Fasti 2040 X 4 pirkti naudotą (93 280)

Gamybos metai: 1978, būklė: geras (naudotas), Manufacturer: HAEUSLER Model: VRM-HY Year of manufacture: 1978 Specifications Metric US Standard Rolling Width: 3050 mm Plate Thickness at 3x Upper Roll Ø: 60 mm Plate Thickness at 5x Upper Roll Ø: 70 mm Plate Thickness for Pre-Bending: 50 mm Chedpfx Aaskvm S Ns Doa Upper Roll Diameter: 630 mm Lower Roll Diameter: 600 mm Side Roll Diameter: 500 mm Number of Rolls: 4 Bending Speed: 0 - 5 Adjustment Speed Lower Roll: 200 mm/min Adjustment Speed Side Roll: 200 mm/min Number of Driven Rolls: 2 Motor Power: 120 kW Dimensions (approximate) Length: 5790 mm Width: 4200 mm Height: 4200 mm Weight: 85,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. All information is given in good faith, however, accuracy cannot be guaranteed. As such, these details do not constitute any representation or contractual terms. We recommend that you verify all essential details independently.

Gamybos metai: 1980, būklė: geras (naudotas), Manufacturer: HAEUSLER Model: VRM-HY Year of manufacture: 1980 Cjdjkvm Szspfx Aa Dsha Specifications Metric US Standard Roll width: 3,000 mm Plate thickness at 3 x top roll diameter: 130 mm Plate thickness at 5 x top roll diameter: 140 mm Plate thickness for pre-bending: 120 mm Top roll diameter: 950 mm Bottom roll diameter: 850 mm Side roll diameter: 180 mm Number of rolls: 4 Bending speed: 2 + 4 Bottom roll adjustment: 0 - 400 mm/min Side roll adjustment: 0 - 400 mm/min Number of driven rolls: 2 Power: 132 + 37 kW Dimensions (approximate) Length: 12,000 mm Width: 5,440 mm Height: 5,650 mm Weight: 286,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The details are supplied in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute any representation or terms of contract. We recommend verifying all important details.

Gamybos metai: 2018, būklė: geras (naudotas), Manufacturer: FACCIN Model: 4HEL 3590 Control: Siemens TOUCH Year of Manufacture: 2018 Specifications Metric / US Standard Roll Width: 3500 mm Cjdpfx Askvm Nfja Doha Plate Thickness at 3 x Top Roll Diameter: 80 mm Plate Thickness at 5 x Top Roll Diameter: 110 mm Plate Thickness for Pre-bending: 90 mm Top Roll Diameter: 900 mm Lower Roll Diameter: 800 mm Side Roll Diameter: 600 mm Number of Rolls: 4 Bending Speed: 0–6 m/min Lower Roll Adjustment: 0–200 mm/min Side Roll Adjustment: 0–400 mm/min Top Support: yes Side Support: yes Number of Driven Rolls: 2 Power Rating: 90 + 75 + 9 kW Approximate Dimensions Length: 4430 mm Width: 8800 mm Height: 11000 mm Weight: 178000 kg Please note: The information on this page has been provided to the best of our knowledge based on information from us and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, no representations or contractual terms are implied. We recommend verifying all critical details.

Gamybos metai: 1991, būklė: geras (naudotas), Manufacturer: HAEUSLER Type: VRM-HY Year of manufacture: 1991 Specifications Metric / US Standard Roller width: 3000 mm Plate thickness at 3 x top roller Ø: 120 mm Plate thickness at 5 x top roller Ø: 150 mm Pre-bending thickness: 100 mm Top roller Ø: 910 + 820 + 740 mm Bottom roller Ø: 940 mm Side roller Ø: 780 mm Number of rollers: 4 Bending speeds: 2 + 4 Bottom roller adjustment: 200 mm/min Side roller adjustment: 500 mm/min Number of driven rollers: 2 Power: 300 kW Dimensions (estimated) Length: 8000 mm Width: 5400 mm Height: 5400 mm Weight: 290,000 kg Please Note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all critical details independently. Cjdjkwcc Njpfx Aa Djha

