Mep Shearline Flexiplus pirkti naudotą (180)

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2950 x 25.4 x 0.9 mm Machine weight: approx. 0.4 t Isdpfx Aefg E H Rof Hetk Dimensions (LxWxH): 1.5 x 0.9 x 1.5 m Semi-automatic function: The vice closes and the motor starts, the saw head lowers for cutting, the motor switches off after the cut, the saw head lifts, and the vice opens. Some features: - New centralized control console mounted on a pivoting arm - Next-generation hydraulic control system, highly efficient and low energy consumption - Base frame with extendable coolant tank The machine fully complies with all CE regulations!

Būklė: naujas, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Vice opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 485 kg Space requirement approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual operation, equipped with an MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw bow lowers for the cut – Motor stops – Saw bow lifts – Vice opens. Semi-automatic dynamic system (manual lowering of the saw arm to the desired position and cycle start via the hand switch.) Key features: - New centralized control console mounted on an articulated arm, allowing the operator to access controls easily from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and operation control light. - Display shows: * Diagnostics (messages in the user's language) Iedjfg E H Sepfx Af Hjtk * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Time required for the performed cut * Saw motor current draw * Blade tension * Blade speed * Numeric display of head position. - Manual 24-V cycle switch handle, IP55 rated. - Complete program for all special cutting cycles. - Option to set up additional special cutting cycles for specific applications. - Latest-generation hydraulic control unit, highly efficient with low energy consumption. - Large worktable with turntable on roller bearings, 265 mm with preloaded thrust bearings, installed. - Dual blade speed (36/72 m/min.) with control - Prepared for the installation of an electronic inverter for stepless variation of blade speed from 20 to 90 m/min. - Programmable stroke of the saw arm directly from the control panel for adaptation to the material being cut. - Clamping device adjustable to the left and right, with quick-release vice. - Manual blade tension control with electronic converter display on screen. - Base frame with extendable coolant tray. - Electric coolant pump for band cooling and lubrication. - Preparation for the installation of a minimal lubrication system for the saw band (optional), in addition to standard lubrication with emulsified oil. - Chip cleaning brush. - Machine is designed for pallet truck transport. - Length stop for repetitive cuts of equal length. - Material support arm with roller, for securing the loading platform. - Bimetal bandsaw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering is performed by the saw’s own weight, compensated by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feed. Electrical control panel (marked wiring connections, indicator light for operational readiness, main safety switch equipped with padlock, changeover or speed switch, emergency stop, thermomagnetic protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vise with quick-clamping device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubrication of the bandsaw blade. Chip removal brush. Adjustable precision stops for repeated cuts of equal length. Machine designed for pallet truck transport. Bimetal bandsaw blade for solid and profiled material. Itsdpefg E H Tofx Af Hok Tools and operating manual.

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15/30/45/90 rpm Total power requirement: 1.8/2.5 kW Machine weight: approx. 0.38 t Space requirements: approx. 0.8 x 1.0 x 1.85 m Itjdefgpdlspfx Af Hjk Manual vertical circular saw for mitre cuts from 60° left to 45° right.

Būklė: geras (naudotas), Gamybos metai: 1998, pjūklo disko skersmuo: 300 mm, For sale is a MEP Tiger 300, a high-quality circular saw for metalworking applications. This machine was built in 1998 but remains in good condition. It is perfectly suited for workshops and production environments requiring a reliable and precise sawing solution. Machine features: Manufacturer: MEP (Mecchia Eredi Pio) Model: Tiger 300 Year of manufacture: 1998 Saw type: Semi-automatic/manual circular saw Blade diameter: 300 mm Cutting capacity: Suitable for round materials, square profiles, and mitre cuts Cutting angles: 90° and 45°, with mitre cuts possible in both directions Itodpfx Afsv Tlcrs Hjk Materials: Ideal for cutting iron, steel, and other metals Condition: Good condition Coolant supply: Integrated cooling system for improved cut quality and extended blade life

