Hardinge Talent Slant pirkti naudotą (583)

Būklė: naudotas, The Herbold fine mill PU 500 is suitable for fine grinding plastics as well as soft to medium-hard materials. Laodpfxezy Hmze Am Rsg Drive power: 55 kW Grinding disc diameter: 500 mm Throughput: approx. 200–800 kg/h depending on material and fineness

Būklė: naudotas, Suitable for pre-shredded plastic waste (hard plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. A total of four dryers of this model are available. Laedpfjzy Hf Rsx Am Rjg

Būklė: naudotas, The Herbold fine mill PU 500 is suitable for fine grinding plastics as well as soft to medium-hard materials. Drive power: 55 kW Grinding disc diameter: 500 mm Lsdpfxezy Hcis Am Reag Throughput: approx. 200–800 kg/h depending on material and fineness

Būklė: naudotas, Drive motor 37 kW (can be increased up to max. 75 kW) Rotor diameter 500 mm Laodpfxszy Hbxs Am Rsg Width 600 mm 5 knives, slant cut Housing can be opened, equipped with 2 stator knives Infeed opening 500 x 600 mm

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Laedpfx Amjt Tqy Ee Rjg Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: naujas, garantijos trukmė: 24 mėnesiai, matavimo diapazonas X ašis: 300 mm, matavimo diapazonas Z ašis: 370 mm, bendras svoris: 95 kg, !!! NEW – Systems now also available via Leasing GmbH financing options !!! Leasing Option: We are happy to put you in touch with our leasing partner! ✅ Up to 30% declining-balance depreciation on moveable assets* ✅ Valid for investments from July 2025* ✅ T&S products are fully eligible for subsidies* Modular expandable contour measuring system Optional features upgradable via software update: - UpDown measurement option (diameter measurement) - Surface roughness testing option according to ISO21920!!! - Motorized Y-support table Ledpfjgr Uzcex Am Rjag - Rotational axis for contour and roughness measurement - QS-Stat data output - GAS (Thread Axis Search): thread measurement from internal thread size M1 - ConturoMatic software updates are FREE OF CHARGE!!! Scope of delivery: - Complete mechanics with Y-adjustable table - Integrated control unit - PC W11/64Bit; 24" TFT flat screen; - ConturoMatic software; operating manual - Software for testing and evaluating the following roughness standards – NEW! ISO 21920 DIN EN ISO 4287 (10/1998) DIN EN ISO 4288 (04/1998) DIN EN ISO 11562 (04/1998) DIN EN ISO 13565-1 (04/1998) DIN EN ISO 13565-2 (04/1998) VDA 2006 (07/2002) Stahl-Eisen-Test Sheet (SEP 1940) - Dust protection cover 8988, robust design, water-repellent, customs tariff no. 63079098 Description of Z-axis measurement direction switching: With the measurement direction switch, surface scanning is possible in both directions. This allows internal and external contours to be evaluated relative to each other without loss of the measurement reference. This function can be used without restrictions in fully automated measurement programs. Additional evaluation options include: - Determination of raceway diameters - Diameter determination - Wall thickness measurement - Parallelism measurement - Taper angle measurement - Pitch inspection - Thread inspection Technical data – Contour measurement: Measuring range X: 300 mm Measuring range Z: 375 mm Resolution: 1 nm Measuring systems: optical incremental Uncertainty: +/- (0.9 µm + L/100) µm* [L=mm] Probe force control Measuring speed: 0.1–3.0 mm/s, auto-optimizing Positioning speed: up to 25 mm/s Table load capacity: 35 kg Precision guidance on a hard stone base Technical data – Roughness measurement: Diamond stylus tip: cone R=2 µm/60° Measuring range X: 300 mm Measuring range Z: +/-500 µm Application range: Ra > 0.08 µm | Rz > 0.8 µm Probe force: 7.5 mN Measuring speed: 0.1 mm/s * under defined conditions *Technical specifications subject to change* - Clamping devices not included Customs tariff number: 90318020 - Additional clamping devices available on request - 2 years warranty Images show optional accessories not included in standard scope of delivery. *For legal reasons, we are not permitted to provide legal or tax advice on these matters and the above information should not be regarded as consultation. Please consult your relevant contact person (specialist department or tax advisor) in case of doubt.