Mtu Cogenerationengines Aoe16V4000L62 pirkti naudotą (105)

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: Kdodpfx Absfmqq Eo Nsp - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), "ANKELE" DIRŽO NUIMTUVAS BAP 375-70 1A Kedpfxsu Skmws Ab Njdp

Būklė: labai geros būklės (naudotas), Medžiagos priėmimo įrenginys šlifuokliui arba obliui Bendras ilgis: 4500 mm Bendras plotis: 120 mm Kjdpfxox Ahhrs Ab Njdp Pneumatinis išmetimas Volelių plotis: 260 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2011/67/47, pjūklo disko skersmuo: 420 mm, įėjimo įtampa: 400 V, pjūklų disko skylė: 40 mm, įėjimo srovė: 6 A, Siūlome labai gerai išsilaikiusią GRAULE ZS 170 N kampinę ir skersinę pjūklą aliuminiui bei medienai, pagaminta 2011 m. Kdsdpfxjy D Nkgj Ab Nep

Būklė: paruoštas naudoti (naudotas), table length 6000 mm table width 700 mm Kdjdpfx Aswuz Sdob Nop table height 680 mm mechanical drive switching on and off on both sides

Būklė: geras (naudotas), mašinos/transporto priemonės numeris: 16526, Table size (model): 320 x 440 mm Table size (working): 200 x 300 mm Longitudinal travel: 250 mm Kedpfx Aedlkwgjb Njdp Transverse travel: 220 mm Spindle speeds: 1460 - 8550 rpm Milling ratio: at 1 : 1 approx. 105 x 165 mm Spindle drive: 0.86 kW Required space: 1000 x 900 x 1320 mm Weight: 360 kg

Gamybos metai: 2021, būklė: labai geros būklės (naudotas), Used screw compressor ALMIG COMBI 8/270D - 10 bar (air-cooled) with integrated refrigeration dryer with time-controlled condensate drain with 270 liter air receiver equipped with AirControl Mini controller Year of manufacture: 2021 Operating hours: 2,600 h The compressor has a few dents on the exterior, but is technically 100% functional. Technical Data Model: COMBI 8/270D Operating overpressure: 10 bar(g) Free air delivery according to ISO 1217 Annex C: 1.02 m³/min Protection class / insulation class of drive motor: IP 55 / ISO F Nominal power of drive motor: 7.5 kW Kdjdpfxeiqym Ho Ab Nop Operating voltage / frequency: 400/50 V/Hz Sound pressure level (DIN 45635 T.13): 64 dB(A) Length: 1,180 mm Width: 770 mm Height: 1,680 mm Weight: 460 kg Compressed air connection: G 3/4" Attractive leasing options available through our partner bank. Visit our showroom. We always have a wide selection of new and used compressors in stock! Immediately available.

Būklė: naujas, Belaidis valdymas / Joystick siųstuvas / Siųstuvas / Imtuvas: 1. Belaidis valdymas / joystick siųstuvas / siųstuvas Tipas: DRC - JD2 su 4 akumuliatoriais. (naujas). 2. Siųstuvas, tipas: DRC - 10 2ST D3 - 2 vnt. (nauji). 3. Imtuvas, tipas: DRC - MP D3 (naujas). Ksdpfjyuy S Uex Ab Nsdp 4. Plokštė, tipas: DRC - DR D3 (nauja). 5. Elektros dėžė su imtuvu, tipas: HBC FSE516 6. Imtuvas, tipas: RC - E10 7. Belaidis valdymas / joystick siųstuvas / siųstuvas - 2 vnt.: Tipas: FSS760 - 40 Tipas: 716 - K 12973 8. Belaidis valdymas / joystick siųstuvas / siųstuvas - 2 vnt.: Tipas: F24 - 60 TK 9. Belaidis valdymas / joystick siųstuvas / siųstuvas - 2 vnt.: Tipas: F25 - 6D

Būklė: geras (naudotas), Gamybos metai: 2017, Boge C10 LDR-350 sraigtinis kompresorius + džiovintuvas + imtuvas Gamintojas: Boge Modelis: C10 LDR 350 Metai: 2017 Maksimalus slėgis: 10 bar Imtuvo talpa: 350 litrų Oro srautas: 1,03 m3/min Variklio apsukos: 1.500 min Variklio galia: 7,5 kW Įrenginio matmenys (IxPxA): 1.960 x 720 x 1.350 mm Kdsdpfxoyfpk Uj Ab Nop Įrenginio svoris: 350 kg.

