Amada Hfa 700 Cnc pirkti naudotą (14 972)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, perforavimo jėga: 31 t, X ašies eiga: 2 500 mm, Y ašies eiga: 1 525 mm, bendras svoris: 21 000 kg, stalo apkrova: 160 kg, valdiklių gamintojas: FANUC, ašių skaičius: 2, Šios AMADA EMZ 3610 NT CNC štampavimo staklės pagamintos 2011 m. Ji turi "Fanuc" valdymo sistemą, 300 kN perforavimo jėgą ir 2500 x 1525 mm darbinį plotą, kurį galima išplėsti iki 5000 x 1525 mm, keičiant padėtį. Mašina gali apdoroti iki 4,5 mm storio lakštus, o didžiausia stalo apkrova - 160 kg. Jei ieškote aukštos kokybės perforavimo galimybių, apsvarstykite mūsų parduodamą "AMADA EMZ 3610 NT" mašiną. Susisiekite su mumis ir gaukite daugiau informacijos. • Darbinis plotas su perstumdymu: 5000 x 1525 mm • Didžiausias lakšto storis: Didžiausias storis: 4,5 mm (minkštas plienas) • Padavimo greitis X/Y: 100 / 80 m/min (128 m/min vienu metu) • Pozicionavimo paklaida: +/- 0,1 mm • Z-turreto stotys: 45 • Automatinio indekso stotys: 4 (2 x B, 2 x C) • Turreto padavimo greitis: 1/min: 30 1/min • Didžiausias smūgių skaičius: Didžiausias užsakymų skaičius: 1000/min. • Mašinos rėmas: Tilto rėmas • Perforavimo pavara: Servoelektrinė dviguba pavara: Servoelektrinė dviguba pavara • Pavaros (bokštelis + stalas): Kintamosios srovės varikliai • Griebtuvai: Pneumatinis • Elektros jungtis: Pneumatinė: Pneumatinė: Pneumatinė: Pneumatinė: Pneumatinė: 400V / 50Hz • Elektros energijos suvartojimas: Elektros srovė: 1 kW - 7 kW • Oro sąnaudos (mašina): Oro sąnaudos (250 l/min) • Oro sąnaudos (Air Jet Vakuum): (250 l/min) Papildoma įranga • Pakrovimo įrenginys: Krautuvas L III 300 • Minimalus lakšto dydis: 1000 x 300 mm • Didžiausias lakšto dydis: 3000 x 1500 mm • Medžiagos storis: 0,5-8,0 mm • Didžiausias pakrovimo svoris: 300 kg • Didžiausias krautuvo aukštis: 300 mm • Didžiausias padėklo svoris: 4000 kg (2x2000 kg) • Didžiausia padavimo sparta (skersai): 70 m/min. • Siurbtukų skaičius: 34 vnt. • Dvigubo lapo valdymas: Taip, su lapo storio detektoriumi • Oro sąnaudos: 510 l/min, 6 bar įleidimo slėgis • Elektros jungtis: 400V • Iškrovimo įrenginys su dalių šalintuvu: PR 3 UL 300 P Credpfex D Hpqjx Af Aeb • Minimalus / maksimalus dalių dydis: 150 x 150 mm / 2500 x 1000 mm • Lakšto storis: 0,5-3,0 mm (4 mm EM serijoje) • Didžiausias detalės svoris: 50 kg • Sandėliavimo stalo dydis: 3400 x 1400 mm • Didžiausias detalės dydis iškrovimo spaustuvams: 3000 x 1500 mm • Didžiausias krovimo aukštis skeleto stalas: 450 mm. • Didžiausias skeleto stalo svoris: 2000 kg • Didžiausias sandėliavimo stalo aukštis: 450 mm. • Didžiausias svoris sandėliavimo stalas: 4000 kg • Didžiausia padavimo sparta X-/Y kryptimi: 180 / 90 m/min. • Oro sąnaudos: 1000 l/min, 6 barų įleidimo slėgis • Elektros jungtis: 400V

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, 1999 m. pagamintas presinis stabdys. Didžiausia šio AMADA HFB 5020 presavimo jėga yra 500 kN, o didžiausia eiga - 200 mm. Tvirtos 4700 kg sveriančios mašinos svoris užtikrina ilgaamžiškumą ir efektyvumą. Jei ieškote aukštos kokybės presavimo galimybių, apsvarstykite mūsų parduodamas AMADA HFB 5020 stakles. Susisiekite su mumis dėl išsamesnės informacijos. Crjdpfsynadwex Af Aeb • Didžiausia spaudimo jėga: 500 kN • Didžiausia eiga: 200 mm • Mašinos matmenys (DxŠxV):: Nepateikta • Svoris (kg): (kg): 4700 kg • Triukšmo lygis: < 70 dB(A) • Stabdymo trukmė: 60 ms • Stabdymo kelias: 6 mm • Vardinė srovė: 11,4 A • Fazių skaičius: 3 • Įtampa / dažnis: 400 V / 50 Hz (415 V / 50 Hz) • Įrengtoji galia: 6 kW

