Tsuruta Electric Co. Transformatorius pirkti naudotą (48 857)

Būklė: labai geros būklės (naudotas), For sale: Professional Schneider Electric Masterpact NW25 H1 air circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is designed for use in industrial electrical power distribution systems—low-voltage switchgear, manufacturing plants, industrial facilities, and power installations. Masterpact NW series circuit breakers are engineered for demanding industrial environments and provide reliable protection of installations against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the attached photos. Technical specifications: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% of Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Bjdpoyua Amjfx Af Ajwl Assembly: Schneider Electric Venray (Netherlands) The circuit breaker provides protection for the installation against overload and short circuit and enables adjustable protection parameters thanks to the Micrologic unit. Applications: - Low-voltage switchgear - Industrial plants - Power installations - Energy distribution systems - Large machinery and production lines ✔ Heavy-duty industrial design ✔ High short-circuit breaking capacity ✔ Adjustable Micrologic protection ✔ Equipment by renowned manufacturer Schneider Electric

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, Technical data: Type: CPCD50-XC11H Load capacity: 5,000 kg (500 mm load center) Drive: Diesel Engine: Xinchai Stage V engine, 60 kW/2,200 rpm Mast: Duplex mast (two-stage) Lift height: 3,000 mm (maximum fork height) Free lift: 150 mm (overall height remains unchanged) Machine width: 1,510 mm Machine height (with overhead guard): 2,350 mm Forks: 1 pair, 1,520 x 150 x 50 mm Bwodpfsy It Uqox Af Ajl Aisle width (AST): 4,960 mm Tilt cylinders: 6° forward – 12° backward Tyres: Solid rubber tyres SE: front: 300-15-18PR, rear: 7.00-12-12PR Steering: Rear wheel steering, hydraulic Brake system: Self-adjusting hydraulic drum brake/mechanical parking brake Transmission: Automatic, hydrodynamic Travel speed: loaded 23 km/h, unloaded 24 km/h Hydraulics: 4/4 control valve Lighting: Full LED lighting (two work lights front and rear, indicators, brake and reverse lights) Battery: Maintenance-free starter battery Equipment: Horn, indicators, rear-view mirrors, electric reverse gear, suspended driver’s seat with safety belt for increased comfort and safety Safety equipment: Stabilizer, grab handle, steering wheel knob, automatic drive-away lock Additional equipment: Hydraulic fork positioner, side shifter

