Beco Beco pirkti naudotą (209)

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, Gamybos metai: 2000, galia: 315 kW (428,28 AG), bendras svoris: 3 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, mašinos/transporto priemonės numeris: Expander Typ OEE 23,2 315KW, Used expander/extruder, versatile application, suitable for use with both hydraulic counter-pressure slide gate and dies (e.g., shaping for feed production). The machine was purchased but unfortunately cannot be operated because our power supply is insufficient. Included: expander extruder with gearbox and drive unit, hydraulic slide gate (cone type, not plate type), rotary cutter, various dies, and hydraulic power pack with oil cooler. If required, the corresponding belt dryer is also available. Bwedpfovlwchsx Aa Djr Please send inquiries by email, thank you.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 5 000 mm, plėvelės plotis: 550 mm, produkto aukštis (maks.): 200 mm, gaminio plotis (maks.): 400 mm, gaminio ilgis (min.): 80 mm, Įranga: dokumentacija / vadovas, Shrink Film Packaging Line Manufacturer: Hugo Beck Model: Flexo 500 S Horizontal film packaging machine with side sealing for tubular bag film, consisting of a packaging machine followed by a shrink tunnel. The intermittent-motion tubular bag machine Flexo 500 impresses with maximum variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruit and vegetables, books, skis, laminate, or various household products – this machine has you prepared for any application, ideal for jobs that change daily. - Packaging Machine Hugo Beck Flexo 500 S, year of manufacture: 2003 Workpiece Dimensions: Width: approx. 55 - 400 mm Height: approx. 2 - 200 mm Length: from min. approx. 80 mm up to theoretically unlimited Consumables / Film: Center-folded film, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate: approx. 20 m/min Bjdpfjyw H Rksx Aa Dswr Rated voltage: 400/230 V, 50 Hz, 3-phase Rated current: 5 A Connected load: 3 kW Machine dimensions: approx. 2500 x 1500 mm (L x W) Weight: approx. 650 kg - Shrink Tunnel Hugo Beck Type HV 601, year of manufacture: 2002 Working width: approx. 600 mm Passage height: approx. 300 mm Continuously adjustable feed rate Chain rod conveyor, transport rods coated with silicone Temperature control via electric thermostat, separately adjustable top and bottom heat Heating output: approx. 4 - 12 kW Rated voltage: 230/400 V, 50 Hz, 3-phase Rated current: 19 A Connected load: approx. 12 kW Machine dimensions: approx. 2500 x 1100 mm (L x W) Weight: approx. 400 kg

Gamybos metai: 2026, būklė: naujas, Josan & Söhne ‼️NEW FEATURE – NOW WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing also available – with us you benefit from linear instalments, no increased final payment! Terms available: 36 months (rate factor 3.0694%), 48 months (rate factor 2.3697%), 60 months (rate factor 1.9456%). Genuine German quality, CE certified with EU conformity – available for live demonstrations. We recommend purchasing locally here in Germany: German warranty, compliance with German law, fixed prices, and German-speaking after-sales support for any issues. All these advantages apply exclusively to machines purchased from us. On-site quality inspections available by appointment. Live demonstrations available. ‼️Our latest, globally unique model – exclusively available from us in Heilbronn. Water-cooled for highly efficient, exceptionally clean copper granulate (99.7%). We are a German company, fully subject to German law. High quality with warranty and service. Our skilled, German-speaking staff (certified technicians) provide full support, also after purchase. Own fleet of trucks, service vehicles, prompt assistance and advice. Josan Recycling quality at an unbeatable price. See the equipment on site for yourself – don’t rely solely on pictures and videos. We operate our own granulation processes and provide live demonstrations. S600 with water cooling and fan – developed and assembled in Germany by us. We offer tailor-made solutions for small businesses, SMEs, start-ups, and large enterprises. Financing, hire purchase or leasing options available. Using our copper granulation systems, you can separate up to 99.7% pure copper from household, industrial, or telephone cables. The PVC fraction is also separated. The resulting plastic can be sold on to recyclers for further processing. Source local cables and produce copper. Recycle environmentally responsibly and conserve resources. Turn copper – and profit – with our recycling machines. Our equipment also separates copper/aluminium radiators: input ➡️ copper-aluminium radiator, output ➡️ copper and separated aluminium. Iron parts and screws are separated by the integrated magnetic belt (pre-shredding required). Become your own copper prospector (miner). Produce copper in an environmentally friendly way. Because we use our own machines daily, our systems are continuously upgraded, optimised for longevity, and always evolving. Maintenance, spare parts, modifications, expansions, etc. – our trained personnel are happy to help! Bsdpfx Aaowyx Rzs Dswr Granulation System S600 ➡️For cables from 1–40 mm ➡️Up to 500 kg/h input; with 50% copper content this means with 10 kg input, you recover 5 kg of 99.7% pure copper granulate that you can sell at top prices. ➡️Total connected load: 49 kW (excluding shredder) ➡️Including separation tables ➡️380 Volt connection ➡️Built in accordance with accident prevention regulations by a German company ➡️Magnetic belt included (for steel separation) ➡️Uncompromising quality: for control cabinet construction, only the highest quality Siemens components are used to protect your valuable machinery. ➡️System can be individually configured. We are happy to advise you. Price on request Subject to prior sale and errors. Images/description may vary.

