Zopf Zb 60 Md pirkti naudotą (22 265)

Būklė: paruoštas naudoti (naudotas), Indramat MDD071C-N-060-N2L-095GB0 Permanent Magnet Motor, SN: MDD071-3921, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Gjdpfxei D Iuko Aa Ujit

Būklė: paruoštas naudoti (naudotas), Indramat MDD093B-F-060-N2L-110GL0 Permanent Magnet Motor, SN: MDD093-6062, used, normal signs of wear, fully functional, scope of delivery as shown in the photos. Gisdpfoi D Iv Tox Aa Uet

Būklė: naujas, tuščias svoris: 800 kg, didžiausias leistinas svoris: 2 700 kg, bendras svoris: 3 500 kg, krovimo vietos ilgis: 3 600 mm, krovinių skyriaus plotis: 1 800 mm, krovos erdvės aukštis: 350 mm, padangos dydis: 195/50r13c,

Būklė: naujas, tuščias svoris: 680 kg, didžiausias leistinas svoris: 1 920 kg, bendras svoris: 2 600 kg, krovimo vietos ilgis: 3 060 mm, krovinių skyriaus plotis: 1 800 mm, krovos erdvės aukštis: 350 mm, padangos dydis: 165r13c,

Būklė: paruoštas naudoti (naudotas), Fanuc A06B-0247-B805 AC servovariklis SN: C02ZB1002 + Pulscoder A860-2010-T341, naudotas, geros būklės, 100% veikiantis, pristatymo apimtis pagal nuotraukas. Godpjx Dt Hiefx Aa Uoit

Būklė: paruoštas naudoti (naudotas), Mitsubishi Electric RV-7FM-D1-S15 pramoninis robotas SN: FG606002R – smulkūs pažeidimai oro jungtyje, naudotas, geros būklės, 100% veikiantis, komplektacija pagal nuotraukas. DĖMESIO: dėl pakuotės ir pristatymo išlaidų prašome teirautis atskirai! Mūsų parduotuvėje taip pat siūlomos šios dalys: valdymo blokas „Mitsubishi CR750-07VD1-1-S15“ / prijungimo kabelis „BKO-FA0741H05-D“ / prijungimo kabelis „BKO-FA0739H05-D“. Gijdpfxex Dw Nzs Aa Uet

Būklė: naujas, Nominal capacity: up to 3,000 kg/h Electrical connection: 3.5 kW 400V 50Hz (3-phase) Electrical protection: 16 A slow-blow Dimensions: Length: 3,720 mm Width: 1,730 mm Height: 2,110 mm Discharge/infeed height: 1,430 mm Belt width: 660 mm Feed width: 220–440 mm Gjdpfx Aaodix I Ue Uoit Feed height (continuously adjustable): 10–40 mm Weight: 2,200 kg Material: 1.4301 / AISI 304 Juice yield: up to 80% (depending on fruit type) Belt speed: 1.2–4.5 m/min Contact time: 1.4–4.2 min Water consumption for cleaning: 10 l/min (with continuous washer operation) Connections: Wastewater connection: Ø 75 mm Juice outlet connection: DN 25 Juice outlet height: 130 mm Wastewater outlet height: 50 mm Pulp discharge height: 810 mm Suitable for pome and stone fruit Scope of delivery: High-pressure cleaner, compressor Including powered brush rollers (top and bottom)

Gamybos metai: 1987, būklė: labai geros būklės (naudotas),

Būklė: naujas, Gamybos metai: 2026, Horizontal Bending Machine T 1000 Multiprogram - Manufacturer: ZOPF - Year of manufacture: 2024 - Like new, used only for testing purposes - Equipped with semi-automatic control - Supplied with punch and die - Pressing force: 100 tons at 280 bar - Shaft diameter: 105 mm - Infinitely variable stroke adjustment: 0-300 mm - Adjustable working speed: - Working stroke max. 10 mm/sec. Gisdpfx Aaeg Anurs Uet - Return stroke 20 mm/sec. - Hydraulic pressure infinitely adjustable - Maximum tool height: 300 mm - Motor power: 10 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Enclosed table - Replaceable wear plate - Table dimensions: 1427 x 744 mm - Weight: 2300 kg - Colour: RAL5012 / RAL7015 - Bending capacities: - Flat material: 300 x 25 mm (with V160 die) - Flat material: 300 x 32 mm (with V200 die) - Straightening capacity: Wcm³ 800 with roller support distance 1500 mm - Round tube: 3/8" – 3"

