Hecht Ag Desq Ii pirkti naudotą (9 515)

Būklė: naudotas, Static Frequency Converter Manufacturer: GARBE LAHMEYER & Co. AG Type: SU3760.2aFZ231 Year of manufacture: 1989 Serial No.: A2K 60229 0001 Rated power: 500 kVA Current type: D Mains voltage: 380 Volt Input frequency: 50 Hz Input current: 760 A Itedpfehutxzjx Ab Nsi Input rated current: 760 A Output voltage: 380 Volt Output frequency: 50 Hz Output current: 760 A Output rated current: 760 A - Control unit GARBE LAHMEYER Type AEB 60 Cabinet dimensions (W x H x D): 2250 x 800/900 x 2550 mm Transport dimensions (W x H x D): 2430 x 1100 x 2700 mm Weight: 1660 kg

Būklė: naudotas, Maximum material width: 100 mm Material thickness: 0 - 3 mm Maximum feed length: 120 mm Material cross-section: 150 mm² Tensile force: 400 N Repeat accuracy: +/- 0.03 mm Itedstqm Dbepfx Ab Nei Upper roller lift: max. 5 mm Upper roller pressing force: max. 6 kN Motor torque: 6 Nm Total power requirement: kW Machine weight: approx. t Space requirement: approx. m - Demonstration model with refurbished used control system - NC roller feed Servopower with direct drive - Plasma-nitrided rollers - Backlash-free drive - Strip edge guide Performance data at 180 degrees - 1000 strokes/min at 15 mm feed length - 300 strokes/min at 70 mm feed length - 200 strokes/min at 120 mm feed length