Būklė: geras (naudotas), bendras ilgis: 4 010 mm, bendras plotis: 2 100 mm, plokštės aukštis: 200 mm, Manufacturer: STOLLE Model: RDG Year of manufacture: 1980 Specifications Metric US Standard Length: 4010 mm Width: 2000 mm Height: 220 mm Number of T-slots: 13 T-slot spacing (pitch): 400 mm T-slot size: 35 mm Weight per plate approx.: 5.3 tons Dimensions (approximate): Length: 4010 mm Width: 2100 mm Height: 220 mm Weight: 5300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. Information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representations or contractual terms. We recommend verifying all essential details yourself. Cjdpfx Aajwp Dhds Doha

Būklė: naudotas, rida: 281 811 km, galia: 315 kW (428,28 AG), pirmoji registracija: 07/2014, kuro tipas: dyzelinas, bendras svoris: 32 000 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 04/2026, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, krovinio erdvės tūris: 19 m³, krovimo vietos ilgis: 6 500 mm, krovinių skyriaus plotis: 2 400 mm, krovos erdvės aukštis: 1 200 mm, Gamybos metai: 2014, Įranga: ABS, oro kondicionavimas, suodžių filtras,

Būklė: naudotas, rida: 281 811 km, galia: 315 kW (428,28 AG), pirmoji registracija: 07/2014, kuro tipas: dyzelinas, bendras svoris: 32 000 kg, ašių konfigūracija: 3 ašys, kita apžiūra (TÜV): 04/2026, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, krovinio erdvės tūris: 19 m³, krovimo vietos ilgis: 6 500 mm, krovinių skyriaus plotis: 2 400 mm, krovos erdvės aukštis: 1 200 mm, Gamybos metai: 2014, Įranga: ABS, oro kondicionavimas, suodžių filtras,

Gamybos metai: 1999, būklė: geras (naudotas), Sheet width: 500 – 1,600 mm Sheet length: up to 4,500 mm Stack weight: up to 3 t Stack height (with pallet): up to 500 mm Speed: up to 40 m/min. Chjdpfx Aaobh Dtwe Dsa

Gamybos metai: 1999, būklė: geras (naudotas), Drive/plate brake/crop shear for slitting line Strip width: 500 - 1,650 mm Strip thickness: 0.4 – 4 mm Number of drive rollers: 2 Chedpjgryl Ajfx Aa Dea

Gamybos metai: 1999, būklė: geras (naudotas), Driver/plate brake/crop shear for slitting line Band width: 500 – 1,650 mm Band thickness: 0.4 – 4 mm Csdpogm E Rdofx Aa Doha Number of driver rollers: 2

Gamybos metai: 1984, būklė: geras (naudotas), 21 straightening rolls, Ø 60 mm Chsdpfx Aaerrl Us Dja Strip width: max. 1,250 mm Strip thickness: 0.6 – 4 mm

Gamybos metai: 1999, būklė: geras (naudotas), Drive/plate brake/crop shear for slitting line Strip width: 500 - 1,650 mm Strip thickness: 0.4 – 4 mm Cjdjgm E Rljpfx Aa Deha Number of drive rollers: 2

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Parduodu furniravimo ir plėvelės presą ORMA NPC-30 4-40, medžiagos matmenys 2500 x 1200 mm. Alyvos šildymas. Bendra galia 21,7 kW (maksimali). Labai gera būklė. Prieinama iš karto. Csdpfx Aaeu E E A Te Dsha