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2023, veikimo valandos: 4 937 h, spaudimo jėga: 102 t, bendras svoris: 7 200 kg, ašių skaičius: 8, Šis 8s AMADA HRB 1003 preso stabdys buvo pagamintas 2023 m. Jo spaudimo jėga yra 1000 kN, o eiga - 250 mm, todėl jis tinka įvairiems darbams. Jis sveria 7200 kg ir turi AMNC3i valdymo sistemą su "Lite" režimu, todėl pasižymi pažangiomis galimybėmis. Apsvarstykite galimybę įsigyti šį AMADA HRB 1003 presinį stabdį. Susisiekite su mumis dėl išsamesnės informacijos. • Eiga: 250 mm • Įtampa: 400/415 V • Dažnis: 50 Hz • Fazės: 3 Crjdsyk Dc Njpfx Af Aob • Įrengtoji galia: 18,6 kW • Visiškos apkrovos srovė: 29,8 A • Triukšmo lygis: 72 dB(A) • Spaudimo spindulio ilgis: 3110 mm • Atidarymo plotis: 520 mm • Ašys: 7 programuojamos • Valdymas: AMNC3i su "Lite" režimu • Konfigūracija: Be karūnavimo • Įrankių prispaudimas: S-GRIP DUOGalimi įrankiai:3 "Amada" perforatoriai Nr. 831206, 835 mm ilgio, ir 1 padalintas variantas: 3 "Amada" perforatoriai Nr. 820806, 835 mm ilgio, ir 1 padalinta versija Plius štampai: 3 vnt. V 16 / H 120 / 85° x 835 mm ilgio ir 1 vnt. padalinta konstrukcija 2 vnt. V 16 / H 120 / 88° x 835 mm ilgio 3 vnt. V 32 / 85° x 835 mm ilgio ir 1 vnt. padalinta konstrukcija 3 vnt. V 8 / V 12 / 88° x 835 mm ilgio ir 1 vnt. padalinta konstrukcija 3 vnt.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2025, ašių skaičius: 3, Šis 3 ašių QUICK CNC KQ-63E buvo pagamintas 2025 m. Tai kelių suklių gręžimo staklės, galinčios apdirbti nuo 70 iki 2800 mm ilgio ir nuo 50 iki 1220 mm pločio ruošinius. Funkcijos apima viršutinį ir apatinį frezavimo suklius, greitaeigį įrankių keitiklį ir bešepetėlinius servo variklius. Jei ieškote aukštos kokybės gręžimo galimybių, apsvarstykite mūsų parduodamas QUICK CNC KQ-63E stakles. Susisiekite su mumis ir gaukite daugiau informacijos. • Ruošinio ilgis: 70-2800 mm • Ruošinio plotis: 50-1220 mm • Ruošinio storis: 9-60 mm • Mažiausias apdirbamas ruošinys: 70 x 50 mm • Transportavimo greitis X: 135 m/min • Transportavimo greitis Y: 90 m/min • Transportavimo greitis Z: 25 m/min Cedpfx Aex D Dnkef Aerb • Atskirai valdomi velenai: Viršutinis 2 x 12 vertikalių, 4 horizontalūs / Apatinis 1 x 7 vertikalių • Mašinos valdymas: Higerman (vokiečių kalba) • Viršutinis frezavimo velenas: 9 kW, 24 000 aps./min. • Viršutinis įrankių keitiklis: 5 kartus • Bottom milling spindle: 3,5 kW, 18 000 aps./min. • Varikliai: Bešepetėliniai servo varikliai • Pozicionavimo tikslumas: 0,03/1000 • Pakartojimo tikslumas: 0,02/1000 Papildoma informacija • Ruošinio grąžinimas neįtrauktas į komplektą. Mašinos kaina, įskaitant ruošinių grąžinimą, yra 97 950 €.

