Energo Gtvs400Nc pirkti naudotą (968)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical injection molding machine with rotary table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Metering volume: 193 cc Clamping unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control: UNILOG B6 Additional equipment: Vertical injection molding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valves x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Gedpfezc Nubex Ahleuf Rotary table driven by a servomotor, controlled by a frequency inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up and checked by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid machine / Operating hours: approx. 29,000 in automatic operation Year of manufacture: 2014 Injection Unit: Screw diameter: 50 mm Shot weight: 402.2 g Injection pressure: 1714 bar Dosage volume: 442 cm³ Clamping Unit: Clamping force: 150 t Tie bar spacing: 520x470 mm Platen size: 760x755 mm Ejector: hydraulic Guedezc Nuhspfx Ahlef Clamping unit: hydraulic Control: UNILOG B6P - Touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor powered by inverter – energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All listed machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection Unit: Screw diameter: 35 mm Gedpfszc Nv Ejx Ahlouf Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy efficient, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x2 Hydraulic core pull x1 Injection unit hardened – bimetallic Main drive motor – servo motor driven via frequency inverter – energy-saving Built-in printer Machine has been regularly serviced by authorized Sumitomo Demag service Robot: Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes powered by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Robot with adapter, safety enclosure Purchase of the robot at additional cost Dimensions: Weight: 4,400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2003, Sausasis trijų fazių skirstomasis transformatorius – gamintojas ABB Brilon, Vokietija, modelis Resibloc, 1000 kVA, 10/0,4 kV, IP00, Uk = 6 %, Dyn1, vario / aliuminio apvijos, standartiniai nuostoliai, naudotas labai trumpai, visiškai veikiantis. Godpfxozt Nwps Ahleuf

Būklė: naujas, Pressing force: 220 t Bending length: 4100 mm Frame gap: 3600 mm Throat depth: 410 mm Ram speed: 150 mm/sec Working speed: 10.0 mm/sec Return speed: 140 mm/sec Stroke: 265 mm Installation height: 480 mm Table height: 900 mm Table width: 110 mm Oil capacity: 300 ltr. Operating voltage: 400 Volt Total power requirement: 18.5 kW Weight: 15,000 kg Dimensions (L-W-H): 5000 x 2400 x 2850 mm ALPMAC manufacturer video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC product video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B220-4100 – CNC electro-hydraulic press brake with: * Increased installation height * Extended cylinder stroke * Extended throat depth ----- ! MANUFACTURED FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH PERFORMANCE HYDRAULICS (HAWE GERMANY) ! EXCEPTIONALLY QUIET OPERATION DUE TO LOWER OPERATING PRESSURE (50–60 DB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS OPERATION ! BACKGAUGE COMPONENTS MADE FROM ALUMINIUM CASTING ! BACKGAUGE WITH POWERFUL DRIVE MOTOR (1.0 KW) ! MACHINE TABLE MADE OF ROBUST, DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. Quieter operation. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimum cost ! Top performance only when really needed ! Main motor activated only via foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model -DA-66T- graphic/touchscreen * 2D graphical touchscreen programming mode * 3D visualization for simulation and production * 17" high-resolution color TFT display * Bend sequence calculation * Product programming and display in true scale * USB interface Gujdpoynnk Eofx Ahlef - CNC-controlled axes: Y1 - Y2 - X - R - Z1 and Z2, incl. CNC crowning - CNC electric-motorized backgauge (X axis) * On ball screw spindles * Travel path ... max. 750 mm * Travel speed X axis ... 350 mm/s * With 2x CNC-controlled stop fingers - CNC electric-motorized height adjustment (R axis) * Travel path ... max. 250 mm * Travel speed R axis ... 300 mm/s - CNC electric-motorized table crowning - ROLLERI gooseneck top tool "PS 135.85-R08", System "A" * Including quick-release system * Including crowning device in tool holder - ROLLERI segmented universal die block "M 460 R" * Including 1x die shoe "C 1050-R" - Rear safety device: light curtain - HAWE hydraulic components - FIESSLER AKAS laser safety system at front (incl. FPSC) - 2x front support arms with SLIDING system * Easy, tool-free height adjustment - FIESSLER movable double foot switch - CE marking / Declaration of Conformity

