Smulkintuvas, 4 Ašių Smulkintuvas, Kapoklė pirkti naudotą (70 838)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Iodpfx Aajd Tbbdjuoar Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) Isdpfx Aefdkb Toauear - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Iedpfxed Tqalo Aauoar Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! Iodpfx Ajfdkb Ueaujar - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm Iaedpoguk A Hsfx Aauer - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing Isdpfxjfdkbhs Aauear - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) Iaodpfx Aeguk Dkoauor - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany Iedpfx Aaeguk Dvjusar - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: naudotas, Gamybos metai: 2016, Darbinis laukas: X=3300 mm Y=1280 mm Z=150 mm Praėjimo aukštis. Valdymo terminalas: 24" LED spalvotas ekranas. Rankinis terminalas ašių greičio valdymui. Programinė įranga: „Woodflash“. Vakuuminis siurblys 90 m³/val./50 Hz arba 108 m³/val./60 Hz. Frezavimo velenas 12 kW HSK F63 (12 000 aps./min.). 12 vietų linijinis įrankių keitiklis kairėje staklių pusėje + paėmimo vieta. Gręžimo galva DH 16 4H 2S: vertikaliai 12 velenų, horizontaliai 4 velenai, 2 griovelių pjūklai. Sandėlio vieta: Nattheim. Iedexy Tlwepfx Aaujar

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 42 000 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 3 315 kg, bendras ilgis: 3 200 mm, bendras plotis: 1 630 mm, bendras aukštis: 1 960 mm, variklių gamintojas: Siemens, galia: 236 kW (320,87 AG), tūrio srautas: 3 013 m³/val, darbinis slėgis: 4 juosta, triukšmo lygis: 77 dB, aušinimo tipas: vanduo, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, 1 unit low pressure screw compressor Manufacturer: Atlas Copco Model: ZE 4 VSD Year of manufacture: 2013 Volume flow: 3013 m³/h (50.2 m³/min) Operating pressure: 4 bar Operating hours: approx. 42,000 hours Shaft power: 225 kW Drive power: 236 kW Discharge temperature with aftercooler: 40°C Discharge temperature without aftercooler: 244°C Compressor speed: 3630 rpm Speed control: with integrated frequency converter Cooling: water cooling with FUNKE stainless steel shell-and-tube heat exchanger 1.4571 Electric motor: Siemens 1LG6 316-4ZZ91-Z Dimensions Length: 3200 mm Iodpfx Aeywr Tksauoar Width: 1630 mm Height: 1960 mm Weight: 3315 kg Also available: Cyclone afterseparator Manufacturer: BZ Zyklone Model: 175 (stainless steel) Condensate drain: Bekomat Shell-and-tube heat exchanger Manufacturer: Funke Model: A100 805-6-1Way Material: stainless steel 2x rubber compensator 1x intermediate flange valve DN 150 with AUMA actuator SG 05.1 F07 1x cooling water control valve Samson 3274 DN 50 PN 16 1x steel pipeline DN 150 with 2x 90° bends

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, keliamoji galia: 9 150 kg, keliamoji galia vienai sandėliavimo sekcijai: 3 050 kg, bendras ilgis: 22 800 mm, bendras aukštis: 3 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentynų eilučių skaičius: 4, rėmo aukštis: 3 500 mm, rėmo plotis: 1 100 mm, lentynos aukštis: 3 500 mm, lentyna ilgis: 22 800 mm, 4 dvigubos zonos padėklų stelažai (M35112711-3) po 5,7 m ilgio, 3,5 m aukščio, 1,1 m gylio, kiekvienas su 2 sekcijomis, po 2,7 m pločio, kiekviename po 3 traversų lygius, lentynos apkrova – 3000 kg. - 12 rėmų (RM3511 - RAL5019) - 24 pado plokštės, tarpinės, tvirtinimo medžiagos - 48 grindų ankeriai (ZZBA1210) - 48 viengubų traversų (T2711 - RAL2008) - 4 apkrovos lentelės (BSMcP) Rėmai varžtiniai, nesurinkti. Transportavimas / pristatymas: - iki 20 darbo dienų po apmokėjimo - pristatymas į statybvietę/montavimo vietą Iajdeyz Iccspfx Aaujr - iškrovimą iš sunkvežimio atlieka pirkėjas su nuosava kėlimo įranga - pristatymas galimas visoje Vokietijos teritorijoje, išskyrus salas! Pristatymas į ES valstybes pagal individualų susitarimą.