Gamybos metai: 1987, būklė: beveik kaip naujas (naudotas), mašinos/transporto priemonės numeris: 2008, ID AG 11 PEINER GRAB Manufacturer: Salzgitter Maschinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Model MMGL2000-4, Protection class IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max. pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, volume 2.0 m³ Mainly used in port operations as well as in waste incineration plants, steelworks, and scrap yards. This gripper type is suitable for handling scrap, ingots, waste, biomass, and wood chips, among other materials. The PEINER grab volume represents the internal shell volume when the tines are closed – actual total payload may be higher. Worldwide service network. PEINER grabs are designed for cranes with power supply. Depending on the configuration of your crane, the grab can be mounted either directly onto slewing drives or cross beams. EFFICIENCY – Multi-shell design for diverse bulk materials: Iodshgg Euepfx Ab Noti Example wood chips: Maximized fill volume with minimal handling losses. Featuring the latest shell design, PEINER MMGL grabs are ideally suited for handling wood chips, offering excellent penetration, optimal fill volume, and clean closure. PERFORMANCE – High throughput per loading cycle: Motorized orange peel grabs adapt to the material handled with individually actuated shells. Transport losses are minimized. Optimized construction height, low center of gravity, and robust fabrication make the PEINER MMG / MMGL series universally applicable. PEINER MMG / L models boast extremely short opening and closing times, maximizing possible cycles per hour. ECONOMIC EFFICIENCY – Low maintenance costs: All service points are easily accessible. To increase uptime and minimize maintenance, PEINER units can be equipped with automatic central lubrication. RELIABILITY – An investment for the future: PEINER grabs are the result of decades of experience in bulk material handling, premium components, and modern manufacturing standards. Sales price: €9,500 plus VAT, negotiable, FCA Oradea, Romania Errors, changes, and prior sale excepted. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Būklė: nepatikrintas (naudotas), Funkcionalumas: ribota funkcionalumas, keliamoji galia: 1 200 kg, kėlimo aukštis: 2 800 mm, apkrovos centras: 600 mm, Įranga • Elektrinis važiavimo ir kėlimo pavara • Vairalazdės valdymas • Kompaktiška konstrukcija, labai manevringa • Idealiai tinka padėklams, gėrimų dėžėms, gamybinei medžiagai Būklė Prietaisas iš esmės veikiantis. Itedpfx Aoy Rh Uqjb Nji Akumuliatorius sugedęs ir turi būti pakeistas arba sutvarkytas. Hidraulika, stiebas ir pavara, paskutinio naudojimo metu, buvo darbinės būklės. Aiškūs naudojimo pėdsakai. Akumuliatorius Yra pramoninis akumuliatorius, bet jis nebetinkamas naudoti. Idealu pirkėjui, turinčiam nuosavą akumuliatorių ar techninių žinių.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, mašinos/transporto priemonės numeris: 15257, We are currently offering a "Thalmann" double folding machine in impeccable condition for sale. Exact Specification: THALMANN - Double Folder Press Brake - Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT system The machine is in excellent technical and visual condition and is fully operational. Reason for sale: The Thalmann is being sold due to investment in a new EVOBEND double folding machine. The machine is functioning flawlessly and is in daily operation. Technical Details: Status: 12.03.2026 Controller operating hours: 5,302.1 Pump operating hours: 853.9 Number of cuts: 2,947 Total sheets processed: 11,800 Machine Data: TD 150 – 6.4 m S5 with DFT® Technology Working length: 6,400 mm Insertion depth: 1,250 mm Bending beam width: 10 mm + 10 mm additional rail Max. bending capacity: S = 20 mm 1.5 mm steel sheet (Re 275 N/mm²) / 2.0 mm aluminium / 1.0 mm stainless steel 180° wrap-around capacity: 50% of bending capacity Max. bending angle: 143° (1.0 mm: 135° / 1.5 mm: 130°) Bending accuracy: +/- 0.5° (with crowning) Number of grippers / gripper travel: 4 units, +1, +1 / 15 mm - 1250 mm Max. gripper opening: 35 mm Number of backgauge fingers / travel: 4 units / 5 mm – 1,150 mm Backgauge repeatability: +/- 0.1 mm per cycle Electrical supply: 400 V / 50 Hz / 3 phase + E Rated current / fuse / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions: 8,050 x 2,250 x 2,100 mm Weight: approx. 10,000 kg Compressed air connection: 6 bar (including control, total 6 servo grippers, 6 backgauge fingers) Included Accessories and Features: - Free-running cut-to-length unit / rotary shear: 1.5 mm steel: 1 unit - Curved clamping bar (bottom side), ratio H x D = 1:2: 1 unit - Tapered depth stop with 2-zone function: 1 unit - Additional gripper / finger stop unit: 1 unit - Clamping beams made of high-strength HARDOX steel: 1 unit - Hydraulic material thickness adjustment: 1 unit - Automatic sheet loading and support table: 1 unit - M-Guard remote maintenance support (instead of TeamViewer): 1 unit - LED bending line illumination with RGB color selection: 1 unit Ijdpfxsypxx As Ab Nsti Additionally, the machine is designed so that the “turnover unit” (see information on the THALMANN AG website) can be retrofitted (vendor information - without guarantee). All information is provided without guarantee – errors excepted.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 540 kg, bendras ilgis: 905 mm, bendras plotis: 950 mm, bendras aukštis: 1 125 mm, Gamybos metai: 2013, veikimo valandos: 50 h, įėjimo dažnis: 50 Hz, veleno skersmuo: 40 mm, įvesties srovės tipas: trifazis, Įranga: avarinis stabdymas, sūkių greitis be galo kintamas, Profilio lenkimo staklės ARKUS12 su Tablet350 valdymu (renovuota) Parduodamos profilio lenkimo staklės ARKUS12 su Tablet350 valdymu, pagamintos 2013 m. Staklės 2026 m. buvo pilnai renovuotos ir techniškai atnaujintos su nauja Tablet350 valdymo sistema. Po renovacijos įrenginys dirbo tik apie 50 valandų, todėl yra labai geros arba beveik naujos būklės ir iškart prieinamas. Techniniai duomenys: Staklių tipas: Profilio lenkimo staklės Gamintojas / modelis: ARKUS12 Valdymas: Tablet350 (atnaujinta 2026 m.) Pagaminimo metai: 2013 Darbo valandų: apie 50 val. Būklė: kaip nauja, pilnai renovuota ir atnaujinta Garantija: 2 metų garantija elektronikai Prieinamumas: iškart Daugiau techninės informacijos ir specifikacijų rasite gamintojo svetainėje pbt-ag.com. Pastaba: Itsdsy Exdfepfx Ab Nsi Pardavimas vykdomas be papildomos garantinės atsakomybės, išskyrus nurodytą garantiją.

