Plokščių pjovimo pjūklas, kampinė sistema - AH 8

SCHELLING AH 8 (580) mm 5600 x 2700

Būklė: labai geros būklės (naudotas), Für Platten mit Maßen 5600 x 2600 (2700 mm), Stärke von 2 mm bis 60 mm 2 doppeldeckige Einlaufrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang Hydraulischer Hubtisch (ca. 5600 x 2700 mm) System mit Gummirädern (11 oben + 11 unten) zur Plattenpressung/-zuführung Verschiebbarer Querträger mit 45 Saugnäpfen und 5 Stützarmen (zur Ausrichtung des Plattenstapels) 1. Rückwärtiger Schieber mit 11 Spannzangen Drehtisch (90° Plattendrehung) mit Kunststoffrädern 1. Plattensäge AH8 580 – max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) Hauptsägewelle (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 – 150 Verschiebbarer Querschlitten mit 7 Schiebern für geschnittene Platten Mit 4 Auflagen (für Plattenstapelausrichtung) und 3 motorisierten Ketten 2. Rückwärtiger Schieber mit 25 (27) Spannzangen 2. Plattensäge – max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) Hauptsägewelle (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 – 150 Hfodpoxvc Rzjfx Af Dof Restematerial-Absauganlage mit Zerkleinerer VECOPLAN (55 kW) Tisch mit kunststoffbeschichteten Rollen für den Abtransport der geschnittenen Platten Stapelsystem für geschnittene Platten mit 2 vorderen Stütztischen mit Luftgebläse 400 x 6300 mm + 8 Hubtischen (4 Stück 1300 x 1600 mm und 4 Stück 1300 x 1410 mm) – Gesamtanschlusswert 130 kVA

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track elements): 9 pcs Clamping grippers: 7 pcs, first 3 pieces: 2-finger Air cushion table, width: 650 mm, 4 pcs at 2160 mm length Central blower: 1 pc with increased blower capacity – 3 angled-lift clamping grippers (2-finger) – 1 angled-lift clamping gripper (1-finger) – 1st air cushion table: 800 mm wide – Speed package: Saw carriage feed rate 1 – 150 m/min Hfsdpeymx S Defx Af Def Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. pressing width: 0 mm, max. pressing width: full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Labelling with part graphics / label software / label printer PICA 104

Būklė: beveik kaip naujas (parodų įrenginys), COMPLETE DOUBLE-SIDED EDGE BANDING AND PANEL SIZING LINE. The line consists of the following machines: VZ0200A) Automatic loading station with double loading platform "BARGSTEDT" Model TBH 500/D/30/12 VZ0200B) 1st double-sided edge banding and panel sizing machine "HOMAG" Model KFL 525/8/A3/15 Hsdpfx Afsdt Rgve Deff VZ0200C) Rotation station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" Model TDL 310/30/12 VZ0200D) 2nd double-sided edge banding and panel sizing machine "HOMAG" Model KFL 526/10/A3/30 VZ0200E) Rotation station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" Model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double buffer station "BARGSTEDT" Model TSP 410/D/25/12

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Hfedsiidm Nepfx Af Def Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 - in solid strip mm max 1 Panel thickness (min/max) mm 14 / 60 (LASER - Max 50) Control ICOS Open Feed speed m/min (adjustable) 6 - 30 Top pressure driven by V-belt Spray unit (for liquid release agent) Adjustable stop ruler CNC controlled Panel infeed system Jointing milling unit with CNC control 08.378 (2 x 4.5 kW) Edge pressure zone (CNC controlled) Gluing unit (PUR glue + pre-melter) 283.201 + 283.203 Gluing unit (pre-melter with laser) Laser System LASERLINE Spray unit (for separating agent) Pressure zone + edge magazine for rolls (compartments no.) 36 + 12 End trimming unit 08.428 (0.2 kW x 2) Speed up to 30 m/min (0° - 25°) Pre-milling unit 08.0555 HS/LS1 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 1) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 30 (0.5 kW x 1) max 30 m/min Hedoi Hn Sropfx Af Doff Multi-profile scraper unit (CNC controlled) 08.0516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing liquid) Buffing unit 08.614 (0.25 kW x 4) Universal milling unit for grooving/rabbetting and profiling 2x08.190 (4.5 kW x 2) 90°/180°/270° (CNC)

Būklė: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, bendras ilgis: 7 920 mm, garantijos trukmė: 3 mėnesiai, HOLZ-HER Edgebander ACCURA 1556 premium with intelligent equipment package for edge thicknesses up to 15 mm. Simple program changes and tool adjustments via the 18.5" touch control panel. Short heating time for the GlueJet adhesive system of approx. 2 to 3 minutes, depending on adhesive type and ambient temperature. Always fresh adhesive thanks to the GlueJet application system and adhesive cartridges. Changeover to PUR adhesive and cleaning the system is easy and can be completed within minutes. Axis adjustment via high-precision, repeatable servomotors. Special features for materials with protective foil, such as high-gloss and super-matte surfaces! One of the absolute highlights of the machine is the multifunction package, which proves its strengths in workshops dealing with a variety of edge types. The DIA tools are multi-stage and can switch between radii and chamfers depending on the requirement – from longitudinal milling unit to corner copying and profile scraping blade. The extendable workpiece support and the extended infeed area assist with processing large workpieces, while a guidance device helps introduce small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material-dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet for EVA and PUR adhesives, with minimal effort. All standard edge types up to high-gloss & super-matte finishes, as well as solid wood edging up to 15 mm. Hfodsx Emf Depfx Af Dof iTronic – pressure and adhesive quantity control Prepared for connection to a RETURN system Motor-driven pressure bridge with upper belt drive Multifunctional units for rapid setup of radius, flush, and chamfering operations Vertical & horizontal spraying devices and much more. Delivery, installation, and operator training can be arranged directly through us at additional cost. The machine is currently located at our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Būklė: labai geros būklės (naudotas), 5-Axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding ICOS CNC control unit (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel path mm 650) Maximum working area (X - Y - Z) during edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – mm 1400 LED positioning guides for vacuum suction cups (positioning along the Y-axis) No. 2 vacuum pumps (capacity 140 m³/h) Safety cabin for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type), No. 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter (mm) 200 Edge banding unit (PUR glue + Pre-melter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE BANDING UNIT Hfjdpfxow A Ruqo Af Dof No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, ruošinio ilgis (maks.): 4 580 mm, ruošinio plotis (maks.): 1 650 mm, ruošinio aukštis (maks.): 300 mm, įrankio skersmuo: 350 mm, Įranga: sūkių greitis be galo kintamas, Machining Center 7235 Demonstration Machine Machining area: 4580 x 1650 mm; maximum workpiece size for contour milling, minus the cutter radius. Maximum panel width that can be placed: 1,660 mm, maximum workpiece height: 300 mm Simple and fast suction cup positioning with the Holz-Her VI.SE LED table. The different colored LEDs indicate the position of the consoles and suction cups, including the rotation angle for rotatable suction cups. 8 consoles, each with 2 suction cups per console and electronic stop monitoring. Hsdpfx Aex E Afmof Djff The milling spindle has a power of 13.0 kW and can accommodate milling tools with a maximum diameter of 200 mm via an HSK interface, as well as saw blades up to 350 mm. Ideal for heavy-duty tasks, such as in solid wood processing. 35 drilling spindles, of which 25 are vertical and 10 horizontal. Two saw units, each in X and Y axis, for saw blades up to 125 x 4 mm. 24-position rotary tool changer and 14-position pick-up changer, as well as a single saw blade magazine for 350 mm saw blades, offer maximum flexibility in tooling. Safe Detect – Safety monitoring instead of foot mats or light barriers Waste conveyor belt integrated into the machine frame ...and many other features Delivery, installation, and commissioning training of the machine can be arranged directly with us at an additional charge. The machine is currently located in our distribution warehouse in Gratwein, Austria. In case of discrepancies between the German version and any foreign language version, only the German version is binding. Our terms and conditions can be found on our homepage at holzher.de/de/agb.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 9 kW (12,24 AG), pjovimo aukštis (maks.): 82 mm, pjūklo disko skersmuo: 315 mm, sukimosi greitis (maks.): 4 400 aps./min, bendras ilgis: 3 300 mm, bendras plotis: 3 350 mm, bendras svoris: 3 000 kg, pjovimo ilgis (maks.): 3 300 mm, X ašies padavimo greitis: 100 m/min, padavimo greitis Z ašis: 150 m/min, pjūklo disko greitis: 4 400 aps./min, pjūklo pavara: 9 000 W, Įranga: sūkių greitis be galo kintamas, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control system: PA-WIN10 + SIMATIC S7 | High-performance panel dividing saw for maximum precision & efficiency The SCHEER PA 4500 is a robust, industry-proven panel saw designed for the precise processing of both coated and uncoated wood-based panels. Engineered for demanding applications, even the basic configuration meets all requirements of a modern cutting operation. Main technical data: Cutting length (max.): 3300 mm Cutting height (infinitely variable): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | Cutting width 3.2 mm Scoring saw blade: Ø 200 mm | conical | Cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scorer motor: 1.1 kW Saw carriage drive: 2.32 kW Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (infinitely variable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/cycle Dust extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Machine design & key features: Heavy-duty cast honeycomb structure for vibration damping Absolute encoders for highly accurate positioning (no referencing required) Saw carriage optimized for travel distance and cycle time Automatic oil mist lubrication & guideway cleaning Program-controlled adjustment of blade height & scorer position ProLock quick-change system for saw blade replacement "Tested for wood dust" – emissions only 0.65 mg/m³ Machine equipment: 1x Angle pressure unit WP 8500-1400 Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x Material feed table HP 5130 – 33 x 33 Rear-mounted with hardened guides & rack-and-pinion drive Hfedowrpcxjpfx Af Djf Roller conveyor system for effortless panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x Angle stop table HP 5137-1-1465 1x Workpiece support table HP 5135-1-1465 Pertinax surface, each 1465 x 800 mm 1x Air cushion system LK 5169 Central radial fan, max. pressure 2800 N/m² 1x Control cabinet dustproof, separately mounted, vibration-protected 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64-bit) (upgrade to latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel storage management, etc.) Network-capable, future-proof, modularly expandable Operating modes & control: Manual: single, chain dimension, trim and remnant cutting Automatic: cutting plan processing, online order management Editor: parts list-based planning & optimization Maintenance & diagnostics: blade measurement, single axis control, and more 📞 Contact us for a customized quote or to arrange a viewing. Delivery, installation, commissioning, and training available on request.

Būklė: labai geros būklės (naudotas), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control system: ICOS open compact Feed speed m/min (adjustable) 6 - 30 Top pressure belt-driven, spraying unit (for liquid anti-adhesive) Panel infeed system A1 / 15 Adjustable guide fence CNC-controlled. Panel infeed system Barcode reader Jointing milling unit with CNC control 08.379 (2 x 4.0 kW) Radiator for edge heating of workpieces Gluing unit (P.U.R. glue + premelter) VTG + 283.203 Edge pressing zone. Edge height adjustment – CNC-controlled. Edge magazine for rolls (compartment no.) 12 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30m/min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC-controlled) 08.0587 (0.66 kW x 2) 4 PROFILES HSK 25 Spraying unit (for sliding liquid) Contour milling unit (for fine milling) CNC-controlled KFA x30 (0.5 kW x 1) 30m/min Multi-profile scraper unit (CNC-controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617 (0.18 kW x 4). Open space Universal milling unit for grooving/rabbetting and profiling 08.190 (4.5 kW x 1) Hjdpfx Ajltmnljf Doff