Būklė: naudotas, Gamybos metai: 2006, Susijęs dokumentas Techninis aprašymas 316L nerūdijantis plienas Uždaro tipo kasetinis filtras Darbinis slėgis: -1 / +6 bar Darbinė temperatūra: -10 / +140 °C Talpa: 1130 l Atex įrenginys: Ex II 2G IIB Įrangoje sumontuota: - Įvadas lygio indikatoriui - 16 plovimo purkštukų - 2 plovimo rutuliai - 3 viršutiniai oro plovimo purkštukai su Novaseptic vožtuvo membrana - 2 langai - 12 vnt. 5 μm filtro kasečių Kjdpfx Ajx R Amzeb Nodp

Būklė: naudotas, Šis pasiūlymas skirtas „Radiant Innovation ZG10U“ sieniniam CO₂ monitoriui su imtuvu. Įrenginys visiškai veikiantis, paruoštas nedelsiant naudoti. „ZG10U Wall Mount CO₂ Monitor“ (gamintojas: ZyAura) – tai profesionalus patalpų oro kokybės stebėjimo prietaisas, sukurtas aplinkoms, kur būtinas tikslus CO₂ matavimas ir efektyvus vėdinimo valdymas. Naudojama pažangi jutiklių technologija, įrenginys palaiko automatinius saugos perspėjimus uždarose erdvėse. Pagrindinės savybės ir techniniai duomenys: - CO₂ matavimo diapazonas: 0–50 000 ppm (dalelių milijonui) - Jutiklio technologija: Dvigubos spindulio NDIR (neardomoji infraraudonųjų spindulių technologija) – užtikrina ilgalaikį tikslų ir stabilų CO₂ aptikimą - Tikslumas: ±100 ppm arba ±5% nuo rodmens (atsižvelgiama į didesnę reikšmę) - Temperatūros stebėsena: nuo 0°C iki 50°C (32°F – 122°F) Ekranas: - Didelis skaitmeninis LCD, aiškiai rodantis aplinkos CO₂ koncentraciją bei temperatūrą Signalizacijos sistema: - Garsiniai ir vizualiniai perspėjimai su reguliuojamomis ribomis (AL1 ir AL2) Relinis išėjimas: - Leidžia valdyti išorinius įrenginius (pvz., vėdinimo ventiliatorius ar CO₂ generatorius) - Išėjimas: 30 VDC arba 250 VAC, maks. 2A, SPST, normaliai atviras Automatinė ventiliacijos kontrolė: - Relinis išėjimas gali aktyvuoti vėdinimą (pvz., ventiliatorių) uždarose erdvėse priklausomai nuo CO₂ lygio Apsaugos klasė: - IP54 purslų atsparumas jutiklio blokui (SEU), išskyrus nugarėlę, kai montuojama prie sienos SEU + RDU modulinė sistema: - SEU (jutiklio blokas) jungiamas su iki 3 RDU (nuotolinio rodymo blokais) naudojant 7 metrų ryšio kabelius - Idealiai tinka saugos perspėjimams keliuose taškuose ar patalpose - Nuotoliniai blokai realiu laiku rodo CO₂ ir temperatūros duomenis iš SEU Pritaikymo sritys: - Biurai ir posėdžių salės - Klasės ir švietimo įstaigos - Laboratorijos bei mokslinių tyrimų centrai - Pramoniniai sandėliai ir saugyklos - Integracija su HVAC sistemomis išmaniajam vėdinimui Kdodpfx Aboxv A Dbo Nep Montavimas: - Sieninis montavimas (rekomenduojama maždaug 0,45 m aukštyje nuo grindų) - Maitinimas: AC adapteris (110/220 VAC) - Lengvas relinis prijungimas prie vėdinimo ar saugos sistemų Radiant Innovation ZG10U sieninis CO₂ monitorius su imtuvu

