Widia Th10K10 pirkti naudotą (2 010)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Calbe (Saale)
876 km
Mobilioji smulkinimo įranga
DoppstadtInventhor 9
Skambinti
Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 4 689 h, Equipment:
Basic package Inventhor 9:
Nwsdpfx Aeyu Svxsbzsh
- MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emission standard
- Additional hydraulic connection 30 l/min and 70 l/min
- Roller drive via planetary gearbox 380 kW – VARIO –
- Load-sensing system
- Fuel tank 950 liters
- Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm
- Centrally arranged wear strips
- 24 V electric control system
- Additional electric pump to operate the following functions when the engine is off: "rear conveyor raise/lower/fold, comb flap open/close, comb open/close, optional permanent magnet conveyor raise/lower, optional folding hopper raise/lower"
- Complete radio remote control
- Large side fiberglass maintenance doors
- Maintenance-friendly engine compartment with LED lighting
- Hydraulically reversible fan
- Bilateral loading protection
- Fire extinguisher
- Maintenance ladder
- Toolbox
- Acoustic start-up warning
- Doppstadt telematics system
- Paintwork: RAL2011 deep orange
Additional equipment:
- 3-axle semi-trailer running gear assembly
- Size "L-C3" - VARIOMAT shredding system
- Size "L" - "Limiter" (20 units)
- Hydraulic drive unit
- Dual-sided watering
- Rear conveyor 8.5 m, 1,200 mm wide
- Overband magnet neodymium
- Frame for overband magnet neodymium
- Central lubrication with pump
- LED lighting package for engine compartment and rear
Delivery date by arrangement
Mažas skelbimas
Kaufungen
1 042 km
Įrankių presetteris
DMGVio 210 Microset
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2013, 1 used tool presetting device
Manufacturer: DMG
Model: Microset Vio 210
Year: 2013
Serial number: 99510021418
Measuring range X-axis: 410 mm
Measuring range Z-axis: 465 mm
Includes workbench, under-table, 1,400 mm wide,
integrated telescopic drawer cabinet with 5 drawers,
Nwsdpfxsqzgw Ae Abzsh
comes with 15" Terra monitor, keyboard, mouse, Dymo 450 label printer.
Mažas skelbimas
Wardenburg
1 048 km
Kitas
Ufkes Shark 4w
Skambinti
Būklė: naudotas, Gamybos metai: 2024,

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Nattheim
1 177 km
CNC apdirbimo centras
SCM morbidelliM 400
Skambinti
Būklė: naudotas, Gamybos metai: 2016, MORBIDELLI AUTHOR M400
MAIN FEATURES
5-AXIS PROCESSING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY
SOFTWARE XILOG MAESTRO: EXTREMELY EASY PROGRAMMING
"MATIC" WORKTABLE: SINGLE POSITIONING FOR MULTIPLE OPERATIONS
TECHNICAL DATA
AUTHORM400 AXES
Working area X-axis (reference side): 3,680 mm
Working area Y-axis (max. loadable workpiece at rear stops): 1,680 mm
Workpiece passage Z / Number of Z axes: 170 mm / 1
Workpiece length for pendulum operation: 1,650 mm
Travel speed X-Y axes Pro-Speed: 85 m/min
Z-axis speed: 30 m/min
INSTALLATION
Installed power: 62–82 KVA
Compressed air requirement: 400 NL/min
Extraction air requirement: 4,430 m³/h
Extraction air velocity: 25 m/s
Extraction port diameter: 250 mm
GENERAL FEATURES
CNC-controlled drilling and milling center in gantry design with worktable and workpiece supports suitable for:
- Vertical drilling on panel surfaces
- Horizontal drilling on all four workpiece edges
- Grooving with disc cutter
- General milling operations (3-4-5 axes)
MACHINE STRUCTURE
Nodpfjy Dta Sjx Abzewh
The base structure is a monolithic construction made of thick-walled steel, reinforced throughout the entire machine bed for extreme rigidity and stability through welded-in reinforcements. The table design with a large base is the key to ensuring permanent precision and stability. The machine layout offers the operator an optimal workflow with a minimal footprint. The moving gantry is built from a solid monoblock and is guided on prism-ground rails with ball-bearing carriages in the X-axis. The mobile unit carries the operating unit, which is also mounted on prism-ground rails and ball-bearing guides.
AXIS MOVEMENT
All axes move on large-cross-section linear prism guides with wide-bearing ball-bearing shoes to ensure optimal gliding even at the highest speeds and accelerations. The precise and fast positioning of the moving gantry (X-axis) is achieved via rack and pinion with helical teeth. Large-diameter ball screws ensure accurate positioning of the working unit along the moving gantry (Y and Z axes).
MOTORS, DRIVES, AND INVERTERS
Perfect mechanical dynamics and maximum positioning accuracy are achieved with high-quality drives and brushless motors, sized for speeds up to 90 m/min, ensuring the best possible surface finish.
