Thermatool Suvirinimo Įrenginys Af Cfi 200Kw pirkti naudotą (27 497)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, TRUMPF TruDisk 5001 (6C) * Year of manufacture: 2017, mint condition * Laser power: 5 kW * Wavelength: 1030 nm Iedpfeqfguajx Alreau * Beam quality: 4 mm mrad * Beam switch with 4 fiber outputs, minimum fiber diameter: 100 µm * Fiber connector: LLK-D * Optional: Fieldbus interface & IIO3 card available * 2 units available

Gamybos metai: 2015, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, The Sv‑63P pneumatic butt welding machine features a robust vertical frame design incorporating vertical clamping jaws and a sliding movable platen. Clamping is performed via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages connected to a horizontal cylinder for pressing the workpiece together. The carriage travel is limited in both directions—for both pressing and opening—and the clamping jaw distance can be adjusted according to the cross-section or diameter of the workpiece. Clamping with a preset jaw distance is actuated by foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding modes. After welding, the clamping jaws are lifted and the carriages return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage regulation is achieved using thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws through laminated conductors. Inside the machine, a power board with a thyristor and a main control board ensure smooth operation. An air preparation unit with a pressure regulator for setting the clamping force is located on the machine cover. The main switch to activate the unit is located on the controller for setting welding parameters. Iodpfsyqr Sxox Alroau

Būklė: beveik kaip naujas (parodų įrenginys), ⭐ FRONIUS TPS 4000 ⭐ Fully Equipped Device description / Scope of delivery: Fronius TPS 4000 unit with full equipment – nothing more can be added! - Power source Pulse 400 amps - FK 4000 FC cooling unit with the optional filter, including Flow Control (==> if no water is circulating, the unit switches off to protect the hose package). - VR 4000 with the optional rollers at the bottom + long interconnection hose package + metal feed rollers – only the best components installed. - Fronius AW5000 welding torch with Job Master function on the torch (==> display on the torch / amperage, job selection, wire feed, arc adjustment all adjustable on the torch) Photo = scope of delivery. All prices listed are base prices. Prices are created individually according to your configuration requirements. Original price approx. €15,000 (net), we offer it for 1/3 of the new price. Not comparable with Transsteel scrap. Why buy from us rather than elsewhere: Iaedpfxevlwh Dj Alrsu - We are professionals when it comes to this Fronius welding machine series. We continuously stock around 60–80 units. Only these Fronius machines, no other brands! - We don’t just resell the units; we disassemble, inspect, replace wear parts as needed, and only sell the units when everything is in perfect working order. - All our units are sold with premium Fronius torches. NO €100 budget torches from E*b*a*y, but QUALITY! The Fronius torches cost (depending on specification) between €650 and €900 net! - All our units are clean and have no burn holes in the displays or countless burn marks/dents on the casing! You are buying an item from us that is presentable and not worn out! - As our customer, you have the opportunity to obtain suitable spare parts and support at favorable rates if needed. - You will receive a proper invoice from us with itemized VAT. All units can be inspected, paid for, and collected by appointment at our main warehouse in Vienna! Insured shipment on a pallet is of course possible! All prices are base prices; you can configure the units with us. Robot version or manual version. Long or short interconnection hose packages. Various hose packages available. Synchropulse. 270, 400 or 500 amp units in stock. CMT version available for both manual and robot operation. Best to call us, we discuss your application and you’ll get an initial price estimate from us.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, skirtas išplėstiniam vidutiniam ir stipriam naudojimui. Su perjungiama galios lygių sistema bei režimo valdymu platesniam naudojimo spektrui • Valo ir pasyvuoja vienu žingsniu • Gali apdoroti bet kokį nerūdijančio plieno storį • Elektropoliravimas galimas • Mažos eksploatacinės išlaidos • Nebrangios veikliosios medžiagos ir atsarginės dalys taupo laiką • Iki 10 kartų greitesnis nei naudojant beicavimo pastą • Nereikalingas papildomas apdirbimas Isdpsyx Sq Ejfx Alrsau • Nereikia papildomo šlifavimo ar poliravimo Lankstus ir tvirtas • Idealiai tinka dideliems daiktams • Ilgaamžis didelio našumo šepetys • Apsaugotas nuo purslų korpusas • Nekaista įrenginys • Kabelį galima pailginti iki 12 metrų • Dirba su 250 W galingumu • Gali būti naudojamas su generatoriumi

