Pressta Eisele Pv 8 Kampinių Jungčių Presas pirkti naudotą (45 210)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 410 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: Kdedpfx Alezdnxgsdjn The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: geras (naudotas), Scope of delivery includes: 01x Mounting bracket, used Surface: hot-dip galvanized Weight: 2.26 kg | each Mounting plate: 100 x 120 x 10 mm ( with 4 round holes Ø 10 mm ) Kodpfxoi A Ik Ie Aldjdn Mounting flange: 120 x 140 x 10 mm ( 1 slotted hole 62 x 15 mm )

Būklė: naujas, The delivery includes: 01x Platform beam, new Manufacturer: SSI Schäfer Design: Corner joint / 90° Suitable for CS Sigma profiles With a profile height of 300 mm Type of fastening: internal bolted connection Material finish: Sendzimir galvanized Technical data for the platform beam: Dimensions: approx. 140 x 275 x 105 mm (D x W x H) Kdedpfx Alomv Dyzodjn Hole spacing (outer): approx. 250 mm Hole spacing (inner): approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Būklė: naudotas, Hydraulic Notching Machine with Adjustable Angle SIMASV Type AV 220-6PA Serial No. C1524 Year of Manufacture: 1996 Blade Length: 220 mm Material Thickness (Steel): 6 mm Material Thickness (Stainless Steel): 4 mm Kdedpfx Ajrzfh Hsldjn Table Dimensions: 950 x 790 mm Table Height: 940 mm Motor Power: 3 kW Power Supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (left and right) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable back gauges with degree scale - Multiple mm measuring scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Būklė: naujas, Gamybos metai: 2024, Are you looking for a high-performance press brake that can handle even the most demanding requirements? Then the Durma AD-S 803000 press brake with a pressing force of 3,000 tons could be the perfect solution for your needs. With an impressive bending length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1,000 mm allows for flexible and convenient positioning of the workpiece. At the heart of the machine is the movable DELEM DA-66T control unit, which ensures intuitive operation and precise management of the work process. Additionally, this press brake is a special custom-made model and can be configured to meet all individual customer requirements. Kdodoi Da Syspfx Aldon If you're interested in the Durma press brake, we are happy to provide you with a personal consultation. Other machines are also available and can be viewed upon request. Please feel free to contact us for further information and let us find a tailor-made solution for your requirements together. Control Type: DELEM DA-66T Protective Oil: Suitable for sea transport Front Safety System: FPSC (Manual) Sheet Support Systems: Movable support arms Stroke: 750 mm Backgauge Type: X=1500 X, R Throat Depth: 1,050 mm Crowning: Hydromechanical Installation Height: 1,000 mm Power Supply: 400V 50Hz Frame Type: Welded frame construction Bottom Tool Holder: DURMA wide

Būklė: nepatikrintas (naudotas), chain testing device Kjdpfx Ajix Nilsldjdn

Būklė: labai geros būklės (naudotas), 12 mm skersmens laiptelių štampavimo presas naudotas, puikios būklės Gamintojas Jeyden 12 mm laiptelių peilis dešinėje pusėje atraminis stalas su ribotuvu Reikalinga vieta apie 1100 mm x 600 mm x 1100 mm Svoris apie 65 kg Kjdpfxeyza Ans Aldsdn Sandėliavimo vieta: 54634 Bitburg, pakrautą, ne supakuotą Pardavimas esamos būklės, kaip apžiūrėta, be garantijos ir pretenzijų

Būklė: geras (naudotas), Gamybos metai: 2011, įėjimo įtampa: 230 V, Kampinis presas su suspaustu oru. Peiliai, skirti Reynaers sistemoms, įtraukti. Kdjdpfey Twnxjx Aldsn

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, bendras svoris: 450 kg, įėjimo įtampa: 230 V, Mašina buvo naudojama maždaug 8 valandas per savaitę. Yra visi reikalingi priedai (peiliai), skirti Reynaers sistemoms. Ksdsy Twlqopfx Aldsdn