CONTROL SYSTEM
The control unit consists of a numerical controller for milling and drilling with "Xilog Maestro" graphic interface on a Windows 7-based Office operating system:
- 17" color LCD screen
- QWERTY keyboard
- Swiveling operator panel
- Machine operation interface with Xilog Maestro software
Xilog Maestro Features:
Programming
- Parametric graphical programming
- Import of DXF files (2D; geometries like "SPLINE", "POLYLINE 3D", straight or circular interpolation in three axes, linear in space, spiral in the chosen plane)
- Supported programming with graphical and syntax aids for drilling and milling operations
- Automatic optimization of drilling operations and tool change cycles
- Option to shift panel zero-point for drilling on slanted or curved panel edges
Mažas skelbimas
Nattheim
1 177 km
CNC apdirbimo centras
SCMTech Z 27 C
Skambinti
Būklė: naudotas, Gamybos metai: 2006, · Working area: 2,650 x 1,240 mm
· Travel range X-Y: 2,995 x 1,385 mm
· Z-axis travel length: 200 mm
· Clearance height: 180 mm
C-axis deactivated - 3-axis machine
The basic frame is a monolithic design made of thick-walled steel. It is reinforced along the entire machine bed with welded-in triangular plates, ensuring extreme stability. The triangle shape with a wide base, used for the load-bearing parts, is the secret to long-term precision and stability.
The machine layout allows the operator to achieve an optimal workflow while requiring minimal floor space. This base frame provides the machining unit with a balanced and secure foundation, ensuring particularly good load distribution.
The mobile carriage is constructed as a solid monoblock. It moves in the X-axis on prismatically ground guides with recirculating ball carriages. The machining unit is mounted on this mobile carriage, again running on prismatically ground guides and recirculating ball carriages.
Description of aggregates and accessories (basic)
Drilling unit:
Drill head with 12 + 6 spindles
· 7 individually selectable vertical spindles in X
· 5 individually selectable vertical spindles in Y
· 4 horizontal spindles in X (2+2)
· 2 horizontal spindles in Y (1+1)
Nwodpfx Aox Twccebzsh
· Speed: 4,000 rpm
· Power: 2.2 kW
· Matrix: 32 mm
· Drill mount: M 10 with 11 mm centering
Grooving saw unit in X
· Integrated in the drill head
· Grooving saw blade with diameter up to max. 120 mm
Main milling unit (Position 2):
· Tool holder HSK 63F
· Speed: 1,500 – 24,000 rpm, stepless via inverter
· Motor power: 4.4 kW (6 HP) from 12,000 rpm (S1)
· Motor power: 6.6 kW (9 HP) from 12,000 rpm (S6)
· Right/left rotation
· Ceramic bearings
· Scope of delivery: 4 pcs. tool holders (right), without collet
Tool changer R8L
Automatic tool changing device for 8 tools. Mounted on the rear carriage for quick access to the tools.
· Number of tool positions: 8
· Max. tool diameter: 120 mm
· Max. weight per tool: 4.5 kg
· Max. total weight of all tools: 22 kg
· Holder for 1 angle gear
· Moves along X
Horizontal milling unit (Position 1)
Horizontal unit with two opposed outputs for milling and grooving.
· Speed: 9,000 – 18,000 rpm, stepless via inverter
· 1 output for collet 3-20 mm (ER 32)
· 1 output for saw/collet 3-12 mm (ER20) (for saw D=120 mm / bore 50 mm)
· Motor power: 3 kW (4 HP)
· Max. tool diameter front milling: 20 mm
· Max. tool length front milling: 110 mm
· Max. tool diameter rear milling: 12 mm
· Max. tool length rear milling: 80 mm
· Max. saw blade diameter: 100 mm
· Saw blade bore (ER 32): 50 mm
· Saw blade arbor diameter (ER 20): 12 mm
Worktable
The worktable is designed to guarantee the operator maximum freedom of movement. The quick vacuum clamping system ensures maximum flexibility, precise positioning, and optimal holding of the workpieces.
· 6 supports, 1,000 mm, infinitely adjustable pneumatically in X
· 12 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 pcs. per support)
· 2 stops in X (1 left / 1 right)
· 1 stop in Y per support (total 6 pcs.)
· The retractable reference stops are controlled via CNC
· Standard pendulum operation (2 working areas)
--- other clamping systems available as options ---
Axis movement
The drive system in X, Y, and Z is via precision-ground recirculating ball screws.
Mažas skelbimas
Nattheim
1 177 km
CNC apdirbimo centras (5 ašių)
MorbidelliP 200
Skambinti
Būklė: naudotas, Gamybos metai: 2018, Delivery time approx. 5 months Machine from educational use – excellent condition, low hours (edging unit unused). Supplied without tools. Additional costs for disassembly / shipping / assembly and commissioning / training. Includes Maestro 3D and Pro View.
Nwedpfx Abjyuw Srozjh
MORBIDELLI P200
Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm
Edge banding – Made for You
This CNC machining center is equipped with a comprehensive range of edge banding tools to meet every requirement in wood processing.
MAIN ADVANTAGES
- High performance, featuring the advanced H80C edge banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology with over 1,000 maintenance-free operating hours.
- Better equipped: Suction cups can be configured using the FLEX table system for optimal machine setup according to requirements.
- Easier and more intuitive programming thanks to the integrated CAD/CAM module for edge banding technology (MAESTRO EDGE).
- User-friendly: The lowered frame allows unrestricted access to the working table at any time; the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are required.
Base Structure:
The fundamental structure is a monolithic, thick-walled steel construction, reinforced across the entire machine bed with welded box sections for exceptional stability. The specially designed, wide-base machine bed ensures lasting precision and rigidity. The supporting structure consists of a robust monolithic steel pedestal with heavy ribbing for maximum stiffness; the especially broad base is designed to provide machine stability, ensuring continuous precision regardless of working conditions, with no need to anchor the machine to the floor. The pedestal offers a large, solid foundation for the movable gantry: the work unit benefits from a balanced, stable, and resilient support able to withstand maximum loads, resulting in higher-quality performance and greater accuracy.
The movable gantry is a solid single component fixed to the base, running on high-quality prism guides with recirculating ball carriages. The working unit is mounted on this gantry and travels in Y and Z axes via prism guides with recirculating ball carriages.
