Hermann Waldner Gmbh Laikymo Konteineris pirkti naudotą (70 972)

Būklė: naujas, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable legs Version: Single-walled Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished exterior, interior BA (IIId) Internal weld seams: Pickled, passivated, and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Leg height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swing bolt on top, EPDM gasket 1x agitator flange IEC200 3x hemispherical / height-adjustable feet 1x vent valve DN50 stainless steel, non-pressurized, on top 1x DN50 DIN11851 outlet port, central at bottom 1x DN50 DIN11851 port on top with blank cap 1x DN65 DIN11851 port on top with blank cap 2x lifting lugs on top 1x ladder bracket on cylinder 1x nameplate Dsdpow Dy Hlsfx Ahrouw Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 rpm Operating voltage: 3PH 400V - Heavy-duty agitator shaft attached to the agitator motor with a coupling - Agitator shaft dynamically balanced for smooth operation within speed range - 1 dissolver disk Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted on neoprene rubber-metal buffers for vibration isolation

Būklė: naujas, Factory-new stainless steel transport container with anchor agitator Type: SLA1150RWA Volume: approx. 1150L Type: Vertical design with forklift entry base Design: Single-walled, min. 1.5 mm wall thickness Material (media-contacting): 1.4301 stainless steel Surface: Outside satin-finished, inside IIId Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top head: Central traverse with two hinged lid halves Bottom head: Dished bottom with drain sump Container dimensions: Tank diameter: 1190mm Cylinder height: 1000mm Overall height: 1300mm (+ agitator motor) Equipment: - Central traverse with two hinged lid halves, stainless steel grating below the lid as reach-in protection, bolted, removable - Container on stainless steel transport base with forklift pockets - DN50 disc valve outlet fitting DIN1185, EPDM gasket - Nameplate Agitator: Central anchor agitator Dsdjw Dy Ngepfx Ahreuw Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75 kW Speed: 13 rpm Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel - Gearbox manufacturer: Getriebebau NORD - Robust agitator shaft fixed to agitator motor with sleeve coupling, removable - Agitator shaft balanced for concentric rotation within speed range - Space-covering stainless steel anchor agitator element, welded design, welds pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch on vessel, on/off switch, no-voltage release, emergency stop Ready-wired

Būklė: beveik kaip naujas (naudotas), Įranga: Tipinė plokštelė prieinama, Used stainless steel agitator tank on stainless steel pallet with castors and propeller agitator Type: SBPA1000RWP Item number: 10862 Capacity: 907L Type: Vertical design on stainless steel transport pallet with castors Design: Single-walled, min. 2mm wall thickness Contact material: 1.4301 stainless steel Surface: Exterior satin finish, interior BA (IIId) Internal weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central traverse with two hinged lid halves Bottom: Dished end with outflow groove Tank dimensions: Tank diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from outlet to floor: 400mm Leg height: 240mm Equipment: 1x Hinged lid, central traverse with two hinged lid halves, stainless steel grilles below the hinged lid as reach-in protection (removable), latching function (lids can be latched in open position) 1x Spare nozzle DN50 DIN11851 on the top 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, seal PTFE 1x Stainless steel transport pallet 4x Swivel castors, 2x with brake Dedpfx Ajv Ha Uishrouw 1x Nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Manufacturer: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 RPM Operating voltage: 3PH 400V -Robust agitator shaft fixed to the agitator motor, non-removable -Agitator shaft dynamically balanced for concentric running in the speed range -1 mixing propeller Ø 150mm screwed to the end of the agitator shaft. Mixing propeller made of cast stainless steel, high-gloss polished -4x neoprene elastomer-metal buffers, vibration-damped motor mounting, hardness grade 70 Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the tank, On/Off switch, Emergency stop, no-voltage release, and phase reverser Stepless speed control of the agitator motor via a compact, external frequency converter, brand Optidrive. With digital display for frequency or speed. Including potentiometer, On/Off switch. Preprogrammed for agitator operation. Operating voltage 3PH 400V Mounted on the tank with a stainless steel bracket.

Būklė: naudotas, Used stainless steel container / transport container / IBC Previous application: Pharmaceuticals, cosmetics Item number: 10804 Volume: 1,000 liters Type: Vertical, in galvanized stackable frame Contact material: 1.4571 / AISI 316 Manway: 400 mm Design: Single-wall Operating pressure according to nameplate: ATM Container dimensions: Total width: 1,020 mm Total length: 1,220 mm Total height: 1,640 mm Materials: Interior: 1.4571 / AISI 316 Exterior parts: 1.4301 / AISI 304 Fittings: Nameplate: No Dusdpsv Dt Nnofx Ahrew Outlet diameter: DN50 Outlet valve: Disc valve Distance from outlet to floor: 280 mm

Būklė: naujas, Factory-new electrically heated stainless steel agitated mixing tank Article number: EBB150RWAD Volume: 152 L Dimensions approx.: Ø 660 mm x cylindrical height 625 mm Total height: 910 mm Material: 1.4301 stainless steel V2A Finish: matt ground inside and outside Weld seams ground Max. operating temperature: 110°C Tank operating pressure: ATM -Upright design on castors -Top: Central crossbeam for agitator with two hinged lid halves -Bottom: Flat bottom with lateral outlet DN50 DIN11851 and disc valve -Agitator flange nozzle on the top -2x Push handles -1x Nameplate Heating system: Indirect heating Double jacket around the tank filled with glycerin as heat transfer medium. Heating is provided by an electric heating element in the double jacket. Power: 9 kW Operating voltage: 3PH 400V Incl. supply cable with 16A CEE plug Central agitator: Slow-running anchor agitator with wall scrapers Type: SRTGMK/0.37-9.5 Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.37 kW Speed: 0-9.5 rpm Operating voltage: 1PH 230V Product-contacting material: 1.4301 stainless steel -Gearbox and motor in latest aluminum technology, manufactured by Getriebebau NORD -Gearbox with food grade oil fill "Klüber" Dsdpfx Ahjh Hxxfjrsuw -Sturdy agitator shaft mounted to the agitator motor with coupling, removable -Agitator shaft dynamically balanced for smooth running within speed range -1 piece space-filling anchor agitator, weld seams ground, close to wall arrangement -2 Teflon wall scrapers in cylindrical area, 1 at the bottom -Stainless steel flange with shaft seal, EPDM Speed control: Compact frequency inverter on the agitator motor with on/off switch and potentiometer Control: 5 m cable and FI shockproof plug with breaker, undervoltage release Eccentric agitator: Speed-controlled dissolver agitator Type: SRTMKD/1.1-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 1.1 kW Speed: 0-1690 rpm Operating voltage: 3PH 400V Product-contacting material: 1.4301 stainless steel -Motor in latest aluminum technology, manufactured by Getriebebau NORD -Sturdy agitator shaft mounted to the agitator motor with coupling, removable -Agitator shaft dynamically balanced for smooth running within speed range -1 piece dissolver disc Ø 125 mm mounted at the end of the agitator shaft, O-ring seal, EPDM -Stainless steel flange with V-ring seal, EPDM -Stainless steel spacers for motor mounting Speed control: Frequency inverter mounted on the motor, manufacturer Getriebebau NORD. On/off switch, potentiometer, phase inverter Control: CEE plug socket with undervoltage release and phase inverter, emergency stop on the tank

Būklė: geras (naudotas), Used pressure vessel with insulation on castors Item number: 10779 Previous application: Pharmaceuticals Volume: 300 litres Type: Upright on 4 castors Dujdpjrl Rrtofx Ahrsw Wetted material: 1.4571 / AISI316 Design: with insulation Operating pressure (according to nameplate): 0.5 bar Jacket operating pressure: 1.5 bar Max. operating temperature: +95°C Tank dimensions: Manhole: 400 mm External diameter: 830 mm Castor height: 880 mm Total height: 1,720 mm Total width: 1,090 mm Total length: 1,090 mm Materials: Internal: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Features: Nameplate: Yes Outlet diameter: 25 mm Discharge height from floor: 390 mm Empty weight: 184 kg Mobile frame Prepared for agitator

Būklė: beveik kaip naujas (naudotas), Used heatable/coolable stainless steel tank Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Vertical design on three height-adjustable feet Dujdjuy Ribepfx Ahrew Construction: Single-walled with thermoplate Material (media contact): 1.4301 stainless steel (AISI304) Surface: Exterior satin finish, interior BA (IIId) Internal welds: Pickled, passivated, and brushed Max. operating pressure: Atmospheric Max. operating pressure thermoplate: 1.8 bar Max. operating temperature: 95°C Top head: 15° conical top Bottom head: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600 mm Cylinder height: 1500 mm Total height: 2430 mm Equipment: 1x Ø 500 mm manway cover with swing bolt on the top head, EPDM gasket 1x ladder bracket 1x Thermoplate on the cylinder H=900 mm on the cylinder 1x agitator flange connection IEC250 3x dished bases / height-adjustable feet with base plates 1x vent and breather valve DN50 stainless steel, non-pressurized, on the top head 1x DN50 DIN11851 nozzle outlet centrally at the bottom head 1x DN50 DIN11851 nozzle on the top head with blank cap 1x DN65 DIN11851 nozzle on the top head with blank cap 1x name plate

Būklė: labai geros būklės (naudotas), Naudota nerūdijančio plieno talpa Prekės numeris: 10896 Paskutinė naudojimo paskirtis: CIP Dsdsyw Rn Hopfx Ahreuw Tūris: 3300 l Tipas: stovinti ant 3 kojų Medžiaga (sąlytyje su terpe): nerūdijantis plienas V2A / AISI 304 Dugno tipas: Klöpper dugnas Maksimalus darbinis slėgis: atmosferinis Talpos matmenys: Vidinis skersmuo: 1190 mm Išorinis skersmuo: 1200 mm Bendras aukštis: 3450 mm Cilindrinis aukštis: 3000 mm Bendras plotis: 1250 mm Medžiagos: Vidus: 14301 / AISI 304 Išorinės dalys: 14301 / AISI 304 Įranga: Tipinė lentelė: nėra Kojų aukštis: 420 mm Išleidimo angos skersmuo: 37 mm / 37 mm Atstumas nuo išleidimo iki grindų: 160 mm / 500 mm

Būklė: naujas, Gamykloje pagamintas visiškai naujas elektriškai šildomas nerūdijančio plieno maišymo talpa EBB90RWP Įskaitant eksploatacijos instrukciją ir CE atitikties deklaraciją. Dvigubas korpusas užpildytas termo alyva, kurią šildo elektrinis kaitinimo elementas. Galimos ir kitos maišyklių versijos bei skirtingi dydžiai. Talpa: 97 l Matmenys: apie Ø 540 mm x cilindro aukštis 625 mm Bendras aukštis: 910 mm (+ maišyklės variklis) Medžiaga: 1.4301 nerūdijantis plienas V2A Paviršius: vidus ir išorė matiniu šlifavimu Suvirinimo siūlės nušlifuotos Maksimali darbinė temperatūra: 110°C Darbinis slėgis talpoje: atmosferinis -Stacionari konstrukcija ant ratukų -Viršus: atverčiamas dangtis, pusiau prisukamas, pusiau atverčiamas su nerūdijančio plieno apsaugine grotele (išimama) Djdpfxeym Arbj Ahreuw -Apatas: plokščias dugnas su šoniniu išleidimu DN50 DIN11851 ir diskinis vožtuvas -Maišyklės flanšo jungtis viršuje -2x rankenos stūmimui -1x tipinė plokštelė Propellerinė maišyklė Galia: 0,25 kW Apsisukimai: 980 aps./min Darbinė įtampa: 3 fazės, 400 V

Būklė: geras (naudotas), Used insulated stainless steel tank with agitator and double jacket Previous application: Food industry Item number: 10340 Capacity: approx. 6,300 L Type: Vertical, mounted on three legs Product-contact material: 1.4301 / AISI 304 Design: Insulated with double jacket at the bottom Bottom: Flat bottom Top: Dished top Working pressure (nameplate): Atmospheric Dujdpfx Ajd Nap Rshrjw Tank dimensions: Tank diameter: 2,030 mm Cylindrical height: 2,000 mm Distance outlet to floor: 330 mm Leg height: 390 mm Total height: 2,940 mm Overall width: 2,050 mm Materials: Internal: 1.4301 / AISI 304 External: 1.4301 / AISI 304 Features: Manway lid Ø 490 mm Outlet diameter: 40 mm Slow-running agitator Cylinder insulated Bottom with double jacket

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, BA 600-2 CNC, Horizontal Milling and Boring Center SW Schwäbische Werkzeugmaschinen GmbH Travel distances: X-axis: 600 mm Y-axis (swiveling position): 600 (975) mm Z-axis: 500 mm Control: Siemens 840D control system, mounted on the side Feed / Rapid Traverse Speed: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Dedpfx Aszhlfrohrsuw Average Acceleration: X, Y, Z: 2.5 m/s² Measuring System: Direct position measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontally arranged side by side Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working Area: Swivel arm with precision gearing, max. transport load 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. transport load 700 kg, speed 25 rpm Partition wall between machining and loading area Tool Magazine: 2 x 50 tool positions HSK-A 100 chain magazine Tool change time (chip-to-chip) 4.48 sec. Max. tool diameter 100 mm 250 mm with adjacent slot free Max. tool length 420 mm Max. tool weight 20 kg Features: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant filtration with compact band filter Hydraulic unit Maintenance unit Water chiller Fully enclosed, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other: Very good condition Setup during main time (parallel to production) Available from December 2023/January 2024

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Įrenginį sudaro dvi gaubtinės krosnys, maksimali temperatūra: 1100°C, atkaitinimo talpa: 2x 1000 mm, jungimas: trikampis, elektros įvadas: 433A, prijungimo galia: 300kW. Įranga: galios reguliavimas, temperatūros reguliavimas, proceso priežiūra, saugos reguliatorius, avarinio stabdymo sistema, varikliu varomas gaubtų judėjimas, kondicionierius, valdymo spinta ir valdymas. Galima apžiūra vietoje. Dodpszhw Sdefx Ahreuw

Būklė: geras (naudotas), WAGNER UGH-Z1-Q 1000 – bepilotė transporto sistema Parduodami bepilotės transporto priemonės (BTP / AGV) iš pirmaujančio gamintojo „ek robotics“ (anksčiau „ek automation“), sumontuotos ant tvirto „WAGNER“ važiuoklės. Šios transporto priemonės tiesiogiai atkeliavo iš „Mercedes-Benz“ gamyklos, kur buvo naudojamos tiksliam, automatizuotam medžiagų transportavimui. Dėl naudojimo automobilių pramonėje, prietaisai buvo nuolat prižiūrimi, atsižvelgiant į aukščiausius kokybės ir saugos standartus. Vėliau transporto priemonės buvo atnaujintos įdiegus modernius jutiklinius ekranus ir yra puikios, tvarkingos būklės. Šios transporto priemonės sudarytos iš itin brangių, geidžiamų pramoninių komponentų, atitinkančių originalios įrangos kokybės standartus. Profesionalūs saugos lazeriniai skaitytuvai: aukštos klasės jutikliai, skirti aptikti žmones ir kliūtis. Puiki galimybė logistikos įmonėms, kaip aukštos kokybės atsarginių dalių šaltinis esamoms sistemoms, dalių perdirbėjams arba ambicingiems automatizavimo projektams. Techniniai duomenys Važiuoklės gamintojas: WAGNER Fördertechnik GmbH & Co KG Modelis / Tipas: WAGNER UGH-Z1-Q 1000 Duodpfx Aozklktohrew Nominali apkrova: 1000 kg Bendras svoris (įskaitant akumuliatorių): 2980 kg Sistemos įtampa: 48 V „Viskas iš vienų rankų: mielai pasiūlysime jums tinkamą banko finansavimo planą jūsų projektui.“ komplett-konzept.leasingo.de Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo išlaidos nurodomos atskirai!