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), X ašies eiga: 3 050 mm, Y ašies eiga: 1 525 mm, Z ašies eigos atstumas: 37 mm, bendras svoris: 21 500 kg, bendras aukštis: 2 342 mm, ašių skaičius: 4, Šis 4 ašių AMADA EMZ3612M2 buvo pagamintas 2016 m., turi greitaeigį servoelektrinį bokštinį štampavimo presą su dviem kintamosios srovės servo tiesioginėmis pavaromis. Jis gali pasigirti 33 tonų preso našumu ir AMNC-F / AMNC-4ie CNC sistema, užtikrinančia geresnį valdymą. Mašina apdoroja iki 3050x1525 mm formato lakštus ir turi "King" bokštelį su 58 stotimis. Energijos vartojimo efektyvumą optimizuoja kintamosios srovės servo pavaros. Jei ieškote aukštos kokybės perforavimo galimybių, apsvarstykite mūsų parduodamas "AMADA EMZ3612M2" stakles. Susisiekite su mumis ir gaukite daugiau informacijos. Papildoma įranga Codpox Nrktefx Af Aerb • Oro pūtimo alyvos rūko tepimas • Šliužų vakuuminė sistema • Skaitmeninė įrankių ID / brūkšninių brūkšninių kodų sistema • Integruotas sriegimas: colių / metriniai sriegikliai (M2,5–M8) • Žymėjimo ir šerpetų šalinimo įrankiai: įmontuotos žymėjimo ir šerpetų šalinimo parinktys Mašinos privalumai Techninės mašinos privalumai • Tipas: didelio greičio servoelektrinis revolverinis perforatorius su dviem tiesioginės ac servo pavaros mechanizmais • Preso galia: 33 tonos (300 kn) • Didžiausias lapo formatas (be perkėlimo): 3050 × 1525 mm • Bokštelio tipas: „karališkas“ bokštelis – trijų bėgelių, galima įsigyti 55 pozicijų daugiafunkcinę arba 58 pozicijų versiją, su 4 automatinio indeksavimo stotimis, įskaitant sriegimo įrenginius • Bokštelio sukimosi greitis: iki 30 aps. /min. • Padavimo tarpas: 25 mm tarp revolverinių plokščių • Maks. Lakšto storis: 4,5 mm • Padėties nustatymo greitis (x/y): 100 m/min / 80 m/min Papildoma informacija Mašina vis dar įjungta Dimensions Machine Depth 5436 mm

Būklė: naudotas, Gamybos metai: 1998, AMADA - HFBO 125-4 - 1998 - 8 valdomų ašių - 125 t - stalas 4000 mm - kompensacija (crowning) - komplekte daug įrankių Crjdpfx Asyl Svmsf Ajb - darbo valandos: 44 410

Būklė: geras (naudotas), Gamybos metai: 2003, Horizontal band saw, fully automatic, with vise feed Cutting capacity 90° Round: 400 mm Square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lift, and material feed • Vise feed • Worm chip conveyor • Fully automatic operation or single cuts • Automatic adjustment of bow lift height according to material diameter • Max. cut length 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw blade tension with automatic shutoff in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE-compliant Cjdpfx Asynaz Nof Ajrb Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), Bendri duomenys Staklių svoris: 4700 kg Valdymo blokas Prekės ženklas: AMADA Pagrindinė pavara Spaudimo jėga: 500 kN Cjdpsx D H I Hsfx Af Ajrb Eiga: 200 mm Ašių skaičius: 8 Šis 8 ašių AMADA HFE M2 5020 pagamintas 2011 m. Tai – hidraulinis lankstymo presas, kurio maksimali spaudimo jėga yra 500 kN, eiga iki 200 mm. Svoris – 4700 kg, triukšmo lygis – 74 dB(A), CE sertifikatas, pagaminta Prancūzijoje. Jei ieškote aukštos kokybės lenkimo galimybių, rekomenduojame mūsų siūlomą AMADA HFE M2 5020. Dėl daugiau informacijos susisiekite su mumis. Naudojimo sritys Lankstymas

Būklė: naudotas, Gamybos metai: 1999, Amada Europe 245 CNC bokštelinė presformavimo staklė. S/Nr. 245013 (1999), su GE Fanuc Series 18i-P valdymu, maksimali jėga 200 kN, maksimalus eiga 1290 mm, apsauginės šviesos užtvaros, įvairių elektrinių įrankių kiekis. Credpfxjy D Rb Te Af Ajb Vieta: Šios prekės yra Yeovil mieste, JK. Pastaba: Vietoje nėra pakrovimo galimybių, išmontavimo ir pakrovimo išlaidos tenka pirkėjui.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Techniniai duomenys: maks. pjovimo plotis: 4050 mm maks. pjovimo galia, plienas ST40: 8,0 mm maks. pjovimo galia, nerūdijantis plienas: 6,0 mm maks. pjovimo galia, aliuminis: 8,0 mm motorizuotas reguliuojamas lygiagretusis atmušas: 1000 mm pjovimo tarpo reguliavimas pjovimo kampo nustatymas: 2,2° lapo pakėlimo įtaisas variklio galia: 15 kW matmenys (ilgis x plotis x aukštis): apytiksliai 4800 x 2200 x 2150 mm svoris: apie 11,5 tonos Credsywd Ndspfx Af Asb Pardavėjas neatsako už rašybos ar duomenų perdavimo klaidas. Mašina pagal išvaizdą, techninę būklę ir nusidėvėjimą atitinka savo amžių; naudotos mašinos parduodamos be jokios garantijos.