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyor BÜRKLE easy coater RCL 1300: For single-sided application onto flat surfaces from above Operator side left Touch screen control TP 177 Micro Rubber-coated application roller Hard-chromed metering roller, finely adjustable via worm gear Controlled belt transport with exposed counter-roller for secure workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the application roller Oscillating doctor blade, quickly interchangeable for cleaning Separate, steplessly adjustable frequency-controlled direct drives for application and metering rollers, as well as for transport Reversible metering roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-Ex execution, mounted outside the hazardous area of the machine Mobile version Electrical preparation for integration of the roller coater into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Minimum workpiece length: 400 mm Rubber-coated application roller diameter: 240 mm Chromed metering roller diameter: 172 mm Transport speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Metering roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety features in accordance with CE Incl. control cabinet Weight: approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps Single-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Maximum working width: 1300 mm Laodet Dx U Sjpfx Am Rsg Maximum workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) Power UV lamp: 120 W/cm each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust connection: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300 Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Būklė: labai geros būklės (naudotas), Wide Belt Sander for Calibration and Fine Finishing Manufacturer: SCM Lodpsxqggcofx Am Reag Model: RCS 1st Unit: Calibrating Roller, Steel 2nd Unit: Combination Unit (Roller 60 Sh, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 emergency stops Table extension with 2 rollers, front and rear Sanding pad inserts covered with new graphite cloth Including nearly new sanding belts All documentation included Note – Used Machines: • Technical data and prior sale subject to change. • Prices quoted are ex location – loaded free on truck! • The machine has been cleaned and tested for functionality. • All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 100 kg, bendras aukštis: 1 660 mm, Gamybos metai: 2026, įėjimo įtampa: 230 V, lazerio galia: 20 W, lazerio bangos ilgis: 1 064 nm, aušinimo tipas: oras, įvesties srovės tipas: Oro kondicionierius, Laser for Product Marking – The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark nearly any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, laser marking has become indispensable for permanent identification. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. The software can automatically increment serial and article numbers after presetting. In addition, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber Laser 20W (Optional: 30W, 50W) • Wavelength: 1064nm • Marking field size: 150x150mm (Optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination Lajdpfx Amjzpwmdj Rog • Tower signal light to display operating status • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profiles • 230V power connection • Air-cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660mm (LxWxH) • Weight: approx. 