Costa Levigatrici Šlifavimo Staklės pirkti naudotą (50 496)

Būklė: geras (naudotas), Gamybos metai: 1972, Staklės kreipiančiųjų šlifavimui WMW SFBZ 2200/6000 Pagaminta WMW, Vokietija, 1972 m. Pagrindiniai techniniai duomenys: Stalo matmenys: 2240x6000 mm Didž. šlifavimo plotis: 2200 mm Didž. šlifavimo ilgis: 6000 mm Didž. šlifavimo aukštis: 2000 mm Kjdpfx Asw U A Rmjn Uonb Didž. ruošinio svoris: 15 000 kg Staklių svoris: 130 t 2022 m. atlikta bendroji staklių renovacija. Maitinimo dėžės su elektromagnetiniais sankabomis buvo pakeistos varikliais ir reduktoriais abiems galvoms. Taip pat buvo pakeisti guoliai universalioje šlifavimo galvoje. Dėl daugiau informacijos susisiekite su mumis.

Būklė: naudotas, Gamybos metai: 1991, bendras aukštis: 2 100 mm, bendras ilgis: 4 200 mm, bendras plotis: 1 700 mm, Spalva: Žalia Tuščias svoris: 4.000 kg - Gamybos metai: 1991 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Valdymas: Konvencinis - Galia [kW]: 5,0 - Ašių skaičius [vnt.]: 3 - X ašies eiga [mm]: 1600 - Y ašies eiga [mm]: 500 - Z ašies eiga [mm]: 310 - Stalo plotis [mm]: 1730 - Stalo gylis [mm]: 320 - Magneto plotis [mm]: 1600 - Magneto gylis [mm]: 300 - Pagrindinio veleno galia [kW]: 5 - Parinktys: Skaitmeninis ekranas - Transportavimo matmenys: 4200mm x 1700mm x 2100mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 4000kg - Transportavimo paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/inv. pardavimas su skirtumo apmokestinimu: PVM atskaitomas įmonėms Pristatymas ir priėmimas mainais visada galimi visai pramonės įrangai Kedpfx Anjy Tug Ss Uenb Lukas van Rossum

Būklė: naudotas, Gamybos metai: 1994, maks. pravažiavimo aukštis: 160 mm, šlifavimo juostos ilgis 1 agregato: 1900 mm, maks. darbo plotis: 1350 mm, juostų skaičius: 2, 1 agregato: kalibravimo volas su grioveliais, guminis. 1 agregato tipas: grioveliuotas plienas. Šlifavimo juostos plotis 1 agregate: 1350 mm. 2 agregatas: kombinuotas šlifavimo agregatas. 2 agregato tipas: volas/bata. Valdymas: rankinis pultas. Elektros/pneumat. juostos osciliacija: pneumatinė. Įleidimo aukštis: fiksuotas (judama viršutinė dalis). Stalo pakėlimas: elektra varomas. Stalo indikatorius: mechaninis skaitmeninis rodmuo. Darbo aukštis arba padavimo stalo aukštis: 900 mm Sandėliavimo vieta: Nattheim Ksdpfx Ajy Naq Ujn Usnb

Būklė: labai geros būklės (naudotas), Automatinė šlifavimo mašina, skirta kietmetalio pjūklams, VOLLMER modelis CHP21H. Kedpfez Dr Uvsx An Usnb

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 250 mm Grinding length: 400 mm Centre height: 125 mm Control system: Fanuc 21i-T Machine serviced and partially overhauled. - New grinding spindle bearings - New X-axis spindle Kodpjvx Dvuofx An Uonb - Upper table re-ground - New table geometry - New geometry between WSS and grinding spindles B-axis with 1° Hirth serration Longitudinal positioning HF internal grinding spindle GAP control Paper band filter

Gamybos metai: 2015, būklė: naudotas, Workpiece diameter: 300 mm Kjdpfx Aexflcljn Uonb Workpiece weight: 999 kg Workpiece height: 145 mm Equipment features: - Digital readout for vertical axis - Automatic feed - Programmable automatic limit shut-off - Grinding spindle drive with infinitely variable electronic speed control - Infinitely variable cross feed and table rotation - 24V magnetic chuck, 300 mm diameter - Various occupational safety features, e.g., safety guard monitoring, operating status indicator via signal tower - Lubricating oil level monitoring - Machine was completely overhauled in 2015, including replacement of all electronics with PLC control and 24V control voltage - Special paper band filtration unit adapted specifically for this machine The following work has also been performed: - Replacement of bellows and belts - Grinding spindle newly mounted - Grinding carriage bed and rotary table bed hand-scraped for improved and more precise running characteristics - Grinding carriage and cross table removed from machine body, all guideways cleaned, lubrication system checked - Various wear parts, such as rubber caps and switching elements, replaced - Thorough functional check performed - Modernization of feed arm - Paint touch-up, machine color: Light grey RAL 7035 and RAL 7012

