Suvirinimo Strypas 1,0 Mm pirkti naudotą (85 579)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. Gkedpfx Anoh Ek Daj Hjc The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Gamybos metai: 2025, būklė: naujas, Ultraschallbad UEC 300 ist eine Industrielösung zur Reinigung großer und schwerer, stark verschmutzter Teile. Die Maschine verfügt über einen pneumatischen Hub mit einer Tragkraft von 200 kg. Die Arbeitsfrequenz beträgt 28 kHz mit Sweep-Technologie. Das Gerät besteht aus einem Haupt-Ultraschallbad mit drei seitlichen Ultraschall-Piezowandlern sowie einem zweiten, darüberliegenden Bad mit Ölabscheider. Die Steuerung erfolgt über ein hochwertiges Touchscreen-HMI mit 3D-Anzeigen. Das komplette Bad ist aus säurebeständigem Edelstahl AISI304 mit einer Materialstärke von 2 mm gefertigt. --- Technische Daten : Plattformgröße: 900 x 570 mm Gsdpfx Anogd Uifs Hskc Maximale Traglast: 200 kg Nutzbare Höhe: 400 mm Ultraschallleistung: 3 kW (6 kW p-p) Ultraschallfrequenz: 28 kHz mit Sweep-Modus Heizleistung: 9 kW Ausstattung : 7" Touchscreen mit 3D-Benachrichtigungen Automatisches Wassernachfüllsystem Automatischer Liftbetrieb Füllstandssensor Hubpositionssensoren Deckelsensor Garantie: 2 Jahre WEITERE MODELLE AUF LAGER VERFÜGBAR

Būklė: paruoštas naudoti (naudotas), Gebruikte blikproductielijn voor de vervaardiging van blikken met een diameter van 73 mm of 99 mm. Er zijn diverse samenstellingen van machines beschikbaar. Bestaande uit: - Krupp Sdvt duplex snijmachine - Soudronic FBB400 lasmachine - Soudronic intern poedercoatingsysteem - Extern lakkeringssysteem - Frei uithardingsoven - Metalbox 65d spinflansapparaat - FMI A304 profileringseenheid - FMC 652 sluitsysteem Gedpfx Ansvy Tyxs Hokc

Būklė: labai geros būklės (naudotas), Rowatec MM 33 - Transformer welding machine - Heavy-copper transformer Gksdpfx Ansuyg Imo Hec - Power rating: 330A at 60% duty cycle, 250A at 100% duty cycle - Voltage range: 15.8V–33V - Circuit protection: 22A, 400V - Stepwise voltage adjustment (10 fine positions, 2 coarse positions) - Stepless wire feed speed control - 4-roll wire feeder - Welding modes: 2-stroke, 2-stroke spot, 2-stroke timed, 4-stroke, 4-stroke spot, 4-stroke timed - Stepless adjustment of pause duration and welding duration - Adjustable post-weld wire burnback time

Būklė: naudotas, Four in a Row – The Success Building Blocks of DLK – Storage Technology | Levelmaker® | Logistics | Solutions WE OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. Gedpfx Ansvdqhbs Hokc PROJECT PLANNING Our sales team will be happy to provide you with a non-binding quote tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The indicated price is per piece/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing the applicable VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions.

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Gkodpefxpbmjfx An Hsc

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 14 500 h, Funkcionalumas: visiškai funkcionalus, kuro tipas: dyzelinas, spalva: balta, Įranga: apšvietimas, kabina, oro kondicionavimas, papildomi žibintai, Parduodamas naudotas „Syncrofalke 3t“ trosinis kranas („kalnų miškovaizdės“), pagamintas „Mayr Melnhof Forsttechnik GmbH“ įmonės, skirtas naudoti miške. Pagaminimo metai: 2017 m. Su procesorine galvute „Woody 60“ (įskaitant šakų pjūklą). Varantysis vežimėlis: „Sherpa U“. Pagrindinis transporto priemonės modelis: „MAN TGS“. Galima apžiūrėti bet kuriuo metu, kai prietaisas naudojamas. Ypatybės: Idealiai tinka statiesiems šlaitams ir sudėtingam reljefui! Labai tvirta konstrukcija, skirta intensyviam naudojimui miške. Reguliariai prižiūrimas – iš karto pasirengęs darbui! Gsdpfxowtw Apo An Hskc Būklė: Techniškai ir vizualiai puikios būklės. Pasirengęs darbui, nereikia atlikti jokių priežiūros darbų.

