Mütek Systemtechnik Mpp 60 pirkti naudotą (22 116)

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Machine available at special price Machine available immediately (ex works Neckartailfingen) Demonstration model Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine Including control cabinet with timer operation The press is started manually and then runs until the set time on the timer (e.g. 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm *depending on material Output capacity up to max. 25 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Nodpsfci D Asfx Acaewi Raw material requirements: -Wood chips and dust less than 15 mm in length -Moisture content below 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor 3 kW instead of 2.2 kW, Surcharge + €690 net (Delivery time approx. 8 weeks) ---

Gamybos metai: 2026, būklė: naujas, *The offer is only for the neodymium overband magnet, not the underlying conveyor belt. *Neodymium magnets are among the strongest magnets in the world. They have extreme holding force and should not be compared with ferrite magnets. Extremely high separation efficiency, depending on material layer height and input material. Probably the most compact overband magnet on the market. Competitors often use less powerful ferrite magnets to save costs. Approximate dimensions: Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Control unit not included Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm *Nails are attracted and discharged to the side along a length of 600 mm, outside the magnetic field. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer, depending on the maximum length of metal parts. Ideal for separating nails from wood chips. Optionally usable in a single-shaft shredder with extraction. Requirements: *Your belt width, or effective internal width (of the existing conveyor belt), should ideally be less than 55 cm. *Suitable for separating nails from material streams with a height less than 12 mm, and chip lengths smaller than 25 mm. ----- Optional at extra charge: Cross and incline belt demonstration units from €8,770 net. Nwedpfx Asdubpuscaei

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Demonstration machine with approx. 9 operating hours One more machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput capacity We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you may send your material to us via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple turning positions Option of double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting unit opening: 630 x 820 mm Hopper volume approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (10 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% a.d. (absolutely dry basis) Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC controller - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off when rotor is idling - Speed 70-90 rpm for high throughput - Cycling control to minimize idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE conform. Optional shredder features at extra cost: - Raise shredder height by 30 cm (preparation for conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net Nsdpfjb Ny Eysx Acaswi - Special scraper + €990 net (recommended for shredding veneer or paper, or material thickness less than 3 mm) - Angled conveyor belt + €8,770 net Angle: adjustable 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overband magnet + €5,980 net Alternatively, fixed magnetic block over the conveyor belt for manual cleaning + €990 net (for low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop each synchronised with the shredder) Alternatively, manual start and stop of the belts + €595 net Material requirements: - Moisture content (a.d.) must be less than 30% - Installation temperature: heated area with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time: approx. 4–5 months Your advantages: + Extremely large cutting unit opening: 1300 x 1200 mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful with 37 kW start-up power Technical data: Color: grey / blue Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Nwedpfxogbkkro Acaei Rotor speed (RPM): 65–125 Power requirement (kW): 37 Screen perforation (mm): 10–40 (selectable) Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions (LxWxH): 2,430 x 2,410 x 1,735 mm Weight (approx. kg): 3,500 Options at extra cost: - Second knife row, for up to 30% higher throughput - High-speed hydraulics for increased throughput - Preparation for discharge conveyor - Discharge conveyor - Overband magnet HAWK-EYE *To shred veneer or paper (anything thinner than 3 mm), we recommend a segment floor. Special option, available at extra cost. --- Slider extension option *available at additional cost Maximum pallet size: up to 1200/1400 mm (with slider extension option, the upper cutting unit opening is 1300 x 1700 mm, surcharge: + €14,975) *significantly longer production time required. *Larger machines available on request --- Raw material requirements: - Moisture content (oven dry basis) must be below 20% - The feed material must be free from metals and mineral impurities. Tool damage and/or increased wear may otherwise result.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, veikimo valandos: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to a maximum of 10 pallets per hour *Screen and material dependent. Significantly higher throughput for smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 ph, Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm Feed opening 1000x1000 mm Nedex Af Rdjpfx Acajwi Dimensions: 2000x1800x1645 mm Sample image above: machine color may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - Fast hydraulic system - Automatic shut-off when rotor runs idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €6,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (Start and stop in sync with the shredder) - Enlarged hopper 1500x1500 mm + €3,480 net Requirements for input material: - Moisture content (atro) must be below 25% - Material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Būklė: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net Nwedpfx Acefmqq Ejasi - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Būklė: naujas, Gamybos metai: 2026, Ideali mašina minkštos medienos smulkinimui. . Variklis: 11/15 kW; 400 V - 50 Hz - 3 fazės, Rotoriaus skersmuo: 260 mm, hidrauliškai valdomas stūmiklis Kieto sieto angos pagal pageidavimą (12 - 40 mm) Ištraukimo jungtis Ø 160 mm Svoris apie 1.100 kg Išmatavimai (ixpxa) apie 1805 x 1118 x 1650 mm Spalva: mėlyna / pilka Reikalavimai žaliavai: - Drėgmės kiekis (absoliutus) turi būti mažesnis kaip 30 % - Metalai ir mineralinės priemaišos, tokios kaip smėlis, akmenys ir pan., sukelia padidintą susidėvėjimą. Njdpfxswzarcj Acajwi . Maloniai kviečiame atlikti nemokamą bandymą su Jūsų medžiaga. Kviečiame Jus atvykti į Neckartailfingen. Taip pat galima, kad atsiųstumėte savo medžiagą per siuntų tarnybą, o bandymo eigą užfiksuosime nuotraukomis ir vaizdo įrašais.