Būklė: geras (naudotas), Gamybos metai: 2014, centro aukštis: 180 mm, plotis centre: 600 mm, šlifavimo skersmuo: 260 mm,

Būklė: naujas, Gamybos metai: 2025, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 4 000 mm, Y ašies eiga: 1 000 mm, Z ašies eigos atstumas: 1 000 mm, valdiklių gamintojas: STYLE CNC Machines, įrankių magazino lizdų skaičius: 24, variklių gamintojas: FANUC, Pristatymas pagal susitarimą Ref.: 24F048 Gamybos metai: 2025 Būklė: Parodų salės Specifikacijos: Csdpew Ty S Sefx Af Aorb - X ašis: 4000 mm - Y ašis: 1000 mm - Z ašis: 1000 mm - Pagrindinis variklis 26 kW (S6) - 8000 aps./min - BT-40 - Automatinis įrankių keitiklis (24 pozicijos) - Nuotolinis aptarnavimas (IXON) + tinklo jungtis - Stipresnis aušinimo siurblys su purkštuvu - Atnaujinta iki naujausios STYLE programinės versijos

Būklė: naudotas, Gamybos metai: 2015, Operating hours machine: 31,888 (as of 17.01.2024) h Operating hours laser on: 19,090 (as of 17.01.2024) h Operating hours beam on: 6,475 (as of 17.01.2024) h Laser power: 4,000 watts Max. punching force: 300 kN Control unit: AMNC 3i Working area laser operation: 2,500 x 1,170 mm Working area punching operation: 3,050 x 1,525 mm Length: 7,870 mm Width: 5,880 mm Height: 2,666 mm Total connected load: 85 kVA X-axis: 100 m/min Y-axis: 80 m/min Machine weight approx.: 30,000 kg Standard equipment - Patented servo-electric twin drive - Punching force 300 kN - 32 tool stations (4 indexable stations) - Max. stroke rate: 400 - Max. material thickness: 6 mm - Automatic focus adjustment - Automatic gas pressure regulation Cjdpfx Afoypt R Hs Ajrb - HS sensor cutting head - Nozzle cleaning - Splash guard - Good part flap Additional equipment - TSU Tool changer 300 Automation

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, mašinos/transporto priemonės numeris: HFE 220-3 N080201, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 24 330 h, galia: 20 kW (27,19 AG), įėjimo įtampa: 400 V, lenkimo jėga (didž.): 2 200 t, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: hidraulinis, Įranga: apatinis įrankis, apsaugos šviesos užtvara, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, pirštų apsauga, viršutinis įrankis, Puikiai tinka metalo gamybai. Tinkamai prižiūrėtas, paruoštas naudojimui! Išsami informacija ir apžiūra telefonu. Codpfx Afjyqvats Asrb

Būklė: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: ARIES -255, bendras svoris: 10 400 kg, Parduodamas naudotas lakštų apdirbimo centras AMADA Aries 255 (1998 m.). Darbo sritis 1250x2500 mm (be perstatymo – 1250x1250 mm). Veikiantis, yra Estijoje (galima išbandyti). Pridedami įrankiai pažymėti nuotraukoje. Crodpfx Afjxxiv Aj Aob Kaina 10 000 EUR + PVM. Kaina neįskaičiuoja transportavimo.

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 6 000 W, FIBER CUT laser cutting machines offer a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These cutting machines are characterized by high speeds, productivity, and exceptional cutting accuracy, delivering unrivaled precision and repeatability. Our fiber lasers are primarily intended for processing the following materials: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER SOURCE POWER 6000W CONSTRUCTION Our laser frame is designed and manufactured from the ground up in our own factory. The high-quality steel used in production is cut, welded, and precisely machined. The entire frame, gantry, and gantry arms feature additional ribbing, which provides high rigidity and eliminates vibrations and deformations. DRIVES Our machines are powered by Schneider AC servo motors with high resolution and power (Y1Y2 x 2000W, x 1500W, z 400W) to ensure optimal acceleration and speeds in each axis. Power transmission is achieved using high-quality planetary gearboxes. The X and Y axes utilize classic, proven helical racks, guaranteeing durability and precision. CUTTING HEAD The WSX liquid-cooled cutting head is designed for sheet metal processing. High-grade quartz glass lenses focus the laser beam onto the material, ensuring superior cutting accuracy. For consistent results, the HSU system automatically adjusts the head height to irregularities in the material. A protective window located between the nozzle and lens shields the lens assembly from molten metal splatter. LASER SOURCE The machine uses a Raycus Laser light source with high electro-optical conversion efficiency, low energy consumption, and excellent beam quality. This provides faster and more effective operation while reducing the likelihood of operator errors. The source is also resistant to back-reflection, ensuring no return beam to the laser. Stable power output guarantees efficient operation with minimal energy use. COOLING Industrial S&A CWFL dual-temperature chillers are specially designed for fiber laser cooling. They feature several alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm. EXCHANGEABLE WORKTABLE Cedpfsx Tphwox Af Asrb The exchangeable worktable, located at the rear of the machine, almost completely eliminates laser downtime. Automatic table exchange takes just 10 seconds, allowing the operator to remove cut parts and load a new sheet while the laser works on the second table. This system ensures very high production continuity. AUTOMATIC LUBRICATION SYSTEM To maintain optimal machine condition, the racks and guides must be lubricated with oil every few days. The automatic lubrication system activates at preset intervals and delivers the correct amount, with all parameters set in the software.

