judamos plokštės (atidarant) jėga: 98 kN Judamos plokštės (uždarant) jėga: 92 kN Formos plokštės matmenys (Aukštis x Plotis): 1 610 mm x 1 530 mm Atstumas tarp kolonų (Aukštis x Plotis): 1 120 mm x 1 000 mm Formos atidarymo eiga: 1 400 mm Minimalaus formos aukštis: 600 mm Maksimalus formos atidarymas: 2 000 mm Dcjdpfx Akexqh I Ijkek Hidraulinio išstūmiklio eiga: 250 mm Liejimo skyrius: Sraigto skersmuo: 90 mm L/D santykis: 23 Liejimo slėgis: 1 742 bar Liejimo tūris: 2 863 cm³ Liejimo masė (PS): 2 605 g Matmenys ir svoris: Mašinos matmenys (Ilgis x Plotis x Aukštis): 10,5 x 2,86 x 2,89 m Svoris: 43 tonos

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Clamping unit: - Clamping force: 60 t - Tie bar spacing: 370x320 mm - Maximum platen size: 550x530 mm - Ejector: hydraulic - Clamping system: hydraulic Control system: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 Djdpfx Aok Rnq Nskksck Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, KRAUSS MAFFEI KM 420-2000 CX Injection Moulding Machine Basic Data Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine Number: 61030600 Year of Manufacture: 2018 Control System: MC6 Control Panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and the advanced MC6 control system. Plasticising Unit Complete plasticising unit designed for processing thermoplastics. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle opening: 6 mm Injection unit: SP 2000 Dcedpoyugkwefx Akksk Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar spacing (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / backward): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection throughput: 368 cm³/s Screw speed: 285 rpm Plasticising rate: 72.2 g/s Nozzle contact force: 82 kN Electrical & Hydraulic Equipment Pump motor rated power: 75 kW Installed heater power: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Machine Dimensions & Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (L × W × H): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the motor speed to the actual demand during each production cycle. Key Benefits - Reduction of electrical energy consumption by up to 30% - Hydraulic pump servo drive technology - Worldwide quality and proven industrial technology - Reduced energy losses during idle running - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Retrofit possible on existing hydraulic injection moulding machines

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising Unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, opening: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Max. daylight: 1150 mm Dcjdjw U Rcdepfx Akkek Ejector stroke: 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater power: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke according to Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 50 - 100 AX liejimo mašina Elektrinė liejimo mašina Pagaminimo metai: 2011 Darbo valandos: 47799 Operatoriaus kalba: vokiečių, rumunų, čekų Uždarymo mazgas - Formos uždarymo jėga: 500 kN Dodev Hxgqepfx Akkeck - Formos atidarymo jėga: 39,9 kN - Montavimo plokštės matmenys (a x p): 510 x 460 mm - Atstumas tarp kolonų (a x p): 410 x 360 mm Liejimo mazgas - Sraigto skersmuo: 25 mm - Įpurškimo slėgis: 2025 bar - Įpurškimo tūris: 49 cm³ - Įpurškimo masė PS: 45 g Išmatavimai ir svoris - Grynasis svoris su valdymo spintele: 3,9 t - Mašinos matmenys (ilgis x plotis x aukštis): 4,13 x 1,6 x 1,8 