Būklė: naujas, Gamybos metai: 2026, Single-Shaft Shredder MRZ 530 Includes: + Profile rotor for increased throughput capacity Options: Double blade row + €895 net Veneer and paper stripper + €970 net * Recommended for extremely thin materials with a thickness less than 3 mm Our mütek Single-Shaft Shredder MRZ 530 processes a variety of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine features a robust construction ensuring consistent quality in continuous operation. We are happy to offer a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us by freight forwarding and we will document the test with photos and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: reversible multiple times, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm): 510 x 810 mm, Hopper volume: approx. 0.4 m³, Throughput capacity: 1 - 5 hopper fillings/hour, Hydraulically operated pusher, Screen perforation as required (10 - 40 mm), Extraction connection Ø 160 mm, Weight: approx. 1,000 kg, Dimensions: approx. 1550 x 1100 x 1640 mm, Moisture content of raw material must be under 30% (absolutely dry). Nwedpfxjd Db N Is Acaji Standard equipment included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC • Automatic star/delta starting • Automatic shut-off in case of rotor idle • Removable extraction chute • Speed 70 - 100 rpm for higher throughput • Intermittent control to avoid idle times • Performance-enhancing step control for hydraulic pusher • Stable guides for hydraulic pusher Additional shredder options: - Raise shredder by 30 cm (conveyor preparation): +€1,980 net - Angled conveyor belt: +€8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm +/- 100 mm - Overband magnet: +€5,980 net - Control for conveyor belt and overband magnet: +€2,750 net (Start and stop each synchronized with the shredder) Requirements for input/raw material: - Moisture content (absolutely dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Būklė: naujas, Gamybos metai: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening: 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multiple reversible Hydraulically operated pusher Screen perforation of your choice (10 - 40 mm) Extraction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo coupling Nwsdpfx Asd Dgw Uocaji Standard equipment includes: - automatic star-delta start - fast hydraulic system - automatic shut-off when rotor is idling - Speed: 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control for the hydraulic pusher - pertinax guides for the hydraulic pusher - vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF panels, and other materials (subject to testing and approval by the manufacturer) Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Adjustable angle: 0-60 degrees Discharge height: approx. 2000 mm ± 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - Moisture content (upon arrival) must be below 30% - Installation temperature: heated indoor area, at least +5°C - Metal and mineral impurities such as sand, stones, etc., lead to increased wear

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology Njded Nnwlspfx Acaewi + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net

Gamybos metai: 2025, būklė: naujas, Granulator MVZ 7.5 kW Demonstration unit available at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled plastic parts or for re-shredding wood chips. Further details can be provided after testing with your material. Our granulators are used for the size reduction of a wide range of materials such as plastics or wood. Shredders and granulators are suitable for diverse shredding tasks across various applications. For example, defective parts and sprues arising at injection moulding machines need to be reprocessed. In blow moulding operations, besides rejects, there are also waste pieces or startup hoses. Materials that can be processed include, among others, blow moulding materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes. Material is fed from above via a hopper into the cutting chamber of the granulator. The rotor inside is equipped with cutting knives. The material is shredded between the rotating blades and the stationary knives until it reaches a defined granulate size and passes through the screen beneath the rotor. *Optionally, the processed material can then be conveyed pneumatically to Big Bags, silos, or other containers. The price applies only to the granulator system as shown in Image 1 – fan, cyclone, and filter are optional. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput: up to 120 kg/h when shredding plastics *highly dependent on screen and material Application example: Size reduction of PE 1000 plastic Input material: approx. 40 mm chip length Final granulate size: approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ For G 30 wood chip re-shredding, significantly higher throughputs are possible – up to max. 400 kg/h with a 10 mm screen. *Metered feed, e.g. via conveyor belt or auger. Details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Dimensions: 930x730x1420 mm Weight: 450 kg Exhaust connection: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – additional screens available Price per screen: €390 Price for spare knife set: €679 Suitable for, e.g.: - All types of plastic waste Materials such as HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs, etc. Items from injection moulding, blow moulding, injection moulding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger systems are also available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Infeed opening: 620x400 mm *Optionally with matching extraction/transport system Nsdod N Dn Dopfx Acaewi Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Infeed opening: 620x500 mm *Optionally with matching extraction/transport system --- The following information is required for machine configuration: - Length x Width x Height of input material? - Screen size required (to what granulate size)? - Desired hourly throughput in kg? - Wall thickness in mm? - Material description Photos may also be helpful.