Būklė: naujas, Gamybos metai: 2025, Hidraulinis horizontalus lyginimo ir lenkimo presas - Gamintojas: ZOPF - Modelis: T 1000 - Presavimo jėga: 100 t - Su pusiau automatiniu valdymu Valdymas (99 programų po 16 žingsnių) Įsk. lenkimo kaištį (be štampo) Įsk. įrankių laikiklį matricȯms ir pakojo pedalą - Linijinio poslinkio reguliavimas be žingsnių 0–300 mm - Darbo greitis reguliuojamas Darbinis eigos greitis maks. 10 mm/sek. Atbulinė eiga 20 mm/sek. - Hidraulinio slėgio reguliavimas - Maksimali įrankio aukštis 300 mm - Variklio galia 7,5 kW - 400 voltų, 50 Hz, 3 fazės - Darbinis aukštis 940 mm - Uždarytas stalas - Keičiamoji dilimo plokštelė - Svoris 2300 kg - Lenkimo galimybės: Gedexpf R Dopfx Aa Ujit Plieninė juosta 300x34 mm, Vmax 200 mm Apvalūs vamzdžiai 3/8" - 3"

Būklė: naujas, Gamybos metai: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - NC control system - includes bending pin - includes tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely variable stroke adjustment - Adjustable working speed Max. working stroke: 10 mm/sec Return stroke: 20 mm/sec - Adjustable hydraulic pressure Gijdpfx Ajqvm Uksa Uet - Maximum tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table - Weight: 1,000 kg - Bending capacity: Flat material: 150 x 22 mm Round tube: up to 60 mm

Būklė: naujas, Gamybos metai: 2026, Horizontal bending machine T 300 Multiprogram - ZOPF - with semi-automatic control - NC control (99 programs with 16 steps each) - incl. bending pins (without dies) - incl. tool holder for dies and foot pedal Gijdefh Tntopfx Aa Ust - Pressing force 30 tons - Stroke adjustment stepless from 0–250 mm - Working speed adjustable Maximum working stroke: 10 mm/sec Return stroke: 20 mm/sec - Hydraulic pressure adjustable - Maximum tool height: 250 mm - Motor power: 3.0 kW - 400 Volt, 50 Hz, 3 phase - Working height: 900 mm - Closed table - Interchangeable wear plate - Weight: 950 kg - Colour: RAL5012 / RAL7015 - Bending capacities: Flat material: 200x20 mm Round tube: 3/8" - 2"

Gamybos metai: 1973, būklė: labai geros būklės (naudotas), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, without obligation and subject to prior sale and errors, the following from stock: W E I L E R Precision Mechanic Lathe Model MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning diameter over cross slide 140 mm Max. swing over bed 260 mm Distance between centres 500 mm Spindle bore 28 mm Giedpfx Aasxpxqws Ust Speed range – Setting 1: 220–1,800 rpm Speed range – Setting 2: 110–3,600 rpm Spindle drive kW Total drive kW - V - Hz Weight 500 kg Accessories / Special equipment • Equipped with a 3-jaw chuck by RÖHM 110 mm diameter, mounted • Machine base with integrated tool storage and comprehensive accessory package, including collet sets Condition : very good – ready for demonstration, ideal for training workshops, maintenance, etc. Please click here for a video of the machine: MDU260/4 Delivery : ex stock – as inspected Payment : strictly net on collection – after receipt of invoice

