Amtec Hffs Z50-M Fsp pirkti naudotą (75 824)

Būklė: naujas, Gamybos metai: 2025, Horizontal packaging machine, MINI VERSION, for pre-made Doypacks, block-bottom bags, or flat pouches, available as a duplex version for higher output. Modules for specific pouch features such as zip/press closures, screw caps (spouts), or gusset shaping can be integrated. Options: batch/date printer, gas flushing module. Pouch detectors verify correct placement and complete opening of the Doypack. As soon as the pouch is detected, the product is dispensed into the bag via the filling spout. The sealing area is kept clean throughout the process. A special gripping system holds the stand-up pouch precisely in position during filling, before the Doypack is closed and sealed. Features: MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC cylinders. - Specifications: stainless steel housing (SS304); max. machine cycle rate idle: 25 cycles/min; bag width: 100–300 mm; bag length: 100–350 mm; required compressed air: 6.5 bar, 0.4 m³/min; power: 220V, single phase, 2 kW. Please note that our new machine prices are often below typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. - Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines we also offer very short delivery times starting at approximately 3 weeks. - All machines come with a full warranty. Iedev Nllxepfx Aaujtf

Būklė: naujas, Gamybos metai: 2025, L-bar shrink wrapping machine for shrink film packaging, PRO version with reinforced sealing frame for consistently accurate packaging results. Designed for medium-sized products, semi-automatic operation (manual product feed, automatic outfeed). Suitable for use in combination with the PRO version of the AMTEC SHRINKtunnel POF-L. - Specifications: 220V, 4kW; no compressed air required; maximum machine cycle speed in idle mode: 20 cycles/minute; max. product dimensions (mm): L(100-500)xW(100-400)xH(2-280); max. product weight: dependent on product dimensions and weight distribution on the feed table; machine dimensions (mm): L1765xW810xH975; weight (net/gross) 150-200kg. For heavy products, we are happy to produce sample packaging for you to either confirm that the machine can handle your products or, if necessary, to offer you alternative equipment for your packaging requirements. For semi-automatic machines, the cycle speed should also be viewed as an operator-dependent empirical value. Please note that our new machine prices often undercut typical used equipment prices. Feel free to send us an inquiry and let us know about your packaging application. - We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. - All machines are supplied with a full warranty. Itjdpfxjv Nlzye Aauef

Būklė: naujas, Gamybos metai: 2025, Automatic Packaging Machine: Controlled by OMRON PLC, equipped with 2 filling systems featuring volumetric cup dosing and 1 filling system with an auger doser. Suitable for packaging granulates (2x) and powder (1x). Standard functions include dosing, bag forming, packaging, and sealing. Consistent positioning via servo-driven film transport system; uniform film conveyance through two synchronously running belts; high degree of automation with automatic correction function. Robust construction, easy adjustment and maintenance. - Specifications: max. machine cycle rate (idle): 60 cycles/minute; bag sizes: L 50-240mm, W 50-200mm; max. film width: 420 mm; film thickness: 0.04-0.09mm; bag types produced: 4-side seal bags; dosing volumes customizable as per customer requirement or depending on bag size; compressed air: 6 bar 2.0m³/min; power/voltage: 2kW/220V, 50Hz, approx. 3-4kW; dimensions (LxWxH): approx. 1600×1600×1700mm; weight: 500kg (depending on equipment); housing: SS304, touchscreen: 7" color; PLC: OMRON; control valve: AIRTAC; servomotor: SCHNEIDER; cylinders and pneumatic components: AIRTAC. - Volumetric cup system: suitable for automatic dosing of small granular and free-flowing powder products such as granulated sugar, seeds, etc. - Specifications: max. machine cycle rate (idle): 60 cycles/minute. - Auger system: screw doser for powder products. - Please note: This is only a sample system. Please let us know your exact requirements. The machine/system is also available in various configurations for different packaging sizes and speeds. Please note that our new prices are often below standard used-machine prices. Feel free to send us an inquiry and describe your packaging application. We usually have 30-50 different new machines available immediately from stock. For custom-designed machines, we offer very short lead times from approx. 3 weeks. - All machines are supplied with full warranty. Itedpfov Nmhhox Aaujf