Būklė: naujas, Gamybos metai: 2026, Extremely Powerful Industrial Magnet for Iron Separation Special price €990 net (Shipping €14.90 net) *Refer to image 2 for construction lengths The active side features a stainless steel end plate (material grade 1.4301). Threaded holes are provided on the rear side for mounting *Handle available upon request Block magnet systems can be used at operating temperatures up to max. +100°C. The magnetic surface should be routinely cleaned of collected ferrous materials. Pick-up heights for all versions, e.g.: Approx. 60 mm for an M5 steel nut Approx. 100 mm for an M5 x 30 screw Nwjdpfxetqfhxo Acaji Installation example 1: Mounted above a conveyor belt, the iron parts "jump" to the magnet’s active surface. Installation example 2: Integrated in a pipeline system with direct contact to the material flow. For maximum separation reliability, a cascade arrangement of multiple block magnets in series is possible. Installation and safety instructions: During handling, unpacking, and installation, ensure no loose ferrous parts (such as tools or screws) are nearby. The magnetic force is extremely strong and can cause painful injuries if fingers are caught between ferrous parts and the active surface. No steel components should be present within a minimum distance of 400 mm beneath the active side.

Būklė: naujas, Gamybos metai: 2025, The ideal machine for shredding both hardwood and softwood. Another unit is now available (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Knives: 14+2 pieces, 40x40 mm, reversible multiple times Nsdped E R D Ssfx Acaowi Rotor diameter: 260 mm Control system: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated pusher Screen perforation as required (12–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm The following options are available at extra charge: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor on all 4 sides + €2,170 net (prevents the pusher from jamming; recommended for material less than 3 mm thick) - Shredder raised by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely required; closed, extra sturdy rotor bearing. Worth considering for screens smaller than 15 mm or with a high proportion of fines. Not necessary if the bearings are lubricated with grease approx. every 2 weeks during operation) Raw material requirements: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc., lead to increased wear. We are happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via freight forwarding, and we will document the test with photos and videos.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Machine with Special Rotor Available immediately Advantages: + Special rotor with reduced blade projection + 22 kW motor + Efficient square blades Nwsdpfx Ajdv Eu Hjcaoi *For pallets: up to 10 pallets per hour *(dependent on screen size and material). Significantly higher throughput for smaller wood remnants. Motor: 22 kW; 400 V - 50 Hz - 3 ph Screen: 15/20 mm Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Extraction port Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: System color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown in case of rotor idle - Speed 70-90 rpm for high throughput - Interval control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant The following options are available at extra cost: *As shown in the last 2 images. - Additional blade row + €2,790 - Segmented floor + €6,890 (recommended for materials with wall thickness less than 3 mm) - Special K-rotor bearing + €3,480 (Consider for plastic shredding with screens smaller than 15 mm or high fines content. Not necessary if greasing the bearings with lubricant every ~4 weeks during operation) - Raise shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overbelt magnet + €5,980 net - Control unit for conveyor belt and overbelt magnet + €2,750 net (Start and stop synchronized with shredder) - Outward-stretched feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 30% - Material feed must be free of metals and mineral impurities. Damage to the tools and/or increased wear may occur as a result