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, veikimo valandos: 1 000 h, Puikios būklės sniego šalinimo įranga, susidedanti iš barstytuvo ir ašmenų. Barstytuvas Schmidt Stratos 2, 8m3, pilnos komplektacijos. Hidraulinė sistema, Schmidt MS Tarron 3,6 m peilis su elektrohidrauline sistema. Kodpfxjx Aqpxs Ab Nodp

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 6 886 h, Funkcionalumas: visiškai funkcionalus, Base configuration DW 3060-F "Buffalo" (carrier machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system including ABS and lighting according to EC directive 50 mm EC towing eye incl. bolt-on shoe Hydraulically adjustable support leg Splash protection (internal and side fenders) Permissible total weight 25,000 kg Tires: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gearbox 380 kW Auxiliary hydraulic connection 20 l/min Hydraulic preparation for traction drive Fuel tank: 2 x 300 liters Rear discharge conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged wear strips 24 V electrical control system Ksdpfx Aexx Tfzeb Nsdp Roller reversal by electric motor when engine is off Automatically reversible cooling fan Chassis with level regulation Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Hydraulic traction drive SHREDDING SYSTEM SIZE "L" 600/4 COMPLETE Auxiliary hydraulic connection 70 l/min Radio remote control Comb extension Size "L" Limiter Mounting for comb extension Limiter Size "L" Overband magnet for rear discharge conveyor Frame for overband magnet Moistening device

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 8 011 h, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 16 000 mm, bendras plotis: 3 000 mm, bendras aukštis: 3 600 mm, bendras svoris: 40 600 kg, galia: 360 kW (489,46 AG), Doppstadt DW3060K Büffel/Biopower/Type F/Selector HS-514/Smulkintuvas/Pramoninis smulkintuvas • Gamintojas: Doppstadt • Tipas: DW3060K Büffel • Pagaminimo metai: 2018 • Darbo valandos: 8011 val. Kedpfx Abozimm Ho Nodp • Galia: 360 kW/489 AG • Pramoninis smulkintuvas • Variklis: Mercedes Benz MTU OM471LA (6R 1300) EUROMOT IV, 6 cilindrų dyzelinis • Pneumatinis spiralinis ventiliatorius • Kuro bakas: 2 x 300 litrų • AdBlue • Telematikos sistema • Smulkinimo volas: dydis M • Ilgis: 3 metrai • Skersmuo: 80 cm • Dantų plotis: 7,4 cm • Dantų aukštis: 8,5 cm • Dantų skaičius: 125 vnt. • Pralaidumas: 20–60 t/val., priklausomai nuo medžiagos • Magnetinė juosta • Vikšrinė važiuoklė: Strickland 335713-DK40-AA • 2 važiavimo greičiai • Pakrovimo aukštis: 3,10 metro • Nuotolinio valdymo pultas • Centrinė tepimo sistema • Transporto ilgis: 16 metrų • Transporto plotis: 3 metrai • Transporto aukštis: 3,60 metro • Bendras svoris: 40 600 kg • Vokiška mašina • Paruošta eksploatacijai iš karto _____ Selector HS-514 / žvaigždinis sietas su grąžinimo juosta • Sietų dydis: 8–10 cm • 13 žvaigždinių velenų • Integruotos atraminės kojos • Priedas paimamas su mašina ir varomas per papildomą hidraulinę sistemą • Žvaigždiniai velenai atbuliniai • Pavara: hidraulinė • Perdirbimo sistema stambioms medžiagoms • Išmetimo aukštis: 3,10 metro • Šis pasiūlymas yra neįpareigojantis ir gali būti pakeistas. - Pasiliekama teisė parduoti bet kuriuo metu, - Galimos klaidos ar rašybos klaidos. - Pardavimas pagal mūsų bendrąsias sąlygas.