Būklė: geras (naudotas), Gamybos metai: 2017, V304 Plattenbearbeitungsmaschine (inklusive 1 Portalträger à 6.500 mm und Seitenwagen) ◼ Diese V304 Plattenbearbeitungsmaschine ist für die Bearbeitung von Blechen bis zu 3.050 mm x 18.000 mm für Fasenschnitt mit Plasma und Beschriftung (Nadelmarkierer, falls vorhanden) sowie bis 4.100 x 18.000 mm für Brennschneiden und Beschriftung (Nadelmarkierer, falls vorhanden) geeignet. ◼ X-Führungsschiene (21.000 mm beidseitig an der Maschine, einschließlich Doppel-Linearführung, Schrägverzahntem Zahnstangenantrieb und Gummischutzband) ◼ Plasmaschneid- und Absaugtisch (4.300 mm x 18.720 mm, 2 Kanäle, 1 Stück, geeignet für ≥ 350A Schnittleistung) ◼ Position 1: Plasmaschneideinheit Kjellberg SmartFocus400 (1 Stück, automatische Gaskonsole, komplett mit Schneidparameter-Datenbank) ◼ Plasma 3D-Fasenschneideinheit (1 Stück, inkl. 5 NC-Achsen, Voortman Höhensteuerung, intelligentes Brennerpositioniersystem und 3D-Kollisionssensor, geeignet für x-, y-, k- und v-Nähte) ◼ Angetriebene Aufhängung (1 Stück, servomotorisch angetrieben, inkl. Laserpointer) ◼ Schlackeblocker (1 Stück, inkl. 1,2-Liter-Behälter) ◼ Lichtbogenschutz (1 Stück) ◼ Position 2: Plasmaschneideinheit Kjellberg SmartFocus400 (1 Stück, automatische Gaskonsole, komplett mit Schneidparameter-Datenbank) ◼ Plasma 3D-Fasenschneideinheit (1 Stück, inkl. 5 NC-Achsen, Voortman Höhensteuerung, intelligentes Brennerpositioniersystem und 3D-Kollisionssensor, geeignet für x-, y-, k- und v-Nähte) ◼ Gezogene Aufhängung (1 Stück, mit automatischer Adressierung) ◼ Schlackeblocker (1 Stück, inkl. 1,2-Liter-Behälter) ◼ Lichtbogenschutz (1 Stück) ◼ Position 3: Autogen-Brennschneidbrenner 4.0 (1 Stück, automatische Gaskonsole, Zündung und Durchstechen, komplett mit Schneidparameter-Datenbank) ◼ Voortman Höhensteuerung (1 Stück, kapazitive Höhenregelung) ◼ Gezogene Aufhängung (1 Stück, mit automatischer Adressierung) ◼ Position 4: Autogen-Brennschneidbrenner 4.0 (1 Stück, automatische Gaskonsole, Zündung und Durchstechen, komplett mit Schneidparameter-Datenbank) ◼ Voortman Höhensteuerung (1 Stück, kapazitive Höhenregelung) ◼ Gezogene Aufhängung (1 Stück, mit automatischer Adressierung) Chedpfx Aovpalaea Dja ◼ Position 5: Autogen-Brennschneidbrenner 4.0 (1 Stück, automatische Gaskonsole, Zündung und Durchstechen, komplett mit Schneidparameter-Datenbank) ◼ Voortman Höhensteuerung (1 Stück, kapazitive Höhenregelung) ◼ Gezogene Aufhängung (1 Stück, mit automatischer Adressierung) ◼ Oberleitungen anstelle von Bodenverlegung ◼ Donaldson Absauganlage DFO 4-48 - 200L (inkl. Frequenzumrichter) ◼ Klimaanlage für Schaltschrank (bis zu einer Umgebungstemperatur von 55°C) ◼ Hard- und Software (inkl. VACAM 'Machine Edition', VACAM 'Office Edition', VACAD-Editor-Softwaremodul, VANEST-Verschachtelungssoftware, Layout-Markierungs-Softwaremodul, Online-Support) ◼ Postprozessor für SigmaNEST (SigmaNEST wird kundenseitig bereitgestellt) ◼ Sicherheitseinrichtungen (Sicherheitsstoßfänger, Not-Aus-Leine)

Gamybos metai: 2000, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Aluminium vertical storage silo with extended support ring Technical Data / Dimensions Available quantity: 4 Capacity: approx. 174,000 litres Tank type: Silo Condition: Used Food grade: No Design: Vertical Internal diameter: approx. 4,200 mm External diameter: approx. 4,260 mm Cylindrical height: approx. 15,000 mm Total height: approx. 16,250 mm Weight: approx. 3,500 kg Specific weight of medium: 1 t/m³ Operating pressure: Non-pressurized Notes: A new access ladder for the silo installation can be offered optionally. Material / Construction Inner shell material: Aluminium Internal weld seams ground Notes: Material grade AlMg3 / AlSi Equipment Support design: Base ring/support skirt Number: 1 Mounting: Fixed Top base: Conical top Bottom base: Cone Cone angle: 90 degrees Top section: 1 x Roof edge railing, height: approx. 1,200 mm 1 x Access walkway with safety railing 2 x Crane lugs 1 x Manhole DN 500 1 x Connection flange for level measurement 1 x Threaded socket for max sensor 1 x Flange DN 100 (filling) 1 x Vent with hood Shell: 1 x Service door (approx. 1,800 x 850 mm) 1 x Cable protection pipe 1 x Fill line DN 100 (insulated), ending in TW connection 1 x Weld-in adapter for empty indication Bottom section: The silos terminate below in a 90° cone with DN 200 flange with emergency shut-off slide valve. Fittings: The measuring and control technology installed on the silo is included free of charge. However, no guarantee can be given for its proper functionality. Chodpjy Ufigsfx Aa Dea Documentation Drawing