Būklė: naudotas, Gamybos metai: 2007, Šlifavimo ilgis: 600 mm Šlifavimo plotis: 400 mm Ruoinio aukštis: 375 mm Prižiūrėta ir iš naujo grandyta išilginė ašis Stiklinės liniuotės vertikalioje ir skersinėje ašyje Šlifavimo diskai: 300/50/76,2 mm Magnetinė prispaudimo plokštė: 600x400mm su laikymo jėgos reguliavimu Universalus popierinis filtro automatas UPF100 su 280 l talpa baku. Kjdsykmqvepfx An Ujnb

Būklė: naudotas, Gamybos metai: 2004, Šlifavimo skersmuo: 250 mm Šlifavimo ilgis: 650 mm Centru aukštis: 125 mm Staklės parduodamos su priežiūra ir nauja geometrija Iki šiol dirbta valandų: 12 260 Uodegė su tikslaus reguliavimo galimybe Knedpfx Ajywntysn Ueb Šlifavimo verpstės korpusas pasukamas su 5° Hirt dantytumu Popierinės juostos filtras Marposs matavimo įranga Vidinio šlifavimo įranga

Būklė: naudotas, Gamybos metai: 1990, Šlifavimo skersmuo: 200 mm Šlifavimo ilgis: 340 mm Centras ašies aukštis: 100 mm Valdymas: CNC Jungties galia: 25 kVA Ksdpfeywnt Hsx An Uenb Darbinė įtampa: 110 / 220 / 3x165 / 3x380 VAC Valdymo įtampa: 24 VDC

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Kjdpot Ii Nuefx An Uenb Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers Knodpfxet Ii Rrj An Ujb - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. New servo motors in the X-axis and for the workpiece headstock. Photo shows a previously delivered machine in original equipment. - Operation via the touch panel is extremely user-friendly. - The symbols on the control panel are virtually identical to the original control system, so no retraining is required. - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be expanded or modified according to customer requirements. - Option for spindle orientation of the workpiece spindle upon request. - New maximum infeed amount: 40 mm (can be further increased on request). - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding spindle stock (no height adjustment possible with spindle) - New, robust internal grinding attachment with 80 mm or 100 mm diameter, including height adjustment - Increase of centre height to maximum 225 mm - Speed control for the grinding spindle Includes: - Operating tools - Draw tube for chuck Additional accessories available on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external cylindrical and internal grinding, or for external, face and internal grinding of single workpieces in one setup. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine does not comply with the essential safety and protection requirements according to BetrSichV 2015 (German Occupational Health & Safety Regulation for the use of work equipment). Raising the required minimum protection level must be assessed by conducting a risk assessment according to BetrSichV. Ksdjuwv Idepfx An Uonb

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle display Available at extra cost. Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: Knsdpfxsuxftxo An Ueb - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) Knedpfeuxfucjx An Ujb - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy Knodpfx Anjuxfu No Usb *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Ksdpfxed Ih Dve An Uenb Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Available options at extra charge: - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m Kjdpjd Ih D Nefx An Ujnb As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding head swiveling: 180° ± Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed in steps: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Longitudinal table travel: 1530 mm Ksdpfxjuxftro An Uenb Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. (between centres, including clamping): 130 kg Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guideline Including new, modern and future-proof control system. Photo shown: Example of an already delivered machine with special options -The operation via the touch panel is extremely simple. -The symbols on the control panel are practically identical to the original controller, so no retraining is required. -Diagnostics function with display of PLC notifications and digital I/Os -Dressing function can be expanded or modified on request. -Spindle positioning of the workpiece spindle available on request. -New maximum infeed: 40 mm, can be extended on request. -Digital readout on 2 axes. X-axis resolution: 0.5µm Options: -Encoder with digital readout on workpiece headstock -Encoder with digital readout on grinding headstock (no height adjustment possible with spindle) -New robust internal grinding device, Ø80 mm or Ø100 mm -Increase of centre height up to 225 mm -Spindle speed control for grinding spindle Included: -Operating tools -Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid table traverse. Versatile application possibilities in production for external and internal grinding, or for external, face, and internal grinding in a single setup for individual parts. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Gauging control The machine currently does not comply with the basic health and safety requirements as specified in BetrSichV 2015. The required minimum safety target must be determined by a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm The machine was overhauled according to the Kellenberger inspection protocol and newly repainted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means the machine also received a completely new electrical system as part of this upgrade. Knedpsvq R Uzefx An Usb Machine equipped with a reinforced workpiece spindle head for chuck grinding of heavy workpieces. Currently, the machine does not meet the fundamental safety and protection requirements specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Raising the required minimum safety standard must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 2000, Šlifavimo disko skersmuo 500 mm Šlifavimo ilgis 1000 mm Centrų aukštis 250 mm Staklės buvo dalinai atnaujintos, įrengta nauja geometrija, ir naudotos tik kelias savaites, tačiau dėl įmonės bankroto buvo vėl parduotos. - Atlikta didžioji techninė priežiūra - Nauja stalo geometrija - Dalinai perdažytas interjeras Šlifavimo disko komplektas, KAIRĖS PUSĖS: 400x63x127 mm (standartinis) Šlifavimo disko komplektas, DEŠINĖS PUSĖS: 300x40x127 mm Vidinio šlifavimo įtaisas, skersmuo 120 mm, skirtas aukštos dažnio vėlei CNC valdymo sistema KELCO 120 C ašis, skirta neapvaliam šlifavimui. Kel-Poly B ašis: CNC valdoma B ašis KELCO 120: pastovus greitis 35 m/s arba 45 m/s Greitosios dažnio vidinis šlifavimo vėliavas Veikimo blokas, skirtas MFV ir MFZ vėliavams Hidraulinis grąžinimo mechanizmas, skirtas priekiniam laikikliui NĖRA mikroreguliavimo priekiniame laikiklyje Ksdpfsxzk Nijx An Uonb Spyruoklinis priekinio laikiklio įdėklas Viršutinio stalo aušinimas Standartinis detalių laikiklis MK 5 DIN 55026, 5 colių dydis Mikroreguliavimas, skirtas standartiniam detalių laikikliui Reguliavimo įtaisas ant apatinio stalo Aktyvi ilginių koordinatų nustatymo sistema KELPOS, MARPOSS, sumontuota ant šlifavimo galvutės Įrankių matavimo sistema KELSET, MARPOSS Pradinės padėties jutiklis MARPOSS Matavimo valdymo sistema MARPOSS Minialsar, paruošta Popierinis juostinis filtras

