Vicon Extra 332 pirkti naudotą (6 063)

Būklė: naudotas, Gamybos metai: 2005, Demag extra 50-200 Csdpsyypm Tefx Aa Deha

Būklė: naudotas, Gamybos metai: 2015, Pagaminimo metai: 2015 m. sausis Chjdex T Afijpfx Aa Dsa Serijos numeris: 280/75 r 22.5 Gražus terminalo vilkikas, sunkiasvorės padangos ant ratlankio

Būklė: naudotas, Gamybos metai: 2005, Pagaminimo metai: 2005 m. lapkritis Serijos numeris: 280/75 R 22.5 ANT RATLANČIO, 10 SKYLIŲ. Chsdpfx Asxwk Ttja Dja SPECIALIOS SUNKIOSIOS TERMINALO TRAKTORIAUS PADANGOS 10/28 MM

Būklė: naudotas, galia: 49 kW (66,62 AG), kuro tipas: dyzelinas, pirmoji registracija: 10/2018, Gamybos metai: 2018, veikimo valandos: 7 900 h,

Būklė: naujas, Saw blade dimensions: 3650 x 27 x 0.9 mm Cutting speed: 15 – 100 m/min Cjdeyv Nylspfx Aa Djha Vice opening: 335 mm Cutting capacity at 90°: round 300 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 45°: round 260 / 200 mm Cutting capacity at 45°: square 250 / 180 mm Cutting capacity at 45°: flat 270 x 200 / 200 x 160 mm Cutting capacity at 60°: round 180 mm Cutting capacity at 60°: square 170 mm Cutting capacity at 60°: flat 170 x 170 mm Total connected load: 2.2 kW Weight: 1,105 kg Dimensions: 2700 x 2300 x 1800 mm Electrohydraulic fully automatic band saw with multi-microprocessor control and additional semi-automatic, semi-automatic dynamic, and manual operation modes. - Automatic cycle (cuts from 0° to 60° left). CNC automatic operation with two controlled axes, allowing the programming of up to 1000 different cutting programs for materials of identical thickness, each with separate cutting lengths and quantities. - Semi-automatic, semi-automatic dynamic, and manual cycles (cuts from 45° right to 60° left) - Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand control button) - Manual or semi-automatic dynamic cycle for direct cutting operations without programming. Selected features: - New fieldbus communication system (Modbus protocol) - Display with 20 characters x 4 lines for showing technical parameters such as: blade speed, programmed and completed cut quantities, blade thickness, feed length, cutting time, ammeter, blade tension, and display of approximately 100 diagnostic messages and warnings — available in the user’s selected language. - Logging and display of alarm and error messages, with the possibility to review past incidents. - Automatic parameter setting via control system when a new drive or inverter is installed. - Electronic inverter for infinitely variable blade speed adjustment from 15 to 100 m/min. - Latest generation hydraulic control unit, offering high performance and low energy consumption. - New 600 mm material feed with stepper motor and ball screw mounted on opposing ball bearings. - Saw bow stroke programmable directly from the control panel for adaptation to the workpiece. - Electronic blade tension monitoring. - Automatic cutting force monitoring via a servo valve mounted directly on the cylinder. - Coolant tank (equipped with 2 electric pumps for band lubrication and cooling) built into the machine base. - Chip drawer (can be replaced by a chip conveyor — see special accessories) - Prepared for installation of a minimum quantity lubrication system for the blade (optional), alongside the standard emulsion oil lubrication. - Chip removal brush. - Machine is configured for pallet truck transport. - Bi-metal band saw blade suitable for solid and profile material.

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vice opening: 335 mm Band speed: 15 - 100 m/min Automatic feed: 600 mm Saw blade dimensions: 3650 x 27 x 0.9 mm Control: MEP CNC Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (L x W x H): 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, additionally featuring: * semi-automatic * semi-automatic dynamic * manual operation Description: - Robust electro-hydraulic fully automatic bandsaw (INDUSTRIAL) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical keys for saw operation functions * Ensures reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swivelling arm for convenient and safe operation * Display and recording of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° to the left - Semi-automatic, semi-automatic dynamic, and manual cycles * Mitre cuts from 45° right up to 60° left - Choice of manual or semi-automatic dynamic cycle * For performing cuts without programming - Safety enclosure for operator protection - Infinitely variable cutting speed from 15 to 100 m/min * Via frequency inverter - Latest generation hydraulic unit * High-performance with low energy consumption - Material feed by stepper motor with ball screw spindle * Mounted on opposing ball bearings * Single stroke 600 mm, repeatable for any length - Saw head positioning and feeder movement via joystick - Automatic detection of cutting start position - Manual blade tension control with display readout * Using electronic converter Chedexabavjpfx Aa Dja - Automatic monitoring of cutting load * By servo valve mounted directly on cylinder - Coolant tray integrated into base frame - Chip removal brush - Bi-metal saw blade for solid and profile materials - Tool kit and instruction manual with spare parts list * Mitre accuracy: 2/12 degrees * Length accuracy: plus/minus 0.1 mm per feed stroke Manufacturer’s note - please observe: When installing this saw in a network with residual current circuit breaker (RCCB), it must be all-current sensitive (Type B) and rated not less than 300 mA.

