Wmw Wildau Lakštinio Metalo Tiesinimo Staklės pirkti naudotą (48 816)

Būklė: naujas, Sheet width: 1570 mm Sheet thickness: 10 mm Pre-bending: 8 mm Total power requirement: 7 kW Machine weight: approx. 4.5 t Space requirement: approx. 3.5 x 1.5 x 1.55 m – 4 rolls – Capacity: 1570 x 10 – Pre-bending: 8 mm – Hardened rolls – Upper roll diameter: 220 mm – Lower roll diameter: 220 mm – Side roll diameter: 180 mm – Hydraulic – Digital display for left roll movement – Digital display for middle lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – Steel construction ST-52 – Hydraulic drop-end for easy roll positioning Iodpfx Alsvkixxsdjth – Hydraulic up/down movement system with middle and side rolls – Hydraulic balancing system – Overvoltage protection – Documentation – 400V

Būklė: naujas, Sheet width 700 mm Sheet thickness 2.0 mm Frame opening 750 mm Upper roll diameter 76 mm Total power requirement 0.75 kW Machine weight approx. 0.29 t Space requirement approx. 1.3 x 0.8 x 1.3 m Plate bending machine with: - Capacity 700 x 2 mm Itedpfx Ajrrkdksldeh - High-strength, drop-forged rolls with SAE 1050 certification - Upper and lower rolls powered, idler roll unpowered - Foot switch - Conical bending - Swiveling upper roll - Emergency stop safety wire - Documentation - CE marking - 400 Volt

Būklė: naujas, Sheet width 700 mm Sheet thickness 4.0 mm Stand width 720 mm Itsdpfx Aljfv H Axodsh Upper roller diameter 95 mm Total power requirement 1.1 kW Machine weight approx. 0.37 t Space requirement approx. 0.95 x 0.76 x 1.25 m Sheet bending machine with special dimensions: - Capacity 700 x 4 mm - 2 speeds - Electrically adjustable rear roller - Digital display for rear roller - Hardened rollers - Conical bending - Swiveling upper roller - Emergency stop safety rope - Documentation - 400V

Būklė: naujas, Sheet width: 700 mm Sheet thickness: 4.0 mm Frame width: 720 mm Upper roller diameter: 95 mm Total power requirement: 1.1 kW Machine weight approx. 0.37 t Space required approx. 0.95 x 0.76 x 1.25 m Iedpjwfyqysfx Aldeth Special-size plate bending machine: - Capacity: 700 x 4 mm - Conical bending - Swing-out upper roller - Emergency stop safety cable - Documentation - 400V

Būklė: naujas, Sheet width: 610 mm Sheet thickness: 1.0 mm Frame width: 620 mm Upper roller diameter: 38 mm Ijdpfx Aleupxi Tjdoth Total power requirement: manual operation Machine weight: approx. 40 kg Space requirement: approx. 950 x 270 x 360 mm Sheet metal bending machine with: - Capacity: 610 x 1.0 mm - Swing-out upper roller

Būklė: naudotas, Gamybos metai: 1995, Sheet width 2100 mm Sheet thickness 2.0 mm Stand width 2150 mm Roll diameter 90 mm Total power requirement 1.5 kW Machine weight approx. 0.7 t Ijdpfx Alewrzrrsdoth Space requirements approx. 2.5 x 0.7 x 1.3 m 3-roll plate bending machine - 2 driven rolls - Foot switch - Emergency stop device

Būklė: naujas, Sheet width: 3100 mm Sheet thickness: 13.0 mm Pre-bending: 10.0 mm Top roller diameter: 300 mm Side roller diameter: 210 mm Bottom roller diameter: 270 mm Total power requirement: 11.0 kW Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rollers (top & bottom roller) - With hydraulic cone bending device - Induction-hardened rollers - Includes straightening function for welded pipes - Control unit/display with touchscreen function * Digital position display for both side rollers - Mobile control panel - 2x selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cable with switch unit) - Manometer / pressure gauge for the rollers - CE marking + Declaration of Conformity Itsdpfjxabfljx Aldsh - Operating manual

Būklė: naujas, Sheet width: 1600 mm Sheet thickness: 15.0 mm steel Bending capacity: 13.0 mm steel Top roll diameter: 230 mm Side roll diameter: 210 mm Lower roll diameter: 190 mm Total power requirement: 7.5 kW Machine weight: approx. 4225 kg Space requirements: approx. 4000 x 1300 x 1440 mm Features: - Electro-hydraulic 4-roll plate rolling machine Iodpexabkhofx Aldsth - 2 driven main rolls (top & bottom roll) - With hydraulic conical bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit/display with touchscreen function * Digital position display for the two side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) - Manometer/pressure gauge for the rolls - CE mark & declaration of conformity - Operating manual Image shows the same model series