Movement of the lower movable unit (X-axis) and the working unit along the gantry’s Y-axis is achieved via helical rack-and-pinion drive, delivering greater tooth engagement for higher acceleration and increased speed on X and Y axes. The custom-engineered helical gearing minimizes wear on mechanical components and ensures quieter operation.
Vertical Z-axis movement is driven by a recirculating ball screw, providing perfect balance under dynamic loads and supporting rapid acceleration and deceleration. The main milling unit is directly attached to the Z-axis carriage, guaranteeing maximum precision in machining operations.
Mažas skelbimas
Borken
1 181 km
Lazerinė sistema su standartiniu kojiniu jungikliu
IridexOcuLight SLx mit Endosonde
Skambinti
Būklė: labai geros būklės (naudotas), We are offering you an Iridex OcuLight SLx laser system.
Laser: IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser
Description:
- Designed for durability, featuring a thermal management system to increase the efficiency and reliability of laser conversion
- Enhanced user interface with conveniently arranged, clearly understandable controls
- Enables easy transportation between rooms and offices
- Tri-Mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse
- Highly ergonomic user interface, infrared wavelength, and a wide range of delivery systems provide a comprehensive range of treatment options
- Well suited for retinopathy of prematurity and end-stage glaucoma
- CW-Pulse mode delivers energy in single or repeated exposures
- LongPulse mode delivers laser energy over longer intervals
- MicroPulse mode delivers laser energy in a sequence of short pulses for precise thermal effect control
Features:
- Application area: Ophthalmic
- Gain medium: Solid-state
- Ergonomics: Desktop unit
- Wavelength: 810 nm
Nodpfx Aszd Uubobzewh
- Treatment laser output: Infrared diode laser 810 nm, 0–3000 mW
- Aiming laser output: Red diode laser 650–670 nm, 0 to
Mažas skelbimas
Borken
1 181 km
Lazerinė sistema
IridexOcuLight TX
Skambinti
Būklė: labai geros būklės (naudotas), Here we offer you an Iridex Laser System OcuLight TX.
IRIDEX OcuLight TX Green 2.5 W 532 nm laser system, main console including foot pedal, key, cables
The OcuLight TX solid-state laser systems emit genuine green continuous-wave laser light (532 nm) for ophthalmological applications. The OcuLight TX and GLx models are also indicated for otolaryngological applications. Improper use of the laser system may result in undesirable side effects.
OcuLight TX
Ophthalmology:
- Retinal photocoagulation
- Laser trabeculoplasty
- Iridotomy
- Iridoplasty
Otolaryngology:
- Stapedectomy
- Stapedotomy
IRIDEX OcuLight TX Green 532 nm Laser
Outstanding efficiency with up to 2500 mW of deliverable laser energy provides pulse durations and intervals from 10 to 3000 ms.
Offers TrueCW laser pulses for maximum control and precision.
Flexible selection of delivery devices and a wide range of handpieces for different surgical procedures.
Optional remote control and wireless footswitch help reduce clutter and enhance ergonomics and control.
Quiet operation eliminates distractions.
Lightweight, portable design makes transport between treatment rooms and offices easy.
IRIDEX OcuLight TX Green 532 nm Laser
- Green treatment laser: 532 nm
- Target laser: nominal 632 nm
- Cooling: On-demand whisper fan
Nedpjzd Ut Refx Abzewh
- 10–3000 ms exposure time and repeat interval
- Compatible with EndoProbe, LIO, OtoProbe, and SLA
- Output power: EndoProbe 0–2000 mW, LIO 0–2000 mW, OtoProbe 0–2500 mW, SLA 0–1800 mW
- Weight: 6.4 kg
- Length: 15 mm
- Width: 30 mm
- Height: 30 mm
- Type: IRIDEX OcuLight TX
- Condition: used
- Scope of delivery: (see picture)
(Specifications and details subject to change and errors reserved!)
If you have any further questions, we are happy to answer them by phone.
Mažas skelbimas
Borken
1 181 km
Druskos purškimo kamera
KöhlerHK500
Skambinti
Būklė: labai geros būklės (naudotas), Here we offer you a Köhler salt spray chamber.
Salt spray chambers:
Nedozd Umkspfx Abzewh
- Versatile testing capabilities from salt spray tests to fully automatic cyclic tests
- Easy operation via graphical menu navigation
- Custom configurations for a wide range of applications
- Simple operation via touch panel
Internal dimensions (W x D x H, without hood): 1080 x 675 x 580 mm
External dimensions (W x D x H): 1940 x 900 x 1220 mm
Test chamber volume: 500 liters
Chamber temperature: Ambient +5 to 60°C
Humidifier temperature: Ambient +5 to 75°C
Power supply: 230V, 1-phase, 50/60Hz, 2000W
Compressed air: 4.5 – 8.0 bar / 3 Nm³/h
Brine tank capacity: 140 liters
Construction: Stainless steel
Fully overhauled and retrofitted with Comfort control system
- Replacement of all electrical components
- Replacement of all hose connections
Type: HK 500
Weight: 400 kg
Condition: Used
Scope of delivery: (See image)
(Specifications subject to change or error!)
Feel free to contact us by phone for any further questions.
Mažas skelbimas
Borken
1 181 km
6 ašių robotas
DensoVS-068
Skambinti
Būklė: labai geros būklės (naudotas), Denso Industrial Robot with Denso Controller
We offer here a Denso industrial robot complete with Denso controller.