Gamybos metai: 2023, būklė: naujas, Control system with motor for all older NC feed units. Replacement for Alba, Schleicher, Dreher, PA, etc. Torque range: 6–90 Nm Complete price starting from €3,900 for Alba stepper motors, from €5,900 for servo drives. Can be installed by any qualified electrician. Itsdocn Du Ijpfx Ab Nji

Gamybos metai: 2017, veikimo valandos: 30 h, būklė: beveik kaip naujas (parodų įrenginys), Maximum strip thickness: 4 mm Strip width: 300 mm Ijdpfx Asb Nbglsb Njti Repeat accuracy: +/- 0.05 mm NC drive with compact controller Feed force: 3,000 N (300 kg) Maximum strip pressure: 1.2 t

Būklė: geras (naudotas), Velenas / Spindle 3,5 - 16 - 10 kVA 2750 - 14660 - 23660 aps./min Iodep I T Rqepfx Ab Nsti Apžiūra galima iš anksto susitarus mano sandėlyje!

Gamybos metai: 1980, būklė: naudotas, mašinos/transporto priemonės numeris: 30245035, Offered here is a double scissor lift table. The machine was manufactured in 1980 and has a load capacity of 4,000 kg. The lift table is equipped with a powered roller conveyor system and features XYZ functionality (lifting, traversing, and powered rollers, etc.). Thanks to the separate control unit, the load is moved at an almost constant lifting and lowering speed. The robust construction includes a sturdy scissor bracing and a separate control unit. The unit measures 8.20 m in length and 1.20 m in width. The conveyor belt is 80 cm wide with roller diameters of 10 cm. Ijdpogtmv Sjfx Ab Nsti

Būklė: naudotas,

Būklė: naudotas,

Gamybos metai: 2020, būklė: beveik kaip naujas (parodų įrenginys), plasma-nitrided rollers 64 HRC, max. sheet thickness 3 mm, max. width 120 mm, repeat accuracy +/- 0.06 mm at 50 mm feed, 350 strokes/min, 180° free angle Iodog Ew Ixjpfx Ab Nsti

Gamybos metai: 2004, būklė: visiškai atnaujintas (naudotas), Precision feed for strips up to approx. 100 mm wide and up to 2 mm thick. Feed force: 400 N Repeatability: +/- 0.04 mm Iedpfx Aeg Iiuxeb Neti

Gamybos metai: 2023, būklė: beveik kaip naujas (naudotas), Feed force 3000 N, accuracy 0.04 mm, material cross-section 1000 mm². Warranty 2 years, band width 600 mm. Itedpfx Aolczm Iob Nji

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys), Maximum band width: 140 mm Band thickness: up to 1.5 mm Accuracy: +/- 0.05 mm Tensile force: 500 N (50 kg). Itsdpfx Ajcn Dv Nob Nji