Būklė: naudotas, Gamybos metai: 2011, veikimo valandos: 3 725 h, 2011 | Bomag BW 332 DEEP Impact | Naudotas volo ritinys | 3725 darbo valandos 📍 Vieta: Vokietija 🚛 Pristatymas prie jūsų durų – naudokite mūsų transporto skaičiuoklę, kad įvertintumėte pervežimo išlaidas! 💰 Pirkite dabar už 138 500 EUR arba pateikite pasiūlymą. Apmokėjimas atsiėmimo metu galimas už nedidelį mokestį (priklauso nuo patvirtinimo)* 👷‍♂️ Nepriklausomo eksperto patikrintas 43 tikrinimo punktai: 30 patvirtinta ✅ 13 su trūkumais ℹ️ 0 rimtų defektų ⚠️ 📌 Inspektoriaus komentaras: Pilnai veikiantis, yra neprioritetinių priežiūros darbų 📄 Norite pamatyti visą patikrą, papildomas nuotraukas ar vaizdo įrašą? Patarimas: Nuoroda „38821 Equippo“ dažnai naudojama ieškant daugiau informacijos internete. 💡 Kodėl verta rinktis šią mašiną ir mūsų paslaugas: ✔ Kruopšti profesionalų apžiūra ✔ Pristatymas į objektą Chodpfx Aeyux Eyoa Dea ✔ Piniginė grąžinimo garantija ✔ Saugios ir lanksčios atsiskaitymo galimybės 🔄 Ieškote kitos technikos? Siūlome patogius įrankius ir išteklius visiems įrangos savininkams ir operatoriams – lengvai prieinama mūsų platformoje.

Būklė: visiškai atnaujintas (naudotas), Remontuojame visas Heidenhain rankenėles, pvz., HR 250, HR 330, HR 410. Remontuojame ir pažeistus įrenginius. Galimi nauji korpusai ir laidai, pvz., HR 330. Nauji korpusų dangteliai HR 410. Chedpfxsq Slpro Aa Doa Galimas ir mainų variantas. Kreipkitės dėl savo modelio.

Būklė: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° – flat: 330 x 260 mm Cjdpfx Aofg E H Esa Doha Cutting capacity at 90° – square: 260 x 260 mm Cutting capacity at 45° – square: 250 mm Cutting capacity at 45° – flat: 270 x 200 mm Cutting capacity at 60° – round: 180 mm Cutting capacity at 60° – square: 170 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight approx. 1.1 t Space requirement approx. 3.3 x 2.83 x 2.23 m Equipment/features: - Electrohydraulic fully automatic band saw with additional semi-automatic, semi-automatic dynamic, and manual operation modes - Automatic cycle (cuts from 0° to 60° to the left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows cuts outside of series production to be made directly without programming - Numerically controlled band saw with new, specially developed Windows CE-based control system from MEP for automatic machines - User interface with 7" touchscreen display and mechanical buttons for machine operation functions - Infinitely variable cutting speed adjustment from 15 to 100 m/min via frequency inverter (VFD) - Material feed with stepper motor via ball screw spindle – mounted on opposing ball bearings; single stroke 600 mm - Repeatable strokes for cutting any length - Automatic monitoring of cutting force via a servo valve mounted directly on the cylinder - Coolant tray integrated in the machine base - Swarf removal brush - Bimetal band saw blade for solid and profile material - Tool kit and user manual with spare parts list

Būklė: naudotas, mašinos/transporto priemonės numeris: V-17 1782, Jaw width: 103 mm Chjdpfjdp S U Nsx Aa Dsa Jaw height: 37 mm Clamping range: 175 mm Swivel range: 90° Space requirement: 600 x 180 x 150 mm

