Minimax Storvirinys pirkti naudotą (133)

Būklė: naujas, Gamybos metai: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and anodised aluminium sliding table Rcjdpfx Ajxw N N Hea Dod Article Number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Net weight approx.: 690 kg Extraction connection Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (motor rating): 7.0 kW Rated duty type, main drive motor: S6 Duty cycle, main drive motor: 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Explanation max. cutting height: Independent of scorer Saw blade diameter: 400 mm Explanation saw blade diameter: Independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring saw blade diameter: 120 mm Scoring saw blade speed: 9200 rpm EQUIPMENT Equipment Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring saw motors Edging frame Material roller on edging frame Rip fence with round bar guide Stops: Two professional flip stops Edging shoe Eccentric clamp Table width extension Table length extension Overhead blade guard Motorised height adjustment and tilting of the saw unit, digital tilt display Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Planer-thicknesser Minimax FS 41es TERSA Maximum equipment for professionals. Article number: 5503431 Brand: Holzkraft / SCM Helical-toothed steel feed roller for consistent and even material feed, allowing planing from as little as 0.2 mm chip removal (at minimum workpiece thickness of 3 mm) – ideal for economical planing of precious hardwoods. Models with TERSA cutterblock enable blade changes within seconds and operate with particularly low noise. Material feed with two speeds. Extra-long planer tables for easy and precise alignment of workpieces. Tables made from cast iron, annealed and stress-free for durability and long-term flatness. Simultaneously opening, rear-hinged jointer tables for short setup times. Thickness table adjustment via handwheel with digital height display. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product): Approx. 2200 mm Width/depth (product): Approx. 1160 mm Height (working): 905 mm Net weight: Approx. 450 kg Jointer Total table length: 2200 mm Jointer fence length: 1200 mm Jointer fence height: 150 mm Max. jointer cutting depth: 5 mm Dust extraction Thicknessing extraction port diameter: 1 x 120 mm Thicknesser Table length: 775 mm Working height max.: 240 mm Table width: 410 mm Max. thicknessing cutting depth: 5 mm Min. working height: 3 mm Electrical Data Main drive motor power: 5 kW Mains frequency: 50 Hz Operating voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5000 rpm Cutterblock diameter: 95 mm Maximum planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round rod guide & auxiliary fence Two feed speeds TERSA cutterblock Rcsdpfx Aaelht Hte Dod Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2026, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 With tilting saw blade and anodised aluminium sliding table Article number: 5504932 Brand: Holzkraft Heavy-duty worktable made from heavily ribbed grey cast iron – ensures maximum stability and durability Robust base frame made of welded steel – guarantees high torsional rigidity and vibration-free operation Precision sliding table made from anodised aluminium – smooth operation via high-quality ball bearing system Carbide guide rails – for lasting precision and minimal maintenance Tilting grey cast iron saw unit with double segment guidance – exact zero-point tilt for utmost cutting accuracy Sturdy rip fence with round bar guide Equipped with adjustable eccentric hold-down device Integrated mitre cutting device on the sliding table – for fast and precise mitre cuts Scoring unit with powerful, separately driven motor Supplied with high-quality crosscut frame – includes heavy-duty telescopic fence, integrated roller for easy loading and unloading, angled scale for comfortable reading, and practical eccentric clamp for secure workpiece holding Saw blade speed adjustable in two stages Practical saw blade pendulum guard TECHNICAL DATA Dimensions and Weight Weight (net) approx. 670kg Extraction Connection Extraction port diameter: 120mm Extraction port diameter (saw blade guard): 80mm Electrical Data Connection voltage: 400V Mains frequency: 50Hz Scoring motor power: 0.65kW Output power (main motor): 7.0kW Main motor duty cycle (rated operation): S6 Main motor duty cycle: 40% Sliding Table and Worktable Sliding table length: 3200mm Sliding table width: 360mm Sliding table height: 175mm Table length: 1000mm Table width: 560mm Table height: 900mm Saw Unit Cutting width with rip fence: 900mm Max. crosscut width left of saw blade: 3200mm Rcedoxw N Sbjpfx Aa Dod Max. crosscut length: 3200mm Saw blade tilt: 90° - 46° Max. cutting height at 90°: 136mm Max. cutting height at 45°: 97mm Note regarding max. cutting height: Independent of scorer Saw blade diameter: 400mm Note regarding saw blade diameter: Independent of scorer Saw blade speed: 3500/5000rpm Scoring Unit Scoring saw blade diameter: 120mm Scoring saw blade speed: 9200rpm Features Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table Crosscut frame Material support roller on crosscut frame Rip fence with round bar guide Stops: Two professional flip stops Crosscut shoe Eccentric clamp Table extension Table widening Saw blade pendulum guard Manual height adjustment and tilting of saw unit Location: ex stock 54634 Bitburg - available immediately -