80 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 20 580 h, perforavimo jėga: 41 t, maks. lakšto storis: 2 mm, 2013 m. pagaminta CNC štampavimo staklė. Ši „Pivatic Punching Line PCC80-e TT HT“ staklė skirta plokščių metalo lakštų detalių serijinei gamybai; jos štampavimo jėga siekia 400 kN, o maksimalus ritinio svoris – 5 000 kg. Linija apima du štampavimo skyrius, užtikrinančius lanksčias ir pasikartojančias operacijas. Jei ieškote aukštos kokybės štampavimo galimybių, apsvarstykite galimybę įsigyti mūsų siūlomą „Pivatic“ štampavimo liniją PCC80-e TT HT. Dėl išsamesnės informacijos susisiekite su mumis. • Pritaikymas: Plokščių metalo detalių (plokščių, laikiklių, korpusų, elektros spintelių dalių ir pan.), kuriose reikia išgręžti skyles, išpjauti angas ir padaryti įpjovas, serijinė gamyba • Proceso eiga: Rulonas → išvyniavimas → ištiesinimas → padėties nustatymas → TT štampavimas → HT štampavimas → detalių pjaustymas → iškrovimas/sukrovimas • Techninės specifikacijos: • Lakšto plotis: 60–830 mm • Lakšto storis: 0,5–2,0 mm (galima versija iki 4,0 mm) • Maksimalus ritinio svoris: 5 000 kg • Įrengtoji galia: 20 kW • Maitinimas: 3 x 400 V + PE • Dažnis: 50 Hz • Štampavimo sistema: • TT (Thick Turret): CNC štampavimas su standartiniais kasetiniais įrankiais, skirtais lanksčioms skylėms, išpjovoms ir kontūrams • HT (Hard Tool): Antrasis štampavimo skyrius, kuriame naudojami specialūs įrankiai pasikartojančioms operacijoms atlikti • Reikalingas plotas: • Pagrindinės linijos užimamas plotas: 17,5 x 5,5 m • Papildoma erdvė atliekoms: 1,5 m • Papildoma erdvė HT sekcijai: 1,55 m • Mašinos būklė: Visiškai veikianti ir naudojama gamybai; galima apžiūra ir bandymas Papildoma įranga • Įtraukta: • Ritinių padėties nustatymo vežimėliai • Ritinių išvyniotuvas • Lakštų ištiesinimo staklės • Išvyniavimo/išlyginimo įrenginio ir ritinių vežimėlių valdymo pultas • Pagrindinis valdymo pultas • Pakreipiamas konvejeris, skirtas pasirinktam gaminių iškrovimui • Transportavimo ir sukrovimo modulis • Saugos sistema su stacionariais apsaugais ir fotoelektrinėmis užtvaromis • Valdymo spintelė su hidrauliniu agregatu • Įrankių kasetų vežimėliai • Kietųjų įrankių transportavimo ir saugojimo stotis • Į komplektą neįeina: Ledpszynlxefx Am Rjag • Štampavimo įrankiai • Įrankių kasetės • Kai kuriose nuotraukose pavaizduotas robotas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Unicontrol 12 Consisting of: cut-off saw unit (Pos. A), tenoning and slotting spindle (Pos. C), transfer belt (Pos. I), profiling spindle (Pos. L), profiling spindle (Pos. N), vertical profiling/router unit right (Pos. P). For manufacturing individual parts and elements in frame-based or series production. Comprises a cross-processing unit and a longitudinal-processing unit connected by a transfer belt. Working width: 40–140 mm (see pressure fence left 40–140 mm) Working height: 40–120 mm Workpiece length min.: approx. 275 mm + 1 x end profile length Longitudinal processing: approx. 220 mm + 2 x end profile length Workpiece length max.: 3,500 mm The part dimensions depend on the machine configuration, production method, and tooling setup. A final definition of part dimensions is only possible after receipt, inspection, and approval of the complete and finalized setup drawings. Cross-processing: Table feed motor power: 0.3 kW (0.4 HP) Ledpfx Aoumci Sjm Rjag Feed speed preset for sawing, profiling, and return: 3–25 m/min Vario table (studio window production possible) The clamping length of all tenoning and slotting spindles can be used without tool-free clearance. Workpiece clamping by means of a clamp bridge. Actuated by a clamping cylinder installed under the table. Long stop: NC-controlled, mounted on the slotting table. Studio window feature, swiveling angle max.: +/- 75° The minimum workpiece length for angled windows depends on the angle and the wood width. Possible part dimensions for studio window (angled) production: Angle Max. working width Min. workpiece length +/-75° 80 mm 800 mm +/-70° 120 mm 490 mm +/-60° 240 mm 360 mm +/-90° 350 mm 185 mm For angles greater than 60°, only counter-processing Commissioning not documented 1) NC angle adjustment automatic for processing angled parts Splinter guard by follow-up counter along the entire spindle length of the tenoning and slotting spindle for 90° machining. Manually adjustable counter wood strip for processing angled parts 2) Additional counter wood pieces