Gamybos metai: 2024, būklė: naujas, Overview – of the various configurations *not every position is needed: Optional: Nwjdpfx Aeff Sbijcasi - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstration unit with discharge (only shown schematically in the image) *optional, if feeding with wheel loader is desired Unit price net from €14,750 – demo unit - De-dusting screw conveyor – length approx. 4 m Four sieves are mounted on the underside, which are extracted. Unit price net from: €9,750 - Extraction components / hoses flat rate €945 net - Control system for entire plant Unit price net: €2,750 - Demonstration extraction unit MMJET 160 demo, with cleaning function Connection 160, Fan 2.2 kW Air capacity 1850 m³/400 V automatic compressed air cleaning Unit price net from: €6,950 - Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour at +/- 20 kg tfrom €59,995 net *A reference system (baler) is located at ZIP code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height adaptable upon request) Weight of bale +/- 20 kg (depending on material) Capacity: approx. 30 bales per hour Storage bin approx. 0.7 m³ volume Fill level sensors for min./max. fill level in the bin Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale ejection Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 kg mütek balers / packaging machines were developed for producing bales from various materials such as shredded miscanthus or elephant grass, wood shavings, sawdust, and shredded straw. The machine features robust construction, ensuring consistent quality during continuous operation. The baler compresses the material filled in the storage bin without any additional binding agents by means of hydraulic pressure and packs the material in plastic bags. The machine allows significant volume reduction, depending on the material. Maximum material moisture must not exceed 18% Atro. The mütek baler’s container can be filled automatically or manually and has a capacity of approx. 0.7 m³. Containers with larger volume or with integrated extraction and filter systems as a complete disposal unit are also available. In addition to automatic filling via de-dusting units, mütek also offers filling by means of screw conveyors. Both variants allow automatic dedusting. mütek balers are equipped with a control cabinet for system management. In the standard version, bale dimensions (width x depth x height) are 400 x 400 x 800 mm. Upon request, height can be adapted to your requirements. The following advantages result from baling: - Simple and safe storage - No loose dust - Minimization of storage volume - Low transport volume *Raw material requirements: - dry (max. 30% ATRO) - max. 35 mm length

Būklė: geras (naudotas), Refurbished Used Machine *Options available at extra cost, see below with full 1-year warranty Available for delivery approx. 16 weeks after order Technical Specifications: Throughput capacity up to max. 1200 kg/h depending on material (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter 75 mm including 2 m press channel Main drive motor 45 kW Feed screw geared motor 2 x 2.2 kW Compactor screw 2 x 5.5 kW Distributor screw 2.2 kW Hydraulic pump motor 0.37 kW Total connected load 65 kW Control panel with plain text display for operational states and load indicator for main drive and feed screws PLC control Siemens S7/300 with hour meter in the control cabinet Machine has CE marking Nwsdpfj E Dquox Acasi Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Silo for MAP series (only suitable for one press of type MAP 1200) - Buffer silo above the machine - Capacity approx. 6 m³, robust steel construction with agitator discharge and level sensor. €19,700 net plus VAT - Temperature control unit for press tools For maintaining temperature to achieve optimal briquette quality. Temperature control for pump, cooler, fan, pressostat Ready-wired for operation – mandatory for use including corresponding control system €7,850 net - Guillotine for briquette length cutting Compressed air connection required on site €6,940 net plus VAT - Conveyor line / cooling section (Nominal value: 4x2m) per 2 meters €990 net Assembly / Commissioning (Nominal value per press approx. 2-3 days on site) Charged according to effort based on evidence, invoiced separately. The following rates apply: Service technician/mechatronics technician per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Per diem allowance per fitter per day: depending on country Per car/van and travel kilometer: €0.98 / km Arrival and accommodation expenses reimbursed by invoice or by fixed rate at the buyer's expense. Test with customer's own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net ---- Raw material requirements: - The (absolute dry) moisture content must be between a minimum of 6 and a maximum of 18% - Maximum chip length 20 mm - Installation temperature: climate-controlled room, minimum +5°C - Feedstock must be free of metals and mineral contaminants. Damage to the press tools and/or increased wear may otherwise occur.

Būklė: naudotas, Smulkinimo mašina MGZ 1330, 37 kW Darbo valandos: 275 Įskaičiuota: - 2-asis peilių eiliškumas - Greita hidraulika didesniam našumui - Paruošta konvejeriniam juostai Nwsdpfx Acox Tfdhoaei Pasirenkama: - Konvejerinė juosta su automatiniu metalo separatoriumi Jūsų privalumai: + itin didelė pjovimo agregato anga; viršuje: 1300x1200 mm + specialus rotorius, tinkamas tiek kietmedžiui, tiek minkštmedžiui + energiją taupanti ir galinga su 37 kW paleidimo galia Techniniai duomenys: Pajungimo anga viršuje (mm): 1.300 x 1.200 Piltuvo talpa (m³): 1,6 Rotoriaus skersmuo (mm): 368 Rotoriaus greitis (aps/min): 65–125 Galingumo poreikis (kW): 37 Sieto skylės (mm): pagal susitarimą Įrankiai: 37/70 peilių Ištraukimo antgalio Ø (mm): 200 Matmenys: 2430x2410x1735 mm (ilgis x plotis x aukštis) Svoris (apytiksliai kg): 3.500 --- Reikalavimai žaliavai: - Drėgnumas (atro) turi būti mažesnis nei 20 % - Tiekiama medžiaga turi būti be metalo ir mineralinių priemaišų. Priešingu atveju gali kilti įrankių pažeidimų ir/ar padidėti susidėvėjimas.