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 12 000 W, FIBER CUT laser cutting machines are a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal compared to CO2 lasers. These machines feature high speeds, productivity, and exceptional cutting accuracy, providing unmatched precision and repeatability. Our fiber lasers are primarily designed for processing materials such as: - Non-ferrous metals - Aluminum - Stainless steel - Carbon steel LASER POWER SOURCE 12000W CONSTRUCTION The frame of our laser machine is designed and manufactured entirely in our factory. High-quality steel is used for production, which is cut, welded, and then precision-machined. The entire frame, gantry, and gantry arms are reinforced with additional ribbing to ensure high rigidity and to eliminate vibrations and deformations. DRIVES Our machines are equipped with high-resolution, high-power Schneider AC servo motors (Y1/Y2 x 2000W, X 1500W, Z 400W), ensuring proper acceleration and speeds in each axis. Power transmission is provided via high-grade planetary gearboxes. The X and Y axes utilize robust, proven helical racks that guarantee durability and precision. CUTTING HEAD Sheet metal cutting is performed using a water-cooled WSX cutting head. High-quality quartz glass lenses focus the dispersed laser beam onto the workpiece, ensuring precise cutting. The HSU system automatically adjusts the head height to compensate for material unevenness. A protective window between the nozzle and the lens safeguards the lens group from molten metal splatter. LASER SOURCE The machine is equipped with a Raycus Laser source, which offers high electro-optical conversion efficiency, low energy consumption, and a high-quality beam. This enables faster, more efficient operation and helps minimize operator errors. The laser source is resistant to back reflection, preventing beam return to the laser. Stable power delivery ensures effective performance with minimal energy use. COOLING Industrial-grade S&A CWFL dual-temperature chillers are specially designed for fiber laser cooling. They feature multiple alarm functions: compressor time delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarms. EXCHANGEABLE WORKTABLE The exchangeable worktable, located at the rear of the machine, minimizes laser downtime. Automatic table exchange takes only 10 seconds. This allows the operator to remove cut parts and load new sheet material while the laser operates on the other table. This system ensures very high production efficiency. Credpfx Aox Tpcbef Asb AUTOMATIC LUBRICATION SYSTEM To keep the machine in optimal condition, racks and linear guides must be lubricated with oil at least every few days. The automatic system activates lubrication at set intervals and in the proper amount, with all parameters adjustable via the control software.

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 6 000 W, FIBER CUT laser cutting machines offer a revolutionary solution in the laser cutting market. The innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These cutting machines are characterized by high speeds, productivity, and exceptional cutting accuracy, delivering unrivaled precision and repeatability. Our fiber lasers are primarily intended for processing the following materials: - Non-ferrous metals - Aluminum Crsdpfx Afex Tn U Aj Aob - Stainless steel - Carbon steel LASER SOURCE POWER 6000W CONSTRUCTION Our laser frame is designed and manufactured from the ground up in our own factory. The high-quality steel used in production is cut, welded, and precisely machined. The entire frame, gantry, and gantry arms feature additional ribbing, which provides high rigidity and eliminates vibrations and deformations. DRIVES Our machines are powered by Schneider AC servo motors with high resolution and power (Y1Y2 x 2000W, x 1500W, z 400W) to ensure optimal acceleration and speeds in each axis. Power transmission is achieved using high-quality planetary gearboxes. The X and Y axes utilize classic, proven helical racks, guaranteeing durability and precision. CUTTING HEAD The WSX liquid-cooled cutting head is designed for sheet metal processing. High-grade quartz glass lenses focus the laser beam onto the material, ensuring superior cutting accuracy. For consistent results, the HSU system automatically adjusts the head height to irregularities in the material. A protective window located between the nozzle and lens shields the lens assembly from molten metal splatter. LASER SOURCE The machine uses a Raycus Laser light source with high electro-optical conversion efficiency, low energy consumption, and excellent beam quality. This provides faster and more effective operation while reducing the likelihood of operator errors. The source is also resistant to back-reflection, ensuring no return beam to the laser. Stable power output guarantees efficient operation with minimal energy use. COOLING Industrial S&A CWFL dual-temperature chillers are specially designed for fiber laser cooling. They feature several alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm. EXCHANGEABLE WORKTABLE The exchangeable worktable, located at the rear of the machine, almost completely eliminates laser downtime. Automatic table exchange takes just 10 seconds, allowing the operator to remove cut parts and load a new sheet while the laser works on the second table. This system ensures very high production continuity. AUTOMATIC LUBRICATION SYSTEM To maintain optimal machine condition, the racks and guides must be lubricated with oil every few days. The automatic lubrication system activates at preset intervals and delivers the correct amount, with all parameters set in the software.