Industries and Applications
The VS-068 series provides high speed and performance in a compact, slim housing. In addition, numerous options are available that enable operation in a wide range of environments. Thanks to its high-speed performance, accuracy, and the wide selection of options available, the VS-068 can be deployed in almost any sector, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tools, medical devices and pharmaceuticals, plastics, and metal industries.
The robot model is suitable for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications.
Denso 6-Axis Robot VS-068 with Denso Robot Controller 410200-2611
The compact model delivers exceptional performance and speed.
Robot Model: VS068A4-AV6-C3N-ANNDN-NNNN
Arm Reach: 710 mm
Payload: 7.0 kg
Cycle time: 0.31 sec
Repeatability: ±0.02 mm
Weight: 49 kg
Year of manufacture: 2016
Type: Denso 6-axis robot VS-068 / Controller 410200-2611
Condition: used
Included in delivery: (See photo)
Nwjdozd Ucfepfx Abzeh
(Specifications are subject to change and errors excepted!)
Should you have any further questions, we are happy to assist by phone.
Mažas skelbimas
Borken
1 181 km
6 ašių robotas
DensoVS-068
Skambinti
Būklė: labai geros būklės (naudotas), Denso Industrial Robot with Denso Controller
Nwjdpjzd Ub Uefx Abzoh
We offer here a Denso industrial robot complete with Denso controller.
Industries and Applications
The VS-068 series provides high speed and performance in a compact, slim housing. In addition, numerous options are available that enable operation in a wide range of environments. Thanks to its high-speed performance, accuracy, and the wide selection of options available, the VS-068 can be deployed in almost any sector, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tools, medical devices and pharmaceuticals, plastics, and metal industries.
The robot model is suitable for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications.
Denso 6-Axis Robot VS-068 with Denso Robot Controller 410200-2611
The compact model delivers exceptional performance and speed.
Robot Model: VS068A4-AV6-C3N-ANNDN-NNNN
Arm Reach: 710 mm
Payload: 7.0 kg
Cycle time: 0.31 sec
Repeatability: ±0.02 mm
Weight: 49 kg
Year of manufacture: 2016
Type: Denso 6-axis robot VS-068 / Controller 410200-2611
Condition: used
Included in delivery: (See photo)
(Specifications are subject to change and errors excepted!)
Should you have any further questions, we are happy to assist by phone.
Mažas skelbimas
Borken
1 181 km
6 ašių robotas
DensoVS-068
Skambinti
Būklė: labai geros būklės (naudotas), Denso Industrial Robot with Denso Controller
We offer here a Denso industrial robot complete with Denso controller.
Industries and Applications
The VS-068 series provides high speed and performance in a compact, slim housing. In addition, numerous options are available that enable operation in a wide range of environments. Thanks to its high-speed performance, accuracy, and the wide selection of options available, the VS-068 can be deployed in almost any sector, including the automotive, chemical, consumer goods, electronics, food, greenhouse, machine tools, medical devices and pharmaceuticals, plastics, and metal industries.
The robot model is suitable for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications.
Denso 6-Axis Robot VS-068 with Denso Robot Controller 410200-2611
The compact model delivers exceptional performance and speed.
Robot Model: VS068A4-AV6-C3N-ANNDN-NNNN
Arm Reach: 710 mm
Payload: 7.0 kg
Cycle time: 0.31 sec
Repeatability: ±0.02 mm
Weight: 49 kg
Year of manufacture: 2016
Nedpfszd Ub Isx Abzjwh
Type: Denso 6-axis robot VS-068 / Controller 410200-2611
Condition: used
Included in delivery: (See photo)
(Specifications are subject to change and errors excepted!)
Should you have any further questions, we are happy to assist by phone.
Mažas skelbimas
Borken
1 181 km
6 ašių robotas
DensoVS-087
Skambinti
Būklė: labai geros būklės (naudotas), Denso
Type: Denso 6-Axis Robot VS-087 / Controller 410200-2611
A VS087-AV6-C3N features a cleanroom class 3 protection rating specification.
Denso industrial robot with Denso controller.
Industries and Applications
The VS-087 series offers high speed and high performance in a compact, streamlined housing.
In addition, various options are available to enable operation in a wide range of environments.
Thanks to its high-speed performance, accuracy, and the variety of available options, the VS-087 can be used in nearly all sectors, including automotive, chemical, consumer goods, electronics, food, greenhouse, machine tools, medical devices and pharmaceutical, plastics, and metal industries.
This robot model is suitable for assembly, inspection, alignment, material handling, tending, packaging, palletizing, and custom applications.
Denso 6-Axis Robot VS-087 with Denso Robot Controller 410200-2611
This compact model stands out for its outstanding performance and speed.
Robot model: VS-087A4-AV6-C3N-ANNDN-NNNN
Arm reach: 905 mm
Payload: 7.0 kg
Cycle time: 0.34 sec
Repeatability: ±0.03 mm
Weight: 51 kg
Year of manufacture: 2016
Condition: used
Scope of delivery: (See photo)
Nwjdpfxszd Ubzo Abzsh
(Subject to changes and errors in technical specifications and details!)
For further questions, feel free to contact us by phone.
Mažas skelbimas
Borken
1 181 km
SLA spausdintuvas
3D systemsiPro 8000
Skambinti
Būklė: labai geros būklės (naudotas), 3D Systems
We offer you a 3D printer here.