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 90 kW (122,37 AG), Gamybos metai: 2026, Plastik-Quetschtrockner sind ein unverzichtbarer Bestandteil von Kunststofffolien-Waschanlagen. Nach dem Waschvorgang enthalten die gewaschenen Folien in der Regel noch bis zu 30 % Restfeuchte. Ein hoher Feuchtegehalt beeinträchtigt die Effizienz und Produktivität des nachgeschalteten Extrusions- und Pelletisierungsprozesses erheblich. Der Einsatz eines Quetschtrockners ist daher unerlässlich, um die gewaschene Folie zu entfeuchten, die Schüttdichte von Recyclingfolien und Fasermaterialien zu erhöhen, die Kapazität des anschließenden Extrusionsprozesses zu steigern sowie die Qualität der Endprodukte entscheidend zu verbessern. Selbst plastische Folien, die nach dem Waschen durch Zentrifugaltrockner (Spin-Dryer) laufen, enthalten in der Regel noch über 10 % Restfeuchte. Diese Menge würde die Produktivität des Extruders deutlich reduzieren und die Pelletqualität negativ beeinflussen. Die neueste Entwicklung auf dem Gebiet der Trocknung und des Recyclings von gewaschener Folie sind Kunststoffquetschtrockner, die den Feuchtigkeitsgehalt auf ein Minimum reduzieren. Das ausgepresste Material enthält maximal 3 %, meist sogar nur 1 % Restfeuchte. Der Betrieb dieser Trockner ist wesentlich kostengünstiger als Heißlufttrocknung. Zudem ist das Ergebnis überzeugend: Die aufbereitete und ausgepresste Agglomeratmasse kommt direkt aus der Waschanlage mit über 40 % Feuchtigkeit und wird zu einem rieselfähigen, dichten Agglomerat verarbeitet. In diesem Zustand ist kein Cutter-Compactor-Extruder mehr notwendig, da das Material ausreichend trocken und verdichtet ist, um es direkt der Extrusion zur Pelletierung zuzuführen. Bwodpfx Afewg Sd Uo Ael GENIUS verfügt über mehr als 30 Jahre Erfahrung in der Herstellung von Recycling-Trocknern und Extrudern und hat über 600 dieser Trockner an die Kunststoffrecyclingindustrie verkauft. Die Baureihe umfasst vier Modelle mit einer Stundenleistung zwischen 250 kg und 1.200 kg.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Komplette Kunststoff-Recyclinganlage für Folien- und Faserstoffe vom führenden taiwanesischen Hersteller für Kunststoff-Recyclingmaschinen. GENIUS Machinery Co mit mehr als 30 Jahren Erfahrung in der Herstellung von Recyclingextrudern. Der Extruder kann ohne vorherige Zerkleinerung oder Schreddern beschickt werden. Materialien in Ballen, lose oder auf Rolle können zugeführt werden. Die Linie kann komplett geliefert werden mit Gurtförderer, Schneidverdichter, Hauptextruder, Filtersystem (verschiedene Ausführungen je nach Anforderung), Heißschnitt-Granuliervorrichtung, Zentrifugalgranulattrockner, Vibrationssieb und Granulatsilo. Zusätzliche Peripheriegeräte können bereitgestellt werden. Eine zweistufige "Cascade"-Variante ist ebenfalls erhältlich, speziell für stark bedruckte oder sehr verschmutzte Folien, die eine doppelte Filtration erfordern. Alternative Größen von 100 kg/h bis zu 1.200 kg/h sind verfügbar. Vollständiger Vertrieb, Support und Schulungen sind für diese modernen und wirtschaftlichen Maschinen in Großbritannien und Europa verfügbar. Bsdpowg R Rtjfx Af Aowl