Būklė: naudotas, Gamybos metai: 1997, 2 vnt. krosninis alyvoje aušinamas transformatorius su perjungikliu; gamintojas – SGB, Vokietija; 28 MVA; 22 kV/430–150 V; 735–290 A–22 kV; 37600–42620 A–430–150 V, Dd1, OFWF, veikiantis, su dokumentacija, individualūs bandymų protokolai, pagamintas 1997 ir 1999 m. Gsdpfxjzt Nrys Ahlsuf

Būklė: naujas, Gamybos metai: 2026, Sraigtiniai kompresoriai, pagaminti Lenkijos prekės ženklo CORMAK, yra kokybės ir patikimumo garantija. Mūsų daugelio metų patirtis kompresorių pardavimo srityje leido mums sukurti modelius, pasižyminčius puikiu kainos ir kokybės santykiu. Šis modelis puikiai tinka nedidelėms dirbtuvėms arba mažoms gamybos įmonėms. Jis pasižymi dideliu našumu (950 l/min), atsižvelgiant į jo dydį, todėl galima vienu metu aptarnauti kelis įrenginius. Labai žemas triukšmo lygis (68 dB) užtikrina, kad buvimas toje pačioje patalpoje nebūtų varginantis. Dėl naudojamų aukštos kokybės komponentų kompresorius yra pritaikytas nuolatiniam darbui ir gali būti naudojamas pramonėje. „Energy Saver“ serija – tai pažangus sraigtinių kompresorių asortimentas, sukurtas siekiant žymiai sumažinti eksploatavimo išlaidas. Šiuolaikiniame pramonės sektoriuje, kuriame energija sudaro beveik 80 % suspausto oro sistemos priežiūros išlaidų, šie modeliai tampa standartu. Ieškote sprendimų, kurie viršija rinkos standartus? Sraigtiniai kompresoriai CORMAK yra inovacijų ir patikimumo sinonimas, sukurtas sudėtingiausioms užduotims. * Pažangi konstrukcija: mūsų kompresoriai yra pagrįsti pažangiomis inžinerijos technologijomis ir europietiška precizija. Tvirti komponentai, papildyti moderniais elementais, garantuoja ilgalaikį ir beproblemį darbą bet kokiomis sąlygomis. * Našumo optimizavimas: dėka VSD dažnio keitiklio technologijos ir pažangių algoritmų, LUFT 1000 VSD+PM dinamiškai pritaiko energijos sunaudojimą prie dabartinių suspausto oro poreikių. Tai reiškia, kad eksploatavimo išlaidos žymiai sumažėja, išlaikant maksimalų našumą. * Patikima pavara: LUFT 1000 VSD+PM kompresoriuje naudojama patikima tiesioginė pavara, kuri sumažina apkrovą ant sraigtinio bloko ir variklio, užtikrinant efektyvų darbą ir ilgą tarnavimo laiką. * Tylus darbas ir komfortas: mūsų kompresoriai, sukurti atsižvelgiant į detales, pasižymi ypač žemu triukšmo lygiu. Efektyvios triukšmo slopinimo ir vibracijos mažinimo sistemos užtikrina patogią darbo aplinką, o tai pagerina operatorių koncentraciją ir savijautą. Godpfx Ahezmf Auoljuf * Pažangi valdymo sistema: intuityvi elektroninė valdymo panelė, priklausanti MAM serijai, yra jūsų kompresoriaus valdymo centras. Ji leidžia tiksliai stebėti parametrus, planuoti techninę priežiūrą ir greitai diagnozuoti problemas, užtikrinant stabilumą ir apsaugą svarbiausiems komponentams. * Pritaikymas prie poreikių: suprantame, kad kiekvienas naudojimo atvejis yra unikalus. CORMAK kompresoriai gali būti komplektuojami su papildomomis oro apdorojimo sistemomis, o tai leidžia juos puikiai pritaikyti prie jūsų pramonės šakos specifikos. * Dinaminis darbinis slėgis: automatinis slėgio reguliavimas užtikrina, kad kompresorius tiektų būtent tiek suspausto oro, kiek reikia tam momentui, maksimaliai padidinant energijos efektyvumą ir sumažinant nuostolius. * Tvarus vystymasis: esame įsipareigoję diegti aplinką tausojančius sprendimus. Mūsų kompresoriuose naudojamos energiją taupančios technologijos ne tik sumažina jūsų sąskaitas, bet ir mažina poveikį aplinkai. Techninės specifikacijos Variklio galia 7,5 kW / 11 AG Įtampa 400V/50Hz Našumas 0–6 bar – vidutiniškai 990 l/min Našumas prie 6 bar – 990 l/min Našumas prie 8 bar – 950 l/min Našumas prie 10 bar – 950 l/min Išleidimo angos skersmuo (G) 1/2 colio Matmenys 900 x 600 x 1840 mm Svoris 268 kg