Būklė: naujas, Gamybos metai: 2026, lazeri tipas: šviesolaidinis lazeris, lazerio galia: 3 000 W, The FIBER CUT laser cutting machines are a revolutionary solution on the laser cutting market. Innovative fiber laser technology enables much faster, more efficient, and cost-effective sheet metal cutting compared to CO2 lasers. These cutting machines feature high speed, productivity, and exceptional cutting accuracy. They deliver unparalleled precision and repeatability. Our fiber lasers are primarily intended for processing the following materials: - Non-ferrous metals Crsdpfx Asx Tn S Ief Asb - Aluminum - Stainless steel - Carbon steel LASER SOURCE POWER: 3000W CONSTRUCTION The frame of our laser has been designed and manufactured entirely in our factory. The high-grade steel used for machine production is cut, then welded, and precisely machined. The entire frame, gantry, and gantry arms have additional ribbing to ensure high rigidity and eliminate vibrations and deformations. DRIVES Our machines are powered by high-resolution, high-power Schneider AC servo systems (Y1Y2 x 2000W, x 1500W, z 400W), ensuring proper acceleration and speed in all directions. Power transmission is achieved through high-quality planetary gearboxes. Classic, proven helical racks are used on the X and Y axes, ensuring durability and precision. CUTTING HEAD Sheet metal cutting is performed with a water-cooled WSX head. High-grade quartz glass lenses focus the dispersed laser beam on the material, ensuring high cutting accuracy. To maintain optimal processing, the HSU system automatically adjusts the head height, compensating for material irregularities. A protective window located between the nozzle and the lens shields the lens assembly from splashes of molten metal. LASER SOURCE The machine uses a Raycus Laser source, known for high electro-optical conversion efficiency, low energy consumption, and superior beam quality. This allows for faster, more effective operation and helps eliminate operator errors. The source is also resistant to back reflection, i.e., the return of the beam to the laser. Stable power output ensures efficient operation while minimizing energy consumption. COOLING Industrial S&A CWFL dual-temperature chillers are specially designed for cooling fiber lasers. These units are equipped with extensive alarm functions: compressor delay protection, compressor overcurrent protection, water flow alarm, and high/low temperature alarm. EXCHANGEABLE WORK TABLE The exchangeable work table, located at the rear of the machine, minimizes laser downtime. Automatic table exchange takes only 10 seconds. This feature allows the operator to remove cut parts from the table and load a new metal sheet while the laser continues working on the other table. This system guarantees a very high production throughput. AUTOMATIC LUBRICATION SYSTEM To keep the machine in optimal condition, rack and guide rails must be lubricated with oil at least every few days. The automatic system initiates lubrication at preset intervals and in the correct quantity, with all parameters configurable via the software.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, Pressure 170 t Bending length 3170 mm Distance between uprights 2700 mm Throat depth 420 mm Installation height 470 mm Csdpsxabgpsfx Af Aerb Stroke 200 mm Approach speed 100 mm/sec Working speed 10.0 mm/sec Return speed 100 mm/sec Table width 180 mm Table height 960 mm Oil capacity 235 L Pressure 300 bar CNC-controlled axes 6 Operating hours 29,400 h Total power requirement 16.5 kW Machine weight approx. 11,910 kg Dimensions (LxWxH) 4025 x 2020 x 2900 mm Well-maintained condition (!!) Only approx. 29,400 operating hours - Inspected condition - Machine video - ?v=APP0HZjMms4 Equipment: - Electro-hydraulic CNC press brake - AMADA CNC controller "OPERATEUR 2" - 6 axes (X, Y1+Y2, R, Z1+Z2) * Swiveling control panel - front left * Tool & program library - CNC-controlled backgauge adjustment (X-axis) * Adjustment range ... 700 mm - CNC-controlled vertical adjustment of the backgauge fingers (R-axis) * Adjustment range ... 250 mm - CNC-controlled left-right adjustment of backgauge fingers (Z1+Z2) - Handheld remote control for manual axis movement - AMADA manual upper tool clamping system - AMADA gooseneck upper tools - segmented - AMADA lower tool holder - incl. 1x V-die (not complete) - AMADA DIGI PRO - digital angle measuring system - 1x movable double footswitch - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - Emergency stop button at the front - Operating manual (ENG)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: HFP 130-3 N050242, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 4 970 h, eigos ilgis: 200 mm, bendras svoris: 8 170 kg, lenkimo jėga (didž.): 132 t, darbinis ilgis: 3 100 mm, TECHNINIAI DUOMENYS Spaudimo jėga: 1.300 kN Didžiausias eiga: 200 mm Darbinis ilgis: 3.100 mm ĮRENGINIO DUOMENYS 8 ašių konfigūracija: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Credpfoylv Rhjx Af Asb Svoris: 8.170 kg Įtampa: 400 V Dažnis: 50 Hz Nominali srovė: 213 A Darbo valandos: 4.970 h ĮRANGA Automatinė Fiessler Alas lazerinė sistema Įrankių tvirtinimas Euro stiliaus su greito keitimo adapteriais