Būklė: naujas, Sheet width: 2,600 mm Sheet thickness: 10.0 mm Bending capacity: 8.0 mm Top roller diameter: 230 mm Side roller diameter: 190 mm Lower roller diameter: 210 mm Total power requirement: 7.5 kW Machine weight approx.: 5,560 kg Dimensions (L x W x H): 4,650 x 1,380 x 1,300 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rollers (top & bottom) - With hydraulic cone bending device - Induction-hardened rollers - Includes straightening function for welded pipes - Control unit / display with touchscreen functionality * Digital position indicator for both side rollers - Mobile operating console Itjdpfxoxaalqj Aldjh - 2 selectable bending speeds - Hydraulic drop end bearing - Safety device (safety cord with switch unit) - Manometer / pressure indicator for the rollers - CE marking + Declaration of Conformity - Operating manual

Būklė: naujas, Sheet width: 3100 mm Sheet thickness: 8.0 mm steel Pre-bending: 6.0 mm steel Iodpfx Aloxabm Aedeth Top roll diameter: 230 mm Side roll diameter: 210 mm Bottom roll diameter: 190 mm Total power requirement: 7.5 kW Machine weight: approx. 6,020 kg Space required: approx. 5142 x 1390 x 1300 mm Features: - Electro-hydraulic 4-roll plate bending machine - 2 driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes - Control unit / display with touchscreen function * Digital position display for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic swing bearing - Safety device (safety rope with switching unit) - Manometer / pressure display for the rolls - CE mark + Declaration of Conformity - Operating instructions

Būklė: naujas, Sheet width 4100 mm Sheet thickness 8.0 mm (steel) Bending capacity 6.0 mm (steel) Top roll diameter 300 mm Side roll diameter 210 mm Bottom roll diameter 270 mm Total power requirement 7.5 kW Machine weight approx. 9,930 kg Space required approx. 6532 x 1730 x 1489 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2x powered main rolls (top & bottom roll) - with hydraulic cone bending device - Induction-hardened rolls - Including straightening function for welded pipes - Control unit / display with touchscreen function * digital position indication for both side rolls - Mobile control console - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety rope with switch unit) Itsdpfx Alexab Tcedeh - Manometer / pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual

Būklė: naujas, Sheet width: 4100 mm Sheet thickness: 13.0 mm (steel) Pre-bending: 10.0 mm (steel) Top roll diameter: 360 mm Side roll diameter: 250 mm Lower roll diameter: 330 mm Total power requirement: 11.0 kW Machine weight: approx. 16,000 kg Space requirement: approx. 6542 x 1677 x 1900 mm Features: - Electro-hydraulic 4-roll plate bending machine - 2x driven main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes alignment function for welded pipes Itjdpoxabuyefx Aldjh - Control unit/display with touchscreen function * Digital position display for both side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety wire with switch unit) - Pressure gauge/manometer for the rolls - CE marking + Declaration of Conformity - Operating manual

Būklė: naujas, Sheet width: 2100 mm Sheet thickness: 8.0 mm (steel) Pre-bending: 6.0 mm (steel) Top roll diameter: 190 mm Side roll diameter: 150 mm Bottom roll diameter: 170 mm Total power requirement: 3.0 kW Machine weight: approx. 3,290 kg Space requirements: approx. 4042 x 1380 x 1254 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 powered main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes Iedpfsxab E Eex Aldjth - Control unit/display with touchscreen function * Digital position display for the two side rolls - Mobile control console - 2 selectable bending speeds - Hydraulic drop-end bearing - Safety device (safety cord with switch unit) - Manometer/pressure gauge for the rolls - CE mark + declaration of conformity - Operating manual

Būklė: naujas, Sheet width: 3100 mm Sheet thickness: 16.0 mm steel Pre-bending: 20.0 mm steel Upper roll diameter: 360 mm Side roll diameter: 250 mm Lower roll diameter: 330 mm Total power requirement: 15.0 kW Machine weight approx. 13,200 kg Space requirement approx. 5542 x 2100 x 1983 mm Equipment: - Electro-hydraulic 4-roll plate bending machine - 2 powered main rolls (top & bottom roll) - With hydraulic cone bending device - Induction-hardened rolls - Includes straightening function for welded pipes Isdpsxabzaofx Aldsth - Control unit / display with touchscreen function * Digital position display for the two side rolls - Mobile control panel - 2 selectable bending speeds - Hydraulic drop-end - Safety device (safety cable with switch unit) - Manometer / pressure gauge for the rolls - CE mark + Declaration of Conformity - Operating manual