Gamybos metai: 2025, būklė: naujas, Weighing unit with 14 weighing heads (containers), each with a 0.5-liter capacity for extremely precise weighing. - Specifications: Accuracy: +/- 0.3-0.8g; max. machine cycle rate idle: 120 cycles/min; suitable for weights from 15-300g; stainless steel; 220V/1.5kW; dimensions and weight: L1236xW936xH1113mm, 500/600kg. The machine/system is also available in additional versions for different packaging sizes and packaging speeds. Iedpfx Aev Nmn Ueaujtf Please note that our new prices are often below the usual used equipment prices. Feel free to contact us and let us know your packaging requirements. – Typically, we have 30-50 different new machines available from stock at any given time. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Weighing unit with 10 weighing heads (springless hoppers), each with a 4.0-liter volume for extremely precise weighing. Specially designed for wet environments and/or products (protection class IP67), where frequent machine cleaning is required (e.g., salads, pet food, frozen products up to 150mm, non-food items, etc.). Specifications: max. idle machine cycle rate: 50 cycles/min; weight range: 10–3,000 g; accuracy: +/-0.5–2.0 g; touchscreen control (large version); stainless steel; 220V/2.0kW; dimensions and weight: L1906 x W1266 x H1603 mm, 700/750 kg. The machine/system is also available in other versions for different packaging sizes and packaging speeds. Itsdpfxjv Nmrmo Aauof Please note that our new prices are often below the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. Typically, 30–50 different new machines are available directly from stock. For customer-specific machine builds, we offer very short delivery times starting from approx. 3 weeks. All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, 4-lane VFFS for packaging granulates, powders, or liquids into pillow bags with back seal, optionally also for 3- and 4-side seal bags (surcharge applies). Servo motors for fast film feed. Suitable for all sealable mono- and composite films as well as laminated films. Additional features include: touchscreen operator panel, automatic program setup, registration mark sensor, date/batch coder. - Specifications: max. machine cycle rate (idle): 4x60 cycles/min (equals max. 240 bags/min); bag sizes: L(50-250)xW(55-102)mm; film width: 520-900mm; electrical supply: 380V, 6.3kW; compressed air: 1.4m³/min, 6bar; machine dimensions: L1800xW1600xH1760mm. Ijdpfxjv Nmx To Aauotf Please note that our new machine prices are often below typical used equipment prices. Feel free to contact us and provide details about your packaging task. - We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at approximately 3 weeks. - All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Welding module for integration downstream of the large FILLING machines. Seals large PE bags with a weld seam. Includes a 700 mm conveyor belt. Please note that our new prices are often lower than typical prices for used equipment. Feel free to contact us with your specific packaging requirements. We generally have 30-50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short lead times starting from approximately 3 weeks. - All machines come with a full warranty. Isdpfx Aaev Nm Etjustf

Būklė: naujas, Gamybos metai: 2025, Very compact and highly sensitive metal detector with flexible detector head mounting, suitable for small products and specialty items. - Specifications: Detection speed: 0.17–1 m/sec; Detection accuracy: FE from Ø 0.6 mm, SUS from Ø 1.8 mm; Tunnel size (W x H): 150 x 100 mm; Maximum product size (W x H): 110 x 60 mm; Maximum product weight: 1 kg; Power supply: 220V/0.15kW, 50Hz/60Hz; Stainless steel frame; Dimensions and weight: L 940 x W 500 x H 1198 mm, 100/200 kg. Please note that our new prices are often below standard used equipment prices. Feel free to contact us and let us know about your packaging requirements. – Usually, 30–50 different new machines are available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting at approximately 3 weeks. – All machines are available with a full warranty. Iodpfjv Nm E Hex Aaujtf