Būklė: beveik kaip naujas (parodų įrenginys), padavimo ilgis X ašis: 800 mm, obliavimo plotis: 800 mm, Dvipusė obliavimo staklės. Labai gera darbo būklė. Gkjdpfx Aox Rrykjn Hsc

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), Horizontali plovykla TRIULZI SY 2600 6.3.6 Pagaminimo metai: 2007 Darbinis plotis: 2600 mm Mažiausias stiklo dydis: 180 x 250 mm Stiklo storis: 2 - 35 mm Darbo greitis: 2 - 8 m/min (valdomas inverteriu) Plovimo įrenginį sudaro: Gkedox Ecwmopfx An Hsc - Įėjimo konvejeris apie 1000 mm ilgio, - Išankstinis plovimas (kiekvienam plovimo ciklui), - 3 poros šepečių (6 vnt.), - 3 poros oro peilių (6 vnt.), - 3 nerūdijančio plieno vonios (2 su šildymu), - Išėjimo konvejeris apie 1400 mm ilgio. Bendras ilgis: apie 6900 mm Labai geros ir švarios būklės Parduodama kaip yra Galima iš karto

Būklė: geras (naudotas), Included in the scope of delivery: Godpfx Anolhp Tco Hokc 198x deep bars, used Material colour: sendzimir galvanized Total length: approx. 1,110 mm Suitable for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Beam support: approx. 50 mm Weight per piece: approx. 3.02 kg Note: The unit price applies only for a minimum purchase quantity of 198 pieces (1x pallet).

Būklė: beveik kaip naujas (parodų įrenginys), Included in the scope of delivery: 01x Column guard, second choice Gjdjlikw Hopfx An Hskc Material color: yellow Total height: approx. 1,000 mm Total width: approx. 128 mm Internal width: approx. 120 mm Material thickness: approx. 4.00 mm Weight: approx. 5.23 kg each Each side: 2 mounting holes Ø approx. 11 mm Hole center-to-center distance: approx. 900 mm

Būklė: geras (naudotas), Technical data for pallet rack beam: Racking system: Dexion Type: Speedlock P90 Godpfolkc Erjx An Hskc Included in delivery: 01x Pallet racking beam, used Colour: orange Beam type: SLB 100|15 Box profile: 100 x 50 mm Connector: 5 hooks Clear span: 3,000 mm Max. load capacity per pair of beams: 2,300 kg with uniformly distributed load The specified shelf load is only valid in combination with upright profile 90|20 02x Locking pins, used Version: fully galvanised For securing the cross beams against accidental lifting out

Būklė: geras (naudotas), Technical specifications for pallet racking beams: Racking system: META (Thyssen) Gkedjlnbp Espfx An Hoc Scope of delivery includes: 01x pallet racking beam, used Color: orange Beam type: HN 100|20 Box profile: 100 x 50 mm Connector: 4 HK (hooks) Clear span: 3,300 mm 02x safety pins, used Version: fully galvanized For securing the cross beams against inadvertent lifting out

Būklė: geras (naudotas), Dimensions: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical data for the workbench frame: Manufacturer: Jung Heinrich Model: T Scope of delivery includes: 02x Workbench legs, used Material colour: blue Leg height: 1,000 mm Leg depth: 1,100 mm Leg profile: 100 x 65 mm Incl. horizontal and diagonal braces, base plates Legs are pre-assembled (welded lattice structure) 02x Workbench beams, used Material colour: yellow Box profile: 120 x 50 mm Beam type: HN 120|25 Clear span: 2,700 mm 04x Safety pins, used Finish: fully galvanized 01x Chipboard, 2nd grade, used Chipboard thickness: 38 mm Chipboard width: 2,900 mm Chipboard depth: 1,100 mm Chipboard may be supplied in two sections 08x Self-drilling screws, new Godslnfi Repfx An Hskc Finish: galvanized Dimensions: 6.3 x 70 mm The images are for illustrative purposes only. Material colour may vary. - Workbenches are supplied disassembled; - Workbench legs are pre-assembled; - Usual production time is approx. 3 - 5 working days.