Būklė: naujas, Gamybos metai: 2024, * Manual cutting cycle * Automatic cutting: (via selector switch) with stepless adjustment of lowering speed and adjustment of cutting pressure via compensation spring * Stable, torsion-resistant and low-vibration saw frame made of cast steel * Large, easily adjustable and mounted rotary table, rotary table centered by central axis pin with indexing at 0° / 45° / 60° and internal table locking for intermediate angles * Quick-release vice * Carbide band guides for maximum cutting precision * Hydraulic unit for saw band tensioning and monitoring, with indicator on the pressure gauge * Clearly arranged control panel with all operating elements * Base frame, coolant tray, coolant pump, swarf brush * Cutting diameter: 250 mm * Cutting width: 280 mm * Saw band dimensions: 2950 x 27 x 0.9 mm * Maximum vice opening: 285 mm * Band speed: 36 / 72 m/min * Cutting capacity at 90 degrees: round 250 mm * Cutting capacity at 90 degrees: square 220 mm * Cutting capacity at 90 degrees: flat 280 x 220 mm * Cutting capacity at 60 degrees: round 120 mm * Cutting capacity at 60 degrees: flat 140 x 80 mm * Cutting capacity at 60 degrees: square 80 mm Itjdpfsftmxvex Af Hjk * Cutting capacity at 45 degrees: round 200 mm * Cutting capacity at 45 degrees: flat left 220 x 200 / right mm * Cutting capacity at 45 degrees: square left 200 / right 170 mm * Machine weight: approx. 0.4 t * Space requirement: approx. 1.8 x 1.3 x 1.8 m

Būklė: naujas, Saw blade diameter: 370 mm Cutting capacity at 90 degrees, round: 120 mm Cutting capacity at 90 degrees, square: 110 mm Itsdpfxjfg Rldo Af Hek Cutting capacity at 90 degrees, rectangular: 180 x 100 mm Working height: 925 mm Saw blade speed: 15 - 150 rpm Total power requirement: 5.5 kW Machine weight approx.: 0.615 t Space requirement approx.: 1.4 x 1.4 x 2.0 m Electropneumatic - Semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. Standard equipment: - Saw head glides on recirculating ball linear double guides - Three-stage gearbox - Infinitely variable speed 15–150 rpm - Vice opening: 190 mm - Saw head stroke programmable directly from the control panel for adaptation to the material being cut - Pneumatic vertical vice - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile materials - Vice with counter-clamping device for double workpiece clamping - Base frame with removable coolant tray - Chip removal brush - Length stop for repeat cuts of equal length - Material support arm, also provides connection option for roller conveyor/loading side

Būklė: naujas, Saw blade diameter: 130 mm Cutting capacity at 90 degrees (round): 130 mm Cutting capacity at 90 degrees (square): 120 mm Cutting capacity at 90 degrees (flat): 180 x 100 mm Cutting capacity at 45 degrees (round): 115 mm Cutting capacity at 45 degrees (square): 100 mm Iodpfohpktysx Af Hstk Cutting capacity at 45 degrees (flat): 120 x 100 mm Motor: 3.3 / 4.4 kW Speed: 1400 / 2800 rpm Machine weight: approx. 1060 kg Dimensions (L x W x H): 2.5 x 1.8 x 1.85 m TIGER 402 CNC HR, automatic electromechanical vertical circular saw for use with carbide-tipped saw blades, designed for series cuts from 45° right to 60° left.

Būklė: naujas, Cutting diameter: 330 mm Cutting range at 90° (flat): 510 x 320 mm Cutting range at 90° (square): 320 x 320 mm Speed range: 40 / 80 m/min Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Ijdefg E Ibopfx Af Hotk Weight: 670 kg Semi-automatic, electro-hydraulic bandsaw for cuts from 60° left to 60° right. Versatile machine with a 4640 x 34 x 1.1 mm blade for cutting pipes, profiles, and beams up to a maximum cutting capacity of 510 x 320 mm at 0°. The operator console on a swivel arm allows comfortable and safe operation from any position. Electronic inverter for stepless adjustment of the blade speed from 15 to 100 m/min. Large rotary table with a diameter of 280 mm, featuring an engraved, precise fine scale, easily adjustable and mounted.