Būklė: paruoštas naudoti (naudotas), Control range: 30 - 300 A Iaedpfx Ajwvixuslrsu Max. welding current at 60% duty cycle: 240 A Max. welding current at 100% duty cycle: 180 A Electrical connection: 400 V Dimensions (L x W x H): 1050 x 450 x 810 mm Weight: 132 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, MIG-MAG welding unit Adjustable welding current: 50 - 400 A Max. welding current at 45/60/100% duty cycle: 400/345/265 A Open circuit voltage: 16.5 - 45 V Isdpfx Aewx Hz Ejlrsau Standard wire feed for steel: 1.0 + 1.2 mm Wire feed speed: 1 - 20 m/min Electrical connection: 380 V Weight: 164 kg Required space: 950 x 550 x 850 mm

Būklė: naudotas, Power source for orbital welding unit MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding unit MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Serial number welding source: 9885186 Serial number cooling unit: 97861? Output: 200 Amp at 20% duty cycle 90 Amp at 100% duty cycle Ijdpfx Ast Awm Djlrjau Power supply: 230 Volt, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 meter connection cable - Output adjustment from 1 to 200 amps - DC current only - HF ignition - Cooling unit for torch cooling - 44,895 operating hours (read from display) - Operating and maintenance manual Dimensions welding machine (L x W x H): 550 x 360 x 500 mm Dimensions cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Without accessories Price is for a set consisting of 1x power source and 1x water cooler.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, lazeri tipas: šviesolaidinis lazeris, lazdo šaltinio gamintojas: Rofin, lazerio šaltinio modelis: FL40, lazerio galia: 4 000 W, lazerio bangos ilgis: 1 070 nm, įėjimo įtampa: 400 V, įėjimo srovė: 40 A, įėjimo dažnis: 60 Hz, įvesties srovės tipas: trifazis, We are offering this Rofin FL40 laser welding machine in very good condition, year of manufacture 2017. Rated power: 4000 W Iasdpfx Alszcf T Tjrou Power range: 10 - 100% Laser beam quality: 3 - 4 (Multi Mode 100 µm) mm·mrad Power stability: ±2% Pulse frequency range: CW - 5 kHz Wavelength: 1070 ±10 nm Maximum possible power (950-1100 nm): 8000 W Maximum possible power (1100-1150 nm): ≤100 W Supply voltage: 3 x 230/400 V ±10% or 3 x 277/480 V ±10% Mains frequency: 50 or 60 Hz Apparent power at module start of life: 12.7 kVA Active power at module start of life: 11.8 kW Current consumption 400 V at module start of life: 18.4 / CCU: +0.5 A Apparent power at module end of life: 15.2 kVA Active power at module end of life: 14.2 kW Current consumption 400 V at module end of life: 22 / CCU: +0.5 A Current consumption 480 V at module end of life: 18.3 / CCU: +0.5 A Fuses: 40 A If you have any questions or need further information, please feel free to send us a message or give us a call.

Būklė: naudotas, TIG welding machine, Electric welding unit KESTRA Type WIG 350 AC/DC Arc welding machine Serial no.: Year of manufacture: approx. 1985 Output: 350 Amps @ 60% duty cycle Adjustment range: 3 steps with fine adjustment Current type: AC / DC Power supply: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with TIG torch - 2-stroke / 4-stroke welding function - Water-cooled - Gas pressure regulator Dimensions (L x W x H): 1050 x 560 x 900 mm Weight: 250 kg The welding test shows good results when welding stainless steel with direct current Isdpfedzql Sox Alreau and good results when welding aluminum with alternating current. The HF ignition is non-functional; however, the arc can be initiated via brief contact.

Būklė: naudotas, TIG Welding Machine L-TEC Model Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial no. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustable range: stepless Current type: DC (direct current) Power supply: 400 V, 50 Hz, 32 amp plug - 4 meter torch package with central connector and hand torch - with remote potentiometer (foot pedal) - gas pressure regulator - Direct current only = DC - HF ignition Iodpjdzqb Eefx Alroau Dimensions W x D x H: 850 x 480 x 740 mm Weight: approx. 150 kg Welding test delivers very good results when welding stainless steel with direct current. Otherwise in good condition.