Būklė: geras (naudotas), Gamybos metai: 2005, bendras ilgis: 4 200 mm, bendras plotis: 2 500 mm, bendras aukštis: 1 800 mm, produkto aukštis (maks.): 4 mm, bendras svoris: 7 000 kg, Cutting capacity: 4 mm, cutting length: 3050 mm, throat depth: 350 mm, motor: 18.5 kW, motorized backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions: 420x250x180 cm, approx. 6,500 kg Iasdpfx Aetp I S Ajausr

Būklė: naudotas, Gamybos metai: 2016, Used Machine Cross-grain sanding machine Year of manufacture: 2016 Product Advantages Beneath every perfectly painted, stained, or oiled wooden surface lies an impeccably sanded substrate! Felder sanding machines are characterized by robust construction, state-of-the-art technology, and maximum productivity. Key Highlights at a Glance: - Sanding width: 1350 mm - Sanding thickness: 3–170 mm - Combined superfinish unit - Touch-screen control for all operations - The Felder operating concept ensures maximum process and operational safety Your advantages at a glance: Time Savings - Motorized adjustment of the contact roller to 0.01 mm from the control panel - Innovative unit arrangement for pre- and fine sanding of veneered workpieces - Brush units at machine outfeed - Lacquer sanding as an optional feature Convenience - Fixed infeed table height (machine head adjusts) - Touch screen control with clear image display and program memory - Machine data logger for sanding belt wear and more - Tool-free sanding belt changes Iaodpew I Uv Usfx Aausr - Large, foldable table extensions for heavy workpieces Flexibility - Units for calibration, fine sanding, or lacquer sanding - Variable feed speed up to 20 m/min via inverter Innovation - Electronically segmented sanding shoe with silicone technology for minimal air consumption - Combined superfinish unit including chevron glide belt to eliminate oscillation marks Quality - Heavy-duty machine construction - Durable machine components Standard Equipment - Finish 1350 Classic control - Control unit with 7” color touchscreen, 100 program memory slots, maintenance interval reminders - Alphanumeric error messages - Ammeter for load monitoring Feed Table - Fixed infeed height, stationary table at 900 mm - Electric height adjustment of units, fine-tuning from the control panel - Infinitely variable feed speed 2.8–20 m/min adjustable by inverter from the control panel - Hand protection and over-thickness workpiece safety device - Workpiece detection sensor with 25 sensors, 55 mm segment width - Endless treadmill-style feed belt with honeycomb structure - Automatic feed belt centering Cross-sanding unit Finish 1350C High Gloss - Segmented, electronically pneumatic sanding shoe (ESC), segment width 25 mm, including quick-change system - Chevron glide belt between sanding pads for uniform finishes without oscillation marks - Variable pressure adjustment on operator side - Electro-pneumatic sanding belt oscillation - Electronic belt tracking safety device - 1 Motor with 7.5 kW (10 HP) - Star-delta start-up - Cleaning blower with timer control - Cutting speed 12 m/sec - Sanding belt size: 140 x 4560 mm Combined Superfinish Unit 1350C: - Rubberized, grooved contact roller with 85–90° shore hardness and 142 mm diameter - Electromechanical position-controlled grit compensation - Segmented, electro-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Variable pressure adjustment on operator side - Chevron glide belt between sanding pads and sanding belt for uniform finishes without oscillation marks - Mechanically preloaded rubber pressure rollers - Electro-pneumatic sanding belt oscillation - Electronic belt tracking safety device

Būklė: labai geros būklės (naudotas), Edgebander FORMAT 4 Tempora 60.06 glueBox – used - Touchscreen - Swivelling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Diamond jointing cutters for both climb and counter rotation - Glue pot located underneath - Quick-change system for glue pot - Compatible with PUR adhesives - GLUEBOX system - Pressure unit with driven roller - End trimming unit with 2 HF motors - Pneumatically swivelling end trimming unit - Flush / radius trimming unit - Motorised position control of trimming unit - x-motion PLUS - Corner copying unit with diamond-tipped cutter - Radius scraper - Radius scraper with motorised positioning - Surface scraper - Surface scraper with usage-based operation - Entry lock - Spray device for release agent - Spray device for lubricant Isdju R S Nwjpfx Aauoar - Spray device for cleaning agent - Year of manufacture: 2022 ----- Technical Data ----- Edge thickness (coil material): 0.4 – 3 mm Edge thickness (strip material): 3 – 6 mm Workpiece thickness: 8 – 60 mm Min. workpiece length: 140 mm Feed speed: 10 m/min Screen size: 15 inches Jointing cutter dimensions: D 80 x 64 mm Jointing cutter motor power: 1.1 kW End trimming motor power: 0.35 kW Trimming station power: 0.75 kW Extraction connection diameter: 80 + 160 mm Compressed air connection: 7 – 10 bar Total length: 4,872 mm Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm Weight: 1,500 kg Quality Information: - All settings checked - Calibrated as per manufacturer specifications - Complete basic inspection - Complete basic cleaning - Electricals checked - Pneumatics checked - Immediately ready for use