Būklė: naujas, Our SAPI pressure blasting unit type "Mammut" with a 60-litre tank capacity is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit also features a permanently mounted water separator, which extracts moisture from the compressed air and thus prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety shut-off system is included. This allows starting and stopping of the blasting process via an operating lever mounted on the blasting hose. Delivery includes: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off system Gijdpfx Aewc Afhja Uet Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed 1" piping, internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 l - Overall height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT WITH SAFETY SHUT-OFF: - Extremely fast switching on and off times, complying with industrial safety regulations (VBG 48) - Pressure setting can be fine-tuned accurately prior to blasting, infinitely adjustable from 0.1 – 12.0 bar - Lower blasting media consumption, as the pressure vessel remains constantly pressurized and thus no unnecessary media run-on occurs - Upon restarting, full blasting pressure is immediately available at the nozzle, eliminating delay; this results in significantly lower media consumption and reduced wear on the blasting hose - No moisture formation (condensate) in the vessel, as it remains continuously pressurized, avoiding ventilation during each start and stop; this procedure offers additional benefits: - Optimal blasting media dosing with hardened fine adjustment valve - Reduced compressed air demand, significantly lowering fuel (diesel) consumption - Single-person operation, as the vessel pressure is continuously displayed and can be conveniently adjusted via the pressure gauge without prior startup - No failure-prone components such as control valves, membranes, or seals, resulting in high operational reliability and low maintenance. Only the hose in the safety shut-off needs to be inspected and replaced if necessary.

Būklė: naujas, Gamybos metai: 2023, Horizontal bending machine AH 20 NC, 1000 mm back gauge - ZOPF make - with semi-automatic touch control - NC control - incl. bending pins Godpewyt Tqsfx Aa Ujit - incl. tool holder for dies and foot pedal - Pressing force: 20 tons - Infinitely adjustable stroke setting - Working speed adjustable Max. working stroke: 10 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 150 mm - Motor power: 2.2 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table design - Weight: 800 kg - Bending capacities: Flat material up to 150x12 mm Round tube up to 48 mm - Bending pressure: 20 tons - with controlled back gauge, 1000 mm - with tools - 400 Volt, 50 Hz, 3-phase

Būklė: naujas, Gamybos metai: 1994, Solid round material 30 mm Solid square material 30 mm Flat steel 50 x 10 mm Shaft diameter 30 mm Working speed 6.0 rpm Roller diameter – tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Space requirement approx. 0.6 x 0.8 x 1.3 m Profile bending machine equipped with: - 1 set of standard rollers - 2 rollers are driven Giedpfx Aajwrzr Es Uot - Can operate horizontally or vertically

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Horizontal bending machine hydraulic Zopf - Model T 200 - Year of manufacture: 2024 Gsdpfxsdy Igzj Aa Uoit - Demonstration machine - Stroke length: 185 mm - Weight: 450 kg Bending capacity for flat steel ST 37 up to 200x12 mm (with appropriate tooling) Including punch R 5 and die V 63 mm Including mechanical length stop Digital display with programmable stroke Demonstration machine

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Horizontal bending machine hydraulic Zopf - Model T 200 with stop - Programmable length stop 900 mm Giodpfxjgrydbe Aa Uot - Year of manufacture 2023 - Demonstration machine - Stroke length 185 mm - Weight 500 kg Bending capacity for flat steel ST 37 is 200x12 mm (with suitable tooling) with punch R 5 and die V 100 mm

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Hydraulic Horizontal Straightening and Bending Press - Manufacturer: ZOPF - Model: T500 with straightening beam, 1,500 mm length - Press force: 50 tons - With semi-automatic control (99 programs, each with 16 steps) - Includes bending pin (without punch) - Includes tool holder for dies and foot pedal - Infinitely adjustable stroke range: 0–300 mm - Adjustable working speed Working stroke max. 10 mm/sec Return stroke 20 mm/sec - Adjustable hydraulic pressure Gedpfxsdk H A Ij Aa Ueit - Maximum tool height: 300 mm - Motor power: 5.5 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed table - Exchangeable wear plate - Weight: 1,300 kg - Bending capacities: Flat material: 300 x 15 mm Flat material (vertical): 60 x 15 mm Round tube: 3/8" – 2 1/2"