Būklė: naujas, Gamybos metai: 2025, High-speed metal detector designed for use in high-speed production lines, stainless steel frame, touchscreen control panel. - Specifications: Detection speed: 0.2–1.7 m/sec; detection sensitivity: FE from Ø 0.8 mm, SUS from Ø 1.8 mm; tunnel dimensions (W x H): 300 x 120 mm; max. product size (W x H): 250 x 80 mm; power supply: 220 V/0.3 kW, 50 Hz/60 Hz; dimensions and weight: L 1,505 x W 600 x H 890 mm, 150/250 kg. Iedpfjv Nm Hdjx Aaujtf Please note that our new prices are often lower than typical used equipment prices. Feel free to enquire and let us know your packaging requirements. - We usually have 30–50 different new machines immediately available from stock. For custom-manufactured machines, we offer very short delivery times from approx. 3 weeks. - All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without platform frame. Suitable for producing pillow bags with back seam, gusset stand-up pouches (gusset tool required) OR pyramid-shaped bags (special sealing unit required). The vertical packaging machine is equipped with: touchscreen; PLC; photoelectric sensor (print mark detection) for sealing/cutting position; servo-driven end-sealing unit; servo motor for film pull-off; thermal transfer printer for batch number, date, best-before date (BBD). Itsdpfjv Nm Uzox Aaujf - Multihead weigher specifications: Number of weighing heads: 14; Weighing range (single discharge): 10–1500g; Volume per head: 2.5L; Weighing accuracy: X(0.5); Discharge chute: double flap; Surface finish: smooth (optionally dimpled); product-contact parts made from: AISI 304 (optional AISI 316 at extra cost). - VFFS machine specifications: Max. machine cycle rate (no load): 80 cycles/min; Bag size: L(40–300)xW(60–220)mm (double film draw for longer bags possible); Suitable film width: 140–460mm; Product-contact parts made from: AISI 304 (optional AISI 316 at extra cost); Power supply: 220V, 50/60Hz; Power consumption: 4.9kW; Required compressed air: 0.4–0.8MPa; Air consumption: 0.2m³/min; Dimensions (LxWxH): 1780*1260*2530mm; Weight: 890kg.

Gamybos metai: 2025, būklė: naujas, VFFS machine with 14-head multihead weigher for bulk materials and granulates. Compact design without a platform frame. Suitable for producing pillow bags with back seam, gusseted stand-up pouches (gusset tool required), OR pyramid-shaped bags (special sealing unit required). The vertical packaging machine is equipped with: touchscreen; PLC; photo sensor (print mark detection) for sealing/cutting position; servo-driven end-sealing unit; servo motor for film pulling; thermal transfer printer for batch number, date, expiration date. - Multihead weigher specifications: Number of weighing heads: 14 heads; weighing range (per discharge): 10-1500g; volume per weighing head: 1.6L; weighing accuracy: X(0.5); discharge gate: single flap; surface finish: smooth (optionally dimpled surface); product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost). Itodpfxev Nnafj Aaujf - VFFS machine specifications: max. machine cycle rate at idle: 80 cycles/minute; bag size: L(40-300)xW(70-270)mm (double film pulling for longer bags possible); suitable film width: 160-560mm; product-contact parts made of: AISI 304 (optionally AISI 316 at extra cost); power supply: 220V, 50/60Hz; power consumption: 5.5kW; required compressed air: 0.4-0.8MPa; air consumption: 0.2m³/min; dimensions (LxWxH): 2266*1416*2538mm; weight: 940kg.

Būklė: naujas, Gamybos metai: 2025, Vertical form-fill-seal (VFFS) packaging machine for producing pillow bags with back-seal and gusseted stand-up pouches (gusset tool required). Equipped with: quick-change forming set; SIEMENS PLC; WEINVIEW touchscreen; photo sensor (registration mark detection) for sealing/cutting position; pneumatic sealing unit for end-sealing; servo motor for film draw-off; thermal transfer printer for batch number, date, and best-before date (BBD). - Specifications for the VFFS machine: • Max. machine cycle rate (idle): 15 cycles/minute • Bag size: L(60–600) x W(200–585)mm (dual film draw-off L = 1100mm), gusseted stand-up pouch: L(60–600) x W(140–500) x D(100–250)mm (dual film draw-off L = 1100mm) • Suitable film width: 420–1200mm • Product-contact parts: AISI 304 stainless steel (AISI 316 optional at extra charge) • Power supply: 220V, 50/60Hz • Power consumption: 8.2kW • Required compressed air: 0.7MPa Iodpfxsv Nnfhe Aauotf • Air consumption: 0.25–0.50m³/min • Weight: 1030kg Please note that our new machine prices are often below typical used equipment prices. Please feel free to contact us and tell us your packaging requirements. We generally have 30–50 different new machines in stock for immediate delivery. For custom-built machines, we offer very short lead times from approx. 3 weeks. All machines come with a full warranty.