Būklė: naujas, Gamybos metai: 2026, This is a modern CNC plasma cutter designed for industrial applications, used for cutting sheet metal and profiles with a plasma torch. It features a robust construction made from the highest quality steel and aluminum, a large cutting area, the ability to cut elements of any shape, and low process execution costs. Material cutting is performed in a short time while maintaining high precision of detail reproduction. To obtain the desired shape, simply import a file into the software, making operation of this cutter easy and intuitive. Crodpour R Erofx Af Asb Our plasma cutters are primarily intended for processing the following materials: - Mild steel - Stainless steel CONSTRUCTION The plasma cutter frame is designed and manufactured from scratch in our factory. The high-quality steel used in machine production is cut, welded, and then subjected to precise machining. The entire frame, gantry, and gantry arms are additionally reinforced with ribs to provide high rigidity and eliminate vibrations and deformations. DRIVES Our cutters are equipped with high-resolution, high-power Servo AC motors, which ensure proper acceleration and speed in all directions. These are very dynamic and precise motors with feedback control, guaranteeing no deviation by continuously monitoring operating parameters. Classical and proven helical racks are used on the X and Y axes, providing high durability and precision. TORCH Our plasma machines are fitted with components from the leading manufacturer PGCNC. The technologies applied in the torch significantly increase productivity and cutting speed. HD technology ensures improved hole quality, greater piercing capability, and bevel cutting options. This guarantees high quality, repeatable cuts and maximizes productivity with minimal operating costs and maximum reliability. SLATTED TABLE The slatted table is manufactured using technology that is resistant to high-temperature operation. This allows for continuous work without the risk of burn-throughs that would prevent even material placement on the worktable. The arrangement of the slats can be easily adjusted depending on the size of the cut parts. The slatted table is an excellent solution for cutting thicker materials. SOFTWARE The machine comes equipped with Starfire 2D CAD/CAM software. Users have access to various functions, including the ability to import ready-made vector designs in formats such as .dxf, .plt, .ai, and .eps. The program ensures fast and precise generation of cutting paths. POWER SOURCE The machine's standard equipment includes a 120A power source, distinguished by high performance, cutting quality, and speed. AUTOMATIC LUBRICATION SYSTEM The plasma cutter is also equipped with an automatic lubrication system, minimizing the need for maintenance. The central lubrication system is a simple and functional device designed to deliver oil to points where machine components are in contact with one another.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, FIBER CUT laser cutting machines represent a revolutionary solution! Innovative fiber laser technology enables much faster, more efficient, and cost-effective cutting of sheet metal components compared to CO2 lasers. These machines are characterized by high cutting speeds, superior efficiency, and exceptional precision. They ensure unmatched accuracy and repeatability. Cedpfxouruyas Af Ajrb Our fiber lasers are primarily designed for processing materials such as: - Non-ferrous metals - Aluminium - Stainless steel - Carbon steel CONSTRUCTION The frame of our laser is designed and manufactured in-house at our facility. The high-quality steel used in production is cut, welded, and then subjected to precision machining. The entire frame, gantry, and gantry arms are reinforced with additional ribbing to ensure high rigidity and eliminate vibrations and deformations. LASER SOURCE The machine utilizes a Raycus Laser light source with high electro-optical conversion efficiency, low energy consumption, and superior beam quality. This not only allows for faster and more effective operation, but also helps prevent operator errors. Furthermore, the laser source is resistant to backreflection effects (the return of the beam to the laser). Stable power output guarantees efficient operation with low energy consumption. AUTOMATIC LUBRICATION SYSTEM To maintain the machine in optimal condition, the racks and linear guides must be lubricated with oil at least every few days. The automatic system triggers lubrication at specified intervals and in the correct quantity; all parameters are set within the software. - Working area: 1500 x 3000 mm - Cutting head: NC30E - CYPCUT 2000E control system - Japanese SMG linear guideways - LEADRACK drive system - LEADSHINE BUS XY 750W servomotors - Shimpo reducer - Raycus 3kW laser source (CE) - Extraction fan, provided as standard with computer