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, bendras ilgis: 34 000 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentynų eilučių skaičius: 4, rėmo aukštis: 3 500 mm, padėklų vietos: 108 euro padėklai, rėmo plotis: 1 100 mm, lentynos aukštis: 3 500 mm, lentyna ilgis: 8 500 mm, atrama ilgis: 2 700 mm, 4 rows of pallet racks (4 x M35112711-2) Each 8.5 m long, 3.5 m high, 1.1 m deep Each with 3 bays, 2.7 m wide Each with 2 beam levels, bay load capacity 3,000 kg - 16 frames (RM3511 - RAL5019) - 32 base plates, laying material, fastening material - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment Iaedpfev Ukz Aex Aaujr - Delivered free to construction site / assembly location - Unloading from the truck to be carried out by the buyer using own lifting equipment - Delivery throughout the entire territory of the Federal Republic of Germany (except islands!). - Deliveries to EU countries according to individual agreement.

Būklė: labai geros būklės (naudotas), • Gamintojas: ABUS KG – Vokietija • Tipas: K-300 1-4 • Variklio galia: 3,8 kW • Maitinimas: 400 V / 50 Hz • Įrengtas elektromagnetinis stabdis – stabdymo momentas 90 Nm • Dantytas velenas – skersmuo apie 34 mm • Tvirtinimas: kvadratinis flanšas • Tvirta pramoninė konstrukcija, skirta naudoti ABUS tiltinėse kranose ir keltuvuose • Būklė: naudotas, veikiantis (tikros nuotraukos) Iaodpfx Asxbfuteauor

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 1 800 h, No. 3131 Isdpjrrh T Aofx Aausar CNC Machining Center FORMAT-4 profit H10 22.43 Used, year of manufacture: 2017 Operating hours: approx. 1,800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, loading unit FORMAT-4 L-Motion, and extraction system FELDER RL 300 Technical Data – CNC Machining Center FORMAT-4 profit H10 22.43: - Matrix table system made of phenolic resin - Grid table with two stop rows - Automatic central lubrication - HARDWARE control computer - Mobile control console - Handheld terminal for remote axis control - Two vacuum pumps, rated output 2 x 250 m³/h - Tool changer with 10 tools - Tool changer on the left in the machine frame: 8 tool positions for HSK - Milling spindle 12 kW (S6) HSK F63, 24,000 rpm - Central extraction via combined connections (D = 250 mm) - Woodflash software German version (H20/H08/H10/H50) - Axis travel path H10 22.43: X = 5,230 mm / Y = 2,560 mm / Z = 280 mm - Working area: X = 4,300 mm / Y = 2,160 mm / Z = 105 mm - Axis positioning speed: X = 100 m/min / Y = 100 m/min / Z = 30 m/min Technical Data – Loading Unit FORMAT-4 L-Motion: - Year of manufacture: 2017 - 2-axis design with 4 storage positions for feeding a H10 with lift table - CNC loading - Gentle transport - Fully automatic panel handling - Workpiece sizes: Length 2,000–4,200 mm / Width 600–2,100 mm / Thickness from 8 mm / Panel weight 200 kg - Density: Chipboard 650 kg/m³ / Raw MDF 750 kg/m³ - Stack height 1,800 mm Technical Data – Extraction System FELDER RL 300: - Year of manufacture: 2023 - Rated volume flow 6,000 m³/h, H3 GS dust-tested, JET cleaning - Compressed air connection 3/4-inch - Connection pressure 7–12 bar at 40 NL/min - Operating pressure in device: 6 bar - Chip container capacity: 500 l - Extinguishing device with dry powder extinguisher 12 kg Sale on behalf of customer, ex location Leipzig, without dismantling, without transport or installation Subject to errors in description and price Dismantling and loading by us available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale in as-is condition Technical specifications, condition descriptions, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as inspected” Images and videos are sample representations and do not reflect the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex works

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 440 mm, greitas poslinkis X ašimi: 400 m/min, sukimosi greitis (min.): 2 500 aps./min, valdiklių gamintojas: HEIDENHAIN TNC 123, Mašina labai geros būklės. Iš karto paruošta darbui. Iaedpsyxpraefx Aauer

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, galia: 19 kW (25,83 AG), įėjimo įtampa: 400 V, įėjimo srovė: 40 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, X ašies eiga: 4 000 mm, Y ašies eiga: 1 970 mm, Z ašies eigos atstumas: 450 mm, ruošinio ilgis (maks.): 3 000 mm, ruošinio plotis (maks.): 1 500 mm, ruošinio aukštis (maks.): 250 mm, ašių skaičius: 5, Įranga: dokumentacija / vadovas, Siūlome šį naudotą Format-4 PROFIT H350 16.30 perdirbimo centrą su pravažiavimu, pagamintą 2019 metais. Ijdpeyw H A Hjfx Aauear