Gamybos metai: 2025, būklė: naujas, Vertical packaging machine with auger dosing unit for powders. Equipped with a punch tool for rounded corner sealing (cross-sealing). The following bag types can be configured: pillow bags with back seal, 3-side seal bags, or 4-side seal bags (surcharge applies). PLC-controlled, operation via touchscreen, pneumatically driven cross-sealing. - Specifications: Bag size – pillow bag with back seal: L(40-160)xW(20-100)mm, 3- or 4-side seal bag: L(40-160)xW(20-100)mm; suitable film width: 240mm; suitable film material: composite film, heat-sealable; dosing range: 1-50g; max. machine cycle rate (idle): 60 cycles/minute; power supply: 220V, 50Hz; power consumption: 2kW; required compressed air: max. 0.8MPa; compressed air consumption: 2m³/h; dimensions: L800xW960xH2050mm; weight: 300kg. Please note that our new prices are often below the usual prices for used machines. Simply send us your inquiry and describe your packaging requirement. – We typically have 30-50 different new machines available from stock for immediate delivery. For machines manufactured according to customer specifications, we offer very short delivery times starting at around 3 weeks. – All machines come with a full warranty. Ijdpfx Aaev Nnigouotf

Būklė: naujas, Gamybos metai: 2025, Vertical packaging machine with piston pump for dosing liquids. Specifically designed for custom-made pouches with regular or irregular shapes, such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific pouch layout. PLC controlled, operation via touchscreen. Itsdpfx Aasv Nni Hsuef - Specifications: Pouch size: L(40-170)xW(20-110)mm; suitable film width: 220mm; suitable film material: composite film, heat-sealable; dosing range: 1-30ml; max. machine cycle rate (idle): 50 cycles/minute; power supply: 220V, 50Hz; power consumption: 2.8kW; required compressed air: max. 0.8MPa; compressed air consumption: 2m³/h; dimensions: L930xW750xH1920mm; weight: 350kg. Please note that our new prices are often lower than typical used equipment prices. Simply inquire and let us know your packaging requirements. – Generally, 30-50 different new machines are available for immediate delivery from stock. For custom-made machines, we offer very short delivery times starting at around 3 weeks. – All machines come with a full warranty.

Gamybos metai: 2025, būklė: naujas, Volumetric dosing unit for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: Dosing range: 10–500 ml; Hopper volume: 50–60 L; Number of dosing cups: Depending on your product and desired fill quantities, we will select a suitable cup version for you (single-head or multi-head). Please note that our new prices are often lower than the usual used prices. Simply send us an inquiry and let us know your packaging requirements. - We typically have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short lead times starting from around 3 weeks. - All machines are available with a full warranty. Iedjv Nnlhspfx Aaustf

Būklė: naujas, Gamybos metai: 2025, Volumetric dosing unit for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: Dosing range: 500–6000 ml; Hopper capacity: 120 L; Number of dosing cups: We select a suitable cup version (single or multi-head) based on your product and the desired filling volumes. Isdpjv Nnl Isfx Aauotf Please note that our new prices are often below common used equipment prices. Please feel free to inquire and let us know your packaging requirements. - Typically, 30–50 different new machines are immediately available from stock. Furthermore, for machines manufactured to customer specifications, we offer very short lead times starting at approx. 3 weeks. - All machines are available with full warranty.