Būklė: naujas, Gamybos metai: 2026, The side brush for the ZP7500 CORMAK sweeper is a practical accessory that significantly enhances the machine’s cleaning efficiency. It is responsible for thoroughly sweeping hard-to-reach areas—along walls, racks, curbs, or in corners—where the main brush cannot reach. As a result, the surface is cleaner after just one pass, eliminating the need for repeated cleaning. Using the side brush also increases the sweeper’s working width, directly resulting in higher productivity. In practical terms, this means faster cleaning of larger warehouse areas, yards, or parking lots. The robust construction and wear-resistant bristles ensure long service life, even under intensive use. The brush is designed for demanding environments—efficiently collecting both fine dust and larger debris such as sand, leaves, or gravel. The brush’s construction is adapted for industrial applications—resistant to mechanical damage and heavy-duty operation. Installation and removal are quick and intuitive, making replacement or servicing easy and minimizing downtime. Key benefits: Laedpfxeyvp Ngo Am Rog - Precise sweeping along edges and in corners - Increased working width and higher productivity - Effective collection of fine and coarse debris - Reduced manual work and fewer passes required - Durable, wear-resistant bristles - Fast installation and convenient operation

Būklė: naujas, Gamybos metai: 2026, The CORMAK WS20 bench drill is a professional pillar drill designed for metalworking, developed for drilling and tapping in industrial environments. Thanks to its robust construction, large spindle travel, and automatic tapping function, the machine delivers excellent performance and precision when machining metals, especially structural steel. Key features of the machine: - Automatic tapping function with left-hand reverse – fast and safe threading up to M16 in steel. - High structural rigidity – the 85 mm diameter column and seasoned cast-iron headstock, base, and table ensure stability and vibration damping. - 135 mm spindle stroke – enables deep drilling without the need to reposition the workpiece. - Belt drive – five precisely matched spindle speeds ranging from 280 to 1875 rpm. - Guards with limit switches – CE compliant, increased operator safety. - Large worktable with 360° rotation and T-slots – flexibility in clamping workpieces. Construction and technology: The CORMAK WS20 bench drill for metal features a design based on high-grade materials. The spindle and gearbox shafts are made from hardened steel for wear resistance. The headstock, column, and table are manufactured from precisely machined, seasoned castings, ensuring the rigidity of the entire assembly. The Morse taper MK2 allows fast tool changes and the use of various working tools. Precision and work efficiency: Thanks to the rigid column, large spindle travel, and refined transmission, the machine enables precise and repeatable hole making and threading. The clear control panel facilitates operation, and the powerful 1.1 kW motor allows efficient work even in hard-to-machine materials. Lodpfx Aorif Trjm Roag Application: The CORMAK WS20 pillar drill is ideally suited for use in: - industrial plants, - mechanical workshops, - maintenance departments, - technical schools and training centers. This machine is intended for drilling and tapping steel, aluminium, and non-ferrous materials. Standard equipment: - Keyed drill chuck - Morse taper drift - U-type spindle guard with safety interlock - Belt drive guard with limit switch Technical specifications: Parameter Value Maximum drilling diameter (steel): 20 mm Maximum tapping diameter (steel): M16 Spindle stroke: 135 mm Spindle taper: MK2 Speed range: 280–1875 rpm Number of speeds: 5 Column diameter: 85 mm Column wall thickness: 12.7 mm Spindle-to-column distance: 260 mm Spindle-to-table distance: 366 mm Spindle-to-base distance: 678 mm Table dimensions: 300 × 320 mm Base dimensions: 376 × 566 mm Motor power: 1.1 kW Supply voltage: 400 V Net weight: 179 kg Machine dimensions: 800 × 450 × 1250 mm

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Keyence VHX 700F Measuring Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 million pixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable between 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (W), approximately 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 sec to 17 sec, adjustable in 0.1 sec steps White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required LCD Monitor: Color LCD (TFT), 17-inch *1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typ.)*1 Contrast ratio: 450:1 (typ.)*1 Viewing angle: ±80° (typ., horizontal), ±70° (typ., vertical)*1 Hard drive Laodpfx Aew Ah Axem Reg 500 GB (incl. 80 GB reserve storage) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: 12 V, 100 W halogen lamp Video output: Output format DVI-I 1920 x 1200 pixels Output scan frequency #8378

Būklė: geras (naudotas), Hydraulic tailstock from a HEYLIGENSTAEDT CNC slant-bed lathe Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Lasdjv R U Urepfx Am Rsg DE - 44143 Dortmund - Wambel

