Webo A1450 pirkti naudotą (1 085)

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2007, veikimo valandos: 23 434 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 3 970 mm, laisvas kėlimas: 1 850 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 2 610 mm, šakių laikiklio plotis: 1 150 mm, šakių ilgis: 1 200 mm, tuščias svoris: 4 600 kg, bendras ilgis: 2 800 mm, pavaros tipas: Diesel, statybos plotis: 1 270 mm, Diesel forklift Load center: 500 mm Fork width: 150 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Bjdpfx Afox A I Rae Asdb Front tires size: 250/75-12 Rear tires type: Superelastic Rear tires size: 23x9-10 Description: In addition to this Linde model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts & side loaders available in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing & financing under attractive conditions always available. We are also happy to purchase your used forklift outright, regardless of whether you buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this H30D. P.S.: Our master workshop specializes in repair, maintenance, overhauls, and custom constructions for forklifts from 8 tons upwards. We can also exhibit your vehicle for consignment sale at our facility. Sideshift, heating, full cabin, full free lift,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 7 300 h, keliamoji galia: 15 000 kg, kėlimo aukštis: 5 000 mm, laisvas kėlimas: 2 500 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 4 145 mm, šakių laikiklio plotis: 2 540 mm, tuščias svoris: 23 300 kg, bendras ilgis: 5 455 mm, pavaros tipas: Diesel, statybos plotis: 2 540 mm, Diesel forklift Load center: 1200 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on favorable terms are always possible. We are also happy to buy your used equipment directly, even if you are not purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this SMV15-1200C. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons and up. We are also happy to offer your vehicle for consignment sale at our facility. Bdsdpev Uttbofx Af Asb Crane arm Heater, full cabin, full free lift,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 7 300 h, keliamoji galia: 15 000 kg, kėlimo aukštis: 3 530 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 450 mm, šakių laikiklio plotis: 2 540 mm, šakių ilgis: 2 200 mm, tuščias svoris: 23 300 kg, bendras ilgis: 5 455 mm, pavaros tipas: Diesel, statybos plotis: 2 540 mm, Diesel forklift Bodjxn U Ipopfx Af Asdb Load center: 1200 mm Fork width: 350 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 12.00-20 Rear tires type: Pneumatic Rear tires size: 12.00-20 Description: In addition to this Konecranes model, we currently have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing at attractive conditions are always possible. We are happy to purchase your used vehicle outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be glad to advise you personally regarding this SMV15-1200C. P.S.: Our specialist workshop is dedicated to repairs, servicing, overhauls, and custom modifications for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale on our premises. Sideshift, fork positioner, Fork positioner opening range: 810 / 2500 mm Heater, full cabin,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, keliamoji galia: 45 000 kg, tuščias svoris: 4 200 kg, bendras ilgis: 10 000 mm, Accessories Bjdpfx Afeu Dzv He Aodb Mast type: None Condition: Ready for use and fully operational Technical condition: Very good Description: In addition to this --brand-- model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive rates are always possible with us. We are also happy to purchase your used equipment outright, even if you don't buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this --brand type--. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom modifications for forklifts from 8 tons upwards. We are also happy to offer your vehicle for commission sale at our location.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, valdiklių gamintojas: CypCut, valdiklio modelis: CypCut, lazeri tipas: šviesolaidinis lazeris, lazdo šaltinio gamintojas: Raycus, lazerio šaltinio modelis: Raycus 3000W, lazerio galia: 3 000 W, lazerio bangos ilgis: 1 080 nm, maks. lakšto storis: 25 mm, plieno lakšto storis (maks.): 25 mm, nerūdijančio plieno lakšto storis (maks.): 12 mm, aliuminio lakšto storis (maks.): 10 mm, žalvario lakšto storis (maks.): 8 mm, vario lakšto storis (maks.): 6 mm, stalo ilgis: 3 000 mm, stalo plotis: 1 500 mm, darbinis ilgis: 3 000 mm, darbinis plotis: 1 500 mm, darbinio aukščio: 80 mm, X ašies eiga: 3 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 80 mm, X ašies padavimo greitis: 80 m/min, Y ašies padavimo greitis: 80 m/min, pozicionavimo greitis: 80 m/min, pozicionavimo tikslumas: 0,02 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 2 700 kg, bendras ilgis: 4 500 mm, bendras plotis: 2 200 mm, bendras aukštis: 1 800 mm, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, Fiber