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Rjdpfxezg Ty Uj Aa Docd Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 210 mm, ašies skersmuo: 30 mm, obliavimo plotis: 260 mm, darbinio aukščio: 210 mm, bendras plotis: 2 350 mm, bendras aukštis: 900 mm, bendras ilgis: 1 250 mm, drožlių pašalinimas: 100 mm, SCM MiniMax C260E 5-in-1 Multi-Function Machine Specification: • Technical condition – after inspection, machine ready for operation • Manufacturer – SCM • Model – MiniMax C 260 E • Planer working width – 260 mm • Thicknesser working height – 210 mm • Planer table length – 1250 mm Rjdpex Rb Htofx Aa Djcd • Motors: 3 x 1.5 kW • Single-phase machine (230V) – conversion to 3-phase possible for an additional 2000 PLN • Motor brakes • 3-knife cutter block for conventional knives • Noise-reducing combs • Manual up/down adjustment • Thicknesser cutterblock speed – 4200 rpm • Spindle moulder spindle – 30 mm • Max saw blade diameter – 250 mm • Circular saw spindle – 30 mm • Max saw blade diameter – 250 mm • Sliding table length – 90 cm • Original paintwork • Complete set of safety mushroom buttons • Dust extraction ports – 100 mm • Weight approx. 300 kg • Year of manufacture – 1998 • Overall dimensions 120 x 235 x 90 cm (L x W x H) Additional information: • The photos shown represent the actual condition of the item for sale • Possibility to run and inspect the machine on site

Būklė: naudotas, 1. Kraštų apdirbimo staklės CASOLIN Mega 230/4 2. Kompresorius Ceccato P 270 11 X 3. Kalibravimo staklės SICAR Meta 1 / Meta 2 4. Kraštų apdirbimo staklės WEINIG Quattromat 23/23P – instrukcija + katalogas 5. Presas ORMA NPC 6/95 Rcsdpfxekvnhwj Aa Djd 6. Kalibravimo staklės SCM CL 95-110 7. Kalibravimo staklės SCM CL110K RT – CL110K RR – 2 vnt. 8. Kalibravimo staklės COSTA CK 950350 9. Dažymo staklės GIARDINA G02/05 10. Presas ITALPRESSE SCF/4-B 11. Kraštų apdirbimo staklės MAGIC Forma 180 – 2 vnt. 12. Juostinis pjūklas CENTAURO SP400/600/700 13. Kraštų apdirbimo staklės MAGIC Recta 180-220 14. Kraštų apdirbimo staklės WEINIG Unimat 14K 15. Juostinis šlifavimo staklės SOCOMEC LN210/LN260/LN300 16. Kraštų apdirbimo staklės SICAR V4 17. Presas ITALPRESSE UT/6-P 18. Presas ITALPRESSE SCF/6-J 19. Storio reguliavimo staklės SAC RS53s/RS63s + katalogai 20. Kraštų apdirbimo staklės SCM P64 B 21. Kraštų apdirbimo staklės SCM Sintex – 3 vnt. 22. Šoninų įpjovų frezavimo staklės TSG2T 23. Juostinis šlifavimo staklės SAMCO Unilev 150 24. Presas SORMEC 2000 T90 serija 25. Atpjovimo staklės OMGA T50-350 – 2 vnt. 26. Spaustuvas TIGER 3 stūmokliai 27. Atpjovimo staklės PEGIC F315/R300 28. Kalibravimo staklės SCM Sandya5 – instrukcija + katalogas 29. Kalibravimo staklės SCM UNO CCS – instrukcija + katalogas – 2 vnt. 30. Kalibravimo staklės SBF Stefani 50/54/56/58 31. Dvigubi atpjovimo staklės OMS ok 330 / ok super 350 32. Briketavimo staklės POR Standard 33. Kalibravimo staklės CB 2N RR1T 1100 34. Daugiapjovliai diskiniai staklės SICAR MS30 35. Kompresorius MOTTEI SR120/140 36. Kompresorius ABAC Genesis 15 37. Atpjovimo staklės UNIVER 400IP (Pertici s.p.a.) 38. Dvigubi atpjovimo staklės OMGA TR2A 39. Briketavimo staklės COMAFER Dinamic mod. 110N 40. Kraštų apdirbimo staklės FUTURA Modul 4 41. Kraštų apdirbimo staklės Futura Modul 180 – 220 42. Kraštų apdirbimo staklės GRIGGIO G18/G22 Quadro 43. Presas TIGER TR/6-F 44. Presas ORMA Omnia 30/13 45. Kalibravimo staklės SCM Sandya10 RR 1100 – instrukcija + elektrinė schema 46. Kompresorius BALMA 47. Juostinis šlifavimo staklės COMEC LN-LS (kėdėms) 48. Kompresorius GENESIS-OASIS 5,5-11 kW – (anglų kalba) 49. Kalibravimo staklės CB 2N R+RT 1100 50. Kalibravimo staklės Sandya 3 51. Briketavimo staklės POR Junior (nuskaitymas) 52. Kalibravimo staklės VIET Challenge 211 – instrukcija (nuskaitymas) 53. Kalibravimo staklės VIET Target 211 (nuskaitymas) 54. Dulkių surinktuvas MAPELLI GM 36 Plus (nuskaitymas) 55. Kampinių pjūvių staklės CASOLIN Astra 56. Kraštų apdirbimo staklės MAGIC Forma 220 – atsarginių dalių katalogas, elektrinė schema 57. Storinimo staklės FELDER A741 – naudojimo instrukcija 58. Spaustuvas ITALPRESSE Program 30 (nuskaitymas) 59. Spaustuvas ITALPRESSE Falcon/S; Naujas Program (nuskaitymas) 60. Storinimo staklės PAOLONI PF2740 – PF2950/PF400 - PF500 61. Storinimo staklės CASADEI Syncro 62. Optimizuojantys staklės CURSAL TRVE550 (nuskaitymas) 63. Šepečių staklės SORBINI T/20-MR 64. Storinimo ir šlifavimo staklės MiniMax FS41 65. Storinimo staklės SCM Sintex NTE (nuskaitymas) 66. Krašto formavimo staklės OMB21; OMB1 ES1; OMB1 ES2; OMB1 ES2B 67. Kraštų apdirbimo staklės FUTURA Krono 180/220/240 68. Variatorius MEC V.4; V.8 69. Storio reguliavimo staklės SAC S53/S63 - + katalogas ir elektrinė schema 70. Storinimo staklės FUTURA Junior 180-220 – instrukcija ir elektrinė schema 71. Šepečių staklės SORBINI VS/34-AC 72. Kalibravimo staklės VIETMAC PL/84 – Kombi 73. Kompresorius Atlas Copco GX 2-7 EP; G 7-15 (su elektroniniu v

Gamybos metai: 2011, būklė: beveik kaip naujas (naudotas), Prosimy zwrócić uwagę, że na sprzedaż przeznaczona jest cała fabryka wraz z gruntem oraz budynkami! Lista urządzeń dla linii produkcyjnej pelletu nr 1 (z linią suszącą) Nr Nazwa urządzenia / Opis LINIA SUSZENIA: - Podajnik bel – długość 9 m - Rozdrabniacz Rotogrin RSC B 36-132 - Przenośnik zgrzebłowy do mokrego surowca – długość 12 m - Przenośnik ślimakowy do mokrego surowca V500 – 4 kW - Cyklon suszący z dozownikiem obrotowym – 4 kW - Wentylator wyciągowy suszarni – 55 kW - Piec z kominem awaryjnym – 2,2 kW - Bęben suszarni SBP-2500 – 5,5 kW - System dozowania paliwa z podajnikiem + palnik – 5,9 kW - System detekcji zapłonu - System gaszenia - Instalacja elektryczna, system czujników, okablowanie - Szafa sterownicza i automatyka Rozdrabniacz do słomy Passat 3 x 15 kW Młyn bijakowy ANDRITZ OPTI 900 – 250 kW, 3000 obr./min Filtr JESMA EFF 64/2400 WB z wentylatorem 4 bary Redpeim I Ruefx Aa Djcd Zbiornik buforowy z podajnikami Kondycjoner ANDRITZ CM 1101 – 11 kW, 750 obr./min Granulator PM 30 ANDRITZ – 315 kW, 1500 obr./min Automatyczny system smarowania rolek Chłodnica pelletu Przesiewacz MOGENSEN G 1014 Zestaw tras transportowych dla linii produkcyjnej (podajniki pneumatyczne, przenośniki zgrzebłowe i kubełkowe) System detekcji iskier MINIMAX z centralą sterującą Panel sterowania z oprogramowaniem Szafy zasilająco-sterownicze, okablowanie Lista urządzeń dla linii produkcyjnej pelletu nr 2 Nr Nazwa urządzenia / Opis Podajnik bel – długość 9 m Rozdrabniacz Rotogrin RSC B 36-132 Młyn bijakowy ANDRITZ OPTI 900 – 250 kW, 3000 obr./min Filtr JESMA EFF 64/2400 WB z wentylatorem – 4 bary Kondycjoner ANDRITZ CM 1101 – 11 kW, 750 obr./min Granulator PM 30 ANDRITZ + system smarowania – 315 kW, 1500 obr./min Podajniki pneumatyczne od młyna bijakowego do filtra Szafy zasilająco-sterownicze, okablowanie

Būklė: naudotas, Gamybos metai: 2012, Wheel diameter - max. 300 mm Rodpfx Ajx R U Hasa Dscd Wheel width 320 mm Module - max. 10 Module - min. 0.5 Helix angle - max. 45° Frequency 50 Hz Voltage 400 V Main fuse 125 A X-axis 270 mm Y-axis 250 mm Z-axis 320 mm A-axis +/- 45° B-axis 360° C-axis 360° Total power requirement 89 kW Machine weight approx. 23.5 t Space requirements approx. 11.2 x 5.5 x 2.9 m Automated Oil centrifuge station EWAB workpiece storage system Hoffmann coolant filtration unit HSF 100 SE/K Minimax fire suppression system W+W air filtration system Promot Automation "Cellmaster" (3 cells), year of manufacture 2019