Gamybos metai: 2026, būklė: naujas, ‼️NEW – NOW AVAILABLE WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing is also available through us! Linear payment schedule with no balloon payments! Term 36 months. Rate factor 3.0694% Term 48 months. Rate factor 2.3697% Term 60 months. Rate factor 1.9456% ATTENTION‼️ At the moment, machines from China are being offered on the portals. Most of the CE certifications are counterfeit. No EU conformity. The electrical systems are also not compliant in Germany. Several customers have contacted us, asking how these machines produce copper, as only shredded cable mix material comes out of their machines. We also tested these machines two years ago and can confirm the customers' observations: they do not yield pure copper. These machines are not authorized for operation in Germany! German quality - CE certified, EU-compliant, with live demonstration possible. Bsdpfx Aajp E Efco Dewr We recommend buying locally here in Germany. German warranties, German regulations, fixed prices, and German-speaking support in case of problems – all of this only applies to machines purchased from us. You are welcome to schedule a site visit to verify our quality for yourself. Live demonstration available‼️ We have shredders and other recycling machines in stock for all types of recycling at our Heilbronn facility! Here is our new, unique-in-the-world system – available exclusively from us in Heilbronn. Water-cooled. Highly efficient, producing clean copper granulate at 99.7% purity. We are a German company with German regulations. Excellent quality with warranty and service. Our German-speaking, certified technicians are available for later support if needed. Own trucks, service vehicles, and excellent immediate assistance and tips. You are welcome to inspect our machines onsite – not just photos or videos for purchase decisions. We granulate ourselves and provide live demonstrations as well. S300 with water cooling and fan – developed and assembled by us in Germany. With our systems, you can also separate copper radiators. Input: ➡️ Copper-aluminum radiators Output: ➡️ Copper and separated aluminum. Any iron parts and screws are also sorted via the magnetic belt. (Pre-shredder required) Because we also use our machines for copper recycling, our equipment is continuously being modernized, optimized for long service life, and further developed. Maintenance, spare parts, modifications, expansions, etc. – all available from our trained staff! From stranded cables, extension cords, automotive cables, telephone cables, NYM cables – everything can be recycled with our machines! Granulation Plant S300 ➡️ For cables from 0.1–40mm ➡️ Up to approx. 250 kg/h input, which means with 50% copper content you get 5 kg of 99.7% pure copper granulate out of every 10 kg, which you can sell at top prices. ➡️ Total connected load 24 kW ➡️ Separator tables included ➡️ 380 Volt connection ➡️ With safety inspection (UVV) performed by a German company ➡️ Conveyor belts included ➡️ Magnetic belt included (also separates steel) ➡️ Transport can be organized Starting net price €24,999.00 +19% VAT €4,748.81 Gross €29,748.81 Errors and omissions excepted.

Būklė: naudotas, Gamybos metai: 2003, x-travel: 760 mm y-travel: 290 mm z-travel: 370 mm Spindle speed: 60 - 4,200 rpm Table: 750 x 230 mm Quill stroke: 127 mm Bwjdot U Rm Ujpfx Aa Der Quill feed: (3) 0.04; 0.08; 0.13 mm/rev Feed range: 19 - 890 (x) mm/min Spindle taper: SK 30 Column overhang: 171 - 476 mm Total power requirement: 2.4 kVA Machine weight approx.: 0.95 t Space requirement approx.: 2.05 x 1.63 x 2.07 m The MF1 universal milling machine series impresses with its robust design and has become indispensable in many repair shops as well as training and production departments. The X-axis features a feed device with stepless adjustment, and the swiveling vertical milling head, with its wide, continuously variable speed range, is capable of machining steel and non-ferrous metals. Standard equipment includes both an automatic quill feed and a pneumatic tool clamping system, as well as a digital position display. ·Swiveling and tilting milling head with quill feed ·Pneumatic tool clamping system ·Continuously variable spindle speed ·X-axis feed with rapid traverse ·Comprehensive standard accessories