Būklė: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. BEMA Standard Equipment: Knodpfxod Ih D Ej An Ueb - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is CNC control: GE Fanuc 310is Hand panel for GE Fanuc CNC control Overhauled according to Kellenberger protocol Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Left grinding wheel: 500 x 80 mm Right grinding wheel: 400 x 63 mm Knodpoy U N Hiefx An Uob Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swivelling holder for PCD diamond plates Base module for KEL-TOUCH infeed sensor and KEL-BALANCE balancing systems KEL-TOUCH infeed sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH on the workpiece spindle stock for internal and external grinding Provisions for measuring controls Movomatic ESZ 400 or Marposs P7 ME Provision for external filtration system Coolant cut-off for tabletop devices Full enclosure for emulsion Emulsion mist extraction system Maintenance unit for pneumatic auxiliary functions Provision for KEL-VITA gantry loader KEL-POS, MOVOMATIC: C25 measuring probe Hydraulic preparation for steadies/steady rest (Arobo steady rest ready)

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo 350 mm Šlifavimo ilgis 1000 mm Centru aukštis 175 mm Valdymo sistema Kelco 90 Staklių svoris apie 6 t Parduodama atlikus funkcionalumo patikrą Pageidaujant už papildomą mokestį galima nauja stalo geometrija B ašis be pakopų Kjdpey R Ed Aofx An Ujnb Dešinės ir kairės šlifavimo ratų skersmuo 400 mm Vidinio šlifavimo įranga Galinis centras su tiksliu reguliavimu Sinusinis liniuotė prie WSS Kel-Set Pasyvus išilginis pozicionavimas Movomatic TMP91

Būklė: naudotas, Gamybos metai: 1997, Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Centros aukštis: 175 mm Mašinos svoris apie 6 t Pardavimas su funkciniu patikrinimu Pageidaujant – su nauja stalo geometrija už papildomą mokestį C ašis poligoniniam šlifavimui Kjdpfsy R Ed Njx An Ujnb B ašis su rankiniu pasukimu Kairiojo šlifavimo disko skersmuo: 400 mm Dešiniojo šlifavimo disko skersmuo pagal užklausą Vidinio šlifavimo įranga Kcentras su preciziniu reguliavimu

Būklė: naudotas, Gamybos metai: 1999, Šlifavimo skersmuo 350 mm Šlifavimo ilgis 1000 mm Centro aukštis 175 mm Valdymas FANUC 18i-TA CAPITALIAI ATNAUJINTA Nuotrauka panašios jau pristatytos staklės - Šlifavimo disko įranga KAIRĖJE 500 mm - Šlifavimo disko įranga DEŠINĖJE 400 mm - Vidinio šlifavimo įrenginys 120 mm diržu varomiems vidaus šlifavimo velenams (standartinis) Kodpfx Anoy U N Hps Ujnb - CNC valdymas FANUC 18i-TA - Paruošta kombinuotai Marposs matavimo kontrolei (Minialsar, Positionar) su E5N - B ašis - Kel-Set - Hidraulinis kotelio atitraukimas - Mikrorėguliavimas atatrankos mechanizme - Ruošinio veleno stovas su pasukamu pagrindu