Dulkių Ištraukimo Įrenginys Alko Power Unit 120, 2013 M. pirkti naudotą (111 525)

Būklė: naudotas, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Rated load capacity: 1500 kg Tested lifting capacity: 1000 kg (at approx. 350 bar) Platform size: 2100 x 1400 mm Itsdpfx Ajl Nbqcelreh Lift stroke: max. 930 mm Installation height (lowered): 100 mm (with installation frame) Installation height (raised): 1030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1000 kg Hydraulic motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop the lowering operation when the safety bar is triggered - Without hydraulic power unit - Without electrical control Installation frame length: 2270 mm Installation frame width: 1580 mm Installation frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition

Būklė: naudotas, Pneumohydraulic Cylinder TOX Pressotechnik Hydro-pneumatic press unit, Power Package Model: S 04.00.050.12 D Serial No.: 208696.460 Year of manufacture: approx. 2000 Press force: 4.0 t at 10 bar Press force: 3.0 t at 8 bar Press force: 2.6 t at 7 bar Press force: 2.4 t at 6 bar Press force: 2.0 t at 5 bar Press force: 1.6 t at 4 bar Press force: 1.2 t at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Piston rod thread: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with digital display TOX for force measurement, Type 167282 - Total height of power package with piston rod = 610 mm - Total height of hydro-pneumatic cylinder power package = 560 mm - Additional base plate 160 x 160 x 20 mm Iedpfeu D Tz Uex Alreth - Ram plate: Ø 68 mm Required space (L x W x H): 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 units available, price per unit

Būklė: naudotas, Hydraulic Power Unit, Low-Noise Type BOSCH REXROTH Hydraulic Power Unit Model UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Serial No. R904100893 / 480933 10 Year of manufacture: approx. 2010 Operating pressure: 55 bar Flow rate: 13 L/min Tank capacity: approx. 20 litres Iodev Ev Dqepfx Alrsth Motor power: 1.5 kW Speed: 1440 rpm Power supply: 400 Volt, 50 Hz - Unit was previously used at an operating pressure of approx. 80 bar - 1 piece hydraulic pump, vane-type BOSCH REXROTH, model PV7-11/06-10RA0MA0-10, max. pressure 100 bar - 1 piece air-oil cooler, fan-cooled via electric motor driven by the hydraulic pump - Hydraulic manifold BOSCH REXROTH, model UPES-11/ ABZSS6-C-140E-S30-S13 - 2 pieces hydraulic accumulators - 1 piece exchange filter cartridge - 1 piece pressure sensor IFM, model TR7 430 - 1 piece oil sight glass - Hydraulic connections 2x 18L - Oil not included in delivery Required space (L x W x H): 700 x 450 x 850 mm Weight: 105 kg Very good condition

Būklė: naudotas, Filtration system, extraction unit, clean air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year built 12 / 2004 Rated air volume 1451 m³/h Negative pressure 1398 Pa Filter area 18 m² Extraction inlet Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning by oscillating motor - 2 discharge pipes underneath for dust collection sacks, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose coupling, fire brigade coupling for filter fires - Differential pressure switch for filter contamination detection - Without control unit (no controller included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as per photos 3050 mm Ijdsr R Ewlopfx Alreth Footprint L x W 1850 x 1000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1199, bendras svoris: 800 kg, tūrio srautas: 5 000 m³/val, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, Siūlome šį naudotą WOLF CKL-A-5800 re tiekimo ir ištraukimo oro įrenginį su Mitsubishi oro kondicionieriumi bei visais esamais vamzdynais, pagamintą 2019 metais. Gamintojas: WOLF Modelis: CKL-A-5800 re Itjdpfjzb Itgjx Alroh Metai: 2019 Jeigu turite klausimų arba reikia daugiau informacijos, rašykite mums žinutę arba paskambinkite.

Gamybos metai: 1996, būklė: naudotas, Riedama drožlių ištraukimo sistema aliuminiui arba PVC Itsdpfxoy Tanho Alrjh

Būklė: naudotas, Gamintojas: Kuderer Maschinenbau GmbH Modelis: AZ-2 Metai: 1992 Juostinis šlifuoklis Bendri matmenys: 1000 x 440 x 1080 mm Juostos dydis: 150 x 1440 mm Galia: 1,5 kW Ištraukimo įrenginys Ijdpfx Asy N Nw Relrsth Bendri matmenys: 560 x 560 x 690 mm

Gamybos metai: 1991, būklė: geras (naudotas), Dust extractor, welding fume extractor, filter ventilation, self-cleaning pneumatic negative pressure dust collector, extraction unit for plasma, laser, sandblasting, and all types of dry dust. Donaldson Torit model: 3DF18 Cyclo with pre-separator. Cartridge filter elements pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. The fan is installed behind the filter on the clean air side, minimizing the risk of explosion. Cartridge filter elements. Fan power: 7.5 kW Capacity: 6,000 m³/h Negative pressure: 3,000 Pa Filtration surface: 378 m² Inlet diameter: 350 mm Itedpjmrm Rajfx Alrjh Ultra WEB cartridge filters – 18 pieces.

Būklė: naudotas, rida: 199 500 km, galia: 185 kW (251,53 AG), pirmoji registracija: 06/2014, kuro tipas: dyzelinas, bendras svoris: 11 990 kg, spalva: mėlyna, pavaros tipas: mechaninis, emisijos klasė: Euro 5, krovinio erdvės tūris: 11 m³, krovimo vietos ilgis: 7 120 mm, krovinių skyriaus plotis: 2 510 mm, krovos erdvės aukštis: 600 mm, Gamybos metai: 2014, Įranga: ABS,

Būklė: naudotas, Gamybos metai: 2011, Perfect Binding Line Kolbus KM 600 Year of manufacture: 2011 Comprising: Gathering Machine Kolbus ZU 804 Ijdsy Uvfrjpfx Alrsth Description: - Manual feed station - Number of gathering stations: 20 - Optical signature detection: Sygna-Lynx - Air center: Becker - Setup module - Reject delivery for incomplete products Perfect Binder Kolbus KM 600 Production counter: approx. 12,800,000 Description: - Semi-automatic adjustment - Co-Pilot with touchscreen - Number of clamps: 21 - Main milling station - 1st spine processing station - 2nd spine processing station - Brushing station - Excluding dust extraction; machine was connected to a central dust extraction system - Drive unit for spine gluing system - Hotmelt spine gluing system, replaceable - Premelter for spine gluing system: LH 375 - Drive unit for side gluing system - Hotmelt side gluing system, replaceable - Cover feeder: RA 49.A - 1st pressing station - 2nd pressing station - Book delivery device (to the left) Conveyor System Kolbus - Transport system, length (approx.): 20 m - Emergency delivery station Three-Knife Trimmer Kolbus HD 143.P Year of manufacture: 2011 Production counter: approx. 12,570,000 Description: - Co-Pilot with touchscreen - Infeed belt from the right - Automatic loading magazine for inline production - Cut counter - Product counter - Knife pre-setting device - Number of knife sets: 2 - Interchangeable cutting cassettes (standard set) The photos also show a side stitching unit, which is mainly used for the production of schoolbooks for the Middle East. This unit is not included in the offer price but is available as an option for an additional charge upon request.

Būklė: naujas, 2 vnt. Michaelis valdikliai Itsdpezaalrofx Alreh

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 80 h, Funkcionalumas: visiškai funkcionalus, Beveik kaip nauja kartoninių dėžių grupavimo ir vyniojimo mašina. Pirkta didelių picų dėžių pakavimui rietuvėmis, šiuo metu nustatyta pakuoti po penkias arba šešias. Naudota tik kelias savaites dėl sutarties pasikeitimo. Ijdpfx Asx Alcgelrjth

Būklė: naudotas, Gamybos metai: 2013, Overview This complete brewhouse was manufactured between 2011 and 2013 by various European producers, including the Spanish manufacturer SlowBeer. It is offered for sale because the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical Data Brewhouse capacity: 250 liters per batch Production cycle: approx. 2 weeks per batch Bottling cycle: 1 day per batch Production months/year: 10 months Beer shelf life: 18 months Heating method: Electric (one hot liquor tank in use), butane option available (unused) Fermentation tank capacity: 500 liters each (3 tanks) Brewhouse power: 15 kW Cooling system power: 2.3 kW Labeller power: 2 kW Scope of supply 1 x Brewhouse | SlowBeer | MB 250 E | 2013 1 x Plate heat exchanger | Sondex Italia | S4A-IG16 | 2013 3 x Fermentation tanks | - | - | - (each 500 L, atmospheric) 1 x Chiller | Winus | C2-W3R 4T | 2012 1 x Isothermal hot water tank | Industrias Céspedes | - | 2011 1 x Labelling machine | CDA | R1000 | - 1 x Filling machine | Toscana | - | - 1 x Manual capping machine | - | P0085 | - 1 x Coder | - | MC150V | 2013 1 x Electric mill | SOMMER | 11717 | - 1 x Compressor | FINI | - | - 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) 1 x Steel water heating tank | - | - | - (900 L) 2 x Water softeners | - | - | - 2 x Hot water tanks | - | - | - (1 electric, 1 butane-powered - unused) Optional services: Dismantling, transport, and installation available on request. Itsdpfxswcyc Dj Alrsh

Būklė: naudotas, Gamybos metai: 2004, Overview This labelling machine was manufactured in 2004 by the German company GERNEP. The model Labetta 4/3/12 784 2A 3SK is equipped with two wet glue labelling stations and three self-adhesive labelling stations, offering flexible labelling configurations for a wide variety of bottle types. The machine has a capacity of 8,000 bottles per hour and is available immediately. Technical Data Capacity: 8,000 bottles per hour (6,500 bottles per hour with photoelectric orientation) Number of bottle plates: 12 Number of labelling stations: 5 Station 1: Wet glue, label height 330 mm, steel glue roller Station 2: Wet glue, label height 230 mm, steel glue roller Stations 3-5: Self-adhesive Orientation: Photoelectric bottle orientation via closure Ijdpfx Aljwh U D Tjrjth Prepared for cam-based bottle orientation Electric height adjustment Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-200, Touch TD integrated Rotation direction: Right to left Scope of delivery GERNEP Labetta 4/3/12 784 2A 3SK labelling machine Integrated control system (Siemens S7-200 with Touch TD) Machine protection housing with hinged doors and lifting gates

Būklė: naudotas, Gamybos metai: 2001, Apžvalga Rankenos aplikatorių 2001 m. pagamino Vokietijos įmonė project Automation & Engineering GmbH. Jis iki neseniai buvo didelės Vokietijos gaiviųjų gėrimų gamintojos PET išpilstymo linijos dalis. Rankenų aplikatorius dabar laisvai prieinamas. Techniniai duomenys Bendras našumas: 70 ciklų/min Elektros jungtis: 400 V/N/PE/50 Hz, 3,6 kW Dvi juostos Papildoma informacija Galima butelio galiojimo datos žymėjimo sistema (Videojet Excel 170i Ultra High Speed) Pakuočių konvejeris galimas Iedpfx Aloy Sccfjroth

Būklė: naudotas, Ištraukimo antgalio skersmuo: 160 mm Itjdsyi Ht Uspfx Alrsh Variklio galia: 1,5 kW Matmenys (ilgis/plotis/aukštis): 1.220 x 650 x 3.270 mm Mobilus ištraukimo įrenginys su didele filtro plokštuma ir vamzdžių komplektu mažai dirbtuvėlei.

Gamybos metai: 2024, būklė: naujas, Overview – of the various configurations *not every position is needed: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net Itsdeff Sbispfx Alrjh *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length

Gamybos metai: 2022, būklė: naudotas, Spalva: Sidabrinė Tuščias svoris: 800 kg Matmenys (I x P x A): 480 x 200 x 240 cm - Pagaminimo metai: 2022 - Dokumentacija prieinama: Ne Isdpfx Aoy Tlpkelrsth - CE ženklinimas: Taip - CE sertifikatas: Ne - Serijos numeris: 4329 - Tinka medžiagai: Medienos dulkės - Ištraukimo tipas: Vakuuminė instaliacija - Pagrindinių ventiliatorių kiekis [vnt.]: 2 - Pagrindinio ventiliatoriaus galia [kW]: 7,5 - Filtrų maišų kiekis [vnt.]: 5 - Filtro ilgis [mm]: 1100 - Filtro diametras [mm]: 520 - Filtravimo plotas [m²]: 9 - Jungties diametras [mm]: 520 - Jungčių skaičius [vnt.]: 5 - Transportavimo matmenys: 4800mm x 2000mm x 2400mm (i x p x a) - Transportavimo svoris [kg]: 800kg - Transporto paketų kiekis [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir priėmimas galimi bet kuriuo metu visiems pramonės įrenginiams Yorick Diebels

Būklė: naudotas, Ex-protected filtration system, extraction unit, central cartridge pulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter unit, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 – as new, unused Airflow: 3300 m³/h Airflow: 0.9 m³/sec Filter area: 20 m² (1 cartridge filter) Differential pressure: 3300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust air connection at filter outlet: soundproof hood Compressed air connection: approx. 8 bar Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Explosion-proof design ATEX II 2Db 125°C / 3G T4 Itsdpjy N Duqjfx Alrsh - Pneumatic rotary filter cleaning, manually operated via push button - Manometer for differential pressure display (vacuum indication in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm, P-RIES type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (soundproof hood) fitted with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Radial fan mounted inside at the top, type IE 3-Premium Efficiency, 12% improved efficiency - Robust steel construction, RAL 7035 light grey, antistatic powder-coated - Dust collection container: pull-out drawer approx. 70 liters (440 x 530 x 300 mm) - EC Declaration of Conformity, operating manual with electrical diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight (extraction unit): 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight with transport pallet: 236 kg As new, unused, from stock

Būklė: naudotas, Gamybos metai: 2013, bendras aukštis: 2 100 mm, bendras ilgis: 9 000 mm, bendras plotis: 1 050 mm, Weight: 6,000 kg Price: On request - Special features: - Description: Not functional – several sensors are loose and the glue tank has been dismantled; the machine has not yet been tested - Year of manufacture: 2013 - Documentation available: No - CE certificate available: No Isdpfx Aloyrp Uasreth - Serial number: - Number of units: 9 - 1st unit type: Pre-milling unit - Tools included: Yes - 2nd unit type: Gluing unit - Type/brand: Nordson - 3rd unit type: Pressure rollers - Tools included: Yes - 4th unit type: End trimming unit - Tools included: No - 5th unit type: Rough trimming unit - 6th unit type: Milling unit - 7th unit type: Fine trimming unit - 8th unit type: Milling unit - 9th unit type: Milling unit - Tools included: Yes - Glue system: Glue pot - Voltage [V]: 400 - Power consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9,000 mm x 1,050 mm x 2,100 mm (L x W x H) - Transport weight [kg]: 6,000 kg - Number of transport packages: 4 Financial information VAT: The stated price is net, excluding VAT VAT/Profit margin scheme: VAT is deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, spaudimo jėga: 4 000 kN, Įranga: dokumentacija / vadovas, Valdymas: CC200 Metai: 2013 Uždarymo jėga: 400 t Maks. įrengimo aukštis: 1450 mm Formos aukštis min.-maks.: 450-1000 mm Išstūmiklio eiga: 250 mm Sraigto skersmuo: 70 mm (S8 varžtas. G1) Įpurškimo tūris: 1501 cm3 Įpurškimo greitis: 319 cm3/s Specifinis įpurškimo slėgis: 2252 bar Maksimali sraigto apsukų dažnis: 160 aps./min Tipas: Horizontalus Pavara: Hidraulinė 2 branduolių traukikliai 16 formos kaitinimo zonų Itodpfxsyctyze Alrsh 12 vandens kontūrų Euromap 67 ECODRIVE ORO VOŽTUVAI

Būklė: naudotas, Gamybos metai: 2009, mašinos/transporto priemonės numeris: A0911001, Dulkių valymo šepetys su spiraliniu šepečiu, statmenai ruošinio judėjimo krypčiai, tinkamas montuoti ant esamos transportavimo sistemos. - Gamintojas: Venjakob - Pagaminimo metai: 2009 - Aukščio reguliavimas rankiniu ratu - Detalių aukštis nuo apie 0 iki 200 mm, priklausomai nuo montavimo konsolės tipo - Darbinis plotis: 1.300 mm - Bendras šepečių agregato plotis: 2.270 mm - Reikalinga išorinė ištraukimo sistema - Ištraukimo jungtis 2 x 120 mm - Oro srautas apie 2.000 m³/h - El. galia 1,5 kW - Voltai/Hz: 400/50 - Mašina be valdymo spintos ir dažnio keitiklio (galima užsakyti papildomai) Itjdpfx Ajuulpqolreh - Be ritininio konvejerio, tik šepečių mašina (galima užsakyti papildomai) Šepečių aprašymas: Arklio plaukas, 2x 4 eilių, spiralės formos nuo vidurio į išorę. 2 spiralės po 520 mm žingsniu, priešpriešinės. - Šepečio ilgis 1.340 mm - Šepečio skersmuo 250 mm - Sandėlyje Blomberge

Būklė: geras (naudotas), Sandėlio numeris: 3108 Gamintojas: TEKA Pagaminimo metai: 2012 Darbo valandos: 5.618 h Tipas: Strongmaster IFA Itedpfjy T Uxnex Alrjh Numeris: 6907210061062 Oro srautas: 3.000 m³/h Ištraukimo strėlė apie: 3.000 mm Įranga: mobilus Priedai: naujas filtro elementas Jungtis: 1,1 kW 400 V Svoris: 160 kg Matmenys: 800 x 800 x 1.500 mm be žarnos Žarnos ilgis: apie 4.000 mm

Būklė: naudotas, Gamybos metai: 2020, veikimo valandos: 14 500 h, mašinos/transporto priemonės numeris: M335, Used SIG Filler Combibloc 26,500 BPH – Year of Manufacture 2020 Technical Specifications & Performance Data This aseptic carton filling monoblock is engineered for highly efficient beverage production and industrial packaging applications. Manufactured by SIG Combibloc, it combines robust aseptic technology with modern upgrades to increase throughput. This pre-owned high-performance unit can be seamlessly integrated into a used filling or packaging line, supporting rapid changeovers and consistent output quality. Line Details | Line | Volume | Speed | Equipment Description | Year | |-----|-----|-----|----- |-----| | SIG-A HMR ~ | 65ML, 125ML, 200ML | 26,500 | H2O2 SYSTEM-LK-57VC-02-2022 | 2022 | | | | | COMBIBLOC FILLER-871251055-2020 | 2020 | | | | | FILLER SPEED UP CONVERSION KIT-SIG | 2024 | | | | | STEPPER MOTOR FILLER SPEED UP CONVERSION KIT| 2024 | Manufacturer: SIG Combibloc Machine type: Aseptic carton filling monoblock Isdpfx Ajy Uc Tvjlrjth Year of manufacture: 2020 Production speed: up to 26,500 units/hour Supported formats: Compatible with 0.065L, 0.125L, 0.2L carton sizes Container types: Designed for carton handling Aseptic technology: H2O2 sterilization system (commissioned in 2022) Upgrades: Filler speed-up conversion kit and stepper motor conversion kit (installed 2024) Operating hours: approx. 14,500 Mode of operation: Linear monoblock configuration Advanced Automation & Control Systems The monoblock integrates advanced automation functions to stabilize performance at higher speeds and minimize operator intervention. The speed-up conversion kit and the 2024 stepper motor upgrade enhance dosing accuracy and acceleration profiles, enabling smoother start-ups and reduced cycle times. Integrated controls offer recipe-based format changes, fault diagnostics, and production data transparency. Safety interlocks and clear HMI prompts contribute to predictable availability and simplified operation. Line Integration Capabilities Designed for flexible integration into a complete packaging line, this aseptic filler can operate in-line with carton forming, top application, conveyors, and end-of-line equipment. It is an excellent choice for modernization projects or to expand a used filling or packaging line. Changeovers cover common single-serve to small multi-serve carton sizes, allowing for efficient SKU rotation without extensive mechanical reconfiguration. The linear design supports straightforward connection to upstream and downstream packaging machinery.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, galia: 11 kW (14,96 AG), tūrio srautas: 8 000 m³/val, nominali srautas: 6 950 m³/val, neigiamas slėgis: 2 630 Pa, H 3 "GS dust-tested" Extraction connection 350 mm Ø Pneumatic JET filter cleaning Extinguishing system with powder extinguisher With rotary airlock valve Ijdpfx Aewty Uzelroth