Būklė: naujas, Gamybos metai: 2026, The ATC plotter series has been designed for professional use in large industrial plants and factories, serving the production of complex large-format components. Thanks to its special construction, the machine is adapted for manufacturing, among other things, foundry models and yachts, significantly reducing processing time. To meet the requirements of heavy-duty machining, ATC machines feature additionally reinforced frames and more powerful AC servo drives on each axis. The presence of five axes supports the processing of even the most demanding components. Plotters in this series are standardly equipped with automatic tool changers, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials that can be machined: - Wood - Wood-based materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads related to the machining process. WORKING AREA: The usable working area of our machine is 3000 x 6000 [mm]. Z-AXIS RANGE AND GANTRY CLEARANCE: Parameters can be tailored to individual customer requirements. DRIVES: Our machines are driven by SERVO motors, ensuring proper acceleration and speed in every direction. The X and Y axes use classic, proven helical racks for durability and precision, while the Z axis is powered by a high-quality ball screw. All axes run on linear rail guides. SPINDLE: A high-class, powerful brushless spindle drives the cutting tool. Spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter with greater power than the spindle is used for power supply, protecting against speed drops under heavy load. Codpfxjiq U Tqs Af Aerb TOOL MAGAZINE: Standard equipment includes a linear tool magazine with six HSK holders. Additional tool magazine positions are available as an option. SOFTWARE: The machine is supplied with dedicated CAD/CAM software, enabling fast and easy design of parts, which the program then converts into G-code. Import of ready-made files from other programs is also possible. CONTROL SYSTEM: Operation is managed via a controller equipped with its own processor and operational memory, ensuring stable and reliable performance.

Būklė: naujas, Gamybos metai: 2026, CNC Milling Router 2030 ATC 4 axes, tilting spindle +/- 90 degrees Working area: 2100 x 3000 mm The ATC router series is designed for professional applications in large industrial facilities and factories. These machines are intended for machining a wide range of materials. To meet the demands of heavy-duty processing, the ATC machines are equipped with an additionally reinforced frame and more powerful AC servo drives on each axis. A vacuum table is standard equipment on these machines. It is also possible to install a hybrid table. Routers in this series are equipped as standard with automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly speed up machining processes that require the use of multiple cutters. Materials processed: - Wood - Wood-based materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminum, brass, copper, etc.) Cedpsirfavofx Af Asrb CONSTRUCTION: The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads associated with machining processes. WORKING AREA: The usable area of our CNC is 2100 x 3000 mm. MATERIAL FIXING: The machine is equipped with a vacuum table. Optionally, a hybrid or T-slot table can be installed. Z-AXIS RANGE AND GANTRY CLEARANCE: Standard Z-axis travel is 300 mm (option to increase available). DRIVES: Our CNC machines use SERVO motors, ensuring adequate acceleration and speed in all directions. The X and Y axes utilize proven helical racks, delivering both long lifespan and precision, while the Z axis is driven by a high-quality ball screw. All axes move on linear rail guides. SPINDLE: The cutting tool is powered by a high-performance, water-cooled, durable brushless spindle. The spindle utilizes high-quality machine bearings for exceptionally quiet operation and above-average durability. Spindle speed ranges from 6,000 to 24,000 rpm. Power is supplied by an inverter with a higher power rating than the spindle, preventing speed drops during heavy-load operation. TOOL MAGAZINE: Standard equipment includes a linear tool magazine with 6 ISO30 tool holders. SOFTWARE: The machine comes with the latest version of CAD/CAM software. The software allows fast and easy design of components, which are then converted into G-code. It is also possible to import ready-made files from other software. CONTROL: Control is via a controller with its own processor and operational memory, ensuring stable and reliable operation. The controller offers active vector analysis for smooth machine movement and minimal processing errors. The controller features a resume function after power loss, eliminating the need to restart the program. Internal memory allows the machine to operate without reloading the program each time.