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8843, garantijos trukmė: 12 mėnesiai, Savybės: – Tinkamas pjovimo įrenginys, priklausomai nuo paskirties – Stiprintas iškrovimo konvejeris – Paruošta montavimo vieta magnetiniam separatorui – Plokščias dugnas ant vikšrų važiuoklės Dedszkha Djpfx Ahrsuw – Iškrovimo konvejerio greičio reguliavimas – Dulkių nusėdimas

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM10 Djdjyc U Ugepfx Ahreuw Force: 10 kN Crosshead stroke: 700 mm Test space: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Position resolution: 0.01 mm Test speed: 1–500 mm / min Return speed: 700 mm / min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” even without a PC. For tests that require data storage and curve recording, our basic software enables control and evaluation. This allows you to generate various test sequences and create a test report. You also have the option to further process the raw data in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM10 Force: 10 kN Crosshead Travel: 700 mm Dsdpjd R Dpmefx Ahrsuw Test Space: 400 mm Total Height: 1230 mm Weight: approx. 85 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 10 kN incl. Evaluation Electronics and Basic Software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for quick tests without the need for a PC. For tests requiring data storage and recording of the test curve, our basic software provides control and evaluation capabilities. This enables you to generate various test sequences and create a test protocol. Additionally, you can further process raw data with your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration in accordance with DIN EN ISO 7500-1 - Grips & Fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips and hydraulic grips.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM5 Force: 5 kN Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1036 mm Weight: approx. 48 kg Travel resolution: 0.01 mm Dodpfx Asydanhehreuw Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 5 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without the need for a PC. For tests requiring data storage and curve recording, the included basic software provides control and evaluation capabilities. This enables the generation of various test sequences and the creation of test reports. You also have the option to further process raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 2025, būklė: naujas, Universal Testing Machine PM50 Force: 50 kN Traverse stroke: 1200 mm Test area clearance: 400 mm Overall height: 1817 mm Weight: approx. 380 kg Position resolution: 0.01 mm Test speed: 0.03–1000 mm/min Return speed: 1000 mm/min Load cell: 50 kN Including evaluation electronics and basic software. Djdpfxoydazus Ahrouw Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, the basic software enables both control and data analysis. This allows you to generate various test procedures and create test reports. Additionally, there is the option to further process raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PM3, Universal Testing Machine PM3 (2026) Force: 3 kN Traverse Stroke: 520 mm Working Area Depth: 66 mm Overall Height: 1036 mm Weight: approx. 40 kg Travel Resolution: 0.01 mm Test Speed: 1–500 mm/min Return Speed: 700 mm/min Load Cell: 3 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick tests" to be performed without a PC. For tests requiring data storage and curve recording, our basic software provides control and evaluation capabilities. This allows you to generate various test sequences and create a test report. Furthermore, you can export raw data for further processing in your own software. Duodpfxoyc U Dbs Ahrsw Optional: - Delivery and commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending fixtures, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Universal Testing Machine PM3 Force: 3 kN Crosshead travel: 1200 mm Working area depth: 66 mm Overall height: 1677 mm Weight: approx. 55 kg Displacement resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 3 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode via a numeric keypad, allowing for "quick testing" without the need for a PC. For tests that require data storage and curve recording, our basic software provides control and evaluation functions. Djdpjyc U Rbsfx Ahrouw This enables the creation of various test routines and automated test reports. Additionally, you have the capability to export raw data for further processing in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips & fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Test space depth: 66 mm Overall height: 1036 mm Weight: approx. 