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, bendras svoris: 450 kg, įėjimo įtampa: 230 V, Mašina beveik nenaudota. Aprūpinta visais reikalingais priedais (peiliais) Reynaers serijoms. Kdjdpfx Aley Tv Rlodjn

Būklė: naudotas, Techniniai duomenys: Kjdpfeyv Atrox Aldjdn Klijuojamo elemento maks. matmenys: 1600 x 3000 mm 3 vertikalūs spaustuvai 2 horizontalūs spaustuvai Hidrauliniai spaustuvai Maitinimas: 400 V Variklio galia: 1,5 kW Variklio apsukos: 1450 aps./min Bendri išmatavimai: Ilgis: 1200 mm Plotis: 3500 mm Aukštis: 2500 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, spaudimo jėga: 160 t, stalo ilgis: 3 500 mm, bendras ilgis: 4 650 mm, bendras plotis: 1 650 mm, bendras aukštis: 2 550 mm, bendras svoris: 6 000 kg, darbinė temperatūra: 130 °C, atidarimo plotis: 480 mm, plokštės plotis: 1 300 mm, temperatūra: 130 °C, Įranga: karštas vanduo, ORMA Shelf Press NPL-8-160 Specification: • Condition – used, fully serviced • Manufacturer – ORMA • Model – NPL-8-160 • Shelf dimensions: 350 x 130 cm • Max clearance between shelves: 480 mm • Shelves are flat, clean, without dents/damage • 8 pistons with 85 mm diameter • Max pressure: 350 bar • Max pressing force: 160 tons • Option to operate using only the central pistons (for short workpieces) • Automatic pressure compensation • Glueing timer with automatic shelf lowering • Shelves suitable for water/glycol or oil heating • Circulation pump and heating boiler included • Max heating medium temperature: 130°C • Equipped with a safety cable (emergency stop system) • Original paintwork, all parts original Kedpoxdxwajfx Aldedn • Weight ~ 6000 kg • Year of manufacture: 1991 • Overall dimensions: 465 x 165 x 225/255 cm (L x W x H / H with expansion tank) Additional information: • Perfect, factory technical condition • The presented photos reflect the actual item for sale • Possibility to power up and inspect the machine on site

Būklė: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: M08E/7120, Pasiūlymo numeris: M08E/7120 Mašinos tipas: 8 matricos – 8 smūgių presas Informacija: uždaras peilis Kdedpfx Aljwi Tapodon Gamintojas: LACHAUSSEE Modelis: Fo 10 - 712 Pagaminimo metai: 1984 Skersmens diapazonas: 6,5 mm Matricų skaičius: 8 Pakopų skaičius: 9 Ruošinio ilgis: 6-10 mm Stūmos eiga: 123 mm Galingumas - vnt./min: 150 Vieta: Europoje

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 160 t, eigos ilgis: 200 mm, stalo plotis: 750 mm, stalo ilgis: 1 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric presses are a type of mechanical press, powered via an eccentric mechanism, used in cold forming operations such as punching, cutting, and die forming. H type (straight-side) eccentric presses deliver high stability and process safety thanks to their rigid frame construction. The CRONOSSTECH CEHP-TB-160 – H Type Eccentric Press, 160 Ton, is designed for stable operation in high-volume production, focusing on die protection and operator safety. Its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure provide reliable performance suitable for continuous production environments. Key Advantages - Stable and repeatable production thanks to a 1100×750 mm table size - Die/equipment protection through hydraulic overload safety - Controlled and user-friendly operation with PLC + touch screen - High operator safety ensured by light curtain safety system - Low maintenance required due to automatic lubrication Applications - Punching / cutting / die forming operations - Mass production with automatic feed lines - High-volume production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • T-slotted extra top plate • 8-guided ram • Adjustable stroke on single connecting rod • Ram equipped with counter-balance piston • Fully automatic fine lubrication system • PLC control system Kedjx N Sblepfx Aldedn • Piano-type control panel • Touchscreen LCD display • Reverse-motion motor • Hydraulic overload protection • Motorized ram adjustment system • Light curtain safety barrier • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeder systems • Scrap material ejection systems • Sliding safety cover at the front of the table • Custom die options upon request ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-160) - Capacity: 160 Ton - Table-Ram Distance: 500 mm - Housing Width: 1130 mm - Ram Adjustment: 120 mm - Press Width: 2700 mm - Press Depth: 2200 mm - Press Height: 4600 mm - Table Dimension: 1100×750 mm - Ram Face Size: 1100×750 mm - Stroke (Fixed): 200 mm - Motor Power: 22 kW - Weight: 18,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are handled by CRONOSSTECH.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1997, Italpresse SP 30-8 Case Clamp Year of manufacture: 1997 Kodohwwnrspfx Aldedn S/N: 978612997 Working length: approx. 3000 mm Working width: 600 mm Working height min-max: 450 – 1250 mm 12 supports 8 pneumatic pressure cylinders Dimensions (L x W x H): 3.5 m x 0.8 m x 2.24 m Weight: 1150 kg Technical information subject to change