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: R2D P1503, Verpstės skersmuo (įrankio laikiklio anga): 32 mm Maksimalus apdirbamo gaminio skersmuo: 140 mm Atstumas tarp verpstės galų: 720 mm Pagrindinė verpstė, įtvaras pagal DIN 55026: KK 4 Anga traukiamajame vamzdyje: 32 mm Priešingoji verpstė, įtvaras pagal DIN 55026: KK 4 Eigos ilgis ašimi Z: 510 mm Eigos greitis: 24 m/min Pagrindinės verpstės pavara, kintamosios srovės variklis: 10 kW Besilaipsnis greičio diapazonas: 0–8000 aps./min. Priešingosios verpstės pavara, kintamosios srovės variklis, galia esant 40 % darbo ciklui: 10 kW Besilaipsnis, reguliuojamas greičio diapazonas: 0–7000 aps./min. Įrankių sistema: diskinis laikiklis su krypties valdymo logika, 25 įtvarai Varomų įrankių skaičius: 12 Varomų įrankių greitis: 0–6000 aps./min. Elektrinis prijungimas: 400 V Chedpef Ddafsfx Aa Doa Apytikslis svoris: 3000 kg Reikiamas plotas: 2600 x 1980 x 2350 mm

Būklė: nepatikrintas (naudotas), Gamybos metai: 2020, Funkcionalumas: nepatikrintas, bendras svoris: 1 068 kg, keliamoji galia: 210 kg, rankos pasiekiamumas: 2 696 mm, valdiklio modelis: KUKA KR C4, Aukcionuojamas komplektas, sudarytas iš 3 KUKA KR 210 R2700 extra ir 1 KUKA KR 210 R2700 extra FLR! Serijos numeriai: 8104130 / pagaminimo metai: 2020 Serijos numeriai: 1348207 / pagaminimo metai: 2020 Serijos numeriai: 1348187 / pagaminimo metai: 2020 Serijos numeriai: 8101962 / pagaminimo metai: 2020 TECHNINĖS DETALĖS Keliamoji galia: 210 kg Veikimo spindulys: 2.696 mm ĮRANGOS INFORMACIJA Chedpfjyft N Usx Aa Dja Valdymas: KUKA KR C4 Svoris vienam robotui: apie 1.068 kg Energijos tiekimas: 3 × 400 V / 50–60 Hz KOMPLEKTACIJA 4 KUKA KR 210 R2700 extra / FLR pramoniniai robotai 4 KUKA KR C4 valdymo spintos 3 KUKA SmartPad valdymo pultai 4 Roboto valdymo kabelių rinkiniai Pastaba: 2 robotų valdymo spintose trūksta po 2 KSP modulius. Vienam robotui trūksta 1 KSP modulio ir valdymo pulto.

Būklė: naujas, modelio pavadinimas Chodpfx Aasgvkafe Dea Shark 332-1 SXI evo

Būklė: naujas, Model designation Shark 332-1 CCS Chodpfx Aajgvquws Doa

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic semi-automatic bandsaw SHARK 332 SXI EVO with semi-automatic-dynamic and manual operation. Equipped with MEP-28 control unit for mitre cuts from 45° right to 60° left. Key features: - New centralized control console mounted on an articulated arm. - Low-voltage operating panel: polyester membrane keypad with thermoformed, raised buttons and activation control signal. - Display for: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Time used for each cut * Saw band motor current draw * Saw blade tension * Saw blade speed * Numeric display of head position - IP55 manual cycle switch handle (24 V). - Complete programming of all special cutting cycles. - Capability to define additional special cutting cycles for specific applications. - Latest-generation high-performance, energy-efficient hydraulic control unit. - Rotating table (mounted on 420 mm roller bearing with preloaded thrust bearing). - Double band speed (40/80 m/min) with control system. - Prepared for installation of an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit the cut material. - Clamping device laterally movable to left and right, with quick-release vice. - Manual band tension control with display via electronic transducer on screen. - Base frame designed to retain all coolant, even for maximum angle cuts. - Coolant tray (equipped with electric pump for the lubrication and cooling of the saw blade), and chip drawer (can be replaced by a chip conveyor – see special accessories), both integrated in the base frame. Chodpfefg E H Uox Aa Dea - Prepared for installation of a minimum quantity lubrication set for the saw blade (optional, in addition to standard coolant lubrication with emulsion oil). - Chip removal brush. - Machine designed for pallet truck transportation. - Adjustable length stop for repetitive cuts. - Material support arm with roller for attaching the loading table. - Bi-metal saw blade for solid and profile material. - Tools and operating instructions in the respective user language.