Būklė: naudotas, Gamybos metai: 2009, Speed / rpm Intake pressure / bar Weight / kg Total power requirement / kW Complete compressed air system – Screw compressor + Refrigeration dryer (Drypoint RA 500) + 2x Air receivers (each 3,000 l) Manufacturer: COMPAIR Motor power: 75 kW Model: LL80 7.5A Year of manufacture: 2009 Serial no.: CD1000057200 Control unit: Delcos 3100 Refrigeration dryer: Drypoint RA 500 Air receivers: 2x galvanized tanks, each 3,000 l – Total volume 6,000 l Load hours: 79,495 Gusdpfx Ahjud Iwzjlsf This compressed air system from COMPAIR offers a powerful and efficient solution for industrial applications with high air demand. Screw Compressor LL80 7.5A: The compressor, with a motor power of 75 kW, is robust, low-maintenance, and designed for continuous operation. Its advanced technology ensures a stable and consistent compressed air supply even under heavy load. Ideal for production facilities, workshops, or other industrial sectors. Delcos 3100 Control Unit: This intelligent control system provides easy operation, monitoring, and adjustment of the compressor. It ensures optimal performance, energy efficiency, and protection of the system against damage. Refrigeration dryer Drypoint RA 500: An integrated refrigeration dryer is essential for removing moisture from the air. This protects downstream machinery and tools from corrosion and extends the service life of the entire system. Air receivers – 2x galvanized tanks, each with a volume of 3,000 l: The two robust, galvanized tanks offer a large storage capacity totaling 6,000 liters. This keeps the air pressure stable and allows peak demands to be easily balanced. Galvanized receivers are especially durable and corrosion-resistant. Load hours: 79,495: The compressor has been regularly serviced and is in good technical condition. The high number of operating hours demonstrates its reliability and use in demanding production environments.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Sausas skirstomasis transformatorius, 1 vnt., 2000kVA, gamintojas SGB Vokietija, įtampos keitimas: 22000 (±2 x 2,5 %) /400V, Dyn1, IP31 arba IP00, Al/Al, temperatūros vertinimo blokas, veikiantis, darbinės būklės. Gjdpfx Aelpd Tcshlouf

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Dry-type, epoxy resin cast distribution 3-phase transformer by ALSTOM France, Harmony series, 1600 kVA, 21,000 V (± 2 x 2.5%) = (22,000-21,500-21,000-20,500-20,000) / 400 V; Dyn11 (or 5 or 1), IP00, PTC sensors, year of manufacture 2000, IEC losses, suitable for 20 kV, 21 kV, and 22 kV networks, total quantity: 1 unit; operational, in very good condition (very rarely used – served as emergency backup with diesel generator). Gedpfsq Evfgsx Ahlouf