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei KM 350–2700 C2+ įpurškimo mašina Gamybos metai: 2004 Valdymas: MC4 Techniniai duomenys Užspaudimo įrenginys * Užspaudimo jėga: 3500 kN (350 tonų) * Plokščių matmenys: 1060 × 1095 mm * Kolonų atstumas: 710 × 710 mm * Atidarymo eiga: 920 mm * Maksimalus atidarymas: 1300 mm * Minimalus formos aukštis: 380 mm * Išstūmėjo eiga: 250 mm * Išstūmėjo jėga: 95 / 48 kN Įpurškimo įrenginys * Sraigto skersmuo: 80 mm * Įpurškimo slėgis: 1829 bar * Įpurškimo tūris: 1433 cm³ * Įpurškimo svoris (PS): 1304 g * Sraigto sukimosi greitis: 218 / 284 aps./min. * Maksimalus įpurškimo našumas: 1508 cm³/s Plastifikavimo sistema * Versija termoplastiniams gaminiams * Atspari dilimui * Atbulinis vožtuvas * Atviras antgalis Varomoji sistema * Siurblio variklio galia: 75 kW * Šildytuvų galia: 36 kW * Šildymo zonų skaičius: 7 * Alyvos bako talpa: 720 l * Sauso ciklo laikas (Euromap): 1550 ciklų/val. Matmenys ir svoris * Matmenys (ilgis × plotis × aukštis): 6910 × 2040 × 2410 mm Dcedpfx Aezkadbokkok * Mašinos svoris: 16,7 t Papildoma informacija * MC4 valdymas su spalvotu monitoriumi * Mašina pritaikyta modernizavimui ESS sistema (energijos taupymas iki 30–60 %)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, „Krauss Maffei KM 1100–12000 MX“ įpurškimo mašina Pagaminimo metai: 2008 m. Robotas: „Wittmann“ Valdymas: MC5 Įranga Visiškai hidraulinė uždarymo sistema MC5 valdymas su spalvotu monitoriumi Integruotas operatoriaus pultas 3 USB prievadai Plastifikavimo sistema, skirta termoplastams Sraigtas, skersmuo 120 mm, su apsauga nuo abrazyvinių pažeidimų Atbulinė užtvara Atviras antgalis Uždarymo įrenginys Uždarymo jėga: 11 000 kN Atidarymo jėga: 770 kN Plokščių matmenys: 2210 × 1910 mm Atstumas tarp kolonų: 1550 × 1250 mm Atidarymo eiga: 2000 mm Minimalus formos aukštis: 600 mm Maksimalus formos aukštis: 1200 mm Maksimalus atidarymas: 2600 mm Išstūmimo įrenginio eiga: 300 mm Išstūmimo įrenginio jėga: 220 / 110 kN Įpurškimo įrenginys Sraigto skersmuo: 120 mm Dsdozkanyepfx Akkeck Įpurškimo slėgis: 1758 bar Įpurškimo tūris: 6786 cm³ Įpurškimo svoris (PS): 6175 g Sraigto sukimosi greitis: 103 / 145 aps./min. Įpurškimo našumas: 1118 cm³/s Įpurškimo našumas su akumuliatoriumi: 1696 cm³/s Plastifikavimo sistema Skirta termoplastinių medžiagų apdirbimui Versija su apsauga nuo abrazyvinių pažeidimų Atbulinė užtvara Atviras antgalis Elektrohidraulinė sistema Siurblio variklio galia: 132 kW Šildytuvų galia: 82 kW Šildymo zonų skaičius: 7 Sausų ciklų skaičius (Euromap): 802 ciklai/val. Alyvos bako talpa: 2440 l Matmenys ir svoris Matmenys (ilgis × plotis × aukštis): 12,47 × 3,65 × 2,82 m Svoris: 73 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, BATTENFELD 35/75 PLUS liejimo mašina Techniniai duomenys: Pagaminimo metai: 2011 Darbo valandos: 89 192 h Uždarymo jėga: 350 kN Įpurškimo tūris: 25,4 cm³ Įpurškimo svoris: apie 23–27 g PS Sraigto skersmuo: 18 mm Dcjdpfx Asy Uk Axokkok Maksimalus formos atidarymo eigos ilgis: 200 mm Kolio atstumas: 270 x 260 mm Plokščių matmenys: 470 x 280 mm Minimali formos aukštis: 150 mm Centro skylės skersmuo: 110 mm Maksimalus įpurškimo slėgis: 2034 bar Hidraulinės alyvos kiekis: 125 dm³ Bendra galia: 28 kW Mašinos svoris: 1050 kg Mašinos tipas: hidraulinė Valdymas: BATTENFELD UNILOG B2 Mašina labai geros techninės ir vizualinės būklės. Turime daugiau mašinų tokios pat konfigūracijos — iš viso 12 vnt., gamintų 2010–2011 m.