laser cutting machine 3000W 1500×3000 is a modern CNC system designed for precise metal processing in industrial applications. Thanks to the use of a powerful Raycus laser source and the advanced CypCut control system, the machine ensures high accuracy, repeatability, and ease of operation. The robust, welded, and stress-relieved annealed construction guarantees operational stability as well as resistance to deformation, resulting in long service life and reliability. Bdsdpfx Asyw R Rnof Aeb The machine offers a large working area of 1500 × 3000 mm and high traversing speeds of up to 80 m/min, enabling efficient processing of both single parts and series production. The WSX cutting head with automatic focus adjustment (autofocus) ensures optimal cutting parameters across various materials and thicknesses, reducing the need for manual adjustment and increasing productivity. The machine can process a wide range of materials such as mild steel, stainless steel, aluminum, brass, and copper, delivering clean cut edges and high surface quality. Another advantage is the use of high-quality components such as INOVANCE servo drives, linear guideways, and a reliable S&A water chiller, which enable stable continuous operation, even in 24/7 mode. The machine is designed with operator safety and convenience in mind, featuring safety systems, easy access to controls, and the option to integrate additional systems such as extraction or automated loading. It offers an efficient and economical solution for companies seeking state-of-the-art laser cutting technology. Delivery to the customer is possible. Shipping costs are calculated individually by the freight carrier. If you are interested in further machines, please visit our website.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, veikimo valandos: 1 579 h, keliamoji galia: 2 000 kg, kėlimo aukštis: 4 620 mm, laisvas kėlimas: 1 500 mm, kuro tipas: dujos, stiebo tipas: triplex, statybinis aukštis: 2 200 mm, pavaros tipas: Treibgas, LPG forklift Load centre: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyres type: superelastic Front tyres condition: 80 - 100% Rear tyres type: superelastic Rear tyres condition: 60 - 80% Bdsdjy Et Apepfx Af Aeb Description: The vehicle will be UVV-inspected and undergo service and cleaning before delivery. Painting is available on request for an additional charge. In addition to this model, we have around 120 other forklifts of all weight classes in stock at our warehouse in Meschede-Calle. Visit our website – rf-stapler. Hire purchase & financing available on attractive terms. We also buy used equipment outright, even if you do not purchase a vehicle from us. Our master workshop specialises in repairs, servicing, refurbishment, and overhaul of your forklift. We are also happy to sell your vehicle on consignment. Sideshift, 3rd valve, 4th valve, rear working light, front working light, road registration (STVZO), full cab, full free lift, seat heating,

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 000 kN, varžto skersmuo: 40 mm, tarpas tarp stulpų: 420 mm, darbinio tūrio: 251 cm³, bendras ilgis: 4 650 mm, bendras plotis: 1 450 mm, bendras aukštis: 2 050 mm, bendras svoris: 4 600 kg, įvesties srovės tipas: Nuolatinė srovė, įėjimo dažnis: 50 Hz, įėjimo įtampa: 460 V, For sale: Battenfeld injection moulding machine, type HM1000-75 131426-100. The machine is in excellent condition and ready for immediate use. Technical Data: Model / Type: HM 100/750 S Year of Manufacture: 2008 Total Weight: 4,600 kg Hydraulic Operating Pressure: 275 bar Pneumatic Operating Pressure: 6 bar Rated Voltage: 400 V Frequency: 50 Hz Rated Motor Current: 40 A Control Voltage: 24 V DC Wiring Diagram No.: HMB6S131426-100 Rated Current: 120 A Max. Back-up Fuse gL: 100 A Clamping Force: 1,000 kN Clear Tie Bar Distance: 420 x 420 mm Screw Diameter: 40 mm Stroke Volume: 251 cm³ Max. Shot Weight: 228 g Length: 4,650 mm Width: 1,450 mm Height: 2,050 mm Transport and loading can be organized across Europe for an additional fee, upon request. Prices are subject to VAT. Viewing by appointment possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machines purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Bjdsy En Sfopfx Af Asdb Gjbn N Ay Dowza Dxogoil Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 2004, spaudimo jėga: 1 000 kN, tarpas tarp stulpų: 420 mm, darbinio tūrio: 192 cm³, įvesties srovės tipas: Nuolatinė srovė, įėjimo dažnis: 50 Hz, įėjimo srovė: 80 A, For sale: Battenfeld injection moulding machine, model HM 1000-750. The machine is in good condition and ready for immediate use. Technical specifications: Model / Type: HM 1000/750 Year of manufacture: 2004 Control system: Unilog B4 Total weight: 4,600 kg Hydraulic operating pressure: 240 bar Pneumatic operating pressure: 6 bar Rated voltage: 230/400 V Frequency: 50 Hz Rated motor current: 40 A Control voltage: 24 V DC Circuit diagram number: HM B4500028412 0 Max. pre-fuse: 80 A (1st supply line) / 50 A (2nd supply line) Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Max. shot volume: approx. 