Būklė: naujas, Gamybos metai: 2026, Naujas sausas, epoksidinės dervos užliejimu izoliuotas trijų fazių paskirstymo transformatorius, gamintojas TESAR Italija: 3 vnt. 400kVA, 2 vnt. 630kVA, 2 vnt. 1000kVA, 1 vnt. 1250kVA, 2 vnt. 1600kVA, 2 vnt. 2000kVA, 1 vnt. 2500kVA; 22000 (± 2 x 2,5 %) / 400V; Dyn1/5/11 (pasirinktinai), IP00, nuostoliai pagal Ecodesign 2, projekto dokumentacija, individuali protokolas, naudojimo instrukcija, neišpakuotas, 2 metų garantija, iškart prieinamas sandėlyje. Gedpfx Ashybc Nohleuf

Būklė: naudotas, Gamybos metai: 2006, Full drilling diameter / mm Drilling depth / mm Number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated systems for complete machining of long, heavy workpieces with the highest requirements for precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Pre-machining Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Gusdpfx Asuddimehlof Swing diameter over bed: 1,000 mm Chuck diameter: 900 mm Weight: approx. 47,000 kg Ideal for precision pre-drilling of deep holes – including faceplate, steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (stepped) Center distance: 11,000 mm Swing diameter over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tons Max. external diameter: 850 mm Perfect for fine boring, honing, and demanding finishing processes with up to 50,000 Nm torque. Your advantages at a glance - Complete solution from a single source – from pre-drilling to final machining - Large workpieces up to 11 meters and 10 tons - High process reliability due to perfect machine synchronization - Ready for immediate use, well-maintained, and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large part manufacturing

Būklė: naudotas, Gamybos metai: 2000, Faceplate diameter: 3,200 mm Swing diameter: 3,500 mm Turning height: 2,200 mm Dimensions (L x W x H): 7,730 x 6,240 x 6,700 mm Control system: Type 840 D sl Voltage: 3 x 400 V Frequency: 50 Hz Speed: 0.8 – 40 rpm Max. turning diameter: 3,500 mm Total power requirement: 51 kW Machine weight: approx. 86 t Technical Data Type of machine: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 (conventional) Completely overhauled and retrofitted with control system in 2010 Control system upgrade: 2016 Control: Siemens 840 D sl Condition: Very good Faceplate Turning diameter of faceplate: 3,200 mm Number of speed ranges for faceplate: 3 (infinitely variable) Speed ranges for faceplate: 0.8 – 40 rpm Stage I: 0.8 – 3 rpm Stage II: 0.8 – 11 rpm Stage III: 0.8 – 40 rpm Workpiece machining Max. turning diameter: 3,500 mm Max. turning height above faceplate: 2,200 mm Vertical slides Gedeuddcgspfx Ahljuf Minimum axis distance between vertical slides: 470 mm Maximum ram travel of left vertical slide: 985 mm Maximum ram travel of right vertical slide: 985 mm Feed rates – stepless feed max. X1,2: 3 m/min max. Z1,2: 2.5 m/min Ram not swiveling Cross rail Rapid traverse of cross rail: 600 mm/min Maximum distance from cross rail to faceplate: 2,300 mm Load parameters + Permissible turning force when machining workpieces with a turning diameter of 2,000 mm and a cutting speed of 20 m/min: 8,000 kg + Maximum chip section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for all tool slides: 45 mm² + Maximum chip section for steel workpieces Fz = 50 kg/mm² at a cutting speed of 20 m/min for one vertical tool slide, at maximum ram length 985 mm: 2.5 mm² + Maximum chip section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for all tool slides: 120 mm² + Maximum chip section for cast iron workpieces HB = 160 kg/mm² at a cutting speed of 20 m/min for one vertical tool slide, at maximum ram length 985 mm: 22.5 mm² + Maximum permissible workpiece weight at 0.8 – 3.15 rpm: 17,500 kg + Maximum permissible workpiece weight at 4 – 40 rpm: 7,500 kg Electric motors Power and speed of main drive motor: 51 kW Power of feed motors: – Vertical slide rail (2 units): 16 Nm (gear ratio 1:10) – Ram (2 units): 16 Nm (gear ratio 1:12) Power and speed of hydraulic pump drive motor (2 units): 3 kW – 1,500 rpm Power and speed of vertical carriage clamp hydraulics: 1.5 kW – 1,500 rpm Power and speed for cross rail adjustment: 15 kW – 1,500 rpm Compressed air supply Compressed air connection: 6 bar, oil- and water-free Energy consumption and conditions Voltage: 3 x 400 V Control voltage: 24 V Frequency: 50 Hz Main fuse: 315 A Main dimensions and weight of the machine Length: 7,730 mm Width: 6,240 mm Height: 6,700 mm Weight: 85,750 kg Tooling: Capto 60 interface Non-driven Front plate Turning diameter of front plate: 3,200 mm Clamping plate diameter: 3,400 mm Number of rotation stages for front plate: 3 (infinitely variable) - further speed ranges for front plate interrupted -