Būklė: naujas, Cutting diameter: 300 mm Bandsaw blade length: 3320 x 27 x 0.9 mm Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering is performed by the saw’s own weight, compensated by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the necessary position for material feed. Electrical control panel (marked wiring connections, indicator light for operational readiness, main safety switch equipped with padlock, changeover or speed switch, emergency stop, thermomagnetic protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Chedpfefg E H Tjx Aa Dja Manual vise with quick-clamping device. Base frame with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional accessory). Electric coolant pump for cooling and lubrication of the bandsaw blade. Chip removal brush. Adjustable precision stops for repeated cuts of equal length. Machine designed for pallet truck transport. Bimetal bandsaw blade for solid and profiled material. Tools and operating manual.

Būklė: naudotas, Jaw width 200 mm Jaw height 67 mm Clamping width 325 mm Clamping width adjustable in three stages Csdpfsc Tcgcsx Aa Doha Overall height 165 mm Space requirements L - 800 x W - 300 x H - 165 mm Weight approx. 116 kg

Būklė: naudotas, Jaw width 200 mm with special jaws Chedpfx Asc Tcgbja Dsa Jaw height 67 mm Clamping range 325 mm Clamping range adjustable in three steps Overall height 165 mm Required space L - 800 x W - 300 x H - 165 mm Weight approx. 118 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 568746, bendras svoris: 1 068 kg, keliamoji galia: 210 kg, rankos pasiekiamumas: 2 700 mm, valdiklių gamintojas: KUKA, valdiklio modelis: KRC4, teach pendant gamintojas: KUKA, įėjimo įtampa: 400 V, įvesties srovės tipas: Oro kondicionierius, Roboto informacija: Gamybos metai: 2018 Darbo valandos: Tik 0,6 val. Būklė: Kaip naujas, nepriekaištingas Modelis: Kuka KR 210-2700 Extra Apžiūra ir išbandymas: Robotą galima bet kada apžiūrėti ir išbandyti mūsų vietoje. Cjdewtx Imopfx Aa Djha Šis robotas puikiai tinka taikymams, kuriems reikalingas tikslumas ir patikimumas. Jis buvo kruopščiai laikomas ir yra puikios techninės būklės. Pastaba: Parduodamas kaip naudota įranga, be jokių garantijų dėl daikto trūkumų.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Naudota automatinė hidraulinė juostinė metalo pjovimo staklė MEP SHARK 332 NC EVO Juostos matmenys: 3320x27x0,9 mm Pjovimo kampas: nuo 45° iki +60° Darbo režimai: rankinis, pusiau automatinis-dinaminis, pusiau automatinis, automatinis Chodpfx Aoul Svlea Dja Pjovimo greitis: 15-100 m/min (inverteris) Pjovimo pajėgumas: prie 0° – apvalus 300 mm – kvadratinis 260 mm – stačiakampis 330x260 mm Matmenys: 2600x2320x2000 mm Pagaminimo metai: 2011 Svoris: 1050 kg Įrenginys yra pilnai atnaujintas ir patikrintas.

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90°: flat 330 x 260 mm Cutting capacity at 90°: square 260 x 260 mm Cutting capacity at 45°: flat 270 x 200 mm Cutting capacity at 45°: round 260 mm Cutting capacity at 45°: square 250 x 250 mm Cutting capacity at 60°: flat 170 x 170 mm Cutting capacity at 60°: square 170 x 170 mm Cutting capacity at 60°: round 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) Chodexaagbspfx Aa Dsa - Capable of mitre cuts from 45° right up to 60° left * Mitre setting via large turntable - MEP EVO microprocessor control for managing all functions * Located front-right, pivotable - Option for manual or automatic saw arm descent * Infinitely adjustable descent speed of the saw frame - Saw band guides made of carbide plates - Hydraulic saw band tensioning including digital value display - 2x bandsaw speeds - 1x bi-metal bandsaw blade - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Functionality in semi-automatic mode: - Electro-hydraulic vice clamping - Electro-hydraulic saw frame lowering - Electro-hydraulic saw frame lifting - Electro-hydraulic vice opening SPECIAL ACCESSORY INCLUDED: - MEP LubeCut micro-dosing system