Būklė: naujas, Gamybos metai: 2026, The CORMAK PT410S Thickness and Surface Planer with spiral cutterhead is a professional industrial-grade woodworking machine, combining the functions of a jointer and thickness planer in one compact unit. Equipped with a modern spiral cutterhead, it delivers maximum machining precision, outstanding surface finish, and quiet operation. It is an excellent choice for carpentry shops, furniture manufacturing, and workshops valuing efficiency, accuracy, and reliability. Main advantages of the CORMAK PT410S Thickness and Surface Planer: - Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for perfect wood surface finish, even with challenging wood types. - Quick function change – seamless transition from planer to thickness mode thanks to separately opening tables and dust extraction cover. - Robust construction – heavy cast iron frame and tables provide stiffness and reduced vibrations during operation. - Precise adjustment – clear measurement scale and precision adjustment mechanism for planing depth and fence angle. - High efficiency – up to 4.0 kW (S6 duty) motor ensures smooth and effective machining even for wide workpieces. Design and technology: The CORMAK PT410QS is engineered for years of intensive use. Its cast iron jointer tables assure excellent flatness and stability for the workpiece, while the centrally mounted thickness table guarantees uniform lifting. The oscillating aluminum fence with precise scale allows for setting angles from 90° to 45° for optimal material guidance. Precision and performance: Thanks to its 95 mm diameter spiral cutterhead spinning at 4300 rpm, the thickness planer delivers even, smooth surfaces—even on hard or resinous wood. Feed runs smoothly, with no vibrations or risk of fiber tear-out. Planing height adjustment up to 220 mm enables processing of large components, both solid wood and laminated panels. Applications: Ledpfx Amjyy Nl Nj Rjag The CORMAK PT410S Planer-Thicknesser is perfectly suited for: - carpentry and furniture shops - artisan workshops - stair and wood component production - processing of solid wood and laminated panels This is a machine intended for demanding users seeking precise and trouble-free jointer-thicknessers. Standard equipment: - Cast iron surfacer tables - Spiral cutterhead - Cutterhead guard - Chip extraction outlet - Feed switch - Emergency stop Optional equipment: - Transport trolley - Knife setting device - Mortising/drilling attachment Technical specifications: - Planer table size: 1680 x 410 mm - Thickness table size: 750 x 410 mm - Cutting head diameter: 95 mm - Spindle speed: 4300 rpm - Fence tilt angle: 90–45° - Chip extraction outlet: 100 mm - Maximum thicknessing height: 220 mm - Motor power: 4.0 kW / 400V - Maximum workpiece width: 410 mm - Dimensions: 1680 x 1100 x 1100 mm - Weight: 360 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK SP150 Polisher – Industrial Disc Polisher for Deburring and Surface Finishing Laodpfx Aoyb Etwsm Rsg The CORMAK SP150 satin finishing machine is a highly efficient disc polisher designed for professional surface finishing, deburring, satin finishing, and high-gloss polishing. It is an ideal solution for manufacturing facilities, metal workshops, tool shops, and metalworking plants where durability, precision, and reliability are paramount. The robust construction of the machine features a modern cast iron housing manufactured in accordance with current industrial standards and a rotor equipped with NSK brand bearings, ensuring exceptionally quiet and smooth operation. Thanks to a tapered spindle thread, you can quickly and securely mount various types of polishing discs – from soft to hard, depending on the finishing process. This industrial polisher is fitted with a 0.5 kW motor, providing ample power reserve and dependable operation, even in demanding production environments. The technical solutions applied make the SP150 an extremely versatile tool – functioning both as a satin finishing machine for surface dulling and satin finishing, and as a polisher for achieving a high-gloss finish. If you are looking for a durable, versatile device, CORMAK satin finishing machines are a choice that will meet the expectations of even the most demanding professionals. Key Features: - Industrial-grade disc polisher - Satin finishing machine for dulling, deburring, and finishing surfaces - NSK bearings – reliability, quiet operation, and long service life - High-quality cast iron body – structural durability and rigidity - Powerful 0.5 kW motor – professional performance Technical Specifications – SP150 Satin Finishing Machine Disc diameter: 150 mm Disc thickness: 26 mm Disc bore: 16 mm Rotational speed (max): 2850 rpm Motor power: 0.5 kW Voltage: 230 V Dimensions: 470 x 200 x 280 mm Weight: 13.8 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK SP350 Polishing Machine with Stand – Industrial Disc Polisher for Deburring and Surface Finishing The CORMAK SP350 satin finishing machine is a highly efficient disc polisher designed for professional surface finishing, deburring, mattifying, and high-gloss polishing. It is the ideal solution for production plants, metalworking shops, tooling workshops, and metalworking facilities where durability, precision, and reliability are paramount. The machine features a robust design, utilizing a modern cast housing compliant with current industrial standards and a rotor equipped with high-quality NSK bearings, ensuring exceptionally quiet and smooth operation. The tapered spindle thread allows for quick and stable mounting of various polishing discs – from soft to hard – depending on the processing requirements. This industrial polisher is equipped with a powerful 2.2 kW (S1) and 3.0 kW (S6) motor, providing substantial power reserves and reliable performance even under demanding production conditions. The technical solutions implemented make the SP350 model an extremely versatile tool, suitable both as a satin finishing machine for dulling and satinizing surfaces and as a polisher for achieving a high-gloss finish. If you are looking for a robust and versatile device, the CORMAK satin finishing machines are the choice that will meet the expectations of even the most demanding professionals. Key Features: - Disc polisher for industrial applications - Satin finishing machine for mattifying, deburring, and surface finishing - NSK bearings – reliability, quiet operation, and longevity - High-quality cast housing – durable and rigid construction - Tapered spindle thread – enables installation of various polishing wheels - Powerful 2.2 / 3.0 kW motor – performance for professionals - Stable base – safe and convenient operation Technical Specifications of the SP350 Satin Finishing Machine Laedpfjyb Ibqjx Am Reg Polishing disc diameter: 350 mm Polishing disc thickness: 40 mm Polishing disc bore: 16 mm Max. rotational speed: 1450 rpm Motor power (S1): 2.2 kW Motor power (S6): 3.0 kW Voltage: 400 V Dimensions: 970 x 400 x 1180 mm Weight: 54 kg