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, 4. Generation des XXL-Systems von Imaging Solutions: 5-in-1-Lösung. Eine LayFlat-Buchblockfertigung aus Einzelblättern in nur einem Arbeitsgang. Mit nur einem Knopfdruck werden alle nötigen Einzelschritte automatisch ausgelöst: Schneiden, Rillen, Falzen, Pressen und Verkleben. LayFlat-Buchblöcke werden mit minimalem Personaleinsatz produziert, wodurch eine Fertigstellung und der Versand noch am selben Tag möglich sind. Technische Daten: - 2.300 Bogen pro Stunde - XL-Buchblockformate bis 370 mm x 457 mm (14,5" x 18") - Hohe Leistungsfähigkeit: bis zu 250 Buchblöcke/Stunde Iedjn Ut D Njpfx Ab Njti - Barcodegesteuerte Produktauswahl: Unterschiedliche Seitenlängen und Buchkonfigurationen (Inlays) innerhalb einer Bahn möglich – reduziert Rüstzeiten - Optionaler Inlay-Zuführer mit Stapelhöhe bis 220 mm (8,66") - Unbegrenzte Anzahl von Inlays kann zwischen zwei Seiten eingeklebt werden - Aktive Verstellung des Leimkopfs für präzise und homogene Klebstoffauftragung - Optionale Inline-Buchpresse für perfekte Buchrücken - Einfach zu bedienen über Touchscreen – vollautomatisches 5-in-1-Finishing-System - Schneiden, Rillen, Falzen, Pressen und Verkleben in nur einem Arbeitsschritt - Vollständige LayFlat-Buchblöcke aus Einzelblättern – integrierbar in barcodegesteuerte Workflows (z.B. inline mit Dreimesser-Schneider) - Sorgt für gleichbleibende Premiumqualität bei niedrigen Produktionskosten - Premium-LayFlat-Fotobuchtechnologie für Panoramaseiten - Verarbeitet Original-Fotopapier und Digitaldruckpapier.

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), easyFrame ist eine halbautomatische Lösung für das Keilrahmenaufziehen, entwickelt von Imaging Solutions AG. Die Maschine kann bis zu 50 Rahmen pro Stunde verarbeiten (je nach Bediener). Sie befindet sich in ausgezeichnetem Zustand. Mit den Rahmenhaltern können Keilrahmen für Leinwandgrößen von 8x6 bis 43x43 Zoll gefertigt werden. Iodjn Ut Hcjpfx Ab Nsti

Būklė: geras (naudotas), Bosch Rexroth aluminium profile workstation Bosch Rexroth aluminum profile Complete plastic glazing 4 cm worktop with a light gray melamine resin direct coating Itjdpfx Ajqbq E Eeb Nsi 190 x 90 cm Workstation dimensions WxDxH 195 x 93 x 220 cm Magnifier lamp 8062D2 You can find more new and used items in our shop! International shipping costs on request!

Būklė: geras (naudotas), Gamybos metai: 2000, Leutenegger (Starrag) Washing Box Technical Data Year of manufacture: 2000 Tank capacity: approx. 0.9 m³ Chemical: Henkel P 3 Voltage: 3x400V/230V 50 Hz Power supply: 40 A Ijdpfx Abjd Ncihe Neti Control voltage: 24 V DC Max. temperature: 50°C Heating: electric Heating capacity: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m³/h Shipping costs on request You can find more new and used items in our shop! International shipping costs on request!

Būklė: geras (naudotas), Leutenegger (Starrag) plovimo dėžė Techniniai duomenys Vonios talpa: apie 0,9 m3 Chemija: Henkel P 3 Įtampa: 3x400V/230V 50 Hz Maitinimas: 40 A Valdymo įtampa: 24 V DC Maksimali temperatūra: 50 °C Šildymas: elektrinis Šildymo galia: 3x3,25 kW = 9,75 kW Darbinis siurblys: 3 kW Ištraukiamo oro ventiliatorius: 0,37 kW Ištraukiamo oro kiekis: 400 m3/h Siuntimo išlaidos pagal užklausą Itodpfxjd Nlybo Ab Nji Finansavimas per mūsų banką taip pat galimas. komplett-konzept.leasingo.de Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos pagal užklausą

Būklė: geras (naudotas), BALZERS LTE 020 – Termiškai valdoma mėginių paruošimo stotis ✔ Naudojimo sritys: dangų technologijos, puslaidininkių apdirbimas, paviršių analizė, elektroninė mikroskopija/ • Skaitmeninis ekranas su 4 kanalais (B1–B4) • Temperatūros rodymas °C • Nustatymas per SET / UP / DOWN • Atskiras tinklo ir lempos valdymas • Maitinimo įtampa: 220 V Itedpfoxl A Edox Ab Nei Pastaba: Dėl detalių techninių duomenų ir naudojimo rekomendacijų primygtinai rekomenduojame peržiūrėti originalius duomenų lapus arba tiesiogiai kreiptis į gamintoją. Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos – pagal užklausą!