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 250 h, Funkcionalumas: visiškai funkcionalus, NSL 130-45B Shredder for sale in Poland Zerspaner NSL 130-45B, 45 kW, Rotor Ø 352 mm The single-shaft shredders of the NSL series are characterized by extremely robust engineering. Single-shaft shredders have become a standard solution on the market for wood waste in carpentry workshops and the wood processing industry. Reliability and solid technology make our machines an excellent choice for both industrial and workshop use. The cutting rotor, equipped with rotatable and replaceable cutting tools, ensures high shredding performance while maintaining economical energy consumption. Our shredders feature load-dependent pusher control to enable continuous shredding without blockages. The NESTRO shredder is supplied complete with control cabinet and a 5 m cable; the control cabinet is designed for wall mounting. Technical data: • Voltage / Frequency: 3-phase, 400 V / 50 Hz ±5 % • Drive / Power: 45.0 kW • Dimensions (L x W x H): 2,120 x 1,995 x 1,720 mm Bwodpfxjwbpcqo Aa Der • Hopper opening: 1,300 x 1,200 mm • Hopper volume: 1.9 m³ • Rotor Ø / Length: 352 / 1,320 mm • Rotor speed: 80 – 100 rpm • Throughput: 1 – 4 hopper volumes per hour (depending on material and screen perforation) • Number of cutting knives: 99 (30 x 30 mm) • Extraction nozzle: Ø 250 mm • Weight: 3,800 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1904P201, Gamybos metai: 2019, bendras ilgis: 1 950 mm, bendras aukštis: 1 790 mm, bendras plotis: 2 430 mm, įvesties srovės tipas: trifazis, bendras svoris: 1 500 kg, įėjimo įtampa: 380 V, įėjimo srovė: 16 A, įėjimo dažnis: 50 Hz, galia: 5,8 kW (7,89 AG), For sale is a BigRep PRO, which unfortunately hasn’t received the attention or usage it deserves in our facility and has become oversized for our current needs. We purchased the machine directly from the manufacturer, and it has been fully serviced and maintained by professional technicians from BigRep GmbH to ensure it is in excellent condition for the new owner. The only issue, as visible in the photos, is the pane of the left door, which we had to replace due to accidental damage. However, this is purely a visual blemish and does not impact the functionality of the machine in any way. The rest of the unit is still wrapped in the manufacturer’s protective film, as can clearly be seen – essentially in factory-new condition. Depending on the agreement, we can also provide a significant quantity of filament (approximately 15 large reels). The machine is available for inspection on-site by prior appointment. If you have any further questions or require more information, feel free to contact us directly. Bwodpfx Ajv In Hcoa Djr

Būklė: naujas, ašių konfigūracija: 1 ašis, krovimo vietos ilgis: 13 100 mm, krovinių skyriaus plotis: 3 100 mm, spalva: oranžinė, Gamybos metai: 2015, Buiscar vamzdžių priekaba / Beco Multi Functionel Heavy Duty priekaba • Keliamoji galia: 30 tonų • Išoriniai matmenys: 13100x3100 mm • Platformos aukštis: 2160 mm • Balno aukštis: 1800 mm • Tinka vamzdžiams nuo 700 iki 1600 mm Bodpjzblwpefx Aa Djwr • 3,5 colio kablys (galimas keitimas į 2'') • Naujos Good Year 235R25 padangos • 2x nuimami vamzdžių rėmai (reguliuojami) • 8 twistlock konteinerių užraktai 20 ir 40 pėdų ISO konteineriams • Jost reguliuojamos atraminės kojos • Stipri priekinė siena, aukštis 2000 mm • Peterson LED apšvietimas su 7 kontaktų jungtimi • Brėžinys pagal užklausą • Demo modelis, mažai naudotas! Būklė: Naujas Pagaminimo metai: 2015