Solid-State Nd:YVO4 laser with third harmonic generation
Wavelength: 354.7nm
Rated power at laser head: 1450 mW (1000 mW at the resin surface under standard conditions)
Zaphyr™ Coating System:
Process: Interchangeable coater
Adjustment: Self-leveling and self-correcting
Build layer thickness: Minimum 0.05mm, Maximum 0.15mm
ProScan™ Scanner
Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm
Wide line detection nominal: 0.76mm
Maximum drawing speed
Edge detection: 3.5 m/sec
Wide line detection: 25 m/sec
Build volume capacity:
RDM 750F: 650mm x 750mm x 550mm; 414 l
Maximum part weight: 75kg
Power supply: 200-240VAC (alternating current), 50/60Hz single phase, 30A
Ambient conditions
Temperature range: 20-26°C
Max. permitted fluctuation: 1°C per hour
Relative humidity: 20-50%, non-condensing
Space requirements:
Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm
Weight packed (without RDM): 1590kg
Type: iPro 8000
Condition: used
Scope of delivery: (See images)
Nwjdpfx Ajzd Tt Asbzeh
(Technical data subject to change and errors excepted!)
Further questions can be answered by phone at any time.
Mažas skelbimas
Wolkowo
589 km
Skaitmeninė spausdinimo mašina
InkcupsHELIX
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, rašalo kasečių skaičius: 5, spalvų kanalai: 5, spausdinimo galvučių skaičius: 5, rezoliucija (maks.): 1 200 DPI (taškų colyje), bendras ilgis: 305 mm, bendras plotis: 114 mm, bendras aukštis: 114 mm, vietos reikalavimas ilgis: 23 100 mm, reikalingas plotis: 6 400 mm, reikalingas aukštis: 16 800 mm, paskutinio kapitalinio remonto metai: 2024, įvesties srovės tipas: trifazis, įėjimo įtampa: 230 V, Įranga: automatinis dvikryptis spausdinimas, bukletų užbaigėjas, rasterinio vaizdo procesorius, The Helix® digital cylindrical printer is designed for high-quality, full-color image printing (CMYKWW + varnish) on straight and conical cylinders. Fast and versatile, this cylindrical printing machine is ideal for applications in the beverage industry, barware, candles, and industrial printing.
Nwsdpfx Ajvncilobzoh
The Helix® UV cylindrical printer achieves an optimal balance between speed and image quality thanks to its patented Helix® software, which precisely places 7-picoliter ink drops along the cylinder at extremely high speed. This robust, state-of-the-art machine is designed and built in the USA. The Helix® features a wide frame that allows easy access and maintenance, as well as an illuminated interior to further simplify servicing.
The machine has also been fitted with an additional 80 mm UV lamp, which has increased the maximum print height to 190 mm. We successfully print on metal thermoses, glass, and plastic bottles. Ink configuration: CMYKWVV.
The machine is in very good condition both visually and technically, and it is still in continuous operation.
Viewing and demonstration of the machine is possible.
Mažas skelbimas
Stary Sącz
662 km
Pusiau automatinis magnetų ir plokštelių aplikatorius
PERONI RUGGEROMAG-1
Skambinti
Būklė: naudotas, Gamybos metai: 2022, MAG 1 Peroni Ruggero is a modern, semi-automatic machine designed for manufacturers of premium packaging, magnetic boxes, and luxury cardboard covers. The device combines several operations in a single working cycle, significantly increasing production efficiency and ensuring the highest precision of workmanship.
The machine mills recesses in solid board, automatically applies hot-melt adhesive, and inserts magnets or metal plates in pre-prepared positions. This ensures the entire process is fast, repeatable, and requires minimal operator involvement.
Material is loaded manually, while all key production stages are carried out automatically. An advanced positioning system guarantees precise placement of components, resulting in high-quality finished products and aesthetically refined packaging.
MAG 1 allows the application of 1 to 6 magnets or metal plates on one side of the cover in a single work cycle, providing great production flexibility and the ability to execute a wide range of projects.
The machine has seen very limited use and is in excellent technical and visual condition, ready for immediate deployment in a production facility.
Key Benefits
- Milling, gluing, and magnet application in a single working cycle
- Capability to handle 1 to 6 magnets or metal plates simultaneously
- High process precision and repeatability
- Dedicated to the production of magnetic boxes and premium packaging
- Automatic hot-melt adhesive application
- High throughput with minimal operator intervention
- Excellent technical and visual condition
- Year of manufacture: 2022
Technical Data
Manufacturer: PERONI RUGGERO
Model: MAG 1
Year of manufacture: 2022
Serial number: 007
Supported materials
- Solid board (grey) thickness from 1.5 to 4 mm
- Magnets with diameter from 9.5 to 15 mm
- Magnet thickness: 1 mm, 1.5 mm, or 2 mm
Workpiece range
- Minimum width: 180 mm
- Maximum width: 1550 mm
Performance
- Up to 14 cycles/min when applying 1 magnet
- Up to 8 cycles/min when applying 2 magnets
Technical parameters
- Power: 5 kW
- Compressed air consumption: 150 NL/min at 6 bar
Machine dimensions
Nodjzbtpgopfx Abzowh
- Length: 2500 mm
- Width: 2500 mm
MAG 1 is the perfect solution for premium packaging manufacturers looking to automate the magnet application process, improve production efficiency, and achieve the highest quality of finished products.
Mažas skelbimas
Stary Sącz
662 km
Kietų dėžių klijavimo linija
PERONI RUGGEROLINEA BOX WRAPPER 24
Skambinti
Būklė: naudotas, Gamybos metai: 2022, The LINEA BOX WRAPPER 24 by Peroni Ruggero is a modern, fully automatic line for wrapping rigid boxes. This solution is designed for premium packaging manufacturers who demand precision, repeatability, and fast order execution with minimal setup times.