Būklė: labai geros būklės (naudotas), Für Platten mit Maßen 5600 x 2600 (2700 mm), Stärke von 2 mm bis 60 mm 2 doppeldeckige Einlaufrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang Hydraulischer Hubtisch (ca. 5600 x 2700 mm) System mit Gummirädern (11 oben + 11 unten) zur Plattenpressung/-zuführung Verschiebbarer Querträger mit 45 Saugnäpfen und 5 Stützarmen (zur Ausrichtung des Plattenstapels) 1. Rückwärtiger Schieber mit 11 Spannzangen Drehtisch (90° Plattendrehung) mit Kunststoffrädern 1. Plattensäge AH8 580 – max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) Hauptsägewelle (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) Kdjdpfx Aexvc N Djldon Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 – 150 Verschiebbarer Querschlitten mit 7 Schiebern für geschnittene Platten Mit 4 Auflagen (für Plattenstapelausrichtung) und 3 motorisierten Ketten 2. Rückwärtiger Schieber mit 25 (27) Spannzangen 2. Plattensäge – max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) Hauptsägewelle (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 – 150 Restematerial-Absauganlage mit Zerkleinerer VECOPLAN (55 kW) Tisch mit kunststoffbeschichteten Rollen für den Abtransport der geschnittenen Platten Stapelsystem für geschnittene Platten mit 2 vorderen Stütztischen mit Luftgebläse 400 x 6300 mm + 8 Hubtischen (4 Stück 1300 x 1600 mm und 4 Stück 1300 x 1410 mm) – Gesamtanschlusswert 130 kVA

Būklė: geras (naudotas), Pramoninis Ethernet jungiklis, tinklo jungiklis, LAN jungiklis - Gamintojas: Siemens, Ethernet Switch Scalance XB008, 8 jungčių - Tipas: 6GK5008-0BA10-1AB2 Ksdpfx Aex Tzh Njldsdn - Matmenys: 110/45/H85 mm - Svoris: 0,2 kg

Būklė: naudotas, Container Corner Casting, Container Corner, Container Parts - Quantity: 18 corner castings available - Price: per piece - Cast markings: DL TR 08 1118 / DL BR 08 1124 - Height: 160 mm Kedpeg A U Raefx Aldjdn - Individual dimensions: 178/120/H160 mm - Weight: 11 kg/piece

Būklė: geras (naudotas), Pavarų dėžė, kampinė pavara, tiesiakampė pavara, redukcinė pavara, sraigtinė pavara, kampinė pavara briaunų klijavimo staklėms - Gamintojas: ZAE, kampinė pavara su kardaniniu šarnyru iš briaunų klijavimo staklių BRANDT KS 25 Tipas: W 88 Kedsgylraepfx Aldsdn - Perdavimo santykis: i = 2 : 1 - Matmenys: 260/100/A210 mm - Svoris: 7,2 kg

Gamybos metai: 2008, būklė: paruoštas naudoti (naudotas), Two Schüco corner crimping machines for window fabrication are available. 1) Schüco CC 120 A, year of manufacture: 2008, maximum profile height: 120 mm, maximum punching height: 105 mm, minimum frame inner dimensions X/Y: 400 mm/400 mm, machine dimensions X/Y/Z: approx. 1450 mm/1500 mm/1000 mm, weight: approx. 700 kg. 2) Schüco corner crimping machine, year of manufacture: 1997, nominal pressure: 0.7 MPa, air consumption: 100 l/corner, weight: approx. 650 kg. An on-site inspection is possible. Kjdpfx Aowwlk Aeldedn