Gamybos metai: 2007, būklė: naudotas, Mašina (papildomai): likutinio skysčio, dugno, kaklelio, šoninės sienelės kontrolė Galia: 3,6 kW Įtampa: 400 V Dažnis: 50/60 Hz Suslėgtas oras: min. 6 – maks. 10 bar Ilgis: 2,5 m Plotis: 1 m Aukštis: 2,5 m Formatų tipai: Longneck, Steini, Vichy 0,33 l buteliai / Longneck 0,5 l, NRW 0,5 l buteliai Nodsxbpg Hepfx Acaowi Judėjimo kryptis: dešinė – kairė Valdymas / kontrolė: Heuft Įranga: likutinio skysčio, dugno, kaklelio, šoninės sienelės kontrolė Svoris: 1700 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, keliamoji galia vienai sandėliavimo sekcijai: 3 000 kg, bendras ilgis: 43 500 mm, bendras aukštis: 3 500 mm, tarpas tarp stulpų: 2 700 mm, lentynos aukštis: 3 500 mm, lentynų eilučių skaičius: 5, padėklų vietos: 135 euro padėklai, rėmo aukštis: 3 500 mm, rėmo plotis: 1 100 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentyna ilgis: 43 500 mm, atrama ilgis: 2 700 mm, 5 eilių padėklų stelažai (5 x M35112711-2) Eilės ilgis po 8,5 m, aukštis 3,5 m, gylis 1,1 m, kiekvienoje eilėje po 3 sekcijas, plotis – 2,7 m, kiekvienoje eilėje po 2 perimetrų lygius, lentynos apkrova – 3000 kg. Njdpfx Aeza R Ecjcaswi - 20 rėmų (RM3511 - RAL5019) - 40 pagrindų plokščių, pagrindo medžiagos, tvirtinimo medžiagos - 80 grindų ankerių (ZZBA1210) - 60 pavienių skersinių (T27114 - RAL2008) - 5 apkrovos žymeklių (BSMcP) Rėmai prisukami, nesurinkti iš anksto. Pervežimas / pristatymas: - ne vėliau kaip per 20 darbo dienų po apmokėjimo - pristatymas į objektą / montavimo vietą - iškrovimas iš sunkvežimio – pirkėjo atsakomybė, naudojant savo kėlimo įrenginį - Pristatymas visoje Vokietijoje, išskyrus salas - Pristatymas į ES valstybes pagal individualius susitarimus.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, bendras svoris: 150 kg, bendras aukštis: 2 300 mm, bendras ilgis: 1 200 mm, bendras plotis: 600 mm, valdiklio modelis: SPS-Steuerung, darbinis plotis: 300 mm, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, suslėgto oro jungtis: 6 juosta, apkrova vienai atramai: 50 kg, stalčių skaičius: 1, pozicionavimo tikslumas: 1 mm, darbinio aukščio: 30 mm, darbinis ilgis: 400 mm, darbo diapazonas: 400 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, Feeding and storage system for light articles in goods carriers. Tray feeding for magazine loading in automated production. Specifically designed for components sensitive to surfaces or contours. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30 mm • Fast tray changeover time (4–8 seconds) • Tray weight including workpieces max. 5 kg • Tray stacker weight max. 50 kg • Positioning accuracy ± 1 mm • PLC control with operator and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication preparation – Siemens IWLAN client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door lock • Small footprint due to compact design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust design (solid steel construction, powder-coated) • No machine adapters required • Power supply 400 V / 50 Hz / 3ph • Minimum compressed air connection 6 bar Nwedpfx Acsyx Hgbjaei • Dimensions: 1200 x 600 x 2300 mm (LWH)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, frezos galvos padėtis: mittig, veleno greitis (maks.): 60 000 aps./min, bendras aukštis: 1 550 mm, bendras ilgis: 1 870 mm, bendras plotis: 1 040 mm, sukimosi greitis (maks.): 60 000 aps./min, įvesties srovės tipas: trifazis, bendras svoris: 560 kg, darbo diapazonas: 420 mm, garantijos trukmė: 12 mėnesiai, pavaros tipas: Linearmotor, Įranga: sūkių greitis be galo kintamas, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the increasing demands of the production process. PCBs of various materials are separated using dust-free and low-stress sawing and milling techniques, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, advanced tooling, and gripping systems meet the highest quality standards, guaranteeing the machine's long service life and reliability. Semi-automatic depaneling – tailor-made solutions The LOW 4322 enables rapid product changeovers while maintaining short separation and handling times. Loading of panelized PCBs is done with a parallel shuttle system, with positioning and clamping using pin-clamping technology, optionally in combination with vacuum suction, when required. Made in Germany The machine is equipped with: • One shaft and disc tool separation module on the Z-axis (automatically rotatable 0–90°) • X-Y cross table module using linear motor technology with high-resolution scale system • Dual loading module set up as a parallel shuttle, separated left/right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming Nwedoxt Dk Repfx Acaoi • Working area: 420 x 330 mm per side • Automatic milling cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage detection (for shaft cutters only) • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant Optionally, a dust extraction unit can be retrofitted upon request.