The machine enables the production of a wide range of box formats, maintaining excellent wrapping quality even for demanding projects. An automatic paper feeder and an advanced glue application system with viscosity control ensure a stable and reliable process.
The operator places the box on the paper sheet, and a mechanical centering system supported by sensors and drives precisely positions all elements before further processing. The materials are then automatically transported to the wrapping module, where the entire process is fully automatic. Finished products are collected by a Pick & Place system and transferred to the outfeed section.
An additional advantage is the quick die change system, which minimizes production downtime. Dies tailored to specific box sizes can be made of wood and mounted within just a few minutes.
The machine has been used only occasionally, so it is in excellent technical and visual condition, ready for immediate deployment.
Key benefits:
- Automatic production of high-quality rigid boxes
- Handles boxes up to 240 mm in height
- High positioning and wrapping precision
- Automatic glue viscosity control
- Short setup time – around 3 minutes
- Output up to 350 finished boxes per hour
- Reliable Pick & Place collection system
- Excellent technical condition – year of manufacture 2022
Technical specifications:
Manufacturer: PERONI RUGGERO
Model: LINEA BOX WRAPPER 24
Year of manufacture: 2022
Serial number: 011
Paper format and grammage:
Maximum sheet size: 700 × 1000 mm
Paper weight: 110–150 g/m²
Box dimensions:
Minimum internal size: 50 × 50 mm
Maximum external size: 500 × 500 mm
Box height: 20–240 mm
Nwjdpfezbthvsx Abzeh
Performance:
Automatic format changeover: approx. 3 minutes
Mechanical speed: up to 500 cycles/h
Production output: up to 350 boxes/h
Mažas skelbimas
Volkach
1 095 km
Horizon ST-20R
HorizonST-20R
Skambinti
Būklė: naudotas, HORIZON pile lowerator table / right-hand delivery, ST-20R, used
The Horizon ST-20R pile lowerator table stands out due to its special right-hand delivery feature, providing an efficient solution for stacking and sorting printed products.
With its versatile stacking options—either flat or staggered—it allows flexible handling of various print jobs.
Key Features:
- Right-hand Delivery:
The "R" in ST-20R stands for right-hand delivery, which differentiates this model. The right-side output enables optimal adaptation to specific room layouts and production workflows.
- Compatibility:
The ST-20 is compatible with a wide range of Horizon models, including MC-80a, VAC-100a, VAC-60Ha, VAC-1000, and VAC-600. This simplifies integration into existing production lines.
- Versatile Stacking Options:
The ST-20 enables both flat and offset stacking, enhancing adaptability to different print jobs.
- Large Stack Height:
With a maximum pile height of 320 mm, the ST-20 can accommodate a considerable amount of printed material, reducing the need for frequent unloading and boosting efficiency.
- Precise Stacking:
The ST-20 provides precise and neat stacking, ensuring the quality of finished products and minimizing rework.
Specifications:
Nodpoxwk Rrsfx Abzowh
- Maximum sheet size: 450 x 310 mm
- Minimum sheet size: 185 x 128 mm
- Maximum pile height: 320 mm
- Dimensions: 652 x 550 mm
- Weight: 62 kg
All-Inclusive Package
We handle everything: from secure packaging and transport to customs clearance. Upon request, we can also offer you a tailored leasing proposal.
Sustainable and Cost-effective
Opt for a used machine and benefit twice: protect the environment and your budget. Despite possible signs of use, you will receive a quality product at an attractive price.
Mažas skelbimas
Katowice
637 km
Stiklo šlifavimo staklės
Bottero110 FC
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GG11OC-11407, bendras ilgis: 8 100 mm, bendras plotis: 1 400 mm, bendras aukštis: 2 700 mm, bendras svoris: 3 390 kg, For sale: Professional Bottero 110 FC glass edge grinding and polishing machine, designed for straight-line grinding and polishing of flat glass edges. This machine is ideal for glass processing plants, glassworks, as well as producers of glass components for furniture, doors, balustrades, and shopfronts.
Nwjdpfxeyr Ax Es Abzjh
Technical specifications:
- Number of grinding wheels: 10
- Glass thickness: 3–50 mm
- Minimum glass size: approx. 40 × 40 mm
- Feed speed: 0.6–6 m/min
- Installed power: approx. 27.5 kVA
- Machine weight: 3390 kg
- Approximate dimensions: 8100 × 1400 × (H) 2700 mm
Applications:
- Grinding of straight glass edges
- Polishing of cut edges
- Creation of bevels (e.g., 45° bevels)
- Preparation of glass for further processing (tempering, laminating, assembly)
The machine is manufactured by the renowned Italian brand Bottero, known for its durable and reliable solutions for the glass industry. Its advantages include easy access to service and a wide availability of spare parts on the market.
If you have any questions, please feel free to contact me.
Mažas skelbimas
Kölleda
952 km
Plėvelės vyniojimo mašina, susitraukimo sistema
KUPERKFE-STANDARD 2100/250
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: K500-50739, bendras ilgis: 14 000 mm, bendras aukštis: 2 500 mm, bendras plotis: 3 600 mm, įvesties srovės tipas: trifazis, produkto aukštis (maks.): 100 mm, gaminio aukštis (min.): 30 mm, gaminio ilgis (min.): 500 mm, gaminio ilgis (maks.): 1 800 mm, gaminio plotis (maks.): 1 500 mm, gaminio plotis (min.): 600 mm, įėjimo įtampa: 400 V, suslėgto oro jungtis: 6 juosta, įėjimo srovė: 33 A, darbinio aukščio: 900 mm, praėjimo aukštis: 250 mm, stalo plotis: 1 700 mm, stalo ilgis: 2 000 mm, paskutinio kapitalinio remonto metai: 2022, ruošinio svoris (maks.): 100 kg, Įranga: dokumentacija / vadovas, Overall machine dimensions:
Width: 3,600 mm
Length: 10,600 mm (excluding feed and discharge area)
Height: 2,500 mm
Working height: 900 + 50 mm
Feed rate: 13 - 23 m/min (frequency-controlled)
Characteristics of PE shrink flat film
• Shrink film suitable for shrink wrapping process. (Top and bottom film must be sealable on the sides in the tunnel.)