Būklė: naujas, Gamybos metai: 2024, Naujas sausas, epoksidu užlietas trijų fazių skirstomasis transformatorius, gamintojas TESAR Italija, 3500kVA, 22000 (± 2 x 2,5 %) /800V; Dyn1/5/11 (pasirinktinai), IP33 išorinis korpusas, naujas, nuostoliai pagal Ecodesign 2 lygį, projekto dokumentacija ir vienetinė protokolas, naudojimo instrukcijos. Gsdpfx Aozc R T Sehlsuf

Būklė: naudotas, Gamybos metai: 2011, Sausas (epoksidine derva užpildytas) trijų fazių paskirstymo transformatorius – gamintojas ABB, Saragosa, Ispanija, 800 kVA, 35/0,4 kV, IP00, Uk=6 %, Dyn1. TESAR, Italija, 1000 kVA, 35/0,4 kV, aliuminio apvijos, standartiniai nuostoliai, yra techninė dokumentacija, pilnai veikiantis. Gjdswiqczjpfx Ahleuf

Būklė: naujas, Gamybos metai: 2023, Nauji, sausi, epoksine derva užpildyti paskirstomieji transformatoriai, gamintojas „TESAR“, Italija, 1 vnt. 630 kVA ir 1 vnt. 1600 kVA, 20 000 (±2 x 2,5 %) / 400 V; Dyn1/5/11 (pasirenkama), IP00, pagaminimo metai – 2021 ir 2023, energijos efektyvumo klasė – 1 ir 2, projektinė dokumentacija ir individualios specifikacijos, instrukcijos, nepažeisti, nenaudoti, suteikiama garantija. Gsdopag H Rspfx Ahljuf

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 4 h, Funkcionalumas: visiškai funkcionalus, galia: 15 kW (20,39 AG), bendras svoris: 1 200 kg, bendras ilgis: 1 750 mm, bendras plotis: 1 200 mm, bendras aukštis: 1 640 mm, darbinis plotis: 630 mm, įėjimo įtampa: 400 V, valdymo spintos aukštis: 200 mm, valdymo spintos ilgis: 600 mm, valdymo spintos plotis: 600 mm, peilių skaičius: 15, sukimosi greitis (maks.): 100 aps./min, rotoriaus skersmuo: 260 mm, rotoriaus plotis: 630 mm, sietų perforacija: 15 mm, įvesties srovės tipas: Oro kondicionierius, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, Resource Shredder Chipper Wood Shredder Mulcher Shredder MHR630 ecoline Gusdpfx Ahjzt I Itjlof The MHR ecoline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-plug-in shredders impress with high performance, low energy consumption, and outstanding value for money. This makes the chippers ideal for craft businesses, recycling companies, and woodworking operations seeking a cost-effective yet powerful solution. The machines are manufactured at our facility in Germany and sold directly. Advantages - Continuous, uniform shredding process - High performance with low energy consumption - Includes Ecoringe - Robust construction - Larger feed opening - Excellent price-performance ratio - Ready for immediate use (5-pole CEE plug, 400V, 32A three-phase current) - Siemens PLC controlled - MHR630 ecoline_Ecoringe Rößler Resource Shredder "Made in Germany"