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 198 kW (269,20 AG), Plastik-Quetschtrockner / Agglomeratoren sind ein unverzichtbarer Bestandteil von Kunststoff-Folienwaschlinien. Nach dem Waschvorgang weisen gewaschene Folien in der Regel noch bis zu 40 % Restfeuchte auf. Ein hoher Feuchtigkeitsgehalt beeinträchtigt die Effizienz und Produktivität des nachfolgenden Extrusions- und Granulierprozesses. Der Einsatz eines Kunststoff-Quetschtrockners/Agglomerators ist daher unerlässlich, um das Material zu entwässern und die Schüttdichte des recycelten Folien- und Faserstoffs zu erhöhen. Dies steigert nicht nur die Kapazität der Extrusionslinie, sondern verbessert auch die Qualität der Endgranulate entscheidend. Bsdewg Sgcopfx Af Ajwl Selbst durch einen Spinn-Trockner aufbereitetes, wassergewaschenes Kunststoff-Folienmaterial enthält häufig noch über 10 % Feuchtigkeit, was eine konventionelle Agglomeration im Chargenbetrieb wirtschaftlich unrentabel macht. Durch die signifikante Reduzierung des Feuchtigkeitsgehalts steigt die Produktivität des Extruders sowie die Qualität der Granulate deutlich. Die neueste Entwicklung zum gleichzeitigen Trocknen und Agglomerieren von gewaschenen Folien sind Kunststoff-Quetschtrockner, welche den Restfeuchtegehalt auf ein Minimum senken können. Das Endmaterial enthält maximal 3 %, meist jedoch nur etwa 1 % Restfeuchte. Der Betrieb ist wesentlich kostengünstiger als Heißlufttrocknung, bei der das Material weiterhin in leichter Flockenform vorliegt. Zudem ist das Ergebnis besser, da das Material kontinuierlich direkt von der Waschlinie mit mehr als 40 % Feuchtigkeit dem Trockner zugeführt und als dichtes, rieselfähiges Agglomerat ausgetragen wird. In dieser Form ist kein Schnittverdichter-Extruder mehr erforderlich, was zusätzlich Energie spart, denn das Material ist so trocken und fest, dass es direkt dem Extruder zur Granulierung zugeführt werden kann. Mit über 30 Jahren Erfahrung in der Herstellung von Recyclingtrocknern und Extrudern hat GENIUS bereits mehr als 600 dieser Trockner an die Kunststoffrecyclingbranche verkauft. Im Sortiment befinden sich vier Modelle mit einer Durchsatzleistung von 250 kg/h bis 1.200 kg/h.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, Automatische Verpackungsmaschine für Toilettenpapier und Küchentücher Die Maschine wurde für weniger als 10 Betriebsstunden verwendet. Nach dem Kauf wurde sie lediglich für einige Testläufe eingesetzt und danach in einem trockenen Lager eingelagert. Seitdem wurde sie nicht mehr genutzt. Aufgrund mehrfacher Transporte können am Gerät leichte Verformungen vorhanden sein. Technische Daten: Stromversorgung: 220V, 50Hz Verpackung: Toilettenpapier 2/4/6/8/10 Rollen pro Packung mit Tragegriff, Handtuchpapier 2/4 Rollen pro Packung mit Tragegriff Verpackung in Folie, Überverpackung mit Schweißnaht auf der Rückseite. Es wird OPP-Folie verwendet, max. Rollendurchmesser 30cm, Foliendicke 0,03 - 0,10 mm laut Spezifikation. Andere Materialien wurden nicht getestet, hierzu liegen keine Erfahrungen vor. Für die Einrichtung und Konfiguration der Maschine wenden Sie sich bitte an den Hersteller. Bjdpfxouyhf Hj Af Aewl Die Maschine kann besichtigt, eingeschaltet und im automatischen oder manuellen Modus vorgeführt werden. Bedienungsanleitung liegt vor, Hersteller-Videos sind ebenfalls vorhanden.

Būklė: geras (naudotas), Gamybos metai: 2015,

Būklė: geras (naudotas), Dulkių siurblio variklis, siurbimo turbina, drėgnas dulkių siurblys - Gamintojas: Lamb Electric, siurbimo variklis iš Gansow grindų plovimo mašinos - Įtampa: 24 V - Kiekis: 29 vnt. sandėlyje - Kaina: už vienetą - Matmenys: Ø 145/H175 mm - Svoris: 2,3 kg/vnt. Bedodwdrgepfx Af Aowl

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, galia: 9,7 kW (13,19 AG), Technical data for Cardboard Shredder (2-Shaft Shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2007 Throughput capacity: 130 m³/hour Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Bwsdpsu Tha Isfx Af Ael Electrical connection: 32 A Shredder interior dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder exterior dimensions (without cover): 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t System application: The PZA type cardboard shredder was used in a Dutch logistics center to pre-shred loose, upright cartons from the returns department before baling. Cartons were loaded manually onto the infeed conveyor and transported directly to the shredder via a sliding belt conveyor. The pre-shredded cartons were then conveyed over several hundred meters to the baling press and compacted there. Scope of delivery: 1 unit Presto Cardboard Shredder (2-shaft shredder) type PZA Remarks: The cardboard shredder was an essential part of the disposal line and was well maintained to ensure high availability for the returns department. The machine is in good condition and immediately operational. Price is per unit, ex works from our warehouse in Siddeburen, Netherlands. All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Inspection by appointment is possible. We accept no liability for technical data or possible errors.