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Horizontal bending machine hydraulic Zopf - Model T 100 digital - Year of manufacture: 2025 - Demonstration unit - Stroke length: 200 mm - Weight: 320 kg Bending capacity for flat steel ST 37 up to 150x10 mm (with suitable tooling) with punch R 5 and die V 63 mm including mechanical length stop Gjdpfjdibygsx Aa Uoit Digital display with stroke programming Demonstration machine

Būklė: naujas, Gamybos metai: 2025, Vamzdžių lenkimo staklės Zopf Modelis KB 100: Didžiausias vamzdžio skersmuo: 100x5 mm St. 37 Kvadratiniai profiliai: 80x80x3 mm Vientisos medžiagos: 45 mm Didžiausias įrankio skersmuo: 900 mm Lankstymo kampas iki 210° Lankstymo greitis: 0–2,2 aps./min. Variklis: 11 kW, 400 V, 50 Hz, 3 fazės Svoris: 1850 kg Matmenys: 140x80x160 cm – Skaitmeninis ekranas – Lankstymo kampo programavimas – Su kojiniu pedalu – Su inverteriu – Galingas variklis ir reduktorius dideliam sukimo momentui – Valdymas lankstymo kampo nustatymui – Skaitliukas atraminės pusės sureguliavimui – Mobilus valdymo pultas Gisdex I Afxepfx Aa Ujt – Greita įrankių keitimo sistema – Visos ašys grūdintos ir šlifuotos – Medžiagos spaudimas rankinis – Darbinis stalviršis CK 45

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Horizontal bending machine T 400 Multiprogram - ZOPF - with semi-automatic control - NC control (99 programs with up to 16 steps each) - incl. bending pin (without die) - incl. tool holder for dies and foot pedal - Pressing force: 40 tons - Infinitely adjustable stroke setting: 0–250 mm - Adjustable working speed: Max. working stroke: 10 mm/sec Return stroke: 20 mm/sec - Adjustable hydraulic pressure - Maximum tool height: 250 mm - Motor power: 3.0 kW Gedpfxjfiqlfe Aa Uoit - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Closed work table - Replaceable wear plate - Weight: 1000 kg - Color: RAL5012 / RAL7015 - Bending capacities: Flat material: 200x22 mm Round tube up to 65 mm

Būklė: naujas, Gamybos metai: 2025, bendras svoris: 1 000 kg, Horizontal bending machine T 300 Multi, new design - ZOPF - With semi-automatic control - NC control (99 programs with 16 steps each) - Incl. bending pin (without die) - Incl. tool holder for dies and foot pedal - Pressing force: 30 tons - Infinitely variable stroke adjustment: 0–250 mm - Adjustable working speed Max. working stroke: 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 250 mm - Motor output: 3.0 kW - 400 Volt, 50 Hz, 3-phase - Working height: 900 mm - Enclosed table - Replaceable wear plate - Weight: 950 kg - Colour: RAL5012 / RAL7015 - Bending capacity: Flat material: 200x20 mm Round pipe: 3/8" – 2" Godpfowqftdjx Aa Uoit

Būklė: naujas, Gamybos metai: 2025, Manual angle bender Karnasch Model 100 E Giodpjfhdfvefx Aa Uet German quality product Cold bending capacity with ST 37 Steel up to 100x6 mm Solid round material up to 18 mm with length stop with 2 radius plates Weight approx. 27 kg

Gamybos metai: 2024, būklė: naujas, Band rolling machine BRT 100 with mandrel Ø 18 mm - rolls materials of various diameters and widths at a bending angle up to 360° - secure clamping of the material thanks to the rack-and-pinion system - high working precision due to hardened Godpfx Aaofmy Ahj Uoit and ground mandrels - quarter mandrel ensures sharp-edged rolling (optional) Bending capacity: cold: up to 100x5 mm cold: up to Ø 12 mm hot: up to 100x15 mm hot: up to Ø 30 mm Rollable diameters with mandrel: 6.0-31.5 mm / with roller: 32-60 mm