Būklė: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, galia: 18 kW (24,47 AG), įėjimo įtampa: 400 V, įėjimo srovė: 40 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, Įranga: CE žymėjimas, dokumentacija / vadovas, Siūlome šį naudotą FORMAT-4 PROFIT H200R 13.33 pravažiavimo apdirbimo centrą, pagamintą 2022 m. Iaodpfxsyvtq Uo Aauor

Būklė: labai geros būklės (naudotas), keliamoji galia: 4 000 kg, Įranga: kojinis nuotolinio valdymo pultas, Heinrichsglück 4 tonų keliamoji galia, PUIKI būklė 4000 kg keliamoji galia suvirinimo sukamasis stalas, pilnas komplektas Horizontali keliamoji galia – 4000 kg, pakrypus – 4000 kg Nuoseklus posvyrio ir greičio reguliavimas Labai tvirtos konstrukcijos Greitis reguliuojamas be pakopų nuo 0,05 iki 1,5 aps./min, skaitmeninis ekranas Iedsyuph Eepfx Aaujar Sukamojo stalo diametras 1500 mm Aukštis horizontalioje padėtyje 1230 mm, pakrypus iki vidurio 1000 mm Ilgis 2,0 m x plotis 1,6 m Rankinis nuotolinio valdymo pultelis ir valdymas koja

Būklė: naudotas, Modelis: D Serijos Nr.: 20829 Talpa: Didžiausias tekinimo skersmuo virš staklių lovos: 508 mm Iajdpfxeyx Hw Te Aaujr Didžiausias atstumas tarp centrų: 4572 mm Ratų matmenys: 660 x 75 mm Darbinės galvos greičiai: (8) 22 – 129 aps./min Ratų galvos greitis: 735 aps./min Elektra: 415 V, 3 fazės, 50 Hz Varikliai: Ratų galva: 20 AG, 960 aps./min Darbo galva: 4 AG, 1440 aps./min Stalo variklis: 3 AG, 950 aps./min Komplekte: 4 vnt. 2 taškų atvirų atramų, pilnai sukomplektuotų 3 vnt. 2 taškų atramų, nepilnos Stalui tvirtinamas ratų formavimo įtaisas Aušinimo sistema Apytikriai matmenys: 13 000 x 2 500 x 1 800 mm Apytikslis svoris: 19 000 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 400 mm, pjovimo plotis (maks.): 400 mm, bendras aukštis: 1 720 mm, bendras ilgis: 2 600 mm, bendras plotis: 2 400 mm, bendras svoris: 2 200 kg, stalo aukštis: 700 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 400 mm, padavimo ilgis X ašis: 600 mm, juostinio pjūklo ilgas: 5 700 mm, pjūklo juostos plotis: 41 mm, Fully hydraulic high-performance band saw in heavy-duty construction, featuring a horizontally parallel moving saw blade, designed for cutting profiles, pipes, and solid materials of all qualities, including extremely difficult-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide saw bands. Saw unit made from solid polymer concrete, delivering maximum running smoothness and blade service life. The saw unit is guided by two vertical square columns (double-column guide) with hardened and ground guiding rails. Mechanical saw blade tensioning with pre-tensioned carbide blade guides. Material clamping is accomplished via two horizontal frame clamping vices. Material feed is provided by a non-driven roller conveyor with twelve rollers, integrated into the machine, allowing easy transport of short remnants. Year of manufacture: 2008 Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Automatic feed length: 600 mm Multiple material feed: 99,999 mm Cutting speed stepless: 20–130 m/min Total drive power: 7 kW Saw motor power: 4 kW Clamping pressure reduction: stepless adjustable Material support height: 700 mm Saw band dimensions: 5090 x 41 x 1.3 mm Shortest cut length in automatic operation: 6 mm Isdeupvrxspfx Aausar Remnant length in automatic operation: 80 mm Voltage: 380V / 50 Hz Dimensions (LxWxH): 2600 x 2400 x 1720 mm Weight: 2,200 kg Coolant system Full enclosure CNC control Idle monitoring Side guide rollers Height measurement system Light barrier

Gamybos metai: 1999, būklė: labai geros būklės (naudotas), Siūlome Heizbosch dujinį katilą (gamtinės dujos).\nTipas: LLR 4000\nKatilas, kurio galia 4 MW\nPagaminimo metai: 1999\nDarbinė temperatūra: maks. 120 °C, slėgis: maks. 6 bar\nVandens talpa: 5720 l\nNaudotas labai retai, tik gretimų dviejų biomasės katilų valymui. Iajdpfx Aajxxa Ivsusr

Būklė: naudotas, Apvalūs magnetai su MK 4 laikikliu, D = 140 mm ir D = 220 mm Ijdpfx Aajyr Nd Ujuoar