Būklė: naujas, Gamybos metai: 2025, Screw dosing unit for powders. Dosing via rotating screw auger. - Specifications: Filling range: 5-1000g; Hopper capacity: 30 litres; Hopper with side opening; Stainless steel 304 construction; Power supply: 220~415V; Power consumption: 1.4kW. Please note that our new prices are often below typical used equipment prices. Feel free to contact us and let us know your packaging requirements. - We typically have 30-50 different new machines available from stock at any given time. For machines manufactured to customer specifications, we offer very short delivery times starting from approximately 3 weeks. - All machines are available with a full warranty. Itsdpjv Nnmlefx Aaujf

Būklė: naujas, Gamybos metai: 2025, Screw dosing unit for powders. Dosing via rotating screw conveyor. - Specifications: filling range: 10–5000g; fill hopper capacity: 50 liters; hopper with side opening; made of stainless steel 304; power supply: 220~415V; power consumption: 2.25 kW. Ijdpfxev Nnmxo Aaustf Please note that our new prices are often lower than the usual prices for used machines. Feel free to contact us and tell us about your packaging application. – We generally have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approx. 3 weeks. – All machines are offered with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Rotary filling and sealing machine for pre-made pouches with 6 processing stations. Suitable for flat pouches and doypacks. Easy operation via touchscreen and SIEMENS PLC, frequency converter for speed control, no-bag (or no open bag) no-fill/seal function. Motorized adjustment of pouch width, maintenance-free plastic bearings. All parts in contact with product or pouch are made from stainless steel (SS304). Can be combined with all types of feeding and dosing modules (optional) for packaging granular products, liquids, pastes, powders, etc. Suitable for a wide range of films, such as composite and single-layer PE and PP films, paper, etc. (details upon request). Vertical pouch feeding via hopper (for flat pouches, optional: horizontal feeding). Vacuum unit for opening pouches made of thinner film material. Compatible with the following pouch sizes: L(100-350)xW(100-210)mm. - Specifications: max. empty machine cycle rate: 45 cycles/minute; power: 380V, 2.5kW; compressed air: 0.6m³, 6bar; machine dimensions: L2214xW1850xH1640mm; weight: 1000kg. The machine/system is also available in other versions for various packaging sizes and speeds. Please note that our new prices are frequently lower than typical used equipment prices. Please feel free to contact us with your packaging requirements. – Usually, 30-50 different new machines are immediately available from stock. For custom-built machines, we offer very short delivery times from approximately 3 weeks. – All machines come with a full warranty. Itsdjv Nlmcjpfx Aaujf

Gamybos metai: 2025, būklė: naujas, Industrial mixer for dry powders, moist or pasty, sticky products. The single-shaft spiral mixer enables uniform mixing of products within a few minutes. - Specifications: Agitator type: single-shaft spiral agitator; capacity: max. 120 liters; maximum idle speed: 53 rpm; machine dimensions: L2030 x W630 x H980 mm; weight: 450 kg. Itodpfx Aasv Nlyvsusf Please note that our new prices are frequently below the typical used equipment prices. Feel free to inquire and tell us about your packaging task. - Normally, we always have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from approximately 3 weeks. - All machines are available with a full warranty.