Būklė: naujas, Gamybos metai: 2026, CORMAK SP250 Polishing Machine – Industrial Disc Polisher for Deburring and Surface Finishing The CORMAK SP250 satin finishing machine is a highly efficient disc polisher designed for professional surface finishing, deburring, satin finishing, and high-gloss polishing. It is the ideal solution for manufacturing plants, metalworking shops, tool workshops, and metal processing facilities where durability, precision, and reliability are essential. The machine’s robust construction is based on a modern cast housing manufactured to current industrial standards and a rotor equipped with NSK-brand bearings, ensuring exceptionally quiet and smooth operation. Thanks to the tapered spindle thread, a wide range of polishing discs—from soft to hard—can be fitted quickly and securely, depending on the processing requirements. This industrial polisher features a 0.9 kW motor that provides a high power reserve and reliable performance even under demanding production conditions. Its technical solutions make the SP250 an extremely versatile tool—suitable both as a satin finishing machine for dulling and satinizing surfaces, and as a polisher for achieving high-gloss finishes. If you are looking for a sturdy, versatile device, CORMAK satin finishing machines are the choice that will meet even the highest expectations of demanding professionals. Key features of the machine: - Industrial-grade disc polisher Lajdpfjyb Hu Ajx Am Reg - Satin finishing machine for dulling, deburring, and surface finishing - NSK bearings – reliability, quiet operation, and long service life - High-quality cast body – durability and structural rigidity - Powerful 0.9 kW motor – performance for professionals Technical Specifications of the SP250 Satin Finishing Machine: - Polishing disc diameter: 250 mm - Polishing disc thickness: 26 mm - Polishing disc bore: 16 mm - Maximum rotational speed: 2850 rpm - Motor power: 0.9 kW - Voltage: 400 V - Dimensions: 570 x 300 x 380 mm - Weight: 22.2 kg