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Pjovimo ilgis: 2520 mm Lakštinio plieno storis prie 400 N/mm²: 4,0 mm Smūgių per min.: 47 Galinysis atmušėjas apie: 750 mm Iškyša: 350 mm . Labai gera originali būklė! . Įranga: kairys šoninis atmušėjas, 750 mm - pjovimo tarpo reguliavimas - galinis atmušėjas su nonijumi ir didinamuoju stiklu (ir lempute) Cjdpfx Aaey Rf T Rs Doha - perkrovos apsauga . Kita: abu peiliai aštrūs ir dar nepagrąžinti Cilindrai sausi

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, mašinos/transporto priemonės numeris: P 710, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), alyvos bako talpa: 120 l, bendras svoris: 6 500 kg, valdymo tipas: CNC valdymas, Machine is in like-new condition. The High Quality Press Brake (HQPB) is the top model amongst Placke press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet construction, takes place in-house. By utilising state-of-the-art technology combined with years of experience in metal forming, the HQPB series enables bending operations at the highest standard. Even the basic version, supplied as standard, is a fully functional press brake. This package of safety, reliability, and efficiency, together with straightforward operation, allows us to meet the highest requirements for precision in the bending process. Machine body: - Base machine, constructed from S 355 N steel - Side frames welded with 2 pressure pipes and top-mounted oil tank - Above-floor design - Coating (2-component structural paint), light grey (RAL 7035) and signal grey (RAL 7004) Upper beam: - Press beam stress-relieved annealed - Immersion depth measurement, reading head guided via ball bearing guide - Separate Y1 and Y2 control, electrical tilt monitoring Hydraulic system: - Hydraulic proportional control valve system with electronically monitored cylinder synchronisation - Solid steel cylinders with inductively hardened piston rods - Low-noise internal gear pump Ram clamping: - Upper tool adapter system WILA, hydraulic clamping system, type NSCL-II-HC, fully hardened, Max. load: head-bearing = 250 t/m, shoulder-bearing = 300 t/m Lower beam: - Narrow table incl. manual clamping bar, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. The use of a mechanical crowning system for deflection compensation is not required by design. - Single-V die holder (13x20) - Working height: 1050 mm → with 55 mm tool height Front of the machine: 2 aluminium support arms at the front, approx. 600 mm long, incl. 2 tilting stops, measuring tape, and plastic wear strip. The support arms are moveable on a recirculating ball guide and can be height-adjusted via a slotted hole from 55 mm up to 100 mm die height. The ball guide is milled into the lower beam. Control and regulation technology: - Operating voltage 400V / 3Ph / 50Hz - Switchgear and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis controlled”: - X and R axes CNC-controlled - Z axis manual Delem DA 66 Touch control on swivel arm. Safety equipment in accordance with CE standards Technical data and working area: Bending force 600 kN Working length 1550 mm Clearance between frames 1200 mm Cedpfx Aaeyvzkie Deha Installation height 400 mm Throat depth 255 mm Ram stroke 215 mm Ram speeds: Rapid approach max. 280 mm/s Working speed max. 9.8 mm/s Return speed max. 170 mm/s Ram positioning accuracy ± 0.01 mm Ram tilt ± 10 mm Electrically limited to ± 5 mm Height of lower beam above floor 947 mm Motor power 5.5 kW Main dimensions: Pit depth 0 mm Side frame foundation depth 0 mm Machine weight approx. 6.5 t Tank capacity (hydraulic oil) 120 l (Specifications subject to change) Machine rear lighting: Work area lighting by LED strip between the uprights.

Būklė: naujas, Pressure: 125 tn Bending length: 3200 mm Frame gap: 2655 mm Motor: 11 kW Maximum ram stroke: 200 mm Chjdpfowacqxjx Aa Dsa Machine model: KK Industries 125x3200, 4 axes Y1-Y2-X-R & with CNC crowning system Nominal force: 125 tons Bending length: 3200 mm Distance between uprights: 2655 mm Throat depth: 400 mm Ram stroke: 200 mm Maximum opening: 455 mm Ram approach speed: 180 mm/s Ram return speed: 160 mm/s Ram working speed: 13 mm/s Main motor power: 11 kW CNC system: ZY68 Number of controlled axes: 4+1 Oil tank capacity: 300 L Backgauge travel (X-axis): 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Motor power: 0.85 kW Backgauge R axis R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Dimensions: Length: 3450 mm Width: 1580 mm Height: 2550 mm Weight: 7100 kg Delem T53 controller (additional charge €5,000)

