Cilindrinė šlifavimo mašina

Schaudt PF43 1000/1750

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: Iodjxp Hmaepfx Af Ieal ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Iaedpsw T Sc Nsfx Af Isl Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MGB1320E, centro aukštis: 180 mm, ruošinio svoris (maks.): 100 kg, šlifavimo ilgis: 500 mm, šlifavimo disko skersmuo: 400 mm, bendras plotis: 14 150 mm, bendras ilgis: 18 000 mm, bendras aukštis: 14 750 mm, šlifavimo skersmuo: 320 mm, ruošinio ilgis tarp centrų: 350 mm, šlifavimo ratuko plotis: 50 mm, veleno greitis (maks.): 3 000 aps./min, padavimo ilgis X ašis: 500 mm, padavimo ilgis Z ašis: 150 mm, X ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 1 m/min, bendras svoris: 2 100 kg, ruošinio veleno greitis (maks.): 400 aps./min, Įranga: sūkių greitis be galo kintamas, Beijing No.2 Machine Tool Works (BEIER) Semi-automatic High-speed Cylindrical Grinder MBS1320E Online production equipment; machine testing available; roundness within 0.001 mm Iasdpfx Ajtr Azkjf Isl Manufacturer: BEIER MACHINE TOOL WORKS CO LTD

Gamybos metai: 1979, Sąlyga: paruoštas naudoti (naudotas), Max. Schleifdurchmesser: 300 mm, Max. Schleiflänge: 1.950 mm, Iajdpshq Uigjfx Af Ijl Max. Werkstücklänge: 2.000 mm Max. Vorschubgeschwindigkeit: 1–30 m/min Kühlmittelzufuhr: 100 l/min Stufenlos regelbarer Drehzahlbereich: 2.000–6.000 U/min Spindel: 88 mm Spitzenhöhe: 150 mm Schleifscheiben: 100–250 mm Spindelleistung: 3,5 kW Gesamtleistung Schleifmaschine: 15 kW – 380 V – 50 Hz

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Iajdpfxevnd Suo Af Isl

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Isdpju Nc Emefx Af Ioal Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting

Sąlyga: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Iedjuxfucspfx Af Ieal Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Gamybos metai: 1990, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Tangential Surface Grinder Brand: Jakobsen Model: 1432 Year: 1990 Spindle speed: 1400 rpm Grinding area: 800 x 400 mm Table size: 1000 x 350 mm Maximum table load: 400 kg Maximum workpiece height: 475 mm Wheel size: 350 x 50 x 127 mm Equipped with Heidenhain ND 221B digital readout. Selter electronic magnetic chuck, 800 x 350 mm, with magnetization regulator. Maximum distance between table and wheel: 650 mm Iodpfx Ajiv S Avjf Ieal MONNET brand filter, manufactured in 2007. Includes sets of grinding wheels (see photos).

Sąlyga: naujas, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art. No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Iasdecuntzepfx Af Iol Standard equipment includes: - Horizontal vice - Length stop (600 mm) - Electromechanical monitoring of saw blade tension - Chip removal brush - Coolant device - Operating manual

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 150 mm, bendras svoris: 12 000 kg, gręžimo skersmuo: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Iaodpfx Aewcldajf Iol Technical specifications: Travels: X-axis longitudinal (table): 1800 mm Z-axis transverse (column): 1700 mm W-axis transverse (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Approximate machine weight: 12,000 kg Technical data, accessories, and machine description are not binding. For further technical data, refer to the photos.