• Biaxial shrinkage: approx. 50-60% longitudinal, approx. 40-50% transverse
• Antistatic treated.
• Shrink film with needle perforation improves the shrink process and features higher gas and water vapor permeability.
Shrink film to be used
• Biaxially shrinkable, needle-perforated.
• Wound tightly and with clean edges on rolls.
Film thickness: Application: approx. 40 – 60 μm.
Film widths: Application: 800 mm, 1100 mm, 2000 mm
Roll outer diameter: max. 350 mm
Core outer diameter: min. 90 mm
Lower film calculation: Pack width + 200-250 mm
Nsdpfjvvlyiox Abzewh
Upper film calculation: Pack width + (2 x height) + 200-250 mm
Technical component data:
Conveyor belts:
Infeed conveyor belt (W x L): 1,700 x 2,000 mm / Feed rate: 13 – 23 m/min.
Roller conveyor after tunnel (W x L): 1,700 x 2,000 mm / Feed rate: 13 – 23 m/min.
KFE Standard film wrapping machine:
Max. film roll width, top and bottom: 2,100 mm / Package height (clearance height): max. 250 mm / Max. film roll diameter: 350 mm
Film thickness: approx. 40-60 μm PE film, good quality / Weight: approx. 3,100 kg
Side sealing:
Sealing bar length: 1,850 mm / Adjustment range: 500 – 1,600 mm / Feed rate, adjustable: 13 – 23 m/min.
Shrink tunnel ST/II -1800-3000-300:
Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm
Feed rate, adjustable: 6 – 23 m/min.
Machine can be inspected at production site.
Mažas skelbimas
Hradec Králové
775 km
Vakuuminė mėsos maišyklė "Laska ME2000
LASKAME 2000
Skambinti
Būklė: naudotas, Used Laska vacuum meat mixer, model ME2000, with a working volume of approx. 1600 liters and a total volume of 2000 liters. The stainless steel mixing trough is approx. 2000 mm long x 1000 mm wide x 1000 mm maximum depth and is covered by two hydraulically liftable lids. Two shafts with mixing paddles are driven by an electric motor. There are two side discharge openings with hydraulically operated hinged covers. The unit includes an electrical control cabinet with power components and a control panel. Also included is a Laska lifting column for loading material in stainless steel bins.
Nwsdem Amctepfx Abzjh
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Drachten
1 181 km
Dviejų pusių obliavimo staklės 400 mm
RHINO EXTEND LIGHT400SI
Skambinti
Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Two-Sided Wide Planer
Maximum planing width: 400 mm
Maximum planing height: 200 mm
Heavy-duty cardan feed
Feed belt with spike profile ensures precision feed accuracy, especially with warped or bent timber.
Electronic height adjustment
Nwedpfxezdpcms Abzeh
Spiral cutter heads (top and bottom)
Latest IE-3 motors
Braked motors and feed
CE certified
Mažas skelbimas
Borken
1 181 km
3D spausdintuvas
ProJet 3000 HD
Skambinti
Būklė: labai geros būklės (naudotas), ProJet 3000 HD 3D Printer
We are offering you an untested ProJet 3D printer.
The ProJet™ HD 3000 prints precise plastic parts for use in functional testing, as communication models, for rapid manufacturing, rapid tooling, and other applications.
With features such as a wide range of materials, various resolution modes, and user-friendly operation, these office-friendly 3D printers accelerate and maximize your return on investment (ROI).
Printing Modes:
HD – High Definition
UHD – Ultra High Definition
Net Build Volume (xyz):
HD Mode: 298 x 185 x 203 mm
UHD Mode: 127 x 178 x 152 mm
XHD Mode: n/a
Resolution:
HD Mode: 375 x 375 x 790 DPI (xyz); 32μ layer thickness
UHD Mode: 750 x 750 x 890 DPI (xyz); 29μ layer thickness
XHD Mode: n/a
Accuracy (typical): 0.1 – 0.2% of part dimension. Accuracy depends on build parameters, part geometry, part placement, and post-processing settings.
Email Notification: No
Build Materials:
Nwedpfxezdnnuj Abzsh
VisiJet® EX200: Build material, durable rigid plastic
VisiJet® SR200: Economical multipurpose material. Available in natural, blue, or gray
VisiJet® HR200: Available in blue, specially developed for investment casting applications
Support Material:
VisiJet® S100: Support material, non-toxic wax for hands-free support removal by melting
Power Supply: 100–127 VAC, 50/60 Hz, single phase, 15A
Dimensions (LxWxH) Printer without packaging: 737 x 1215 x 1504 mm
Weight: Printer without packaging: 254 kg
ProJet Accelerator Software:
Easy job setup, template and queue management
Automatic part placement and processing optimization tools
Comprehensive part file editing tools
Automatic support generation
Job statistics
Network Compatibility: 10/100 Ethernet interface
Hardware Requirements: 1.8 GHz with 1 GB RAM (Open GL support, 64 MB video RAM) or higher
Operating System: Windows XP Professional, Windows Vista, Windows 7
Supported File Formats: STL and SLC
Ambient Temperature: 18–28°C
Noise Level:
Mažas skelbimas
Siedlce
352 km
Juostinis pjūklas
CORMAKHBS275
Skambinti
Būklė: naujas, Gamybos metai: 2026, CORMAK HBS275 Band Saw for cutting pipes, profiles, and bars is widely used in all locksmith workshops where precision, quality, and cutting speed are essential. The model is equipped with a swivel arm ranging from 0-60°, and the saw guides are based on carbide inserts. The frame construction ensures precise and quiet operation.