Būklė: naudotas, Gamybos metai: 2018, veikimo valandos: 7 293 h, bendras aukštis: 9 500 mm, bendras ilgis: 34 500 mm, bendras plotis: 14 550 mm, Pagaminimo data: 2018 m. Modelis: 10HM Drake Veikimo valandos: 7293 val. Minimalūs matmenys: 34500 mm x 14550 mm x 9500 mm „Siemens“ elektrinio variklio galia: 550 kW Darbinio veleno plotis: 1000 mm Konfigūracija: 10 plaktukų (3-2-3) (vieno plaktuko svoris: 105–117 kg) Guedjzmul Ejpfx Ahlef Galingumas: 14 tonų per valandą Magnetinis separatorius (skirtas plienui) – 2 vnt. Sūkurinio srovės separatorius (skirtas spalvotiesiems metalams) Būgninis sijotuvas Atsarginės dalys: Užsklanda, 3 komplektai plaktukų, smeigės, juostiniai konvejeriai, jutikliai, 6 vnt. sijų, pavarų dėžės Jei turite klausimų arba norite gauti daugiau informacijos, susisiekite su mumis.

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Clamping force: 2500 kN, clear tie bar distance: 630 mm/630 mm, opening stroke: 1150 mm, min. mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control: MC4. Machine dimensions: 5700 mm/2200 mm/2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner control zones, 4 core pulls, blow unit, accumulator, hydraulic tie bar puller, energy-saving circuit, ALS interface, 20mA interface, and colour dosing device interface. On-site inspection possible, documentation available. Guedsuiykdepfx Ahljf

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder from the year 2007, designed for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, SRF/RDF, and commercial waste. Previously part of a production line for LDPE-PCR film bales. In 2024, the production line was modernized and reconfigured. Successful tests for processing used pallets and cardboard cores have been carried out; processing of wood and cardboard cores is technically possible without issues. The machine’s condition has been documented by Vecoplan. Necessary spare parts for recommissioning have already been ordered. Sale is due to the dissolution of an internal department and the resulting realignment of processes. Rotor length approx. 2,000 mm. Hydraulic ram for consistent material feed. Flipper/airspring counter-knife system for high operational safety. Torque/HiTorc drive for high torque and energy-efficient operation. Replaceable reversible cutting inserts. Suitable for primary and secondary shredding. Output grain sizes depending on screen and material approx. 10–250 mm. High throughput and a robust, maintenance-friendly design. Inspection by appointment possible. Gusdey T Hbbepfx Ahlsf

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2016, Fuel: Natural gas (NG), Engine: HMG, Combined heat and power unit for space heating: Yes, Condensing boiler: No, Auxiliary heater: No, Low-temperature boiler: No, B11 boiler: No, Combi-unit: No, Nominal heat input P: 88 kW, Annual efficiency of space heating η: 136%, Energy efficiency class: A++, Usable heat output at nominal heat input with auxiliary heater switched off/on: 87.9 kW, Thermal efficiency at nominal heat input with auxiliary heater switched off/on: 57.5%, Electrical efficiency for space heating unit with CHP at auxiliary heater switched off/on: 33.5%, Auxiliary power consumption at full/partial load el: 1.132 kW, Standby power consumption P SB: 0.06 kW, Standby heat loss P stby: 0.442 kW, Annual energy consumption Q HE: 1345 kWh, Sound power level indoors L WA: 72 dB, Operating hours: 42,892 h. Water was found in the oil circuit, the unit has a fault with the oil despite sufficient oil being present, and it also shuts down with the display 'Engine too hot.' The control system was overhauled by the manufacturer in 2024, regular maintenance intervals were adhered to for oil changes, spark plugs, valves, etc. Documentation included. Gujdpfsxc Ni Rsx Ahlsf