192 cm³ Input current (total): 63 A or 80 A Transport and loading can be organised throughout Europe on request, subject to additional charges. All prices are plus VAT. Inspection by appointment is possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sales Bdedpfoy Enh Tox Af Aob BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact possibilities, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 133, gaminio plotis (maks.): 270 mm, darbinis plotis: 270 mm, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, Semi-rotary flexo printing machine MALBATE Mecaformat 270. 5 color units + 1 varnish unit + rotary magnetic die-cutting station. Bjdpjyr R Sgjfx Af Aodb UV drying – 6 drying units Average electrical consumption ~35 kW Compressed air required: 7/8 bar Maximum web width: 270 mm Minimum web width: 150 mm Maximum feed length: 220 mm Minimum feed length: 50 mm Maximum print width: 260 mm Maximum print length: 305 mm Maximum length of semi-rotary die-cutting blade: 220 mm Maximum allowable unwind roll length: 3000 m Unwind unit roll diameter: 800 mm Waste rewind roll diameter: 450 mm Finished product rewind roll diameter (on core): 360 mm Maximum speed: 10,000 cycles/h The machine is currently in production. Appointments can be made for inspection. Details available in the PDF file. For additional information, please contact us.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 300 h, Prices on request XG x 2800 5x Ca E200L 4x CA Dc 40 e The system was used for only 90 days—like new condition. The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series by KEYENCE Germany. This advanced image processing system provides enhanced features and flexibility for demanding inspection applications. Technical data: Laser scanner / Profile measurement: The XG-X2800LJ is specially designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line scan cameras, LJ-V sensors, and 21-megapixel cameras. Bdjdpfxer Rddzj Af Aob Flowchart-style programming: The XG-X was developed for advanced users and enables programming in a flowchart style. Manuals and software: User manuals and software are available for configuration and customization via PC, as well as remote control and capturing images and results on a PC. Please note that the pictured accessories are for illustrative purposes only and may not be included in the product scope of delivery. For more information, please refer to the official KEYENCE website. If you have any further questions or require assistance, feel free to contact me!

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, The offered (fish mask design) mask machine combines efficiency and safety features with an optimized fit. These product characteristics are realized, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touchscreen for straightforward and clear operation, and a robust, optimized steel unwind unit. Process steps at a glance: - Feeding of the filter material via a web edge control system, as well as the nose wire; uniform welding of the mask with subsequent folding and separation of the basic body. - The next process step involves attaching the ear loops using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a flow pack machine can be ordered additionally. In detail: - Welded unwinding unit with a total of 4 manual tension shafts, magnetic powder brakes, and web edge control system for feeding the filter material. - Nose wire is fed by another unwinder. - The use of discs in combination with slim aluminum profiles allows clear visibility into production, while fully protecting the operator. - Upon request, we are pleased to offer various printing systems to apply legally required markings to your masks. - The use of ultrasonic technology and durable materials such as titanium guarantees increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material infeed and guidance as well as separation by means of a rotary cutter with lateral web output. - High-resolution, user-friendly HMIs with touchscreen. - Mask body welding via ultrasonic technology with subsequent folding die and welding of upper and lower surfaces. - Precise separation of the mask from the web using a rotary cutter, followed by mask output and lateral ejection of the web. - Subsequent earstrap embedding by ultrasonic technology. - Optional: Camera inspection with good/reject detection - Optional: Output to a stacker - Optional: Output to a flow pack station for individual mask wrapping Bodsh Uuhcspfx Af Aedb Performance data & dimensions: - Power consumption: approx. 4-5 kW in operation - Power supply: 220 V/50 Hz - Output: 80 masks/min - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200 x 5000 x 1800 mm (L x W x H) - Mask dimensions when closed (longest and widest point): 205 x 82 mm (+/- 2mm) We are happy to send you an individual, high-quality system quotation. For this, we kindly ask you to provide your company information in advance.