Gamybos metai: 2025, būklė: naujas, Industrial mixer for dry, moist, or pasty products, specifically designed for materials with high specific gravity. The single-shaft spiral mixer enables uniform blending of products into a homogeneous mass within minutes. Isdpfxjv Nly Ae Aaustf - Specifications: Agitator type: single-shaft spiral mixer; Capacity: max. 9,000 liters; maximum idle speed: 20 rpm; power: 90 kW; machine dimensions: L6500 x W2100 x H2800 mm; weight: 9,800 kg. The machine/system is also available in additional configurations for different packaging sizes and packaging speeds. Please note that our new prices are often below the usual prices for used equipment. Feel free to inquire and let us know your packaging requirements. – We generally have 30-50 different new machines available for immediate delivery from stock. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines come with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Angular welding machine for shrink film packaging, PRO version with reinforced welding frame for consistently accurate packaging results. Designed for larger products, semi-automatic operation (manual product feeding, automatic discharge). Suitable for use in combination with the PRO version of the AMTEC SHRINKtunnel POF-XXL. – Specifications: 220V, 7kW; no compressed air required; max. machine cycle rate (idle): 20 cycles/minute; max. product dimensions (mm): L(100-850)xW(100-650)xH(2-280); max. product weight: dependent on product size and weight distribution on the infeed table; machine dimensions (mm): L2410xW1095xH1515; weight (net/gross) 200–250 kg. For heavy products, we will gladly produce sample packaging to confirm whether the machine can process your products or, if necessary, to offer suitable alternative systems for your packaging task. For semi-automatic machines, the cycle rate must also be understood as an operator-dependent empirical value. Itjdpev Nlz Hsfx Aauof Please note that our new equipment prices are often lower than the usual used prices. Feel free to inquire and let us know your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short lead times starting from around 3 weeks. – All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Angle welding machine for shrink film packaging of extremely large products, semi-automatic (manual product feed, automatic outfeed) with a hand-operated sealing mechanism for the angle welding unit (no compressed air required). Suitable for use in combination with the AMTEC SHRINKtunnel POF-XTRA (for very large/wide products). Iedpov Nlz Tjfx Aaujtf - Specifications: 220V, 4.0kW; max. idle machine cycle rate: 15 cycles/minute; max. product dimensions (mm): L1150xW870xH350; sealing knife length: L1200xW900mm; max. product weight: depends on product dimensions and weight distribution on the infeed table; machine dimensions: L2840xW1560xH1310mm; weight (net/gross): 350/400kg. For heavy products, we are happy to create sample packaging to confirm whether the machine can handle your products or, if necessary, to recommend alternative equipment for your packaging requirements. For semi-automatic machines, the cycle rate should also be understood as an operator-dependent average value. Please note that our new machine prices are often below the usual used equipment prices. Simply send us your inquiry and let us know your packaging requirements. – Typically, 30–50 different new machines are available from stock for immediate delivery. For custom-built units, we offer very short delivery times starting at around 3 weeks. – All machines are available with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Sample system for counting and packaging small metal products or hardware in flat bags with a back seam. The weighing and counting system combined with a vertical form-fill-seal machine is suitable for small metal items such as nails, screws, nuts, bolts, washers, etc. The iron and metal products are conveyed to the weighing and counting unit via a magnetic conveyor belt and then packaged in flat bags. – Specifications of the weigh-count packaging system: max. machine cycle speed (idle): 8 cycles/minute; bag dimensions: max. L200xW300mm; electrical power: approx. 2kW, 220V; compressed air: 0.2m³/min, 6-8 bar. The system can be expanded for counting and packaging various products into a single bag. The specifications mentioned refer to the exemplary packaging system. Final machine dimensions and total price depend, among other factors, on the required packing speed, the products to be packaged, and the bag size. Itjdpfx Ajv Nmhzeausf Please note that our new machine prices are often lower than typical used equipment prices. Feel free to inquire and let us know about your packaging requirements. – We usually have 30–50 different new machines in stock and available immediately. For custom-built machines, we offer very short delivery times starting from approximately 3 weeks. – All machines are supplied with a full warranty.

Būklė: naujas, Gamybos metai: 2025, Weighing unit with 10 weighing heads (containers), each with a volume of 0.8 liters for extremely precise weighing. - Specifications: Accuracy: +/- 0.3–0.8g; maximum machine cycle in idle mode: 70 cycles/minute; suitable for weights from 15–300g; stainless steel; 220V/1.5kW; dimensions and weight: L1336xW930xH1146mm, 400/500kg. The machine/system is also available in additional versions for various packaging sizes and packaging speeds. Ijdpfxjv Nmn Io Aauetf Please note that our new prices are often below the typical prices for used equipment. Feel free to contact us and let us know your packaging requirements. – From stock, there are usually 30–50 different new machines available immediately. For machines manufactured to customer specifications, we offer very short delivery times from around 3 weeks. – All machines come with a full warranty.