Būklė: naudotas, Gamybos metai: 2023, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: SK03UT6P0097 / SK01TMFY3097, įvesties srovės tipas: Oro kondicionierius, įėjimo įtampa: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, year of manufacture 2023, original price €100,000. Its main advantage is the ability to digitize components without attaching targets to the part itself. This is possible because the scanner housing already includes targets, which are detected by the tracker unit. This measuring device is particularly suited for the fast digitization of large components, even several meters in size, while maintaining comparatively high accuracy. The device was calibrated upon delivery at an ISO 17025 accredited laboratory. We recommend having the manufacturer perform a calibration upon transfer of ownership. The scanning software is included in the offer. Additionally available are a touch probe for tactile point measurement on objects and a laptop. Application examples: - Digitization of manufactured components for subsequent metrological evaluation, e.g. as part of initial sample inspections - Digitization of objects/spare parts for downstream reverse engineering, e.g. for manufacturing a replacement part or design modifications - Digitization of large machinery systems and spatial areas for planning and simulation purposes - Digitization of vehicles for the tuning sector Technical specifications: 3 laser modes Scan rate: Up to 2,600,000 measurements/sec Volumetric accuracy: At 10.4 m³: Up to 0.049 mm At 28.6 m³: Up to 0.067 mm At 49.0 m³: Up to 0.089 mm Recommended part size: 0.1 m – 12 m Total weight with tracker case: 37 kg Total weight with scanner case: 21 kg Weight of tracker unit: 6.8 kg Weight of scanner unit: 1.75 kg Bwsdpfx Aow Id E Esa Dor The device can be inspected under power.

Būklė: naujas, ⭐⭐⭐⭐⭐ (5.0) 36 reviews ✈️ 25-day delivery ✈️ ⚡️ Top service ⚡️ Fast delivery ⚡️ Excellent support! ✅✅✅Energy efficiency class A+++✅✅✅ ✳️Maintain your liquidity! We offer a variety of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs.✳️ ✅MC 9 ► Number of filters: 9 ► Filter dimensions: 1850 mm x 160 mm diameter ► Suction capacity: 4,500 m3/h ► Electric motor power: 4 kW / hour ⭐ Offer price €5,550 plus VAT & shipping* ⭐ ✅MC 17 ► Number of filters: 17 ► Filter dimensions: 1850 mm x 160 mm diameter ► Suction capacity: 6,500 m3/h ► Electric motor power: 5.5 kW / hour ⭐ Offer price €6,550 plus VAT & shipping* ⭐ ✅MC 26 ► Number of filters: 26 ► Filter dimensions: 2500 mm x 160 mm diameter ► Suction capacity: 8,500 m3/h ► Electric motor power: 7.5 kW / hour ⭐ Offer price €8,550 plus VAT & shipping* ⭐ ❗❗❗Apply dozens of colors in your booth!❗❗❗ ► Do you want to reuse the sprayed paint? In this case, you must use different filters for each color in filtered booths. If you use a monocy-clone, you save on filter costs and can easily reuse the excess paint. ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocy-clone. This way, you don’t have to rely on different filters when using many different colors. ✳️Why choose a monocy-clone? ✨1 - According to environmental inspectors, it is the better choice. Because a monocy-clone does not require a duct connection. ✨2 - A monocy-clone increases occupational safety.⚠️ In the event of filter failure in filter booths, the exhaust air ducts can become clogged with powder coating. Such a blockage can cause a fire. Mono-cyclones prevent this risk. ✨3 - Green technology. ♻️ If you tap your filters in filter booths, overspray can be released into your coating shop. This contaminates your workshop, and paint particles pollute the air your staff breathes. The monocy-clone reduces environmental pollution in the paint shop and provides a better ecological environment for the health of employees and the environment. ✨4 - Enables fast color changes ⌛ This saves time and paint, as the booth is cleaned quickly. ✨5 - Economical ☀️ The monocy-clone bag filter does not require color changes. It is reusable thanks to its washable function. Bjdpoggx E Defx Aa Dewr ✍️✍️Order the monocy-clone suited for your current booth now. ⚡️⚡️⚡️Our monocy-clones come with their own control panels. They are supplied with 2 intake funnels, suction hoses, and connection clamps for linking to your existing filter booth. ‍⚕️‍⚕️‍⚕️ ►►You can easily install your monocy-clone by making 2 holes in the rear wall of your filter booth. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️All our machines are CE certified and we provide ATEX certification for relevant machines.☀️