Būklė: naudotas, rida: 1 km, galia: 240 kW (326,31 AG), ašių konfigūracija: 4x4, pavaros tipas: automatinis, Gamybos metai: 2021, Gross vehicle weight: 95,140 kg Kjdpfx Aboy Iagyo Njdp For further information, please contact Emal Jaweed. Hyster RS46-41XD/80S Reach Stacker, Year of Construction: 2021, Operating Hours: 1,814 h, Weight: 95,140 kg, Mercedes Benz MTU 6R 1100/OM 470 Stage V, Lifting height: 15.23 m, Engine: 6-cylinder inline diesel engine, 5 forward and 3 reverse gears, ECO-eLo and HIP performance modes, Wheelbase: 8,000 mm, Emission Standard Stage V, Tire Size: 18.00-33 36PR, New UVV safety inspection, Operator’s cab with elevating feature up to 3,600 mm height, Spreader unit incl. Piggy Back system (clamping tongs), Stack height first row: 5 x 9'6", Hydrodynamic powershift transmission (Dana TE 30), 6 radial pneumatic tires, 4 integrated piggy-back legs with pre-clamping function for swap bodies and trailers, 2-stage telescopic mast, welded inside and outside with synchronized lifting movement, Net length of piggy-back legs: 4,118 mm, Front and rear color camera system plus cameras on all piggy-back legs, rear radar, Automatic climate control, Remote control for all hydraulic functions, Heated exterior mirrors, Digital radio (DAB) with hands-free system, IT hardware installation support, Bluetooth transmitter, Hydrostatic steering, LIKE NEW CONDITION, Height-adjustable cabin / Cabin lift. Other Information: * We are offering more than 200 units for sale. * Our location is 30 km north of Frankfurt am Main Airport. * Financing & leasing possible. * Specialist for transport & worldwide shipping. * No liability for typographical or printing errors * Errors and interim sale reserved. * Trade-in possible! * For vehicle purchase/used equipment sales, only the terms and conditions of Jaweed GmbH apply. * Further information as well as our Terms and Conditions are available on our website... We are selling under our General Terms and Conditions (see: ... /AGB).

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 5 189 h, Equipment: Basic Package Inventhor 9: MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with emission standard EUROMOT V Auxiliary hydraulic connection 30 l/min and 70 l/min Roll drive via planetary gearbox 380 kW – VARIO – Kdjdpfxsyu Snuo Ab Njp Load-sensing system Fuel tank 950 liters Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally positioned lubrication strips 24 V electric control system Additional electric pump for operating the following functions while the engine is off: “Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding hopper” Complete radio remote control Large side fiberglass (GRP) maintenance doors Service-friendly engine compartment with LED lighting Hydraulically reversible fan Loading protection on both sides Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Additional Equipment: 500 mm flat track undercarriage unit Watering system with hopper extension H=300mm on both sides Shredding system Size "L" - VARIOMAT (Variomat-System L600/4 - 42 teeth) Rear conveyor length 7 m, 1,200 mm wide Size "L" - "Limiter" (20 pieces) LED lighting package engine compartment and rear Central lubrication with pump Delivery date by arrangement

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 3 304 h, Funkcionalumas: visiškai funkcionalus, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Kdodsxx Tigspfx Ab Nsp Tri-axle semi-trailer chassis, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive Tyres 385/65 R22.5 Permissible gross weight 32,000 kg Hydraulically adjustable support legs Splash protection (inner and side mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm complies with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control including automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with mounted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned lubrication strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs, opening/closing rear basket, folding/unfolding rear conveyor belt, disengaging travel drive) when engine is off 24 V electrical control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket Multimesh (mesh sizes between 30 - 280 mm, increments on request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, with antimagnetic centre section Underslung conveyor: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water supply connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates at the feed hopper (made of wear-resistant steel) on both sides for sidewall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic travel drive Scraper floor chain lubrication Neodymium overband magnet Frame for overband magnet Central lubrication system Engine compartment guard plate Lighting package: engine compartment and rear conveyor Watering system Delivery date according to agreement Available from 06/2026

Būklė: naudotas, Gamybos metai: 2022, veikimo valandos: 4 561 h, Funkcionalumas: visiškai funkcionalus, Basic Package AK565: Centrally mounted axle trailer chassis with 2 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EU directive 50 mm EU towing eye including drawbar foot Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (internal and side-mounted mudguards) Permissible gross weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust routed upwards Load-dependent feed control incl. automatic scraper floor reversal Fuel tank: 450 liters Infeed roller: Length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging spheroidal cast iron flail holders and interchangeable double-lock flail tips Standard: “Streusel plus” flail tip Centrally positioned wear rails Electric pump for actuating cylinder functions (e.g. raising/lowering support leg and opening/closing rear basket, folding/unfolding rear conveyor, releasing drive) when the engine is off 24V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh size 30–280 mm, gradation on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for infeed roller and scraper floor Complete radio remote control Drive system pre-equipment Rear discharge belt 4 m, 1,800 mm wide (“classic”) Anti-magnetic center section on rear belt Reinforcement plates on the hopper side walls (material: Hardox) on both sides Fire extinguisher Audible start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional Equipment: Hydraulic drive system 600 l fuel tank Kdjdpfx Aeyhckmob Nsp Flail tip C1 “Bear Paw” with carbide Rear discharge belt 4 m, belt width 1,800 mm, lowerable Neodymium magnetic roller incl. chute Separate drive of infeed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Pervežamas kompresorius ATLAS COPCO XAHS237+ su galutiniu aušintuvu, po pilno aptarnavimo. Techniniai duomenys: Našumas: 14,20 m³/min; Darbinis slėgis: 12 barų; Kedpfx Asx Iffheb Nedp Gamybos metai: 2017 Variklis: MERCEDES MTU Darbo valandos: 4 910 h Kompresorius visiškai veikiantis, paruoštas darbui, su garantija. Grynasis kaina: 175 500 PLN Bruto kaina: 215 865 PLN Mašina importuota idealios būklės.

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 10 400 h, Equipment: Basic Version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system including ABS and lighting according to EC directive 50 mm EC towing eye incl. insert shoe Hydraulically adjustable support leg Spray protection (interior and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection: 20 l/min Kjdoyu Srmopfx Ab Nodp Hydraulic preparation for drive system Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for the roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control system Reversal of the roller via electric motor when combustion engine is off Automatically reversible cooling fan Chassis with level regulation Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: Hydraulic drive system Radio remote control Mounting for comb extension Limiter Size “L” Comb extension Size “L” Limiter Moistening device Removable hopper extension plates on both sides Delivery date by arrangement

Būklė: naudotas, Gamybos metai: 2019, veikimo valandos: 6 725 h, Equipment: Base version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system including ABS and lighting according to EC directive 50 mm EC towing eye including mounting shoe Hydraulically adjustable support leg Splash guards (internal and lateral fenders) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear discharge conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged wear strips 24 V electrical control system Reversible roller drive via electric motor when engine is off Kdjdpfjy D Nicjx Ab Nep Automatically reversible fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydrostatic drive system Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date by arrangement