Būklė: naujas, Cutting diameter: 300 mm Cutting range at 90°: flat 330 x 260 mm Cutting range at 90°: square 260 x 260 mm Cutting range at 45°: flat 270 x 200 mm Cutting range at 45°: round 250 mm Cutting range at 45°: square 250 x 250 mm Cutting range at 60°: flat 170 x 170 mm Cutting range at 60°: square 170 x 170 mm Cutting range at 60°: round 180 mm Chodexaaqtspfx Aa Doa Speed range: 40 / 80 m/min Saw blade length: 3650 x 27 x 0.9 mm Machine weight: approx. 640 kg Equipment/features: - Heavy-duty electro-hydraulic bandsaw (INDUSTRIAL) - Large ball bearing turntable * For mitre cuts from 45° right to 60° left - Automatic saw bow lowering * With steplessly adjustable feed * Automatic end-stop at end of cut - Manual cutting mode selectable - 2 saw blade speeds - Saw band guide with carbide plates - 1x saw blade - 1x angle stop - Integrated swarf removal brush - Operator control panel – front right - Hydraulic pressure accumulator for saw blade tension * With analogue pressure gauge (manometer) - Machine base with forklift pockets - Coolant system - Operating manual in German

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 60° (round): 180 mm Cutting capacity at 60° (flat): 170 x 170 mm Material support height: 600 mm Feed min/max: 50,000 mm Vice opening: 335 mm Blade speed: 15 - 100 m/min Automatic feed: 600 mm Saw blade dimensions: 3650 x 27 x 0.9 mm Total power requirement: 2.2 kW Weight: 1,105 kg Dimensions (L x W x H): 3.3 x 2.83 x 2.23 m electro-hydraulic fully automatic band saw, with additional: * semi-automatic * semi-automatic dynamic * manual operation Description: - Robust electro-hydraulic fully automatic band saw (INDUSTRIAL) * MEP WINDOWS numerical control unit * User interface with 7” touch screen display * Mechanical buttons for machine operation functions * Guarantees reliable operation, simple and intuitive * Real-time monitoring of all cutting parameters * Swiveling arm allows convenient and safe operation * Display and logging of alarm and error messages - Mitre cuts in automatic cycle from 0° to 60° left - Semi-automatic, semi-automatic dynamic and manual cycles * Mitre cuts from 45° right to 60° left - Manual or semi-automatic dynamic cycle selectable * to perform cuts without programming - Protective enclosure for worker safety Cjdpfsxab S Eox Aa Deha - Continuously variable cutting speed from 15 to 100 m/min * via frequency inverter - Latest generation hydraulic unit * highly efficient with low energy consumption - Material feed with stepper motor via ball screw spindle * mounted on opposing ball bearings * 600 mm single stroke, repeatable for any length cut - Positioning of saw head and movement of feeder via joystick - Automatic detection of cut start position - Manual blade tension monitoring with display indication * via electronic transducer - Automatic monitoring of cutting load * via servo valve mounted directly on the cylinder - Coolant tray integrated in the base frame - Chip removal brush - Bimetal saw blade for solid and profile materials - Tools and operating manual with spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed stroke SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Būklė: naujas, Cutting diameter: 300 mm Cutting capacity at 90° (flat): 330 x 260 mm Cutting capacity at 90° (square): 260 x 260 mm Cutting capacity at 45° (flat): 270 x 200 mm Cutting capacity at 45° (round): 260 mm Cutting capacity at 45° (square): 250 x 250 mm Cutting capacity at 60° (flat): 170 x 170 mm Cutting capacity at 60° (square): 170 x 170 mm Cutting capacity at 60° (round): 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3650 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Features: - Heavy-duty electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP Microprocessor controller EVO for full function control * Mounted front right, rotatable - Choice of manual or automatic lowering of saw bow * Infinitely variable adjustment of the saw bow descent - Saw blade guides made from carbide inserts - Hydraulic blade tensioning – including digital display indicator - 2 saw blade speeds - 1 BI-Metal bandsaw blade included - Coolant device - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation functionality: - Electro-hydraulic clamping of the vice Chsdpfxjxaav Ao Aa Dea - Electro-hydraulic lowering of the saw bow - Electro-hydraulic lifting of the saw bow - Electro-hydraulic vice release

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: PE, PP, or three-layer pipe production, or for pipe sheathing and application of stripes The line has been used for producing heating pipes Condition: Very good 2 units of WEBER ZE30 co-extruders Screw diameter: 30 mm Chodpfx Ashy Tp Dja Dea The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany