Kellenberger Ur175/1000 pirkti naudotą (9 772)

Būklė: paruoštas naudoti (naudotas), An older precision cylindrical grinding machine from Kellenberger, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. An on-site inspection is possible. Pgsdpfjw Edpgex Acaep

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, mašinos/transporto priemonės numeris: MIKA Seilzüge, 1x Demag DR lyninis keltuvas kranui Dėl daugelio užklausimų - kaina nurodyta už vienetą!!!! Podpfx Acsy D D S Soaogp Yra 5 vienetai, žr. sąrašą: 1x Demag lyninis keltuvas EKDR-Pro3 NL1600Kg/1,6t, serijos numeris 96656002, 4M, kablio eiga/kėlimas 12 m !! - 2-šaknis, pagaminta 2015 m. 1x Demag lyninis keltuvas EKDR-3 NL1600Kg/1,6t, serijos numeris 96656701, 2M, kablio eiga/kėlimas 12 m !! - 2-šaknis, pagaminta 2015 m. 1x Demag lyninis keltuvas EKDR-3 NL1000Kg/1,0t, serijos numeris 96305549, 4M, kablio eiga/kėlimas 12 m !! - 2-šaknis, pagaminta 2012 m. 1x Demag lyninis keltuvas EKDR-3 NL1000Kg/1,0t, serijos numeris 96305548, 4M, kablio eiga/kėlimas 12 m !! - 2-šaknis, pagaminta 2012 m. 1x Demag lyninis keltuvas EKDR-3 NL1600Kg/1,6t, serijos numeris 96305550, 4M, kablio eiga/kėlimas 12 m !! - 2-šaknis, pagaminta 2012 m. Su dviem kėlimo greičiais, kėlimo aukštis 12 m, keltuvo vėžė reguliuojama Kiekvienas su valdymo pultu ir elektros tiekimo jungtimi Bendras svoris apie 300 kg, jungtis 400V 50Hz Labai gera būklė, žiūrėkite nuotraukas Prekės vieta: 75053 Gondelsheim Galimas siuntimas, prašome teirautis pagal pašto kodą

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 125 mm, šlifavimo ilgis: 600 mm, šlifavimo skersmuo: 249 mm, valdymo spintos ilgis: 1 200 mm, valdymo spintos plotis: 40 mm, šlifavimo veleno greitis: 1 530 aps./min, valdymo spintos aukštis: 1 500 mm, bendras svoris: 3 250 kg, Offered here is a cylindrical grinding machine from manufacturer Kellenberger. The machine is in excellent condition. Make: Kellenberger Model: R 125x600 Technical specifications: Distance between centers: 600 mm Center height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel revolution, coarse/fine: 20/2.5 mm Hydraulic infinitely variable speed: 0.02–6 m/min Reversal travel, minimum: 1.5 mm Dwell time at reversal, stepless: 0–5 sec Swivel range: 11 degrees Cross slide: Travel, with feed handwheel in coarse or fine setting: 220 mm Travel per handwheel revolution, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Feed, electro-mechanical, with stepper motor: 0–9.99 mm/∅ Micro-stop of feed, per scale division: 1 µm/∅ Plunge grinding: feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle headstock: Pjdsyyn Ehjpfx Acaogp Grinding wheel, diameter x width x bore: 500x80x203.2 mm Motor power: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece headstock: Swivel range: 360 degrees Speeds, infinitely variable: 20–400 rpm Internal taper of spindle: MT 5 Motor power: 0.9 kW Tailstock: Internal taper of quill: MT 3 Quill travel: 30 mm Machine dimensions: 2800x1850 mm Weight: approx. 3000 kg

Būklė: naudotas, KELLENBERGER KEL-VARIA R175 x 1500 is a CNC cylindrical grinding machine designed for high precision, superior accuracy, and reliable operation. Capacities: center height 175 mm, center width 1500 mm, Z-axis 1650 mm, maximum workpiece weight 150 kg; grinding wheels Ø500×80 mm (bore 203 mm) or Ø400×63 mm (bore 127 mm); maximum grinding spindle travel 320 mm. Technical data: grinding wheel speeds steplessly adjustable from 1000 to 2150 rpm (peripheral speed 45 m/s); feed rate 7500 mm/min; workpiece spindle swivels -10/+100° with 8–800 rpm; permissible torque 160 Nm; grinding spindle motor 7.5 kW, workpiece spindle motor 2 kW; connection 3×400 V 50 Hz; rapid traverse 15 m/min; weight approx. 6000 kg; dimensions 4700×2300×2000 mm; compressed air 6 bar. Equipment: coolant unit, paper filtration system, MARPOSS touch probe, set of grinding wheels, live center, set of centers, set of workpiece drivers, set of gap gauges, lighting, 2 tool cabinets, tailstock with fine adjustment, coolant/mist extraction, collet chuck. Achieves tight tolerances Podpeyxn Itofx Acaogp

Būklė: dilaminuotas dirbtuvėje (naudotas), KELLENBERGER 600 U 175 yra didelio tikslumo, tiksli ir patikima apskrito šlifavimo staklė. Pajėgumas: centre aukštis 175 mm, centre atstumas 600 mm; šlifavimo diskas Ø350×50 mm, skylė 127 mm; šlifavimo galvutė 270°. Techniniai duomenys: disko apsukos 1500–3600 aps./min (4 žingsniai); ruošinio velenas 20–400 aps./min (be pakopų); stalo pakrypimas 10°, iki 6 m/min; prijungimas 3×380 V 50 Hz; šlifavimo veleno variklis 4 AG; svoris ≈2200 kg; matmenys 3000×1750×1600 mm. Priedai: 2 ašių skaitmeninis indikatorius, centravimo galvutė su tiksliu reguliavimu, vidaus šlifavimo įranga, disko apsauga, apsauginis dangtis, slankiojamos durys. Tinka sandarioms tolerancijoms automobilių, laikrodžių, įrankių gamybos, aviacijos ir medicinos technikoje. Pgjdpfx Acsyxn Dujaep

Būklė: naudotas, KELLENBERGER KEL‑VARIA R175 x 1500 yra CNC apvalus šlifavimo staklės, skirtos dideliam tikslumui, preciziškumui ir patikimumui užtikrinti. Talpa: centrų aukštis 175 mm, centrų atstumas 1500 mm, Z ašis 1650 mm, iki 150 kg; šlifavimo ratų skersmuo Ø500×80 mm (taip pat Ø400×63 mm). Techniniai duomenys: šlifavimo ratų greitis 1000–2150 min⁻¹, apvyniojimo greitis 45 m/s, šlifavimo eiga 320 mm, padavimas 7500 mm/min, varikliai 7,5/2 kW, greitasis režimas 15 m/min, 3×400 V, svoris ≈6000 kg, matmenys 4700×2300×2000 mm. Priedai: popierinis/aušinimo skysčio filtras, MOVOMATIC, Renishaw LP2H, flanšo nuėmėjas, nuotolinio valdymo pultas, MPM. Skirta siauroms tolerancijoms; pritaikymas: automobilių pramonė, laikrodžių gamyba, įrankių gamyba, aviacijos, medicinos technika. Podpfx Acoyxn A Rjaogp

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Longitudinal table travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight, cantilevered: 130 kg including clamping Internal spindle mount: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m As a world leader in Kellenberger overhaul/retrofit, we are not only able to deliver the machines in as-new quality with warranty, but can also offer you comprehensive service for your machines. Geometrically overhauled and freshly painted with original electrics, but with new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - 2-axis digital readout. X-axis resolution 0.5 μm Pgsdpfsd Ih Dvox Acaop Available options at extra charge: - Swivel angle display for upper table - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding spindle headstock (spindle height adjustment not possible) - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase of centre height up to max. 225 mm Included: - Operating tools - Clamping tube for chuck Further accessories on request. At present, the machine tool does not meet the essential health and safety requirements as specified in the German Industrial Safety Ordinance (BetrSichV 2015). The required minimum safety objectives must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1500 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ± 6° Table longitudinal travel: 1750 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg including clamping device Pgedpfod Ih Dwox Acaop Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight: approx. 2.9 t Space requirement: approx. 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show identical 1000mm model. Included: - New control cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Lift-off function for grinding headstock - Modern internal grinding attachment - Operating tools Extension: Table swiveling increased to 10° Optional: - Swivel angle indicator for upper table - Swivel angle indicator for workpiece headstock - Swivel angle indicator for grinding headstock - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Būklė: naudotas, Internal diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Spindle bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workhead swivelling: 360° Grinding spindle head swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±10° Table longitudinal travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines refurbished to as-new condition with warranty, but also offer service for your machines. Warranty: 12 months from delivery—for Germany and neighboring countries. Pure internal cylindrical grinding machine with stepless adjustable drive (0–100%). Available in current RAL colors! Pgjdpfed Ih Dxex Acasp Standard centre height 175 mm, extendable to 225 mm. Fixed internal