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2019, veikimo valandos: 5 225 h, bendras svoris: 25 000 kg, Doppstadt DW 3060 Biopower F tipas - Pagaminimo metai: 2019 - Darbo valandos: 5225 - Variklis: MTU R61300, 490 AG - AD BLUE - Svoris: 25 000 kg Kdedpfsyxkwqex Ab Nsp - Nuotolinis valdymas - Drėkinimo sistema - Galinis konvejeris 5,5 m - Virš juostos magnetas - Hidraulinė pavara (savava dis) - Centrinis tepimas Mašina atnaujinta ir iškart prieinama.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 160 h, Funkcionalumas: visiškai funkcionalus, nominali (akivaizdi) galia: 1 100 kVA, Siūlome geros būklės Atlas-Copco DTAS 1100 E 110 kVA generatorių. Pagaminimo metai: 2016 Darbo valandos: 160 Kdjdpjyy Dkasfx Ab Nep Kuras: dyzelinas Bakelio talpa: 1000 litrų Varomas MTU varikliu. Daugiau informacijos suteiksime pagal pageidavimą, generatorius iš karto prieinamas.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2019, veikimo valandos: 3 922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel Engine Make: MTU 6R 1300 Emissions Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Tank Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 to 32 rpm Number of Drum Inserts: approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Transport Height: 3,893 mm Kedpfx Ajxcx Snjb Nsdp Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load from starting torque thanks to load-free drum engagement - Self-cleaning function for winders - Flexible shredding concept with various application packages - New door and housing design for improved maintenance accessibility - Quick belt folding mechanism at the push of a button - State-of-the-art monitoring system - Reduced noise emissions Machine is fully overhauled and immediately available!!!!!

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 2021, 3D AC SERVO SkyCNC WK Series CNC Router - 2050 mm x 3050 mm x 220 mm High-precision milling and drilling with extremely high speed and quality. As a CNC router manufacturer, pfeifer-technology with its skycnc CNC routers and engraving machines is your reliable partner. Our PFEIFER technology skycnc WK series routers feature highly accurate ball screw drives on all axes, delivering maximum precision, accuracy, and speed at an attractive price-performance ratio. The robust base frame made from solid steel, weighing around 4 tons, ensures outstanding static rigidity of the machine, enabling effortless processing of solid wood and various metals. The sophisticated arrangement and distribution of the 35mm linear rails and guides, combined with the massive gantry and its vibration-damping properties, are distinctive features of our CNC routers. All machine components and servo drive units are the result of years of development and expertise. The powerful servo motors are coupled backlash-free and with exceptional efficiency to German-manufactured precision ball screws, providing a feedback-free drive system that meets the highest demands. The advanced, freely programmable CNC control system allows flexible intervention via touchscreen under any production conditions and comes standard with our PFEIFER technology skycnc WK series routers. With this CNC control, you can create your machining data or import CAD/CAM files, which can then be processed independently of a computer. Ksdpfxsbnpgxe Ab Nodp The tool changer (up to 16 tools), the solid aluminum vacuum table, various tool/workpiece cooling solutions, automatic axis lubrication, and other thoughtful details complete this milling system. With the PFEIFER technology skycnc WK series, you get a reliable and high-performance large-format gantry milling system for your applications. On request, we supply matching CAD/CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems, or ArtCAM Pro / ArtCAM Insignia software in German/Russian and others upon request. - Drive system: Ultra-precise ball screws on X, Y, and Z axes, made in Germany - Working speed: 15 m/min - XYZ working area/travel: 2050 x 3050 x 220 mm - Table size (vacuum table with integrated vacuum channels): 2000 x 3000 x 30 mm - XYZ repeatability: 0.02 mm - XYZ accuracy: 0.01 mm - Compatible with software such as Type3, ARTCAM, MASTERCAM, FeatureCAM, etc. - Formats: ISO standard G-code, FANUC compatible - Options: Spindle motor/tool changer/vacuum table tailored to customer requirements - Warranty: 1 year - Spindle power: from 5.5 kW (other power options available) - Spindle speed: 6,000 - 24,000 rpm (depending on requirements) - Spindle mounting: BT30 / ER20 (other mountings optional) - Drive: AC servo motors on all axes - Tool changer: 4-8 magazine slots - PDSP control RTU / MTU (Remote Terminal Unit) - Power supply: AC400V±10% 50Hz - Power consumption: 10-15 kW (depending on configuration) - Dimensions: 4500 (L) x 3100 (W) x 2500 (H) mm - Weight: 4000 kg