Būklė: naujas, Sheet length: 2060 mm Sheet thickness: 4 mm Dimensions (LxWxH): 2700 x 2250 x 1400 mm Motor: 7.5 kW Weight approx.: 3000 kg Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm travel - Shadow line illumination - 1 stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball transfer table - Simple blade gap adjustment from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier for rear safety guards Csdjgickrepfx Aa Dsha

Būklė: naujas, Sheet length: 2560 mm Chedsgickvopfx Aa Doa Sheet thickness: 4 mm Dimensions (LxWxH): 3200 x 2250 x 1400 mm Motor: 7.5 kW Weight approx.: 3500 kg Standard accessories: - NC control - Programmable, motorized backgauge with 750 mm stroke - Shadow line illumination - 1 piece stop rail with measuring scale - 2 sheet support arms - 1 sheet support arm (for models 1106, 1306, 1505) - Finger guard - Ball roller table - Simple blade gap adjustment from the front - Ball screw spindle - Stroke counter - Portable foot pedal with emergency stop button - Light barrier on the rear safety guards

Būklė: naujas, Laser Power: 4 Loading capacity: 1250 kg X-axis travel: 2020 mm Y-axis travel: 4050 mm Z-axis travel: 350 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Table exchange time: approx. 10 s Cooling system: water chiller Weight approx.: 11,500 kg Dimensions (LxWxH): 4400 x 10,000 x 2,120 mm The FLC Series is a fast, highly sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with upper-class standards. The machine can accommodate laser power up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are typically used in the production of agricultural machinery, textile machinery, food processing machinery, construction machinery, elevators, and other large-scale machinery and equipment. It is an ideal cutting solution for those looking to outsource cutting operations. Enables easy blowing, cutting, pausing, calibration simulation, and more with wireless remote control. Standard nesting software program that prepares parts for cutting very quickly and automatically, requiring no operator intervention. Also equipped with a flycut cutting function. Thanks to the dual shuttle table, you can continue cutting without downtime. All our machines are manufactured to European standards and have CE certification. Our FLC models feature automatic nozzle cleaning and a dual camera system. Available cutting areas include 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus and an active anti-collision function, as well as an auto-view function that detects obstacles and automatically moves away. Cutting heads feature automatic cooling. The bridge used in all our machines is made of a single-piece welded aluminum alloy sheet construction. The single-piece design ensures bridge rigidity and prevents deformation, maintaining its shape when subjected to impact, overlap, or load. Furthermore, due to its structure being three times lighter than steel bridge profiles, we achieve higher speeds and accelerations with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic focusing head - Nesting software - 19-inch touch CNC controller - Fly cutting - Nozzle and lens starter kit - Parts debris drawers - Automatic table exchanger - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera SPECIFICATIONS VALUE Working area: 2000 x 4000 mm Cedsruwbispfx Aa Deha Loading capacity: 1200 kg XY axis travel: 2020 x 4050 mm Z-axis travel: 350 mm XYZ axis guidance: 4-point ball cage XY axis drive system: Rack and pinion Z-axis drive system: Ball screw XY axis speed: 100 m/min Z-axis speed: 30 m/min XY positioning accuracy: 0.05 mm XY repeatability: 0.03 mm Table exchange time: 10 s Laser source: Raycus / Hans / JPT Laser output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system: Fscut Laser cutting head: Raytools / BOCI / WSX Supported assist gases: Air/N2