Būklė: naudotas, Saw blade diameter: 350 mm Cutting range at 90° (round): 120 mm Cutting range at 90° (square): 105 mm Cutting range at 90° (flat): 180 x 70 mm Cutting range at 45° (round): 120 mm Cutting range at 45° (square): 100 mm Iodpfxofc T Ugs Af Hotk Cutting range at 45° (rectangular): 135 x 60 mm Saw blade speeds: 1700 / 3400 rpm Total power requirement: 1.5/2.2 kW Machine weight approx. 0.285 t Dimensions (L x W x H): 1.2 x 1.4 x 1.4 m Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide-tipped blade. The machine enables mitre cuts from 45° right to 45° left. The vertical alignment allows sawing operations with the head tilted from 0° up to 45° to the left.

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees: round 120 mm Cutting capacity at 90 degrees: square 105 mm Cutting capacity at 90 degrees: flat 180 x 70 mm Cutting capacity at 45 degrees: round 120/110 mm Cutting capacity at 45 degrees: square 10/95 mm Cutting capacity at 45 degrees: flat 135 x 60 mm Motor: 2.5 kW Speed: 1700 / 3400 rpm Machine weight: approx. 600 kg Dimensions (L x W x H): 2.0 x 1.5 x 1.7 m COBRA 352 NC 5.0, automatic circular saw with semi-automatic function, designed for sawing aluminium and light metal alloys using carbide-tipped circular saw blades. The machine is capable of mitre cuts from 45° right to 45° left. By adjusting the vertical orientation, it is possible to perform cutting operations with the head inclined between 0° and 45° to the left. Numerically controlled circular saw equipped with a new Windows CE-based control unit, specifically developed by MEP for automatic machines. Ijdpfx Aefg Rlgjf Hotk

Būklė: naudotas, Gamybos metai: 1999, Diskinio pjūklo skersmuo: 275 mm Pjovimo sritis prie 90°: apvalus 80 mm Pjovimo sritis prie 90°: kvadratas 70 mm Pjovimo sritis prie 90°: plokščias 100 x 60 mm Pjovimo sritis prie 45°: apvalus 70 mm Pjovimo sritis prie 45°: kvadratas 60 mm Pjovimo sritis prie 60°: plokščias 80 x 50 mm Spaudimo sritis: 110 mm Sūkių dažnis: 45 / 90 aps./min Bendras galios poreikis: 0,5 kW Staklių svoris: apie 0,07 t Iedpfx Afjl R Nnns Hjtk Užimama vieta: apie 900 x 700 x 1600 mm Rankinis šalto diskinis pjūklas su: - Staklių pagrindas - Atraminė liniuotė 1500 mm

Būklė: naujas, Saw blade diameter 350 mm Iodpofg Rlbsfx Af Hjtk Cutting capacity at 90 degrees: round 115 mm Cutting capacity at 90 degrees: square 95 mm Cutting capacity at 90 degrees: rectangle 180 x 95 mm Working height 925 mm Saw blade speeds 15/30/45/90 rpm Total power requirement 1.8/2.5 kW Machine weight approx. 0.41 t Space requirement approx. 0.8 x 1.0 x 1.85 m Electropneumatic - semi-automatic vertical circular saw with microprocessor control for mitre cuts from 60° left to 45° right. With linear guidance of the saw head. - New system with head gliding vertically on linear guides with ball bearing slide rails at the front. - Double gearbox drive for high transmission power - 4 cutting speeds: 15/30/45/90 rpm - Vice opening 190 mm - Stroke movement of the saw head programmable directly from the control panel, allowing adjustment to the material being cut - Pneumatic vertical vice - Saw blade HSS DMO 5 ø 350x32x2.5 for solid and profile material - Vice with counter-clamping device for double workpiece clamping - Base frame with removable coolant tray - Swarf removal brush - Length stop for repeat cuts - Material support arm, with connection option for roller conveyor/loading side - Rotary table with additional central axis