Būklė: naujas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Dear Sir or Madam, We are offering for sale three brand new Erhardt+Leimer web guiding systems, which have been installed but have not been used to date. They have only been operated for 50 hours for testing purposes. Ultrasonic Edge Sensor POE FX 46: Bdedpfx Asi Hl Hhjf Aeb Compact ultrasonic edge sensor with digital evaluation Insensitive to contamination by dust Scanning of sound-impermeable materials such as paper, plastic, and metal foils, regardless of material transparency Internal temperature compensation for a stable operating point Bar display for current edge position indication or diagnostic purposes PoE interface for connection to data network centers _____ FR 6011 Infrared Wideband Sensor: Clear width 40 mm, with 3000 mm cable and cable gland For further details, please contact us. Current delivery time from E+L: approx. 10-12 weeks Our systems are available immediately. All systems were function tested on 06/01/2026 _____ Production date is mid/end of 2021 (see type plates). 7x DRB14 pivoting frame systems EL.NET for web guiding, with digital position controller with touch display. Includes connecting cables. Sensor type: FR 6011 IR wideband sensor Nominal width: 250 mm Roller diameter: 60 mm Maximum web tension: 300 N Maximum correction path: 42 mm If you require more detailed information, please do not hesitate to contact us by email or phone.

Būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Der ibg Ring Tester Large ist für die automatische Rissprüfung von Wälzlager-Innen- und Außenringen mit einem Durchmesser von 45 bis 100 mm konzipiert. Das System führt zunächst eine Gefügeanalyse durch, gefolgt von einer Linienscan-Prüfung der Laufbahnen sowie des Innen- und Außendurchmessers, gesteuert durch den eddyvisor C. Nach der Prüfung werden die Bauteile automatisch klassifiziert und in OK und n.i.O. (nicht in Ordnung) sortiert. Die Prüfeinheit ist auf einem robusten Metallgestell montiert, das für den industriellen Produktionseinsatz ausgelegt ist. Integrierte Stellflächen dienen zur Aufnahme der Stahlschränke mit Messtechnik und SPS (inkl. Siemens SPS). Saubere, aufrecht stehende Bauteile werden vereinzelt, einem Transport-Rad zugeführt und dort über Riemen zur Rotation beschleunigt. Im Prüfbereich sorgen verstellbare Rollen für eine seitliche Fixierung, während die Sonden die Oberflächendefekte abtasten; anschließend erfolgt die automatische Sortierung in OK und n.i.O. Vor der Prüfung müssen die Ringe partikelfrei und frei von tropfender Flüssigkeit sein. Die Anlage folgt dem ibg good-part-only-Prinzip, während n.i.O.-Meister ausschließlich zur Nachweisprüfung im Testbetrieb verwendet werden. Einlaufhöhe: 1550 mm, Auslaufhöhe: 1220 mm. Bdedpey H Dkaefx Af Ajb Für weitere Informationen besuchen Sie bitte unsere Website.

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A demonstration video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale ex works, advance payment required. No warranty or guarantee given. Bdjdpsy Avlnefx Af Asb

Būklė: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, Baler Dixi 80 SLD, with lift/tip device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Throughput: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Bedpfxsy Avhcs Af Aedb Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A demonstration video is available on our website or YouTube channel. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. Sale ex works, advance payment required. No warranty or guarantee given.