Būklė: naujas, Laser power: 4 kW Working width: 1,500 mm Accuracy +/-: 0.05 mm Max. load capacity: 1,250 kg Dimensions (LxWxH): 11,200 x 3,500 x 2,560 mm Approx. weight: 10,000 kg Max. cutting thickness (aluminium): approx. 6 mm Max. cutting thickness (stainless steel): approx. 8 mm Max. cutting thickness (mild steel): approx. 20 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-performance laser cutter built to upper-tier standards, capable of handling laser powers up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large-scale industrial plants. It is an ideal cutting solution for anyone looking to outsource production processes. Chsdpfx Aaertfx So Dea The wireless remote control allows for easy blowing, cutting, pausing, simulation for calibration, and more. A standard nesting software package efficiently prepares cutting jobs for production without operator intervention. The machine also features a fly-cutting function. With its dual shuttle table, cutting can continue without waiting times. All our machines are manufactured to European standards and come with CE certification. Our FLC models feature nozzle cleaning and a dual-camera system. Available cutting surfaces: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head is equipped with autofocus, active anti-collision, and an auto-view function that detects obstacles and automatically adjusts the head movement. Cutting heads are automatically cooled. Bridges used in all our machines are constructed as one-piece, welded assemblies from aluminum alloy plates. This enhances rigidity, prevents deformation under impact or loading, and ensures structural stability. Additionally, being three times lighter than bridges made of steel profiles, they permit higher speeds and acceleration, while reducing motor power requirements. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC controller - Fly-cutting - Nozzles and lenses (starter kit) - Scrap drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote control - Automatic lubrication system - Dual camera system

Būklė: naujas, Pressure: 63Bending length: 2500 mmColumn gap: 1980 mmMotor: 11 kWRam stroke - max.: 150 mmOpening width: 400 mmCNC press brake KK Industries 63x2500, 4 axes Y1-Y2-Y-X-R with CNC crowning Technical Specifications: Press Force: 63 t Bending Length: 2500 mm Distance between columns: 1980 mm Throat Depth: 300 mm Ram Stroke Length: 150 mm Maximum Opening: 400 mm Ram Down Speed: 180 mm/s Ram Return Speed: 170 mm/s Ram Working Speed: 14 mm/s Main Motor Power: 11 kW CNC Control: ZY68 Number of Control Axes: 4+1 Oil Tank Capacity: 150 L Backgauge (X-Axis): X-Axis Travel: 600 mm X-Axis Speed: 200 mm/s Positioning Accuracy: ±0.10 mm Chsdjv Trgqspfx Aa Dea Repeatability: ±0.015 mm Motor Power: 0.85 kW R-Axis: R-Axis Travel: 150 mm R-Axis Speed: 100 mm/s Positioning Accuracy: ±0.10 mm Repeatability: ±0.015 mm Dimensions and Weight: Length: 2750 mm Width: 1350 mm Height: 2320 mm Weight: 4000 kg

Būklė: naujas, Pressure: 160 Bending length: 3200 mm Frame width: 2655 mm Installation height: 400 mm Motor: 11 kW Max. ram stroke: 200 mm Repeatability: 0.015 mm Positioning accuracy: 0.10 mm CNC press brake KK Industries 160x3200, 4 axes Y1-Y2-Y-X-R with CNC crowning Standard equipment: Csdpfjv S Npyjx Aa Doha - Robust design for high stability and precision. - CNC axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. - CNC-controlled motorized crowning device for precise adjustment. - ZY 68 CNC controller from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. - Back gauge with linear guides and ballscrew, equipped with 4 stop fingers for precise material positioning. - 2 sheet support arms for ergonomic material handling. - Laser safety device on the upper beam to ensure operator safety during operation. - Quick clamping system for the upper tool to enable fast and easy tool changes. - Upper tool system: Promecam/Amada, segmented and gooseneck design for maximum flexibility. - Multi V-die system: Compatible with both Promecam and Amada systems. - CE safety equipment to comply with all relevant safety regulations. Delem T53 control (surcharge €5,000)

Būklė: naujas, Press force: 40 tons Bending length: 1600 mm Distance between uprights: 1980 mm Motor: 4 kW Chodpfewacq Esx Aa Dja Ram stroke - max.: 150 mm Opening height: 370 mm CNC press brake 40x1600 with 4 axes (Y1-Y2-X-R) and CNC crowning Technical specifications: Nominal pressing force: 63 kN Bending length: 1600 mm Distance between columns: 1980 mm Throat depth: 250 mm Ram stroke: 150 mm Maximum opening: 370 mm Ram descent speed: 180 mm/s Ram return speed: 150 mm/s Working speed: 15 mm/s Main motor power: 4 kW CNC system: ZY68 Number of controlled axes: 4+1 Oil tank capacity: 90 L Back gauge (X-axis): X-axis travel: 600 mm X-axis speed: 200 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Motor power: 0.85 kW R-axis: R-axis travel: 150 mm R-axis speed: 100 mm/s Positioning accuracy: ±0.10 mm Repeatability: ±0.015 mm Dimensions and weight: Length: 1850 mm Width: 1250 mm Height: 2180 mm Weight: 2700 kg Additional motor power: 0.85 kW