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Itedpfx Aofg Rlcsf Hek Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Būklė: visiškai atnaujintas (naudotas), MEP Syntax 25 | Universalus centras plieno strypams | Atnaujinta mašina MEP Syntax 25 yra atnaujintas universalus centras, skirtas gofruotojo plieno apdirbimui, suprojektuotas efektyviam darbui su Ø8 mm iki Ø25 mm skersmens strypais. Šią mašiną visiškai patikrino MEP specialistai, todėl ji yra puikus sprendimas įmonėms, ieškančioms patikimos, aukštos kokybės ir atnaujintos įrangos, už gerą kainą. Originaliai pagaminta 2004 m., o 2026 m. profesionaliai atnaujinta, ši MEP Syntax 25 buvo išvalyta, perdažyta ir visiškai patikrinta, kad būtų užtikrintas puikus veikimo būklė ir patikimas našumas nuo pat pirmojo naudojimo. Techninės specifikacijos - Gamintojas: MEP - Modelis: Syntax 25 Universalus centras - Mašinos tipas: Universalus centras, skirtas plieno strypams - Darbinė talpa: 1 × Ø25 mm; 2 × Ø16 mm - Skersmenų diapazonas: Ø8–Ø25 mm - Atnaujinimo metai: 2026 - Būklė: Atnaujinta – Puiki (išvalyta, perdažyta ir patikrinta MEP specialistų) Priedai - Strypų laikymo zona, iki 14 metrų ilgio - Rankinis padavimo sistema - Surinkimo padėklas, 12 × 2,5 metro Privalumai ✓ Atnaujinta patyrusių MEP specialistų. ✓ Puiki būklė, leidžianti nedelsiant pradėti gamybą. ✓ Rentabili alternatyva, lyginant su naujos įrangos pirkimu. Ieškote naudotos MEP Syntax 25, atnaujinto universaliojo centro armatūrai arba naudotos įrangos, skirtos gofruotojo plieno apdirbimui? Peržiūrėkite mūsų platų naudotos ir atnaujintos įrangos katalogo, skirto plieno pramonei, pasirinkimą, kruopščiai patikrintą, kad užtikrintume maksimalų patikimumą ir našumą. Darbinė talpa: 1xØ25 mm, 2xØ16 mm Skersmenų diapazonas: Ø8–Ø25 mm Atnaujinimo metai: 2026 Būklė: Atnaujinta – Puiki (išvalyta, perdažyta ir patikrinta MEP specialistų) Ijdpfozl Ef Tjx Af Hstk Priedai: Strypų laikymo zona, iki 14 m, rankinis padavimo sistema, surinkimo padėklas, 12 × 2,5 m

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Peilio pasvirimas: -45° / +45°. Ijdpsx Hw Sqjfx Af Hetk Maksimalus spaustuvo atidarymas: 180 mm Nebegalima tiekti ilgis: 385 mm Disko dydis: 350 mm Peilio sukimosi greitis: 1700 / 3400 aps./min. - 2 greičiai

Būklė: naudotas, MEP 40 Straightening and Cutting Bench Bar Capacity: - n.1 Ø 40 mm - n.2 Ø 32 mm - n.3 Ø 26 mm - n.4 Ø 20 mm - n.5 Ø 16 mm 22 Fy = 600 N/mm² – ft = 650 N/mm² Minimum cutting length: 800 mm Maximum length: 12,000 mm Isdpfx Afjvtx Eye Hetk Measurement tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Measurement evacuation speed: 2.2 m/s Number of compartments: 5 + 5