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area The GENERAC WASH RACK MODULE D 6000 x 5700 cm wash area is a customizable wash system that can be configured to various customer requirements, including platform arrangement, maximum load capacity, wall and tank placement, as well as filter system positioning. This modular system features side walls (customizable in number and length, height: 2.6 m) and ramps (number and position selectable according to your needs), ensuring maximum flexibility. The platform, consisting of four sections with removable grating for easy cleaning, provides a maximum load capacity of 15 tons. The main filtration system, with a capacity of 600 or 3000 liters, efficiently filters oil, hydrocarbons, and solids. Side tanks on each side, as well as an optional wash rack decanter (1000-liter capacity, 1500 x 1500 x 2300 mm, dry weight: 400 kg), separate water from the majority of sludge through decantation in high-sludge scenarios; dosing pumps for flocculants are available upon request. The diaphragm pump (0.054 kW, 14 L/min) is activated by a water level sensor, while the booster pump (0.37 kW, 5–40 L/min) allows flexible water delivery. With a total washing bay size of 8200 x 6600 x 2850 mm, a platform size of 6000 x 5700 mm (dry weight: 5600 kg) and a filter tank (600 L: 3000 x 700 x 1000 mm, 250 kg; 3000 L: 3450 x 1000 x 2120 mm, 625 kg), this washing station is ideal for demanding cleaning tasks. Manufactured by GENERAC, this system offers superior quality and flexibility for industrial applications. - Customizable side walls (height: 2.6 m) and ramps to suit your needs - Platform with 4 segments and removable grating, load capacity: 15 tons - Main filtration system: 600 or 3000 liters for oil, hydrocarbons, solids - Side tanks: On each side for flexible configuration - Diaphragm pump: 0.054 kW, 14 L/min, with water level sensor - Booster pump: 0.37 kW, 5–40 L/min - Total washing bay: 8200 x 6600 x 2850 mm, Platform: 6000 x 5700 mm - Platform dry weight: 5600 kg - Filter tank (600 L): 3000 x 700 x 1000 mm, 250 kg - Filter tank (3000 L): 3450 x 1000 x 2120 mm, 625 kg - Optional: Wash Rack Decanter (1000 L, 1500 x 1500 x 2300 mm, 400 kg) - Product video available: GENERAC WASH RACK MODULE D on the GENERAC website - Application areas: industrial cleaning, custom washing facilities - Origin: Manufactured by GENERAC, leading manufacturer from Italy - Modular, robust, for bespoke cleaning requirements Technical Data: GENERAC WASH RACK MODULE D 6000 x 5700 cm Wash Area Specification Value Diaphragm Pump Power 0.054 kW Diaphragm Pump Capacity 14 L/min Booster Pump Power 0.37 kW Booster Pump Capacity 5–40 L/min Bdsdsydf Erspfx Af Aeb Total Washing Bay (LxWxH) 8200 x 6600 x 2850 mm Platform Dimensions 6000 x 5700 mm Platform Dry Weight 5600 kg Filter Tank (600 L) 3000 x 700 x 1000 mm Filter Tank (3000 L) 3450 x 1000 x 2120 mm Filter Tank Dry Weight (600 L) 250 kg (3000 L) 625 kg Decanter (optional) 1500 x 1500 x 2300 mm Decanter Dry Weight 400 kg (optional) Decanter Capacity 1000 L (optional) Max. Load Capacity 15 tons Year of Manufacture 2021 but new/unused

Būklė: naudotas, Gamybos metai: 1999, veikimo valandos: 3 400 h, mašinos/transporto priemonės numeris: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: reading - Borehole diameter: max. 385 mm Bdjdpjhd I S Uefx Af Aob - Maximum torque: 2,500 kN - Pulling force: 96 kN - Thrust force: 65 kN - Maximum drilling length: 250 m - Power: 90 kW - Drill rods and bits included - Complete equipment with separate engine, hydraulic unit, and drilling fluid tank - Perkins engine 119 kW / 162 HP This offer is non-binding; errors and omissions excepted. Only the specific agreements in the order confirmation or purchase contract are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC), which are available at any time on our website or upon request. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Further information Intended use: Construction/Engineering

Gamybos metai: 2020, būklė: naujas, mašinos/transporto priemonės numeris: 373064736, Horizontal bitumen tank Capacity: 50 m³ Thermal oil heated Condition: NEW Bdodpfxji Aqiko Af Ajb This offer is non-binding; input errors and mistakes excepted. Only the specific agreements in the order confirmation or the purchase contract are valid. The exclusive basis for this contract is our General Terms and Conditions (GTC). These are available at any time on our website or can be requested from us. Place of jurisdiction is Eberswalde, Germany. Additional information Intended use: construction sector, Overall condition: very good, Technical condition: very good, Visual condition: very good,