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Platen dimensions (H × V): 1620 × 1500 mm Tie bar clearance (H × V): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Injection volume: 7,300 cm³ Shot weight (PS): 6,640 g Maximum injection pressure: 1,300 bar Screw length: 20 L/D Electrical & Hydraulic Equipment Rated pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1,300 l Machine Dimensions & Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system, which significantly increases energy efficiency for hydraulic injection moulding machines. The system controls the hydraulic pump motor via a frequency inverter, adapting the rotational speed to the actual demand during the production cycle. As a result, electrical power is only consumed when the machine actually requires it. Key Benefits: - Up to 30% reduction in electrical energy consumption - Hydraulic pump servo drive technology - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Available for retrofit on existing hydraulic injection moulding machines Gjdpfxoyugcts Ahlouf The ESS system enables a significant reduction in machine operating costs while maintaining full production performance.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Guedpfx Ajxzklqshljf Technical Specifications Clamping Unit: - Clamping force: 1000 kN – ensures high process stability - Rotary table diameter: 1300 mm – optimizes the production cycle - Usable mold mounting area: 800 × 590 mm - Minimum mold height: 300 mm - Maximum daylight between tables: 585 mm Injection Unit (3 interchangeable barrels): - Barrel Ø 30 mm: 83 cm³ at 2200 bar - Barrel Ø 40 mm: 140 cm³ at 1250 bar - Barrel Ø 20 mm: 36 cm³ at 2500 bar Additional Equipment: - 2 hydraulic core pulls – for complex mold handling - 2 pneumatic valves – for additional mold functions - GK controller – enables control of 3 heating zones directly from the machine - SELOGICA DIRECT control system – precise process control, allows programming of custom sequences Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is equipped with hydraulics comprising two energy-efficient variable-capacity pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine body, significantly reducing operating noise. Thanks to precise filters and a small oil volume, the oil change interval is extended to 20,000 hours. T2 technology with servo control features: - two variable displacement, adjustable pumps - programmable, adjustable and stabilized clamping force - programmable, manually adjustable nozzle contact force - ability to perform parallel movements (nozzle, ejector, cores) The machine also includes: - Additional system for continuous oil filtration and cooling (bypass circuit) - AES system – automatic main drive optimization, reducing energy consumption by dynamically adjusting pump speed to the machine load (for motors 15–75 kW, 380–480V, 50–60 Hz) Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a centering hole Ø 125 mm.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Details Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electro-hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and tube 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor by using a frequency inverter, which adjusts the motor speed according to the machine’s actual demand during the production cycle. This ensures that electrical energy is only consumed when actually needed. Main Benefits - Reduction of electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class and proven technology used in the plastics processing industry - Reduction of energy loss during machine idle time - Lower heating of the hydraulic system - Increased service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines Gedpfx Aoyugalohlouf The ESS system allows you to significantly reduce the operating costs of the machine while maintaining full production parameters.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Krauss Maffei Injection Moulding Machine KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of manufacture: 2004 Type: hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, disk drive station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight opening: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection throughput: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising System: - Version for thermoplastics with abrasion protection - Non-return valve + open nozzle ⚡ Electro–Hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank capacity: 720 l Godpfoyv E Nvox Ahleuf 👉 The machine is a very good candidate for ESS retrofit (energy savings up to 30–60%) 📐 Dimensions and weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m