Būklė: naujas, DM100 ZC – Performs edge rounding and removes sharp burrs on both inner and outer edges of steel, stainless steel, or aluminum parts after laser-cutting, shearing, or punching of metal parts from a minimum size of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) and abrasive belt, removing heavy burrs in the initial step. Itsdpfx Asd Hintjldoh The second station is equipped with two counter-rotating cross-belts with abrasive blocks, rounding the edges of the entire product, both inside and outside, in a second step. A key advantage is deburring products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 ZC: Working capacity (Ø mm): 1100 x 100 No. of belt stations (Z): 1 No. of cross-belt stations: 1 Abrasive belt, dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230 x 2300 x 2250 Weight (kg): 3300

Būklė: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210 Iodpfx Alsd Ev Upsdoth

Būklė: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Itoded Ixadspfx Aldjh Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: ZCV50, ZCV 50 DAİRESSEL TİP TİTREŞİMLİ MAKİNE * Net 50 litre hacim (Talebe bağlı olarak 20 lt ile 1250 lt arası kapasite seçenekleri mevcuttur) Itodpfx Aljw Dp Ekjdjh * Yüksek aşınma dirençli P.U. Kaplama (90 Shore) MOTOR: * Yüksek performanslı üç fazlı akım tahrikli motor * 0,34 kW 1500 d/d * Motor bakımsızdır; yağlama gerektirmez. KONTROL PANELİ: * Ana şalter ve acil durdurma butonu * Zaman ayarlayıcı ve çalışma saati sayacı * Motor için sağ/sol yön anahtarlı kontrol kutusu * CE güvenlik standartlarına uygun BOYAMA: * RAL 5011 & RAL 7036 renk seçenekleri * Boyanın uzun ömürlülüğünü sağlamak için epoksi boya kullanılmaktadır.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, maks. lakšto storis: 5 mm, bendras ilgis: 950 mm, bendras plotis: 850 mm, bendras aukštis: 1 175 mm, bendras svoris: 80 kg, įėjimo įtampa: 380 V, garantijos trukmė: 24 mėnesiai, nominali galia: 1,1 kW (1,50 AG), galia: 1,1 kW (1,50 AG), Įranga: dokumentacija / vadovas, Centrifuginis džiovintuvas Metalo centrifuginis džiovintuvas Techniniai duomenys: Džiovintuvo korpusas Medžiaga: 5 mm storio geležis, nudažyta rūgštims atspariais dažais. Skersmuo: 58 cm, aukštis: 80 cm Džiovinimo krepšys Medžiaga: 1,5 mm storio nerūdijantis plienas, elektropoliruotas. Skersmuo: 44 cm, aukštis: 32 cm Krepšio talpa: 50 l Greitis: 3000 aps./min. Centrifuginis variklis Galia: 1,1 kW, 3000 aps./min. Džiovinimo ventiliatorius Medžiaga: aliuminio liejinys Variklio galia: 0,25 kW Greitis: 3000 aps./min. Ijdpfx Alorkl Unodsth Šildytuvo galia: 2 kW (vamzdinis šildytuvas) Išoriniai matmenys: I: 850 mm P: 850 mm A: 1175 mm

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, maks. lakšto storis: 110 mm, bendras ilgis: 4 370 mm, bendras plotis: 2 205 mm, bendras aukštis: 2 320 mm, bendras svoris: 6 150 kg, įėjimo įtampa: 400 V, ruošinio aukštis (maks.): 110 mm, įėjimo dažnis: 50 Hz, galia: 30 kW (40,79 AG), ruošinio plotis (maks.): 1 200 mm, įėjimo srovė: 59 A, This SER1200 Multibrush VAC is on display in our showroom and has been used only for a few demonstrations. You can still view this machine at our showroom in Bergeijk. Discover the innovatively developed SER1200 Multibrush finishing machine, designed with 4 processing stations and 17 controllable motors. The entire finishing machine can be operated via the HMI touchscreen, which has an intuitive layout, ensuring effortless operation. With this screen, different finishing programs can be easily selected, enabling superior reproducibility of product quality and preventing operator setup errors. Thanks to the automatic height adjustment at the processing stations, consistency and precision are always guaranteed. At the first station of the finishing machine, burrs and irregularities are removed using a grinding unit, resulting in a flat, burr-free surface. After grinding, four oscillating combination brushes apply light pressure to the product, ensuring that all edges and holes are rounded, both around and within the ground surface. The final operation features the Multibrush round brushes, which provide optimal finishing to your product. The six brushes create a non-directional finish and round the edges with a radius of 2+ mm, giving the product a high-quality and durable appearance. The SER1200 Multibrush finishing machine is also available in an XL version, which adds a fifth processing station to the machine. This fifth station consists of a second grinding unit, allowing finer grinding belts or Scotch-Brite belts to be used to create a linear finish on your product. The SER finishing machine utilizes a unique brush combination, for which Q-Fin is the only supplier in the market. We call this: ‘The Ultimate Qombination’, enabling a radius of 2+ mm in a single pass. The SER1200 offers full ERP control and seamless integration into automated production processes — in short, a finishing machine that is ready for the future! Iodpfx Aoyt Nm Esldoth