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 580 mm, padavimo eiga Y ašimi: 200 mm, padavimo ilgis Z ašis: 130 mm, X ašies eiga: 580 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 130 mm, veleno greitis (maks.): 3 200 aps./min, veleno greitis (min.): 100 aps./min, veleno tvirtinimas: MK 4, gerklės gylis: 286 mm, quill skersmuo: 130 mm, šilko eigos atstumas: 130 mm, įvesties srovės tipas: trifazis, bendras ilgis: 860 mm, bendras aukštis: 1 200 mm, stalo plotis: 240 mm, įėjimo įtampa: 400 V, bendras plotis: 740 mm, stalo ilgis: 800 mm, gręžimo pajėgumas: 45 mm, frezos galvos padėtis: ±90°, gręžimo gylis: 130 mm, ruošinio svoris (maks.): 375 kg, atstumas nuo stalo iki veleno centro: 450 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Drilling and Milling Machine ZX7045B VARIO – Professional Metalworking Machine The ZX7045B VARIO drilling and milling machine is a robust and versatile solution for professional metalworking in workshops, manufacturing facilities, and toolmaking departments. This machine supports drilling, milling, and thread cutting, making it a universal tool for a wide range of machining tasks. Equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm, the machine ensures high precision thanks to the spindle supported in precision bearings. The oil-bath gear transmission guarantees durable and quiet operation. The head is height-adjustable and can swivel ±45°, allowing machining at various angles. Automatic spindle feed and auto-reverse function during thread cutting significantly simplify handling. The large working table (800 × 240 mm) with T-slots provides stable workpiece clamping. The heavy-duty design and rigid machine bed ensure high stability during operation. The unit is also equipped with a coolant system and an emergency stop switch. Bsdpfx Aoyvh Hqsf Aedb Technical Data Parameter Value Model ZX7045B VARIO Max. drilling capacity 45 mm Max. face mill diameter 80 mm Max. end mill diameter 32 mm Max. thread cutting M12 Spindle taper MT4 Spindle stroke 130 mm Spindle speed 100–3200 rpm Speed adjustment stepless Max. spindle–table distance 450 mm Spindle axis–column distance 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head ±45° swivelable Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to customer possible. Transport costs are calculated individually by the carrier. If you are interested in more machines, please visit our website.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 2 000 mm, tekėjimo skersmuo: 660 mm, veleno skylė: 105 mm, veleno greitis (maks.): 1 600 aps./min, veleno greitis (min.): 25 aps./min, ašies variklio galia: 7 500 W, bendras aukštis: 1 460 mm, bendras ilgis: 2 840 mm, bendras plotis: 1 150 mm, įvesties srovės tipas: trifazis, bendras svoris: 3 600 kg, sūpynės skersmuo virš skersinio stumdomo: 360 mm, Įranga: dokumentacija / vadovas, Universal Lathe 660 × 2000 with DRO The machine is brand new 12-month warranty Bdodeyvgbfjpfx Af Asb Warranty service Post-warranty service CE Declaration of Conformity Operating manual (English) Machine available for immediate delivery. Technical Data Swing over bed – 660 mm Swing over cross slide – 360 mm Swing in bed gap – 900 mm Turning length in bed gap – 250 mm Turning length – 2000 mm Bed – inductively hardened Bed width – 350 mm Chuck diameter – 315 mm Spindle bore – 105 mm Spindle mount – D1–8 Spindle taper – MT7 Spindle speed range – 25 – 1600 rpm Maximum tool size – 25 × 25 mm Longitudinal feed – 0.044 – 1.48 mm/rev Cross feed – 0.022 – 0.74 mm/rev Metric threads – 0.2 – 14 mm Inch threads – 2 – 112 T.P.I. Module threads – 0.1 – 7 M.P. D.P. threads – 4 – 112 D.P. Rapid traverse – longitudinal 4.2 m/min Tailstock quill diameter – 75 mm Tailstock quill stroke – 180 mm Tailstock taper – MT5 Main motor power – 7.5 kW Coolant pump power – 0.1 kW Dimensions (L × W × H) – 2840 × 1150 × 1460 mm Weight – 3600 kg Delivery to the customer is available. Shipping costs are calculated individually according to the freight carrier's quote. If you are interested in additional machines, please visit our website.