Būklė: naujas, Gamybos metai: 2026, The 200L blast cabinet is a high-performance, professional device designed for precise cleaning and preparation of metal surfaces and other hard materials. Thanks to its gun with an air valve integrated into the handle, the operator has precise control over the abrasive blast stream, allowing safe and effective work on both delicate parts and durable structures. The blast cabinet is engineered for heavy-duty use in industrial and workshop environments. Key machine advantages: - Adjustable blasting gun – allows direct regulation of abrasive pressure at the handle for maximum process control. - Ergonomic working area – illuminated cabinet enables comfortable and safe operation even during extended work cycles. Ljdpjy E Hnfofx Am Reag - Robust steel construction – resistant to mechanical damage and corrosion, designed for demanding workshop tasks. - Air efficiency – air requirement of 400–700 l/min allows for effective sandblasting across a broad range of components. - Versatile use – ideal abrasive blast cabinet for wheels, automotive, and industrial parts. Construction and technology: The 200-litre blast cabinet features a spacious blast chamber measuring 760x510x470 mm, allowing convenient treatment of large components. The rigid steel frame and sealed work area ensure operator safety and minimize dust emission into the environment. The 63 mm ø flange extraction port enables connection to an external dust extractor or cyclone separator, significantly improving visibility and cleanliness in the workspace. Precision and work efficiency: Adjustable blasting pressure and the ergonomic gun enable precise adaptation to various material types and accuracy requirements. This makes the machine suitable for gentle cleaning of light alloys as well as intensive removal of paint coatings, rust, and industrial contaminants. Compressed air flow of 400–700 l/min ensures continuous, reliable operation without compromising quality. Applications: The 200L blast cabinet is intended for professional use, including: - Automotive and motorcycle workshops - Industrial facilities and tool shops - Metal restoration companies - Custom manufacturing and technical service operations - Paint shops and electroplating plants An ideal blasting unit for metalwork, this device excels wherever meticulous surface preparation is required for subsequent processes such as painting, galvanizing, welding, or bonding. Standard equipment: - Blasting gun with pressure valve in the handle - Integrated cabinet lighting - Heavy-duty gloves fixed inside the chamber - Transparent inspection window Technical data: AIR REQUIREMENT: 400–700 L/min WORKING CAPACITY: 200L POWER SUPPLY: 230V WEIGHT: 46kg CABINET DIMENSIONS: 760x510x470 mm HEIGHT WITH STAND: 1410 mm EXTRACTION FLANGE DIAMETER: ø 63 mm Additional information: Device requires self-assembly.

Būklė: naudotas, Gamybos metai: 2007, Naudotas įrenginys Pagaminimo metai: 2007 Įranga ir techniniai duomenys Pjovimo ilgis: 5300 mm Pjovimo aukštis: 2200 mm (atplėšimo aukštis 2110 mm) Pjovimo gylis: maks. 60 mm Ištraukimas: - Pjūklo agregatas 120 mm - Rėmo galas 100 mm Rušinio atrama: - Stabili plastikinė atrama užtikrina optimalų stabilumą net siauriems ruošiniams. - Drožlės pašalinamos įstrižai einančių plyšių pagalba. Ritinėlių transportavimo sistema: Rankinė, lengvam ir ruošinio nepažeidžiančiam transportavimui Fiksacija: Rankinė, vertikali ir horizontali Pajėgumo pasiūla: Rankinė, vertikali ir horizontali Diskinis pjūklas: HM, 250 mm, tuščiaviduriai-stogo dantys, Z48 Laedpozk N S Isfx Am Reg Pjūklo variklis: 4 kW prie 5450 aps./min, 400 V, 50 Hz Atlenkiama liniuotė: įskaitant ruošinio atramą siauroms detalėms (5 laukai) Su juostiniu atmušu Su Supercut įpjovimo įrenginiu Ištraukimo įrenginys pagal BG-taisykles TRK (mažiau kaip 2 mg smulkios dulkių / m³ oro) Prieinamumas: greitas pristatymas Sandėlio vieta: 63934 Röllbach

Būklė: naudotas, Gamybos metai: 1997, - Manufacturer: Cefla / Sorbini - Model: T / 20-SP-1 - Year of manufacture: 1997 - Working width: 1300 mm - Working height: 880 - 940 mm - Workpiece height: approx. 3 - 80 mm - Operating side: right - Filler application cylinder: approx. 250 mm - Metering roller, hard chrome plated: 174 mm - Smoothing roller, hard chrome plated: 245 mm - Reversible drive - Belt conveyor - Belt control - Length: approx. 1640 mm - Width: 2590 mm - Height: approx. 1700 mm - Feed speed: 6 - 24 m/min - Total connected load: 4.5 kW Lodpfozf N E Rjx Am Reag - Weight: 2,000 kg - With control cabinet - Voltage, frequency: 400 V / 50 Hz - Location: not in stock