Būklė: geras (naudotas), Gamybos metai: 2010, veikimo valandos: 3 641 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 36 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 080 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, galia: 15 kW (20,39 AG), tūrio srautas: 90 m³/val, Technical Data of Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 hours Pressing Force (Main Press): 36 t Specific Pressing Force: 467 N/cm² Feed Opening Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput Under Operating Conditions (with material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester plastic twine Throughput with Bulk Density of: – 35 kg/m³: 1.8 t/hour Bwodpju Thh Ejfx Af Ajl – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport Dimensions (press only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (press): approx. 4 t Remarks: The baler has been function-tested in our workshop, then placed in storage, and is therefore available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. An inspection is possible by appointment. We do not assume liability for any technical specifications or potential errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2009, veikimo valandos: 22 029 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 000 mm, pildymo angos ilgis: 1 400 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 16 000 kg, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2025, Technical Data Press: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 hours (as of December 2025) Press force: 80 kN Specific pressing force: 103.9 N/cm² Feed chute dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length is variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughputs at a bulk density of: 30 kg/m³ approx. 6.0 t/hour 50 kg/m³ approx. 10.5 t/hour 100 kg/m³ approx. 17.5 t/hour Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC controller: Siemens S7-300 Display panel: Pulsotronic Installed machine dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight of press: 16 t Special Equipment: • Wear-resistant floor made of HARDOX steel • Special press ram for compacting 'difficult' materials and loose bulk materials of small particle size • Control cabinet air-conditioning • Machine feet height increase by 200 mm Comment: The machine was serviced and partially overhauled in our workshop. The following work was performed and parts replaced: • Disassembly of the press ram, breakdown into individual parts, overhauling the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right below the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Steel guide rails left/right above in the frame renewed • Replacement of the entire base plate, four-part, made from wear-resistant HARDOX steel Bsdpfxsx A U Ncs Af Aswl • Wire feed rails in the press floor newly welded and smoothed • Replacement of counter knife, two-part, in the frame • Adjustment of the knife gap to approx. 2.5 mm • Disassembly of the tie and twisting unit, breakdown into individual parts, overhauling the mechanics, replacement of all groove ball bearings and axial ball bearings of the twisting shafts, wire cutters cleaned and re-adjusted, chains lubricated and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses renewed • Oil and air filters renewed • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, was chemically analyzed, is still in good condition and therefore was not replaced; it can continue to be used • General maintenance carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for machine function test.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, keliamoji galia: 3 500 kg, kėlimo aukštis: 6 000 mm, kuro tipas: elektrinis, HT-30 Stivuitor Electric cu Clește — 3,5T / Înălțime de Ridicare 6m HT-30 este un stivuitor electric robust și performant, proiectat pentru operațiuni solicitante în depozite și industrie, unde este necesară ridicarea precisă la înălțime. Construit pe baza unui catarg din oțel tip H de 120 mm, acesta oferă stabilitate și durabilitate excepționale în orice condiții de operare. Specificații principale: Capacitate de ridicare: 3.500 kg Catarg triplu cu înălțime maximă de ridicare de 6 metri Lungime furci: 1.220 mm Clește de transport inclus Transmisie și sistem de propulsie: Motor de ridicare AC 10 kW Motor de deplasare AC 7,5 kW Anvelope solide, rezistente la uzură sporită, pentru o durată lungă de viață Echipamente de siguranță și confort: Iluminare LED de lucru, semnalizatoare stânga/dreapta, stopuri și faruri de deplasare Panou de bord LCD Claxon electric Centură de siguranță Catargul triplu și înălțimea de ridicare de 6 metri fac acest utilaj ideal pentru depozite cu rafturi înalte. Configurația cu motoare AC asigură întreținere redusă, frânare regenerativă și control lin și precis al sarcinilor. Cleștele integrat adaugă versatilitate la manipularea mărfurilor fără palet, precum role, butoaie sau baloți. Bsdpfx Ajyymkijf Ajwl Stare: Nou Disponibilitate: În stoc