grinding spindle with belt tension via tension pulley! Z-axis reversing accuracy max. 0.01 mm! Geometrically overhauled and newly painted, with: - New electrical cabinet. - New three-phase workpiece spindle motor and controller. - 2-axis digital readout, X-axis resolution 0.5 μm. Options: - Encoder with digital display in the workhead - New stable internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm Includes: - Operating tools Further accessories on request. The machine tool currently does not meet the fundamental safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The minimum required safety level must be determined by means of a risk assessment pursuant to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Pgjdod Ih D Nspfx Acaop Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – flying: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space required approx.: 3.1 x 2.0 m As the world’s leading company in the field of Kellenberger overhaul/retrofit, we not only offer machines delivered in as-new condition and with warranty, but can also provide comprehensive service for your machines, fully refurbished to metric standards and newly painted. Version R: Machine features central lubrication and roller guideways in the X-axis flat way as well as air lift in the grinding headstock. -Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional equipment at extra cost: - Rotary encoder with digital readout in the workpiece headstock - Rotary encoder with digital readout in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase in centre height to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Draw tube for chuck Further accessories available on request. At this time, the machine tool does not comply with the fundamental safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum protection level must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivels: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – between centres: 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m Machine completely overhauled according to Kellenberger standards. - Workpiece spindle drive utilises modern three-phase technology - 2-axis digital readout. X-axis resolution: 0.5 µm Optional extras (available at additional cost): - Rotary encoder with digital display on workpiece headstock - Rotary encoder with digital display on grinding headstock (not compatible with height adjustment via spindle) - New, robust internal grinding device, diameter 80 mm or 100 mm, with height adjustment - Centre height increase up to max. 225 mm - Variable speed control for grinding spindle Included accessories: - Operating tools - Collet tube for chuck Pgedpfxod Ih D Ro Acajp Further accessories available on request.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. New servo motors in the X-axis and for the workpiece headstock. Photo shows a previously delivered machine in original equipment. - Operation via the touch panel is extremely user-friendly. - The symbols on the control panel are virtually identical to the original control system, so no retraining is required. Pgodpfxsuwv Ide Acaop - Diagnostic function with display of PLC messages and digital I/O. - Dressing function can be expanded or modified according to customer requirements. - Option for spindle orientation of the workpiece spindle upon request. - New maximum infeed amount: 40 mm (can be further increased on request). - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Options: - Encoder with digital display in the workpiece headstock - Encoder with digital display in the grinding spindle stock (no height adjustment possible with spindle) - New, robust internal grinding attachment with 80 mm or 100 mm diameter, including height adjustment - Increase of centre height to maximum 225 mm - Speed control for the grinding spindle Includes: - Operating tools - Draw tube for chuck Additional accessories available on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic longitudinal and rapid traverse table movement. Versatile applications in production for external cylindrical and internal grinding, or for external, face and internal grinding of single workpieces in one setup. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine does not comply with the essential safety and protection requirements according to BetrSichV 2015 (German Occupational Health & Safety Regulation for the use of work equipment). Raising the required minimum protection level must be assessed by conducting a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control system: FAGOR EQUIPMENT -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -T6: internal grinding attachment -T7: internal grinding attachment -Spindle motor, water-cooled, 9.8 kW -Marposs tool measurement system -Active longitudinal positioning -Kel-Set -GAP control on T1 and T2 by ELASO (contactless), integrated into the control interface -GAP control on T3/T4 via fluid sensor -Semi-automatic balancing by ELASO, integrated into the control interface for T1/T2 -Tailstock, hydraulic with fine adjustment +/-150 µm -Dressing device on the lower table, workpiece spindle side -Dressing device on the lower table, tailstock side -Dressing device on the upper table -New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece headstock with direct drive *highly recommended for non-circular grinding *max. workpiece weight, between centers: 150 kg *max. workpiece weight, overhung: 75 kg *water-cooled *Morse taper 5 combined with short taper mount to DIN 55026 *spindle orientation stop *fixed lower section B-axis with direct drive, center height 225 mm *extremely torsion-resistant *high positional accuracy *resolution ° *water-cooled MECHANICAL OVERHAUL: - Complete machine overhauled according to Kellenberger measurement protocol - New paintwork New hydraulic unit: - Improved temperature control (oil cooler) - Energy-saving: only one pump, and not running continuously! - Pressure monitoring - Monitoring of water content in the hydrostatic oil (early detection of bellows damage) Hydrostatic screw drive in X axis - Wear-free, since no contact during operation - No loss of accuracy, even during prolonged operation under full load at maximum speed - Friction-free at low speeds - No reversal jump of friction force when changing direction - Transmits smallest rotational movements - No stick-slip effect even at low speeds - No fluctuation in friction torque due to recirculating balls - Higher axial stiffness than ball screw drives - Significantly better damping, leading to improved workpiece surface and longer tool life - No vibrations due to recirculating balls - Also suitable for high speeds and accelerations - Cost-effective alternative to linear motors, offering higher accuracy and much less heating - Much lower power loss and thus no swarf issues on permanent magnets - Much lower cooling requirements compared to linear motors ELECTRICAL OVERHAUL: -New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface Psdpfx Ajuxfu Nscaegp -Newly constructed control cabinet -New drive technology -Replacement of all electrical wiring (Berus pressure switches etc.) -New absolute glass scales in X and Z -New absolute encoder (for B-Axis) CONTROL SYSTEM: The grinding software consists of a base license and various options, depending on the machine configuration. Software base functions: - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Būklė: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine equipped with reinforced workpiece headstock for unsupported grinding of heavy workpieces. The machine will undergo a major service/partial overhaul including a geometry inspection report in accordance with Kellenberger new machine standards. Psdev Dxxzspfx Acaegp The machine tool currently does not meet the essential safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The necessary minimum safety objectives must be determined in the course of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm The machine was overhauled according to the Kellenberger inspection protocol and newly repainted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means the machine also received a completely new electrical system as part of this upgrade. Machine equipped with a reinforced workpiece spindle head for chuck grinding of heavy workpieces. Pedpevq R Uzjfx Acaegp Currently, the machine does not meet the fundamental safety and protection requirements specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Raising