Būklė: visiškai atnaujintas (naudotas), spaudimo jėga: 10 t, darbinio aukščio: 805 mm, bendras ilgis: 1 700 mm, paskutinio kapitalinio remonto metai: 2026, Pleištinių dantukų presas Pleištinių jungčių ciklinis presas Presavimo jėga 10 t Kdedpfx Alet Sc Swedsn Hidraulinis pleištinių dantukų ciklinis presas Medžio plotis 80 - 300 mm Medžio storis 18 - 100 mm PASIRINKIMAI Su 300 l hidraulikos agregatu ir 5,5 kW varikliu, gamintojas GOD Su elektrine įranga

Būklė: visiškai atnaujintas (naudotas), DKV III Throughfeed Press with Braking Unit Completely overhauled Optionally with original hydraulic motors or conversion to servo motors Options: - Chain threading - Travelling cross-cut saw Function: For continuous pressing of finger joints without stops (in throughfeed mode). The upper and lower plate chains generate the feeding force. Downstream brake plates transmit the required longitudinal pressing force to the wood by friction. Advantages: - High performance despite relatively slow feed rate - Absolutely no vertical misalignment of the finger joints Technology: Heavy-duty 2" plate chain, pneumatically height-adjustable Floating brake elements Pressing force measurement via contact manometer Electrical height adjustment Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10–70 m/min Drive power Adjustment feed unit 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Kdsdpov T Aqyefx Aldjn Technical data: Wood width 90–180 mm Wood thickness 20–80 mm Thickness-to-width ratio 6:10 Wood cross-section with 15/16.5 mm finger joints max. 90 cm²

Būklė: reikia remonto (naudotas), Gamybos metai: 1993, mašinos/transporto priemonės numeris: 624/9, spaudimo jėga: 10 t, darbinio aukščio: 805 mm, bendras ilgis: 1 900 mm, Pleištinės briaunų sujungimo presas Taktinis presas pleištinėms briaunų jungtims Pleištinių briaunų presas Kdjdpfx Aet Sc T Isldon Presavimo jėga 10 t Medienos plotis: 80 - 300 mm Medienos storis: 18 - 100 mm PAPILDOMAI su hidrauliniu agregatu

Būklė: reikia remonto (naudotas), Gamybos metai: 1994, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 6305/7, spaudimo jėga: 15 t, darbinio aukščio: 905 mm, bendras ilgis: 1 900 mm, Pleikinės pirštojungiamosios presas Ciklinė presas Pleikinės pirštojungiamosios presas Ksdpfx Aljg T Spajdsdn 15 tonų spaudimo jėga Dimter linija, kurią sudaro: 1 padavimo agregatas su 2 voleliais ir servovarikliu 1 pleikinės pirštojungiamosios presas, 15 t 1 hidraulinis agregatas su reguliuojama pompa 1 padavimo agregatas su 2 voleliais ir servovarikliu 1 skersinio pjovimo pjūklas galutiniam ilgiui >> be elektros įrangos PASIRINKTINAI: Elektros įranga

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Atitinka CE standartus • Kampinė presavimo mašina, skirta aliuminio profilių 90 laipsnių sujungimui • 2 viršutiniai presai ir peilių judėjimas yra hidrauliniai • Yra milimetrinė liniuotė peilių aukščiui ir eigos nustatymui • Hidraulinis centrinis kampinis atmušas • Tiksliai reguliavimui yra išleidimo mygtukas • Su įrenginiu pateikiami 2 vnt. 4 mm peiliai • 2 pedalai naudojami hidrauliniam presavimui ir profilio prispaudimui • Poliamido plokštė apsaugo profilio paviršių nuo pažeidimų Kdsdjrbk Tfjpfx Aldsn • Profilio atramai yra dešinė ir kairė atraminės svirtelės