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: RM6 NE IIDI, įvesties srovės tipas: trifazis, įėjimo įtampa: 11 000 V, įėjimo dažnis: 50 Hz, valdymo įtampa: 230 V, Įranga: CE žymėjimas, Vidutinės įtampos skirstykla likusi iš užsakymo, nauja, nenaudota. Bjdpfoy Hir Aox Af Ajwl

Būklė: paruoštas naudoti (naudotas), Kalıtım fırını, tavlama fırını, endüstriyel fırın, ikinci el ekipman Üretici: Budapeşte Elektrik Kablo Fabrikası Genel boyutlar: 890 x 1350 x 1510 mm Ağırlık: 785 kg Elektrik verileri: 400 V Sıcaklık kontrolörü ayarlanabilir: 1100°C'ye kadar Bwedpsuhmacsfx Af Asl +Elektrik panosunda sıcaklık kontrolörü

Būklė: naudotas, Linear unit, linear axis, portal axis with servo drive, synchronous servomotor, electric slide, loading unit, linear guide with servomotor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance: 1800 mm Travel per revolution: 20 mm Bedpfx Afew Uc T Ie Aowl Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum ball screw spindle speed: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Current consumption: max. 29.4 A Horizontal travel distance: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Overall weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Almost identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear unit 59702 + 59700

Būklė: naujas, Gamybos metai: 2026, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right or left bending. The plug-in bending tools enable rapid changeover to different tube sizes. Fast hydraulics to reduce non-productive time is an important factor for series production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick as required) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, length measurements, and rotation angles for up to 50 bending sequences on one tube length. To monitor springback values, there is a freely programmable database for up to 200 materials. The machine has 2 operating modes: In "Simple Bending", the length and rotation of the arcs relative to each other are automatically displayed. In "Controlled Bending" mode, the data is entered beforehand, and during bending a continuous actual/target comparison occurs. This ensures mispositions within a tolerance window are eliminated, minimizing user-related error rates. General error messages are displayed in full text on the large screen. Mandrel retraction is programmable and can be automatically withdrawn early once the bend angle is reached. The compact drive unit with detachable mandrel holder offers advantages for use on-site as well as for special applications with very large tube feed and is also available as a stationary version with an organization system for tools and mandrel rods. The affordable alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g., chemical industry • Metalworking • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bend radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bend angle setting (0.1°) • Mandrel holder lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum 180º bending result • Weight 800–900 kg (depending on configuration) • Ergonomic operation via safety foot switch Bjdpfx Aeng Exaof Aswl OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-release chuck • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Automatic positioning of length and rotation via servo motors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping force • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our demo room • Consultation and information session at your site • Consulting and handling of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries for both right-hand and left-hand bending. The interchangeable bending tools enable rapid changeovers to different tube sizes. Fast hydraulics to minimize non-productive times is a key factor for series production. Clamping pressure for tube securing is optimally adjustable. The PLC control (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and twist angles for up to 50 bending sequences on a single tube. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine offers two operating modes: In “Simple Bending,” the length and rotation of bends relative to each other are displayed automatically. In “Controlled Bending” mode, the data are input in advance, and a continuous target/actual comparison is made during bending. This excludes incorrect positioning within a specified tolerance window and thus minimizes user-related errors. General error messages are displayed in plain text on the large screen. The mandrel retraction is programmable and can be automatically retracted prematurely upon reaching the bending angle. The compact drive unit with removable mandrel support is advantageous for on-site assembly as well as for special designs requiring very long tube advance, and is also available as a stationary variant with an organized system for tools and mandrel bars. The cost-effective alternative to fully controlled CNC machines. POSSIBLE APPLICATIONS: • Hydraulic tubing • Pipeline construction • Plant construction, e.g. chemical industry • Metal fabrication • Prototype construction • Technical Data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Bending radius min/max: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control, bending angle adjustment (0.1°) • Mandrel support lengths 1500/3000/4500/6000 mm (special versions available longer) • Maximum bending result 180º • Weight 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-action chuck • Length and rotation positioning via automatic brake function or manual stops by foot switch • Semi-automatic positioning of length and rotation via servo motors • Pneumatic rotary stop • Tube calculation software • Laser-assisted tool monitoring for checking tool clamping • 10-inch touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB Bjdpfxjndn Ags Af Ajwl OUR SERVICE: • Test production welcome in our in-house demo room • Consultation and information at your premises • Consulting and processing for leasing/financed purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Būklė: naujas, Gamybos metai: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal addition for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The unit can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is securely clamped onto the rotary table using the clamping device and is bent around the bending tool. With this system, leg lengths to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy in bending operations. TECHNICAL DATA: Bedenh R Ekopfx Af Aowl • Bending capacity steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edged tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° optional OUR SERVICE: • Test production welcome at our facility in the demo room • Consulting and information meeting at your location • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance available at your location