Būklė: naujas, Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Included in delivery: 01x Pallet rack beam, new Material color: RAL 7035 light grey Box profile: 80 x 40 mm Gjdpfx Anjku A Epj Hjkc Beam type: TRV1-240-084-30CE Connector: 5-hook 2,400 mm clear width 02x Safety pins, new Design: completely galvanized To secure the cross beams against unintentional lift-out

Būklė: geras (naudotas), Technical data for pallet rack beam: Racking system: Link 51 Type: Boltless XL Scope of delivery includes: 01x pallet rack beam, used Material color: yellow Box profile: 80|53 x 45|25 mm Beam type: 4 BST Step profile: H 28 mm, W 20 mm Bracket: 3 HK (hooks) Clear width: 2,700 mm Maximum load capacity per pair of beams: 900 kg with evenly distributed load 02x safety pins, used Design: fully galvanized For securing the longitudinal beams against unintended lifting Further information on the pallet rack beam: Beam type 4 BST is used to support chipboards, steel panels or similar, which then lie approximately flush with the upper edge of the beams. Gsdpokvnm Ajfx An Hokc This results in no loss of height, and additionally, the front of the step beam protects the decks or infill segments from damage. The beams are not intended for pallet storage, but rather as picking levels; i.e., for storing boxes, small parts, etc.

Būklė: geras (naudotas), We offer here a second-choice depth beam from the manufacturer SSI Schäfer for sale. The depth beam is suitable for a frame depth of 850 mm and a maximum beam width of 50 mm. Gksdpohzt Epjfx An Hsc The scope of delivery includes: 01x depth beam, second choice Material color: Sendzimir galvanized Total length: approx. 865 mm For frame depth: approx. 850 mm Clear support width: approx. 748 mm Technical data for the depth beam: Shelving system: SSI Schäfer Profile dimension: C 60 x 40 x 8 mm Beam support: approx. 52 mm Material thickness: approx. 2.00 mm Unit weight: approx. 2.15 kg General information about the item: This article is only offered for pick-up. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on the delivery location and scope.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg Gksdpfx Ajmhhf Sen Hjc - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Gkedpfxsmhhl Ho An Hjc Ex works price: Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) Gsdpfxemhh Dto An Hjkc - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) Gedpfxemidyfs An Hjkc - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: geras (naudotas), Included in delivery: 01x Depth support, used Racking system: SSI Schäfer Material colour: blue Total length: approx. 1,060 mm For upright depth: approx. 1,050 mm Clear support width: approx. 928 mm Profile dimensions: U 50 x 50 mm Beam support: approx. 65 mm Material thickness: approx. 3 mm Unit weight: approx. 3.53 kg The depth support is suitable for the following beam profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm IPE: 100 x 55 mm INP: 120 x 60 mm Box section widths: - 40 mm - 50 mm - 60 mm Godolq Ewwopfx An Hskc General information about the item: This item is only available for collection. Any additional transport or shipping of this item will incur extra costs, which can be requested from us separately depending on the delivery location and/or scope of delivery.

Būklė: naujas, Technical specifications for pallet racking beam: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Pallet racking beam, new Material colour: RAL 2004 orange Godpfxelwkwds An Hskc Box profile: 130 x 50 x 1.5 mm Beam type: PNB0413 S355MC Connector: 4 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Safety pins, new Version: fully galvanized For securing the longitudinal beams against accidental removal

Būklė: geras (naudotas), Technical data for shelf connector: Gedpfxjmqk Svo An Hskc Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x Shelf connector, used For rack spacing: 250 mm Total length: 250 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Material finish: Sendzimir galvanized Bore diameter: 11 mm Weight: 0.330 kg | each 02x Bolts M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply. These can be quoted separately upon request depending on the delivery location and order volume.

Būklė: geras (naudotas), Technical data for the rack connector: Racking system: Stow Type: Pal Rack NS Included in the delivery: 01x Rack connector, used for rack spacing: 360 mm Total length: 360 mm Profile section: U 35x25 mm Gedpfx Anjmqldkj Hskc Material thickness: approx. 2.00 mm Material finish: Sendzimir galvanized Hole diameter: 11 mm Weight: 0.480 kg | each 02x Bolts M10 x 35 mm 02x Nuts M10 General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will be incurred, which can be specified upon request depending on the place of delivery or scope of delivery.