Machine Features
This horizontal metal band saw with a swiveling arm enables cutting on a plane perpendicular to the axis of the material as well as at any angle from 0 to 60°. The workpiece can be manually fed or handled by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide pads and bearings, significantly improving blade guidance, service life, straightness, accuracy, and cut quality. Carbide guidance greatly reduces wear on both the machine and the saw blade. The machine features an efficient coolant pump with a closed-circuit coolant system.
The arm of the saw is made from a single cast iron piece, and together with the 27 mm-wide cutting blade, allows for full serial cutting of both profiles and solid materials. The vise is mounted on an adjustable bed and is fitted with a quick-release clamp. The blade guides are outfitted with hard metal — carbide inserts — and a rolling bearing system. These CARBIDE INSERT GUIDES are responsible for the precision and straightness of the cut.
The cast iron work table, fixed to the base, comes with a swivel arm and a separate control panel. During the cutting process, the primary cutting movement is the movement of the cutting blade, while the arm descends as the feed stroke. The descending speed of the arm (cutting speed) is regulated using a hydraulic cylinder.
Feed speed is adjusted on the saw’s control panel. You can select between two blade speeds: 37.5 or 75 m/min. Once the arm reaches its lowest position (after cutting the workpiece), the saw blade drive switches off automatically. Safety is ensured by blade covers and micro-switches that stop the motor at the end of the cutting cycle or when any guard is opened. Additional protection includes automatic shut-off of the saw if the blade breaks.
The machine is powered by a worm gear motor.
The motor with a thermal fuse protects against overheating during operation.
Nwedoudi Unepfx Abzsh
Technical Data:
TOTAL POWER: 1.5 kW
POWER SUPPLY: 400V 50Hz
ARM DESCENT CONTROL: hydraulic cylinder
BLADE DIMENSIONS: 2450 x 27 x 0.9 mm
BLADE SPEED: 37.5 / 75 m/min
VISE BASE HEIGHT: 900 mm
MACHINE DIMENSIONS (ARM RAISED) (L x W x H): 1720 x 800 x 1800 mm
WEIGHT: 215 kg
Cutting Capacity (Diameter / Dimensions in mm):
ANGLE ROUND RECTANGLE SQUARE
0° ø220 260 x 140 200 x 200
45° R ø160 160 x 140 160 x 160
60° R ø100 120 x 100 100 x 100
Price does not apply to machines purchased in Poland.
Mažas skelbimas
Wolica Druga
500 km
Juostinis pjūklas
MEBERSR 900
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 460 mm, pjovimo plotis (maks.): 330 mm, valdymo tipas: vadovas, pavaros tipas: elektrinis, bendras aukštis: 1 750 mm, bendras ilgis: 2 900 mm, bendras plotis: 1 100 mm, bendras svoris: 900 kg, Įranga: CE žymėjimas, MEBER SR 900 Band Saw for Lamella and Lumber Cutting!
Professional band saw designed for precise cutting of wood and large-size elements. The machine has undergone a technical inspection and is in very good condition—ready for immediate operation. The machine is in perfect condition after review.
TECHNICAL SPECIFICATIONS:
- Maximum cutting height: 460 mm
- Cutting height with feed: 240 mm
- Maximum cutting width: 680 mm
- Cutting width with feed: 130 mm
- Maximum workpiece width: 330 mm
- Maximum blade width: 80 mm
- Table height from base: 1000 mm
- Table dimensions: 970 × 810 mm
- Adjustable table angle: yes
- Double-sided blade guidance
- Feed rates (10 speeds):
2.5 / 4 / 5 / 7 / 8 / 12 / 14 / 19 / 24 / 38 m/min
- Motor power: 5.5 kW
Machine dimensions:
- Length: 2900 mm
- Width: 1100 mm
- Height: 1750 mm
Nwjdpfx Ajy Uc H Nsbzeh
- Weight: 900 kg
Robust and efficient band saw for carpentry and production applications. The large cutting height and width enable processing of heavy-duty components. The adjustable table and wide range of feed rates allow you to adapt working parameters to different types of wood and production requirements. Double-sided blade guidance ensures high cutting accuracy and stability.
Tel: 664 335 465
Tel: 530 632 386
jbsmaszyny.pl
Palengviname jums paiešką: "widia th10k10"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo



























































































































































































































