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, New Arrival! From Federal stock, we offer you this top-quality incubator / warming cabinet, model B 5028 from the world-renowned brand "Heraeus". The B 5028 stands out due to its highly precise temperature control and minimal energy consumption. Thanks to its virtually indestructible quality and construction, it has become indispensable in any laboratory environment. With its extremely compact design, it is ideal as a benchtop unit and fits into even the smallest space; it can be electrically connected almost anywhere – power consumption is only 180 watts! Minimal temperature deviations are in accordance with DIN 58945 Part 1. Additionally, the unit is equipped with a timer, fresh air supply, and overload/temperature protection. The devices offered here all come from stock and have never been used – all components are in mint condition and free from damage – see pictures. Delivery will be made in a special wooden crate, including power cord and operating instructions. Technical data: Bjdpfsqv Avtsx Aa Dowr Temperature range: 10–70°C External dimensions (WxHxD): 510 x 540 x 450 mm Internal dimensions (WxHxD): 260 x 350 x 320 mm Usable capacity: approx. 28 liters Tested according to DIN 12880 Parts 1 and 2 Protection class 1 IP 20 Temperature limiter according to DIN 12880 Class 3.1 Shelves: 2 Weight: approx. 30 kg Shipping will occur via freight forwarding within three working days after receipt of payment. Alternatively, you may collect the unit from us during regular business hours. The total system weight, including accessories and pallet, is approximately 60 kg. Sale is exclusively to commercial customers; you will, of course, receive an invoice with VAT shown. Private buyers may purchase the device “on behalf of a customer”; a direct commercial sale to private individuals explicitly does not take place! The item is sold with no warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duty by the seller, nor for injury to life, body, or health.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, pirmoji registracija: 11/2024, Gamybos metai: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a good alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial number: GG 0326 Year of manufacture: 10/2024 System was dismantled because the current printing press it was installed in has been sold to Asia, where there is no interest in the system. Inline Measurement and Control System for Offset Printing Reduced setup times increase job throughput. Significant waste reduction directly lowers substrate costs. Additionally, the use of a measurement and control system further ensures production quality. Application areas - For sheet-fed and web offset presses with a production width of 52-205 cm - Measurement and control of process ink and spot colour densities - Monitoring of tone value increase, print contrast, and trapping parameters Customer benefits - Significant savings thanks to LithoDyn dynamic control - Minimal power consumption due to flashing LED - Clearly arranged, user-friendly interface - Definable print control strips - Effective contamination protection thanks to innovative glass/visor system - Long service life and low operating costs Measurement methods and sensors - Wear-free sensor system with integrated dust and dirt protection - Density measurement similar to ISO standard - Parallel measurement of all density channels across the entire printing width - Measurement of each sheet - 0/45° optics - Maintenance-free and long-life LED measuring light - Polarising filter Bwjdpfx Aoyrp Umja Dor - Measuring range 0.0 – 2.2 D - Use of existing print control strips possible - Selectable height, width, and configuration of measurement fields (min. size 3x4 mm) - Strip library for optional use of various print control strips - Reproducibility: 0.01 D depending on measurement conditions - Sheet feed up to 15 m/s Scope of delivery - Sensor crossbar - Control unit, industrial PC with 23" touch screen - For operation of necessary electrical and mechanical assemblies - Advanced Dust Protection (enhanced contamination protection) - LithoDyn (dynamic control) - LithoJobChange (dynamically managed job change) - LithoFlash One Shot (control at machine standstill) Of course, the system can also be installed in machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2011, veikimo valandos: 2 509 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 111313, bendras svoris: 520 kg, keliamoji galia: 15 kg, rankos pasiekiamumas: 2 800 mm, pasukimo diapazonas: 320 °, valdiklių gamintojas: FANUC, valdiklio modelis: R-30iA, teach pendant gamintojas: FANUC, valdymo spintos plotis: 800 mm, valdymo spintos aukštis: 1 360 mm, įėjimo įtampa: 400 V, įėjimo srovė: 20 A, įvesties srovės tipas: Oro kondicionierius, kartojimo tikslumas: 2 mm, This is a paint robot from Fanuc. It features a very special configuration. It was originally intended for coating wind turbine blades. For this purpose, it was mounted on a 60-meter-long rail, which included an additional rail enabling the robot to move up and down. Therefore, two large additional amplifiers are integrated in the controller. The encoder brake module is also duplicated for this reason. Another unique feature of this robot is that motors are installed in the shoulder to control two gear pumps, making 2-component mixing on the robot effortless. Bwodpotu Hpqefx Aa Djr The robot was never actually put into operation. The operating hours accrued solely because the robot remained powered. The system operators (Enercon) have confirmed this. The actual Servo ON time is only 0.2 hours. The robot shows minor signs of contamination but is practically in mint condition. Unfortunately, the teach pendant and teach cable are heavily soiled, but they can be replaced if required. The cable length between the robot and the controller is 5 m and features a plug-in connection at the controller – another special feature. We provide a 1-year commissioning warranty. We can assist with transportation and installation. The robot is secured together with the controller on a special pallet measuring 2500x800x1600 mm, ready for transport. We have two units available; the price applies to one robot. It is currently configured as a right-arm/right-hand unit, but this can be easily converted without mechanical modifications. The unit can be viewed under power at Paintrobotics.