Būklė: naujas, Gamybos metai: 2026, veleno skylė: 38 mm, tekėjimo skersmuo: 330 mm, tekėjimo ilgis: 750 mm, bendras ilgis: 1 330 mm, bendras plotis: 750 mm, bendras aukštis: 700 mm, veleno greitis (maks.): 1 650 aps./min, veleno greitis (min.): 60 aps./min, bendras svoris: 320 kg, Universal lathe 330 × 750 mm The machine is designed for machining workpieces, primarily those with surfaces of rotational bodies (shafts, cones, spheres, as well as internal and external threads). Typical machining tools include turning tools, drills, or threading tools. Thanks to its modern features and equipment, this lathe is ideally suited for professional and industrial applications. Equipment - 160 mm 3-jaw chuck - Coolant system - Live centre MT3 - Lathe stand/base - Change gears for thread cutting - Work lighting Optional equipment - 2-axis digital readout (DRO) Technical data - Swing over bed: 330 mm - Maximum workpiece length: 750 mm - Swing over cross slide: 220 mm - Chuck diameter: 160 mm - Spindle bore: 38 mm - Spindle taper: MT5 - Number of metric thread types: 20 - Metric thread range: 0.5 – 4 mm - Imperial thread range: 9 – 40 T.P.I. - Longitudinal feed: 0.135 – 1.80 mm/rev - Tailstock quill stroke: 70 mm - Tailstock taper: Morse 3 - Number of spindle speeds: 12 - Spindle speed range: 60 – 1650 rpm - Motor power: 1.1 kW - Dimensions (L × W × H): 1330 × 750 × 700 mm - Weight: 320 kg Bodpfx Aeyvfzqef Aodb Delivery to the customer is possible. Shipping costs are calculated individually based on the transport company’s offer. If you are interested in more machines, please visit our website.

Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 4 537 h, keliamoji galia: 4 500 kg, kėlimo aukštis: 21 000 mm, kuro tipas: dyzelinas, statybinis aukštis: 3 000 mm, pavaros tipas: automatinis, Rotary Telehandler by Merlo, RT 4025 / Roto 45.21 MCSS * Model RT4025 / Roto, all-wheel drive * Year of manufacture: 2012 * Operating hours: 4,537 according to meter * Lifting height approx. 21 m * Max. load capacity approx. 4,500 kg * Max. reach approx. 18 m * Single cab with 1 seat Bdedpfeyq Acujx Af Aob * Powered by 6-cylinder Iveco diesel engine * Maximum speed: 20 km/h * 3-section telescopic steel boom * Tire size: 445/65-R22.5, tread depth 7–15 mm, wheelbase 3,000 mm * Overall dimensions (L x W x H): 6,700 x 2,450 x 3,000 mm * Total weight: 15,500 kg * Hydraulic 4-point outrigger system: 4,950 x 4,950 mm * Pallet forks, tine length 1,200 mm * Radio remote control * Rust damage – see photos Further details and additional photos available upon request. This description does not constitute a binding offer and may contain errors; no guarantee for the accuracy of all information provided. Please also visit our website.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Baler Paal Pacomat II, Year of Manufacture 1979 Technical Specifications: Manufacturer: Paal Model: Pacomat II Bdsdjyz Saljpfx Af Ajb Year of Manufacture: 1979 Drive Power: 11 kW Pressing Force: 27 t Channel Cross-section: 700 x 1000 mm Feed Opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale Size: 700 x 1000 mm Bale Weight: up to 400 kg Machine Dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine Weight: approx. 5200 kg Materials: Paper, Cardboard, Film Remarks: The machine is in working condition. It has been inspected and tested at our site in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Inspections, including under power, are possible at any time by appointment. Please note: All technical information is based on manufacturer’s data. We do not accept liability for the stated information or for any potential errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections can be arranged by appointment. The sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 28 155 h, Funkcionalumas: visiškai funkcionalus, Bale Press Paal Konti 200 D, year of manufacture 2000 Technical Data: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Bdsdpfx Aoyz R Uuof Aeb Tying: 4-fold automatic Throughput performance at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: paper, cardboard, film The press is in good condition and has been checked and tested. A video can be found on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on the manufacturer’s information. We assume no liability for the given details or possible errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 1 640 h, Funkcionalumas: visiškai funkcionalus, Bale Press Presto CC 40 M, Year of Manufacture 2017 Bdodpfxsyz R Hqj Af Ajb Technical Data: Manufacturer: Presto Model: CC 40 M Year of Manufacture: 2017 Press Force: 40 t Cycle Time: 34 s Drive Power: 15 kW Feed Opening: 1080 x 1100 mm Feed Volume: 0.85 m³ Tying: 4-fold, polyester strap, manual Throughput at bulk density of 35 kg/m³ - 1.8 t/h 60 kg/m³ - 2.5 t/h 100 kg/m³ - 3.1 t/h Bale Dimensions: 750 x 1100 mm Bale Weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine Weight: approx. 3800 kg Materials: Paper, Cardboard, Film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. The operating manual and CE declaration are available. Note: Channel discharge is fully automatic and self-regulating. Please note: All technical data is based on the manufacturer's information. We do not accept liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. Sales are made in advance payment, ex works, without warranty or guarantee.