Būklė: geras (naudotas), Gamybos metai: 2016, Bosch Rexroth linijinis cilindras – mašina Mašina yra specialus gaminys, sukurtas Bosch įmonės vidiniam naudojimui gamybos procese. Mašinos komplektacija: Rexroth MSK050C-0600-NN-M1-UG1-NNNN trijų fazių sinchroninis PM variklis Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 – Įtampa: 380–480 V, 6 bar, 1300 kg, pagaminimo metai: 2016 Būklė: naudota Pilnas gamyklos uždarymas, didelis pasirinkimas sandėlio antresolių, palečių ir lentynų stelažų, paternosterinių sistemų. Aukštos kokybės pramoninės staklės: tekinimo, šlifavimo, rankiniai įrankiai. Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Iedpfxehufclj Ab Njti Tarptautinio pristatymo kaina pagal užklausą!

Būklė: geras (naudotas), Gamybos metai: 1989, mašinos/transporto priemonės numeris: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42, each in 4/42mm configuration (5x available) with Müdata, Mütrans, without creel, exceptionally clean machines from Germany, 2nd hand NF42 in 4/42mm from 1988–1990 AN. No.: 88.04.017 H ex Alge, with Müdata, 16 shafts, very clean, €7,000 AN. No.: 88.04.169 D ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 213 Iodpfxsr I Am Ho Ab Noti AN. No.: 89.04.019 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 223 AN. No.: 89.04.046 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 AN. No.: 90.00.066 B ex Alge, with Müdata, 16 shafts, very clean, €7,000

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AN-No.: 88.04.017 D, 8 units of very clean (refurbished) Jakob Müller Frick AG weaving looms NF42 from 1988, 1989, and 1990 available from my stock. All machines are running smoothly and are 100% operational (completely overhauled). Each machine has 12 shafts, is supplied without creel, and comes with Mütrans, some also with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Stock no.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm overhauled from 1990, each at €6,500 Stock no.: 90.01.704 B Stock no.: 90.01.755 A Stock no.: 90.01.229 A 1 unit NF 2/84mm overhauled from 1989 for €6,500 Stock no.: 89.00.118 D 3 units NF 2/84mm overhauled from 1988, each at €6,500 Stock no.: 88.04.244 A Stock no.: 88.02.758 A Stock no.: 88.02.758 B The machines originate from a curtain tape production and were originally equipped with a Z compartment. They have been converted to standard compartments as part of the general overhaul. All tension beams and pressure rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or have been newly vulcanized. The central lubrication unit in the chain case has been optimized by us. All machines have the first shaft position free (for heavier reeds) and are fitted with 12 shafts. All machines are equipped with Mütrans II. Machines can optionally be supplied with double belt take-off (for heavy fabrics). This is possible for 4–5 machines, as far as I know. It is also possible to equip them with fine-knurled tension beams, also for 4–5 machines. All needle holders are suitable for double needles. Two additional Mütrans II systems can be fitted upon request for this purpose. The machines have been completely rebuilt. All bearings, shafts, and bushings have been checked and replaced if necessary. All swing arms have been inspected and replaced as needed. Itedpfxor Ix Igo Ab Nji Configuration installed: 1st shaft position free (spacer block fitted) 2nd and 3rd shaft: swing arm 201 4th–6th shaft: swing arm 202 7th–9th shaft: swing arm 203 10th–12th shaft: swing arm 204 13th shaft: swing arm 205 All heald springs have been checked and replaced as required, with none being brittle, cracked, or defective. The electrical installation has been checked, the thread monitoring board has been inspected and repaired or replaced as necessary. All machines are painted in RAL 6021 Müller pale green. All covers are clean and undamaged. The machines are offered without Müdata. Four of the machines are also fitted with crawl (crawler) gear. All machines have been set up and tested. The machines are delivered without oil, weft threads, slats, reeds, needles, or chain links. Delivery is on Euro pallet, FOB Wuppertal.