Būklė: geras (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, konvejerio juostos ilgis: 3 000 mm, konvejerio juostos plotis: 400 mm, Įranga: Tipinė plokštelė prieinama, Belt conveyor with speed controller by RK Schmidt Systemtechnik, year of manufacture 2022, dimensions LxWxH 3000x400x900 mm, aluminium frame with rollers, 3 units available. Njdstr T Irepfx Acajwi

Gamybos metai: 2023, būklė: naujas, Funkcionalumas: visiškai funkcionalus, You can view this machine at the Anuga Tec Cologne trade fair until 22.03. Hall 8 Stand B 079 with PVS. Njdpfxjivikxe Acaowi Shredding and emulsifying machine for various products such as: - Meat - Sauces - Soups - Pesto - Ketchup - Mayonnaise - Rework applications (e.g. bakery products, etc.) - Nut pastes - Pharmaceutical applications (e.g. in heparin production).

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Parduodama pilnai veikianti atpjovimo linija. Gaminio ilgis: 750–1400 mm, gaminio skersmuo: 75 mm / 100 mm, maksimalus išlinkis ties 1400 mm: 10 mm, tolerancija ties 75 mm: +/-5 mm, tolerancija ties 100 mm: +/-9 mm, darbo valandos: 20 653 h. Linijos komponentai: 1) Harald Baumgarten atpjovimo staklės. 2) Sema Systemtechnik ryšulių padavėjas. 3) Strypų laužymo įrenginys. 4) Strypų sukimosi pavara ir matavimo stotis. 5) Svarstymo stotis su atpjovų rūšiavimu. 6) Ištraukimo ir filtravimo sistema. 7) Garso izoliacijos kabina su apsaugine tvora. 8) Winter keturių kolonų presas. 9) Hidraulinis agregatas su siurbliais. 10) Valdymo spinta ir operatoriaus pultas. Yra dokumentacija. Apžiūrėti galima vietoje. Tikimasi, kad bus prieinama nuo 2026 m. gegužės mėn. Nwodoyu T Enopfx Acaei

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2020, Parduodama Expert Systemtechnik vandens srovės pjovimo įranga su aukšto slėgio BFT siurbliu. 1) Pjovimo įrenginys: Expert Systemtechnik cutEXPERT variojet, pagamintas 2020 m., skirta pjauti: odą/porolonus/techninius audinius/gumos gaminius/kompozitines medžiagas/pakuotes, maksim. pjovimo greitis: 70 m/min, pakartojimo tikslumas: +/-0,2 mm, vandens sąnaudos: apie 0,2 l/min, pjovimo matmenys X/Y: 1800 mm/3000 mm. 2) Aukšto slėgio agregatas: BFT Servotron 40.45+, pagamintas 2020 m., variklio galia: 45 kW, maksimali našumas: 4,6 l/min, projektinis slėgis: 4200 bar, maksimali darbinis slėgis: 4000 bar. Įrenginio matmenys X/Y/Z: apie 2000 mm/1000 mm/1400 mm, svoris apie 1200 kg. Yra dokumentacija. Galima apžiūrėti vietoje. Nwedpfxjxmkcme Acasi