the required minimum safety standard must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. BEMA Standard Equipment: - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm - Speed control for the grinding spindle Included: Pgedpfx Ajd Ih D Eecaop - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. Pjdet Ii Rrepfx Acaegp An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Pgedjvdk N Eopfx Acajp Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Būklė: naudotas, Grinding diameter 350 mm Pedpfx Acot Ii Rfjaegp Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, įėjimo įtampa: 380 V, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, darbinio aukščio: 650 mm, mašinos/transporto priemonės numeris: SM20215245, Įranga: dokumentacija / vadovas, Tvarkingas Lantech C-1000, dešinysis Psdst Dn Hqjpfx Acasgp

Būklė: geras (naudotas), Record Panda 1000 Flow Wrapper Visos kontaktuojančios dalys iš nerūdijančio plieno 250 mm pločio dvigubos žnyplės Pedpfen R Suwjx Acasgp Reguliuojamas įvadas, maks. plotis 210 mm Atstumas tarp padavimo distančerių 330 mm Reguliuojama žnyplių ir presavimo temperatūra Padavimo ilgis 1500 mm Bendras ilgis 3500 mm Kintamas greitis Trifazis maitinimas Puikios būklės Kaina € 5 950

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workpiece headstock Disassembly, cleaning of parts, replacement of worn and defective parts, motor overhaul, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembled, inspected, overhauled. Hydraulics Disassembled, motor check, replacement of hoses, defective and worn parts. Hydraulic block inspected. X Axis Disassembly, replacement of worn parts such as O-rings, seals, rings, etc., overhaul of hydraulic piston, grinding of tables. Z Axis Disassembly, grinding of tables, replacement of worn and defective parts, hydraulic piston overhaul, newly painted. Electrical cabinet Complete inspection, various relays replaced. Painting Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer’s protocol. Inspection and cleaning of various accessories. Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff number 8460.2920 TECHNICAL SPECIFICATIONS Nominal centre distance 600 mm Max. centre distance (extended headstock) 750 mm Centre height, standard 125 mm Centre height with interchangeable shoes for headstocks 175 to 250 mm Max. workpiece diameter (125 mm centre height) 250 mm Max. workpiece diameter with interchangeable shoes 350 to 500 mm Table swivelling in either direction 10° Max. length for surface grinding (max. width = 200 mm) 900 mm Table speed with continuously variable hydraulic control up to approx. 6 m/min Table reversal dwell time 0-5 sec. Wheel for external grinding, diameter-width-bore 400x50x127 mm Wheel for surface grinding 250x13x76 mm Grinding spindle speeds 1500/1700/2200/3600 rpm Grinding headstock swivel 270° With index every 90° Vertical movement of grinding headstock, centre height 125-350 mm Cross travel of grinding headstock 285 mm Hydraulic rapid advance/retract stroke 40 mm Intermittent feed of the wheel by table reversal 0.001-0.03 mm/dia Continuous plunge grinding feed 0-0.9 mm/dia Micrometric feed stop, graduated 0.001 mm/dia Pgjdpfx Aow U Ry Njcaep Workpiece headstock swivel 360° Continuously variable workpiece spindle speed, standard/special 20-400 / 10-400 rpm Workpiece headstock/tailstock internal taper 5/3 Morse Grinding headstock motor, approx. 4 HP All technical details are given without obligation and subject to errors or omissions.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, bearing replacement, belt replacement, spindle disassembly, replacement of seals and O-rings + adjustment. Newly painted. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, belt replacement. New spindle bearings. Newly painted. Internal Grinding Attachment Disassembly, cleaning of parts, replacement of worn and defective components, assembly of the mounting and alignment of geometry. Newly painted. Hydraulics Disassembly, motor replacement, replacement of hoses and worn or defective parts. Hydraulic block checked. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., hydraulic piston overhaul, table grinding. Z Axis Disassembly, table grinding, replacement of worn and defective parts, hydraulic piston overhaul, scraping of V and flat guides. Newly painted. Measuring System 2-axis digital readout included Electrical Cabinet Replacement of motor terminals and relay controls. New wiring. New frequency inverter for the workhead. TECHNICAL SPECIFICATIONS Podpfxoxt Ilfe Acajgp Distance between centers 1500 mm Distance between centers (headstock and overhanging tailstock) 1650 mm Center height, standard 125 mm Center height with raising blocks 225/250 mm Maximum grinding diameter Ø 250 mm Maximum grinding diameter with raising blocks 450/500 mm Table Usable surface 2060x140 mm Maximum length and width for surface grinding 1750x200 mm Manual or hydraulic longitudinal travel 1750 mm Manual table movement per handwheel revolution – coarse 20.006 mm Manual table movement per handwheel revolution – fine 2.457 mm Continuous table speed, hydraulic –6 m/min Table swivel 6° Stop, return 0–5 sec. Work Spindle Workpiece speeds, continuously variable 20–400 min-1 Swivel 360° Work spindle internal taper MT5 Tailstock Tailstock spindle internal taper MT3 Manual or hydraulic spindle retraction travel 30 mm Dressing diamond internal taper MT0 Universal Grinding Head Transverse wheel slide travel 285 mm Rapid traverse, wheel slide (forwards & backwards) 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 min-1 Vertical movement of grinding spindle, center height 125–330 mm Cylindrical grinding wheel, max 400x50x127 mm Surface grinding wheel, max 250x20x76 mm Swivel of grinding head with locking at 90° increments 270° Wheelfeed One division of vernier 0.005 mm/Ø Automatic feed, max 0.9 mm/Ø Motors Grinding spindle motor 2,900 min-1 / 4.0 hp Workhead spindle motor 3,000 min-1 / 2.0 hp Coolant pump motor 2,850 min-1 / 0.12 hp Internal Grinding Device Bore 70 mm Int. grinding spindle speed Ø70 mm 14,000 min-1 Int. grinding spindle speed Ø50 mm 21,000 min-1 Unless otherwise stated, the technical data is provided without guarantee of accuracy or completeness.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 32461/2384, Origin of manufacture: Switzerland Voltage: 380 / 50 / 3 (V/Hz/Ph) Net weight: 2200 kg TECHNICAL DATA Nominal distance between centres: 600 mm Maximum distance between centres (workpiece spindle stock and tailstock retracted): 750 mm Standard centre height: 125 mm Centre height with interchangeable intermediate plate (workpiece spindle and tailstock): 175 → 250 mm Maximum possible swing diameter (125 mm centre height): 250 mm Maximum possible swing diameter with intermediate plates: 350 → 500 mm Table swivelling range, each side: 10° Maximum grinding length (table width = 200 mm): 900 mm Table speed, hydraulically and steplessly adjustable: approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for cylindrical grinding, diameter x width x bore: 350/400 x 50 max. x 127 mm Grinding wheel for surface grinding, diameter x width x bore: 250 x 13 x 76 mm Grinding spindle speeds (rpm): 1500 / 1700 / 2200 / 3600 Swiveling range of grinding spindle headstock: 270°, lockable every 90° Vertical travel of grinding spindle headstock (centre height): 125–350 mm Cross travel of grinding slide: 285 mm Pjdpfxjd Amife Acaogp Hydraulic rapid advance and return of grinding slide: 40 mm Feed per table reversal, stepless: 0.001–0.03 mm/rev Feed amount for plunge grinding: 0–0.9 mm/rev Micro stop for feed per division: 0.001 mm/rev Swiveling range of workpiece spindle stock: 360° Workpiece spindle speeds, steplessly adjustable normal/special: 20–400 / 10–400 rpm Internal taper, workpiece spindle/tailstock: Morse 5/3 Grinding spindle motor, approx.: 4 HP Errors and omissions excepted. Technical data provided without obligation. Inventory No. 2170089, Machine Accessories List: 1 workpiece spindle headstock MK5 1 sine bar without dial comparator 1 grinding spindle headstock with 4 drive pulleys 1 tailstock MK3 1 collet draw system with collet and reducing sleeve B32 1 internal grinding attachment with Fischer quill UJ50x250 – drive pulley Ø 48 for 14,000 rpm 1 rotatable disc dressing device with 50 mm base 1 table rotation stop without comparator 1 coolant system by decantation 1 ejector 1 balancing bar

Būklė: geras (naudotas), cilindrinės šlifavimo staklės Pgjdpotrgukofx Acaep