Gamybos metai: 2005, būklė: naudotas, Funkcionalumas: ribota funkcionalumas, Fischer / Stocker electric recirculating oven with blower, year of manufacture 2005, optimized in 2022/23, including: - Additional insulation with cladding - Siemens control system with program selection and memory - Temperature-resistant fan shaft, including lowering of the fan unit within the chamber - Additional installation of 3 x 1.5kW heating elements Connected load: 45kW Increased heating capacity from originally +250°C to +450°C Fully extendable push-in floor Bjdpfxsyx H Swj Aa Dswr Installation dimensions (L x W x H): 3,100mm x 2,750mm x 2,900mm (including attachments) Usable internal chamber dimensions (L x W x H): 2,500mm x 1,700mm x 1,500mm Originally used in the production of GRP aerospace components, purchased second-hand by us in 2020 and adapted/optimized as per the above details for the purpose of curing/thermosetting coatings. However, due to changing project requirements, the oven quickly became too small for our needs and was never put into operation! Ideal for electrostatic and/or wet paint applications, tempering or special processes! Electronically fully functional and thus immediately ready for operation, but due to the prolonged storage, partial repairs of the sealing bonds (cladding) and door seals will likely be necessary! Price quoted ex works, net, negotiable!

Būklė: geras (naudotas), Feutron temperature test chamber -40 to +100°C The Feutron TPK 3403/125 is a workhorse for standardized temperature testing due to its robust construction. The main areas of application for this model are: 1. Electronics and component testing This is the most common application. It focuses on how components react to extreme temperatures: - Functional testing: Does the circuit board still work flawlessly at -40°C or +150°C? - Burn-in tests: Artificial aging of components by continuous operation at high temperature to provoke early failures. 2. Material testing Examining physical changes in materials: - Brittleness: Do plastics or rubber seals become brittle in the cold? - Deformation: Do composites warp when exposed to heat? - Storage tests: How stable are chemicals or adhesives over long periods at constant temperature? 3. Quality assurance (QA) - Spot checks: Series-accompanying tests to ensure that production stays within the specified temperature ranges. Bwsdpfoy Nynajx Aa Dsr - Compliance testing: Tests according to common industrial standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development - Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power supply: 220/280V-3-50Hz Fusing: 25 A Degree of protection: IP 20 Weight: 480 kg "All from a single source: We are happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Būklė: naujas, Gamybos metai: 2025, Folding Machine ZGR 2140mm/0.8 mm incl. Rotary Shear Prod-Masz is a local manufacturer and the European standard for sheet metal working machines. Our range includes accessories for folding benches, guillotine shears, beading machines, angular gauges, seam closers, and many other devices for sheet metal processing. Thanks to modern solutions and great passion, we have become a professional support for many manufacturers and workshops. The machines offered by Prod-Masz are a symbol of ergonomic design and work efficiency. Technical Data of the Folding Machine: - Max. working length: up to 2140 mm - Maximum steel sheet thickness: up to 0.8 mm - Titanium-zinc sheet: 0.8 mm, aluminium sheet: 1.2 mm, copper sheet: 1.2 mm - Max. daylight opening between uprights: 80 mm - Weight: approx. 180 kg - Max. bending angle: 145 degrees - Bending beam thickness: 15 mm - Top beam lift in three positions - Cutting with the rotary shear along the entire working width - Rotary shear (max. cutting capacity: 0.8 mm / steel) - Degree scale, angle stop, knurled screws, front cutting limiter, front and rear frame - The machine complies with CE regulations and comes with a 12-month warranty Delivery cost: €180 Rotary shear included in the price Manual seam closer: €75 extra Bwodoctui Repfx Aa Djr Delivery time: every week Cash on delivery available We look forward to hearing from you!