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: Lodpsxwaz Hefx Am Roag - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K

Būklė: beveik kaip naujas (naudotas), „Hardy“ Lsdpfxezv Rrms Am Rsag Tipas: „Hardy TH453-W2E-II“ Nenaudota (ekspozicinis modelis) Vandeniu aušinama Siūlome naudotą „Hardy“ dviejų kamerų klimatinę kamerą, skirtą temperatūros ir drėgmės bandymams. Įrenginyje yra dvi bandymo kameros, esančios viename bendrame korpuse. Abi bandymo kameros gali būti valdomos nepriklausomai viena nuo kitos. Dėl to galima atlikti du skirtingus bandymus vienu metu. Klimatinė kamera yra paruošta bandymams su ličio jonų baterijomis ir ypač tinka akumuliatoriams, naudojamiems elektriniuose įrankiuose, elektriniuose dviračiuose ir panašiose srityse. Techniniai duomenys: Bandymo kamerų skaičius: 2 Bandymo kamerų veikimas: nepriklausomai viena nuo kitos Bandymo kameros tūris: apie 300 litrų kiekvienai kamerai Bandymo kameros matmenys: 850 × 600 × 600 mm, plotis × gylis × aukštis Išoriniai matmenys: 1150 × 2115 × 1922 mm, plotis × gylis × aukštis Temperatūros diapazonas: -45 °C iki +100 °C Temperatūros nuokrypis: ± 0,5 °C Temperatūros pokytis, pagal techninę specifikaciją: Šildymo greitis ≥ 2 °C nuo +25 °C iki +100 °C, tuščia ir nelinearinis Aušinimo greitis ≥ 2 °C nuo +25 °C iki -45 °C, tuščia ir nelinearinis Drėgmės diapazonas: 20 % RH iki 98 % RH Temperatūros diapazonas drėgmės režimu: +20 °C iki +85 °C Būklė: Nauja Komplektacija: (Žr. paveikslėlį) (Pasiliekame teisę atlikti pakeitimus ir klaidų taisymus techniniuose duomenyse!) Jei turite daugiau klausimų, mielai atsakysime jums telefonu.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, This listing is for informational purposes only and does not constitute a legally binding offer. YAMA S15 HAPPY – Compact Crawler Excavator for Professional Use The modern YAMA S15 HAPPY mini excavator has been designed to meet the highest standards. It is the perfect choice for professional users in construction, electrical and plumbing installation, renovation companies, and service providers in related industries. This model is equipped with a swing boom, making it much easier to operate in confined spaces – ideal for precise work in hard-to-reach areas. The mini excavators are manufactured under supervision and to the standards of European technicians. The sturdy construction and high-quality components ensure reliable operation even under demanding conditions. TECHNICAL DATA: Operating weight: 1,500 kg Bucket capacity (standard): 0.03 m³ Engine: Laidong, 3-cylinder diesel Engine power: 18.4 kW / 25 HP Cooler: Oil cooler included Fuel tank: 15 liters Max. climbing ability: 35° Hydraulic system: Gear pump Hydraulic pressure: 16 MPa Hydraulic flow: 25 l/min Travel speed: up to 2 km/h Platform swing speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa DIMENSIONS: Overall length: 2,550 mm Ljdpfxsyk Txgj Am Rsag Overall width: 1,100 mm Overall height: 2,170 mm Ground clearance: 380 mm Track width: 230 mm Track gauge: 920 mm Total track length: 1,300 mm Bucket width (standard): 380 mm Dozer blade: – Width: 1,160 mm – Height: 210 mm – Max. lift height: 325 mm – Max. lower depth: 175 mm WORKING RANGES: Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. digging reach: 2,400 mm Digging reach at ground level: 3,227 mm Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Minimum swing radius: 1,550 mm PRICE: net €10,400 gross €12,376