Būklė: naujas, Gamybos metai: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room Bedponfvx Nsfx Af Ajwl • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: This compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm, both stationary and directly at the installation site. Transport is possible using a pallet truck or the optional caster wheels. A robust three-phase motor and a precision gearbox provide powerful drive. The machine stands out for its compact and slim design as well as its highly accessible bending area. Position detection directly on the bending axis ensures optimal accuracy. The bending angle is set simply and quickly via a user-friendly, menu-guided touchscreen interface available in 14 languages, guaranteeing even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction control allows variable speed adjustment for forward and return travel, and features a programmable overbending function to compensate for material springback. With the aid of four material characteristic curves, the material is automatically overbent to the required angle, ensuring precise results. The “stationary tube and rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are employed to achieve crease-free bending and to bend curves with minimal deformation, for example with stainless steel and copper tubes. The PB20 profile bending attachment allows for easy bending of flat, square, and round steel. The small-radius bending device (KBV) attachment makes extremely small bending radii possible. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunction machine control with bending angle setting (0.1°) • Maximum bending angle: 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii starting from 45 mm, includes 40 mm hexagonal shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small-radius bending device • Special tools as per specification • Customized software for special applications OUR SERVICE: • Welcome to test production in our in-house demo room • Consultation and information session on your premises Bjdpondk N Asfx Af Ajwl • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in for your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING Bedonfvy Uopfx Af Aowl This mandrel bending machine, featuring a manual eccentric quick clamping system for tube fixing, allows for efficient bending operations. The compact drive unit with a detachable mandrel carrier provides advantages for use directly at the installation site. Position feedback directly on the bending axis ensures optimal bending precision. The bending angle is set quickly and easily via a user-friendly touchscreen control with a menu-guided interface. The comfort control enables two selectable speeds, as well as a parameterizable overbending function to compensate for material springback. The bending process is greatly shortened thanks to an automatic 'clear travel' at the end of the bend. For more complex bending tasks, programs can be stored, managing a sequence of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be saved on the control unit or a USB stick. Plug-in bending tools allow for quick changeover to different tube sizes. For demanding geometries, the machine's bending direction can be easily changed to right- or left-hand bending as standard. The open bending unit enables, for example, the fabrication of railing frames with only one welding seam. Optional calculation software for the PC calculates the cut length for the entire geometry and determines the feed path, twist, and bending angle for each bend. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching a certain bending angle. POSSIBLE APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm/140 mm • Bending radii 2 x D • Multifunctional machine control with bending angle adjustment (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special versions longer available) • Max. 180º bend result • Weight 300-500 kg (depending on version) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital length and twist measurement (resolution 0.1) • Remote operation of all functions at the carriage (rotation and length stop) • Bending radius up to 250 mm • PC pipe calculation software OUR SERVICE: • Welcome to test production in our in-house demo room • Consulting and information sessions at your site • Consultation and processing for leasing/finance purchases via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII For tube dimensions from 20 - 90 mm, this bending system provides solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there is ample room for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the robust and rigid design of the mandrel carrier and bending arm, contribute to the desired bending result. The plug-in bending tools allow for quick changeover to other tube dimensions. The clamping pressure for tube fixation