Būklė: geras (naudotas), Gamybos metai: 2016, This F200XL-VAC is used, but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system designed by Q-Fin. In combination with the straightforward button control system, this ensures that setting up and operating the F200 is self-explanatory, resulting in the user-friendliest machine available on the market. The machine comes standard with infinitely adjustable speed on both the conveyor and the brush(es) and/or grinding head(s), making all possible operations and results achievable. You determine your preferred finish. The F200 XL can be equipped with either a vacuum system (for non-ferrous metals, e.g., stainless steel and aluminum) or a magnetic system (for ferrous metals), based on your choice. These systems ensure effective fixation of the workpieces on the transport table, allowing even small parts (from 10x10 mm) to be processed safely, smoothly, and quickly. At Q-Fin, we firmly believe in a narrow machine for small workpieces and a wider machine for larger workpieces. In many cases, the throughput speed of this machine is up to five times higher than that of comparable machines. You can view this machine in our showroom in Bergeijk. Itodpfx Aloyt Nhvedoh

Būklė: naujas, Sheet width: 1070 mm Sheet thickness: 4 mm Stand width: 1100 mm Upper roll diameter: 110 mm Itodjvki E Sjpfx Aldoh Total power requirement: 5.0 kW Machine weight: approx. 1.2 t Space requirement: approx. 2.0 x 0.9 x 1.1 m Plate bending machine equipped with: - Electrically adjustable rear roll - Digital display for rear roll movement - Hardened rolls - Conical rolling - Swing-out upper roll - Brake motor - Emergency stop - Documentation - 400V

Būklė: naujas, Sheet width: 2070 mm Sheet thickness: 10 mm Bending capacity: 8 mm Total power requirement: 7 kW Machine weight: approx. 5 t Space requirement: approx. 4050 x 1470 x 1550 mm – 4 rolls – Capacity: 2070 x 10 – Bending capacity: 2070 x 8 – Hardened rolls – Top roll diameter: 220 mm – Bottom roll diameter: 220 mm – Side roll diameter: 180 mm – Hydraulic operation – Digital display for left roll movement – Digital display for central bottom roll movement – Digital display for right roll movement Iedpfevn U H Ajx Aldeth – Top roll hydraulically tiltable – Steel construction ST-52 – Hydraulic drop-end for easy roll positioning – Hydraulic up and down movement system with central and side rolls – Hydraulic balancing system – Overload protection – Documentation – 400V

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, SRS 1300 yra pramoninė lakštinio metalo apdirbimo mašina, kuri vienu praleidimu atlieka užbavimą, briaunų suapvalinimą ir paviršiaus apdailą, optimaliai paruošdama detales po lazerinio ar plazminio pjovimo. ⚙️ Pagrindinės techninės savybės Naudingas plotis: 1300 mm Konfigūracija: 2 abrazyviniai ritininiai galvutės 4–8 rotaciniai šepečiai Įdiegta galia: 39–88 kW Medžiagos: plienas, nerūdijantis plienas, aliuminis, žalvaris Apdirbamas storis: apie 0,5–50 mm 🚀 Našumas Pilnas procesas vienu praleidimu Atplaišų, oksidų ir šlakų pašalinimas Ijdpfoyz Tdljx Aldeth Vienodas briaunų suapvalinimas Paviršiaus apdaila: linijinio grūdo ar be krypties Ruošiniai paruošti dažymui, suvirinimui ar padengimui Didelis pasikartojamumas ir sumažintas rankinis darbas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1, bendras svoris: 4 kg, Vamzdžių lietaus nuvedimui gamybos linija Juostos storis: 0,6 - 0,7 mm Medžiagos kokybė: Plienas ir iš anksto dažytas Produkto diametras: Ø 100 mm (pasirinktinai: 75, 87, 111, 120 mm) Gamybos liniją sudaro: Dviguba galvutė išvyniotuvė: 4+4 tonos, Ritininio formavimo mašina kasetiniu tipu (su papildomomis kasetėmis) Hidraulinis pjaustymo įrenginys. Itodpfx Aswvhnhsldjh