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11900715/C, pjūklo disko skersmuo: 350 mm, padavimo ilgis X ašis: 180 mm, padavimo ilgis Z ašis: 170 mm, bendras ilgis: 2 210 mm, bendras plotis: 1 100 mm, bendras aukštis: 1 550 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 120 mm, Apvalaus plieno pjovimo diapazonas ties 45°: 120 mm, įvesties srovės tipas: trifazis, sukimosi greitis (min.): 15 aps./min, sukimosi greitis (maks.): 90 aps./min, pjovimo aukštis (maks.): 170 mm, bendras svoris: 530 kg, pjūklo disko greitis: 90 aps./min, įėjimo įtampa: 400 V, Kvadratinio plieno pjovimo diapazonas 45° kampu: 100 mm, Kvadratinio plieno pjovimo diapazonas prie 90°: 105 mm, pjūklo pavara: 2 200 W, pjovimo skersmuo: 120 mm, pjūklų disko skylė: 32 mm, 2000 MEP Cobra 350AX Automatinė diskinė šaltai pjaunanti pjūklas – Efektyvus metalo pjovimas pramoninei gamybai Galima įsigyti: MEP Cobra 350AX – tvirtas automatinis diskinis pjovimo įrenginys, puikiai tinkantis pramoninių metalų pjovimo užduotims. Pagaminta 2000 m., geros techninės būklės. Šis įrenginys sujungia rankinį ir automatinį veikimo režimus, reguliuojamus pjovimo nustatymus bei 350 mm skersmens pjūklą, užtikrinančius pastovų, aukštos kokybės pjovimą. 🔧 Pagrindinės savybės: Pjūklo disko dydis: 350 × 32 × 2,5 mm Variklio galia: 2,2 kW Pjūklo sukimosi greičiai: 15 / 30 / 45 / 90 aps./min. Spaustuvo atidarymas: 160 mm Prispaudimo tipas: Pneumatinis Energijos tiekimas: 400V / 3 fazės / 50Hz Rankinis ir automatinis režimai: Taip Pjovimo gylio ir ribotuvo aukščio reguliavimas: Pilnai reguliuojamas Svoris: 530 kg Išmatavimai (I×P×A): 2210 × 1100 × 1550 mm 📏 Pjovimo galimybės: Esant 0°: Apvalus: 120 mm Stačiakampis: 180 × 170 mm Kvadratinis: 105 × 105 mm Itedjwtr Iyopfx Af Hsk Esant 45° į kairę: Apvalus: 120 mm Stačiakampis: 135 × 60 mm Kvadratinis: 100 × 100 mm Esant 45° į dešinę: Apvalus: 110 mm Stačiakampis: 135 × 60 mm Kvadratinis: 95 × 95 mm ⚙️ Pritaikymo sritys: Plieninių profilių, vamzdžių, strypų pjovimas Tinka lengvos ir vidutinio intensyvumo pramoninei gamybai Puikiai tinka metalo apdirbimo, sandėliavimo ir gamybos įmonėms ✅ Kodėl verta rinktis MEP Cobra 350AX? Universalios pjovimo kryptys ir profiliai Dvigubas veikimo režimas (automatinis/rankinis) Kompaktiškas, našus ir lengvai integruojamas į esamą darbo srautą Pneumatinis prispaudimas užtikrina saugumą ir tikslumą Mažos investicijos įvertinant didelę naudą – puikus kainos ir kokybės santykis Parduodama MEP Cobra 350AX Naudotas automatinis diskinis pjūklas Šaltai pjaunanti pjūklas metalui Pneumatinis diskinis pjūklas 350mm diskinė pjovimo staklės Pramoninis diskinis pjovimo įrenginys metalui MEP pjūklas 2000 metų modelis Automatinis metalo pjovimo pjūklas Lietuva Diskinis pjovimo įrenginys plieniniams profiliams 400V pramoninis šalto pjovimo pjūklas Pastaba: *Specifikacijos pateiktos pagal geriausią žinomą informaciją, tačiau negarantuojamos*

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, stalo plotis: 850 mm, stalo ilgis: 570 mm, bendras plotis: 1 265 mm, bendras svoris: 5 500 kg, C rėmo ekscentrinis presas 60 t. NAUJAS Presavimo jėga 60 t Nominalaus išlaikymo taškas 4 mm Iodpfxjxtplts Af Hetk MAKS. UŽDARYTOS FORMOS AUKŠTIS 310 mm EIGOS NUSTATYMAS (PUSIAUTOMATINIS) 20/100 mm Greitis 60 SPM Formos tvirtinimo skylės skersmuo 50 mm Gerklės gylis (nuo skylės centro atgal) 275 mm Ramio eigos reguliavimas 80 mm Ramio matmenys 580 x 350 mm Stalo matmenys 850 x 570 mm Stalo skylės skersmuo 150 mm Stalo aukštis nuo grindų 795 mm Svoris apie 5.000 kg Aukštis 2430 mm Gylis 1370 mm Plotis 1265 mm Variklis 5,5 kW

Gamybos metai: 2026, būklė: naujas, The MATRIX55S is suitable for cutting your reinforcing steel to the desired length (optionally available with the Synclone45S double bender). Itjdpfx Ajm Tqazef Hjk Product information: - Hydraulic motor: 7.5 kW - Synclone45S optional for double bending - 360° rotatable digital control panel - Optional barcode system available - Total weight: 5,200 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), Siūlomas Mepac formų vartytuvas, skirtas palengvinti įrankių formų techninės priežiūros ir remonto darbus. Keliamoji galia: 7000 kg, pasukimo kampas: 90°, staklių matmenys X/Y/Z: apie 1500 mm / 1400 mm / 1000 mm, svoris: apie 500 kg. Yra dokumentacija. Galima apžiūrėti vietoje. Isdpfx Asy E S Epof Hotk