can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bending angles, lengths, and rotation angles for up to 50 bending sequences per tube length. For monitoring the springback values, a freely programmable database for up to 200 materials is available. The control system offers two operating modes: In 'Simple Bending', the system automatically displays the length and rotation of the bows relative to each other. In 'Controlled Bending' mode, the data is pre-set, and a continuous target/actual comparison is performed during the bending process. Also available with pneumatic stop or with gear-assisted length and rotation positioning. APPLICATION AREAS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metal construction • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm depending on material • Bending radius min/max: 40 mm/250 mm • Minimum bending radius: 1.5 x Ø (standard 2 x Ø ) • Multifunction machine control for bending angle adjustment (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Maximum 180º bending angle • Weight: 1600-3200 kg (depending on model) • Ergonomic operation via safety foot switch OPTIONAL EQUIPMENT: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-release chuck Bjdpfx Afjnh R Suo Aswl • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops with foot switch • Semi-automatic positioning of length and rotation via servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WiFi), or USB OUR SERVICE: • Welcome to test production at our facility in the demonstration room • Consultation and information meeting at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRACTICAL HAND PIPE BENDING DEVICE: The compact, mobile design enables precise and repeatable bending in a bench vice. The drive is operated via a screw-in handle. A lockable adjustment ring ensures repeatable bending accuracy. The interchangeable tools can be replaced with minimal effort. The 'stationary pipe and rotating tool' principle allows bending in the smallest possible space. For thin-walled pipes, sliding shoes are used for crease-free bending, allowing bends in stainless steel or copper pipes with minimal deformation. The optional version with a hexagonal drive enables use in a vice as well as the possibility to use the drive power of the bending systems 3000 and 6000. The KBV can simply be mounted onto the bending shaft of the machine. POSSIBLE APPLICATIONS: • Hydraulic pipework Bedpfxeng Amko Af Aswl • Prototype construction • Plumbing and heating installation TECHNICAL DATA: • Bending capacity Ø 6 to 18 mm • Manual bending angle limiter • Maximum bending result up to 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Tool case • Length stop OUR SERVICE FOR YOU ON SITE: • Welcome to test production at our in-house demo room • Consulting and information meetings at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases Bodpfxsng A R Sj Af Aswl • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY This compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox provide robust drive power. Bwedeng Ax Sopfx Af Ael Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set quickly and easily via a user-friendly, menu-guided touchscreen interface, which guarantees even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with angle sequences of up to 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and return motions, and a parametrizable overbend function compensates for material spring-back. Thanks to four selectable material curves, the material is automatically overbent to the required angle, ensuring a precise bending result. The “stationary pipe, rotating tool” principle ensures a minimal footprint during bending operations. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation in materials such as stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent effortlessly. The KBV small-radius bending attachment enables extremely tight bending radii. POSSIBLE APPLICATION AREAS: • Plant engineering • Hydraulic piping • Serpentine/Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Bending radius min/max: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1° increments) • Maximum bending angle: 240° • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop • Weight: 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bar up to max. 100 x 10 mm, round bar up to max. 20 mm • Roll bender RB43 – the RB43 mounts to the hex shaft on the bending axis. Switching to continuous bending mode transforms the system into a drive unit. • Small-radius bending attachment KBV • Special tooling according to specifications OUR ON-SITE SERVICE FOR YOU: • Welcome to test production at our facility in the demo room • Consultation and information meeting at your premises • Consulting and financing/leasing arrangements • Trade-in of your current machine • Service contracts, maintenance at your location