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: AB2024, skylaser marking laser – CO2 laser engraving/machine / marking laser is the complete solution for your complex laser engraving, laser marking, and laser coding applications. Important: Compare the installed components in the offered laser systems: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, and cabling – all components are exclusively German-made! Our laser systems are manufactured 100% in our Plauen factory according to your specifications. Competitors often use Chinese components (it starts with the controller – EZCAD = Chinese origin!). (* Prices vary depending on equipment; this is a brand-new laser machine manufactured by us.) Our skyLaser Mark series are used exactly where conventional CO2 laser technology reaches its limits. With a customizable, mobile worktable, the system’s flexibility is increased. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skylaser MARK systems deliver precise and permanent marking (laser marking/laser engraving) and are suitable for specialist laser applications on metals and organic materials. A wide range of fonts, the application of barcodes, serial numbers, logos, and images can be achieved effortlessly. Thanks to excellent resolution, nearly any marking requirement can be met. The software is extremely user-friendly; even very complex and intricate marking tasks can be set up easily on the included industrial PC. Exact positioning is accomplished quickly and easily using the integrated positioning laser. Because the system contains virtually no wear parts and, thanks to IPG Photonics (IPG Laser GmbH) fiber laser technology, is nearly maintenance-free, it’s suitable for industrial applications and continuous operation. - Working area: 110x110 or others, e.g., 175x175 mm (F-theta lens dependent), optional - Laser source: IPG laser, others available upon request, depending on application - Laser output: 20W / optional 30W / 50W - Software-controlled precision axes for worktable (X, Y, Z axes) Bedpfe Sd Trsx Aa Dswr - Z-axis travel: max. 200 mm - Marking speed: up to 8,000 mm/s - Redundant safety system - System laser class: 1 - Scanlab SCANcube for perfect results - PFEIFER technology industrial PC incl. preinstalled control software - Positioning laser: integrated diode laser for optimal alignment - Optional: camera positioning, 3D machining, database integration - Virtually maintenance-free

Būklė: beveik kaip naujas (parodų įrenginys), Cable protection conduits made of fiberglass, available in 4 sizes and 6 m lengths. Bwedob Nxc Tspfx Aa Der The conduits were developed and manufactured in 1995 for a new water pipe system, which unfortunately did not become established on the market. Available dimensions: Outside diameter: 16, 20, 25, and 32 mm.

Būklė: naudotas, Gamybos metai: 2018, Overview The packer was manufactured and commissioned by the German company Sema Maschinenbau GmbH in 2018. Until now, it was used in a filling line for fresh milk in glass bottles at a German dairy operation. The line had a capacity of 7,700 bottles per hour. Due to increased demand for milk in glass bottles in recent years, the owner decided to purchase a new system with higher capacity. As a result, this machine has become available. The machine is in very good condition, as it is still relatively new and has only a low number of operating hours. Technical Data: - Output: 695 crates (with 12 bottles each) per hour - 1333 crates (with 6 bottles each) per hour Bedpsl Hx Dmofx Aa Dowr - Configuration: 2x3 (1L bottle), 4x6 (0.5L bottle) - Gripper heads: for wide-neck bottles (can be adjusted)

Būklė: naudotas, Gamybos metai: 2013, Overview   This isobarometric filling machine was manufactured in 2013 by the Slovenian company VIPOLL. The filler is available because it was replaced by a larger machine. It has very few operating hours and can be inspected in person at any time.  Technical Details   Capacity: 3,000 bottles/hour (adjustable)  Number of filling valves: 12 valves  Number of crown cappers: 3 heads  Counterpressure filler with double pre-evacuation  Currently set up for 330 ml longneck bottle  Total operating hours: less than 1,000 hours  Direction of rotation: right to left  Filling valves: mechanical electropneumatic  Mechanical height adjustment  Bodpfotm Hv Tex Aa Djwr

Būklė: naudotas, Gamybos metai: 2007, Overview The solo screw capper was manufactured and commissioned by Adelski in 2007. The machine has so far been used in a winery in Germany. The machine is now available because the products previously filled on this line have been moved to another filling line. The scope of delivery includes the solo screw capper itself, the cap feed system, and the sorting unit. The screw capping elements will remain at the production site, as they are used in another machine. Upon request, we can offer suitable screw capping elements. Technical data: Capacity: up to 12,500 bottles/h Number of capping heads: 5 Working direction: counterclockwise (left-right) Control system: Siemens S7 Accessories: Pneumatic cap feed system Cap orientation system for long caps Cap conveyer track for long caps Bwodol Hx Awspfx Aa Djr