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Stalo aukštis: 850 mm, prisilietimo nuokrypis MPEp: 3,5 μm, ilgio matavimo nuokrypis MPEe: 3,0+L/250 μm, įrenginio aukštis: 1845 mm, elektrinis pajungimas: keturios įžemintos Schuko lizdai 220 V su 16A saugikliu, maksimali galia: 700 VA, temperatūros gradientas erdvėje: max. 1°C/m, reguliariai tikrinama, su kompiuteriu. Galima apžiūra vietoje. Itjdpfoy H I Enex Af Hok

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Šiame pasiūlyme perkate naudotą gamybos sistemą "Summa 1400 FME-p". Pardavimo objektas: 1 x Summa 1400 FME-p Būklė: Tai naudotas įrenginys, kuris gali turėti naudojimo žymių (smulkūs įbrėžimai ar pageltimai). Įrenginys patikrintas dėl funkcionalumo. Bandomosios spaudos rezultatas matomas nuotraukoje. Itedpszb Aktjfx Af Hek Pakuotė ir siuntimas: Įrenginį galite apžiūrėti mūsų darbo metu. Susitarkite dėl skyrimo laiko! Jūrinei transportavimui tinkama pakuotė ir pasaulinis siuntimas galimi pagal užklausimą! Prieš siuntimą ar atsiėmimą bus atliktas funkcionalumo testas ir įrašytas vaizdo įraše. Dėl išsamesnės informacijos galite susisiekti su mumis asmeniškai.

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 500 t, ME-Pressen Portal Straightening Press – 500 t – 2,000 × 850 mm – Stroke 1,300 mm For sale is a hydraulic portal straightening press manufactured by ME-Pressen with a pressing force of 500 t. This machine is specifically designed for straightening and bending operations and features an integrated tool clamping device as well as a parallel guide for bending dies. Thanks to its traversable table, movable cylinder, and robust construction, it is ideally suited for flexible applications in toolmaking and series production. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 500 t ==== General Information - Manufacturer: ME-Pressen - Model: Portal Straightening Press - Type: Portal press - Machine designation: Sliding table press / straightening press - Pressing force: 500 t (5,000 kN) - Machine weight: approx. 25 t - Dimensions (L × W × H): approx. 1,500 × 3,000 × 4,300 mm - Number of operator sides: 3 ==== Working Area - Max. opening width: 1,500 mm - Stroke: 1,300 mm - Min. opening: 200 mm - Table height above floor: approx. 850 mm - Open height: 1,500 mm ==== Table & Movement - Table size: 2,000 × 850 mm - Table hydraulically traversable: 700 mm outward - Table with grid construction - Cylinder horizontally traversable via rack and pinion ==== Speeds - Closing speed: up to 17 mm/s - Opening speed: up to 44 mm/s Iodpfxswgakve Af Hotk - Pressing speed: dependent on load ==== Hydraulics & Performance - Pressure adjustment: 80–500 t via rotary control - Pressure build-up time: max. 3 sec. - Free tear-off force: max. 800 kN - Oil temperature monitoring included - Lubrication via grease nipples ==== Construction & Equipment - Integrated tool clamping device - Parallel guide for bending die - Induction-hardened cylinder - Machine body powder-coated / double-lacquered - T-slots as per customer specifications ==== Operation & Safety - Remote control - Robust construction for industrial applications ==== Precision - Deflection: ≤ 1.2 mm/m (at 70% load) ===== Straightening operations, bending processes, toolmaking, series production, heavy-duty forming Hydraulic press, portal press, straightening press, sliding table press, industrial press, forming press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machine guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the national Brazilian safety regulation NR 12, which is based on these standards. Our key strengths are special-purpose machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics, we mainly use components from leading European manufacturers.

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2004, bendras ilgis: 9 450 mm, bendras plotis: 2 480 mm, pakaba: oras, padangos dydis: 275/70 R 22.5, ratų bazė: 5 590 mm, Gamybos metai: 2004, Įranga: ABS,