40 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 3 kN Incl. evaluation electronics and basic software. Dodpfx Ajfdzupjhrjuw Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for quick tests even without a PC. For tests that require data storage and curve recording, our basic software provides the option for control and evaluation. This enables the creation of various test workflows and the generation of test reports. Raw data can also be further processed in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Test fixtures: Compression plates, bending devices, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 2025, būklė: naujas, Universal Testing Machine PM50 Force: 50 kN Traverse stroke: 1200 mm Test area clearance: 400 mm Overall height: 1817 mm Weight: approx. 380 kg Position resolution: 0.01 mm Test speed: 0.03–1000 mm/min Return speed: 1000 mm/min Dusdpfx Asd R Dp Eehrjw Load cell: 50 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for "quick testing" without the need for a PC. For tests requiring data storage and curve recording, the basic software enables both control and data analysis. This allows you to generate various test procedures and create test reports. Additionally, there is the option to further process raw data in your own applications. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM3 Force: 3 kN Crosshead Travel: 520 mm Working Depth: 66 mm Total Height: 1036 mm Weight: approx. 40 kg Displacement Resolution: 0.01 mm Test Speed: 1–500 mm / min Return Speed: 700 mm / min Load Cell: 3 kN Including evaluation electronics and basic software. Our testing machines are fully operable in stand-alone mode via a numerical keypad, allowing for quick tests without requiring a PC. For tests that require data storage or the recording of load curves, the basic software enables control and evaluation. The software allows you to create various test routines and generate a test report. Additionally, it provides the option to export raw data for further analysis in your own programs. Djdpfxed R Dpuj Ahrouw Optional features: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Clamping tools: Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Universal Testing Machine PM5 Force: 5 kN Crosshead travel: 520 mm Working depth: 66 mm Overall height: 1036 mm Dujdpfx Asd R Dqbshrew Weight: approx. 48 kg Travel resolution: 0.01 mm Test speed: 1–500 mm/min Return speed: 700 mm/min Load cell: 5 kN Includes evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” without the need for a PC. For tests requiring data storage and curve recording, the included basic software provides control and evaluation capabilities. This enables the generation of various test sequences and the creation of test reports. You also have the option to further process raw data in your own programs. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Compression plates, bending devices, shear fixtures, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pildymo angos plotis: 1 400 mm, bendras plotis: 4 950 mm, bendras aukštis: 4 443 mm, bendras ilgis: 8 093 mm, įvesties srovės tipas: trifazis, eigos ilgis: 60 mm, For sale is a used, but technically well-maintained machine that was in reliable operation until the end of June 2024. The machine is in ready-to-operate condition and is ideally suited for immediate reuse or as a solid foundation for custom modifications. Technical Features & Equipment: Modern belt feeder The machine is equipped with a contemporary belt feeding system, ensuring efficient and precise material input. Drive couplings with sleeve-type bushings Robust sleeve-type bushings in the drive couplings provide reliable power transmission—easy to maintain and durable. Large couplings, latest specification The machine is already fitted with the large couplings according to the latest machine version, offering additional stability and performance. Standardized compactor units Installed compactor units conform to current industry standards and guarantee consistent and powerful processing. Kneading rollers – good profile, used condition The kneading rollers are in used but fully functional condition with a good profile. Conveyor belts – used but in good condition The conveyor belts show signs of age-appropriate use but remain operational and in good condition. Dujdpjwzkuzjfx Ahrjw Note: The Makrolon inspection windows should be replaced as they show wear due to age. The machine is currently dismantled but can be inspected. This machine offers an excellent combination of reliability and up-to-date technology, ideal for businesses looking for a proven solution with modern equipment features. If you have any questions or would like to arrange a viewing appointment, please contact us.