Gamybos metai: 2000, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Laroche Airlay web-former for short fibre web formation. It produces webs intended for needlepunching or thermal bonding for mattress manufacturing, underlays, insulation, and automotive applications. On your line, the 2,400 mm working width covers cover, felt, and geotextile formats without prior cutting. The integrated weighing table continuously stabilizes the basis weight, and the installed power of 51 kW maintains throughput even with dense fibres. Bjdpfxsy Urmls Aa Djwr Detailed product description Laroche textile machine for nonwoven web forming Designed for processing short and coarse fibres, this Laroche Airlay web-former produces webs for needlepunching or thermal bonding. It is suitable for mattress production, underlays, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. In practice, a well-maintained used machine offers real production flexibility across several markets, minimizing changeover times. Production features and basis weight control The 2,400 mm working width covers standard blanket, insulation, and geotextile sizes, reducing the need for recutting at the line's end. What truly enhances production is the integrated weighing table: it quickly corrects basis weight deviations and limits waste both at startup and during steady operation. The installed 51 kW power ensures stable operation when material loads become uneven or denser. The speed, up to 10 m/min, can be adjusted depending on the web weight and fibre type, allowing efficient trade-offs between hourly output and web consistency. Production versatility and textile recycling Adjustable web weights from 500 to 1,500 g/m² cover light underlays, heavier insulation felts, and mattress components. On your line, this range prevents the need for a dedicated machine for each product family and reduces internal transfers. The machine handles both natural and recycled fibres. On a nonwoven line, I recommend this type of web-former when you need to accommodate raw material variations while maintaining a web suitable for downstream consolidation. Sectors served: textile and nonwoven This web-former meets the needs of mattress and bedding production, footwear and garment underlays, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. The main consideration is the compatibility between your fibre blend, target basis weight, and the consistency required downstream. The 2,400 mm width and adjustable web weight make this equipment ideal for a workshop seeking versatility without added operational complexity. What you won’t see on the specification sheet is that such a setup also streamlines medium-sized production runs, allowing for efficient changeovers between applications with minimal downtime.

Būklė: naudotas, No. 3245 Order Picking Trolley / Paint Drying Rack Reinhold Beck Maschinenbau Trapez Used, good condition Total of 16 units available For space-saving storage until further processing Suitable for painted panels, battens, or profiles Shelf width: 500 - 2000 mm Shelf depth: 510 mm 15 levels, covered with rubber or foam Distance between levels: approx. 78 mm Load capacity per level: 40 kg (total 600 kg) Mobile, partially with brakes Caster wheels available in different designs Transport dimensions approx. 800 x 700 x 1850 mm (LxWxH) Weight approx. 90 kg Sale on behalf of customer, ex-location near 73430 Aalen, without disassembly, transport, or installation Disassembly, loading, and transport by us available as an option Description and price subject to change To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale is as is Technical data, condition description, year of construction, and scope of delivery according to manufacturer prospectus or previous owner, without guarantee Subject to prior sale No warranty is provided for used machinery. Sale as seen and inspected Bwjdoxpilxjpfx Aa Der Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or dispatch Delivery terms: ex location

Gamybos metai: 2020, būklė: naujas, A fully automated film rewinding machine according to GMP guidelines. Film Rewinding Machine Type FUM-900 CP This film rewinding machine is designed to rewind film rolls that have become misaligned or have not been wound with the correct winding tension during production on large-scale installations, thus preparing them for further processing. It has been developed in accordance with specific pharmaceutical standards and is intended for processing PVC film. Advantage of our machine: Thanks to two separate drives, we can ensure both right-hand and left-hand winding directions. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: Product-contacting: 1.4301 / acrylic Performance: up to 120 m/s Speed: steplessly adjustable Film roll diameter: max. 450 mm Bwsdpfofwfpbsx Aa Der Connection: 230 V / 50 Hz Drive: DC 0.25 kW

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Two Beck MPX 240T units are available. Control panel: Siemens SIMATIC OP7, with documentation. On machine 1, the Teflon coating of the sealing blade is partially damaged and needs to be replaced. On machine 2, the sealing blade may need to be replaced, as well as the fan cover on the control cabinet. An on-site inspection is possible. Bedpjwal Igefx Aa Djwr