Būklė: naudotas, Welding fume extraction unit for wall mounting, Extraction device KEMPER type 85400 Serial no. 279092 Year of manufacture: 1997 Air flow rate: 1,700 m³/h Static pressure: 2,000 Pa Extraction connection: Ø 250 mm Motor output: 1.5 kW Power supply: 400 V, 50 Hz - Radial fan - Designed for mechanical air filter with approx. 99% separation efficiency - Main filter defective (additional charge for new main filter: €195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long Iaedpfou S Tfgox Alreu - Extraction arm with 3 joints and extraction hood (adapter connection to filter housing missing) - External control system missing, no filter monitoring, no start switch - Air outlet: 250 x 140 mm Space requirement (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Additional charge for new main filter: €195 net

Būklė: naudotas, TIG Welding Machine DALEX Type GL/W 201 TIG Welding Unit Machine No.: 201 Year of manufacture: approx. 1995 Output: 200 Amp, 35% duty cycle 160 Amp, 60% duty cycle 120 Amp, 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 5.9 kVA, 32 A plug - 2-stroke and 4-stroke welding function - TIG hose package 8 meters - HF ignition - Shielding gas pressure regulator - MMA welding for stick electrodes - Fan cooling - Connection socket for foot pedal (foot pedal not included) Iasdji E Izvjpfx Alrsu Dimensions (L x W x H): 850 mm x 450 mm x 700 mm Weight: 90 kg Welding test shows very good results when welding stainless steel with direct current. Otherwise in very good condition.

Būklė: naudotas, TIG welding machine, TIG welder NIMAK Type GS 200 W TIG and DC electric welding machine, E-welder also suitable for stick electrodes Serial No. 26642, Year of manufacture: approx. 1983 Output: 200 amps = 60% duty cycle 150 amps = 100% duty cycle Infinitely adjustable output range Power connection: 380 Volt, 50 Hz, 32 amp plug - 5 meter TIG torch package - HF ignition - Stepless current adjustment and current rise Iaedodzqbvjpfx Alrsu - Connection for electrode welding - DC only - Water-cooled - Shielding gas pressure regulator Space required (L x W x H): 900 x 590 x 1000 mm Weight: approx. 200 kg Good condition

Būklė: naudotas, Plasma cutting machine MB - Welding Technology Model Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Output: 50 amps = 35% duty cycle 30 amps = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Mains connection: 400 V, 50 Hz, 32 A plug Iaodpfjdzqa Hjx Alreu Dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg In good condition

Būklė: naudotas, TIG welding machine, electric welder DALEX type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Output: 225 amps = 60% duty cycle; 125 amps = 100% duty cycle Adjustment range: 2.8 to 225 amps Current type: DC and AC (AC-DC) Power supply: 380 volts, 50 Hz - Power setting via 5 coarse stages and stepless fine adjustment via rotary potentiometer - 2-stroke and 4-stroke welding modes - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - TIG torch package, 4 meters - Welding gas pressure regulator valve - Water-cooled Iaodpfxedzqacs Alreu Space requirement (L x W x H): 1050 x 610 x 890 mm Weight: 290 kg In good condition

Būklė: naudotas, Welding Turntable – Welding Positioner with Enclosure Rotary Welding Fixture Load Capacity approx. 50 kg Chuck Diameter: 300 mm Chuck Speed: 1.0–15 rpm Power Supply: 230 Volt, 50 Hz - Scroll chuck with stepped internal jaws - Infinitely variable speed control via potentiometer - Driven by geared motor, left-hand rotation Iodpfx Aedzp U Iolrsau - Start via electric switch - Welding current transmission via slip ring contact - Fume extraction connection Ø 160 mm - Interior lighting Door opening (W x H): 715 x 1060 mm Internal dimensions (W x D x H): 780 x 780 x 1100 mm Required space (W x D x H): 900 x 900 x 2300 mm Weight: 190 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, EWM Phoenix 452 Puls Multimatrix MIG/MAG welding machine, year of manufacture: 2023. Unused, still in original packaging. Iedpfx Aetkuvxslrsau

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine units of the Cloos 403 are available. Year of manufacture: from 2005 to 2012. Other models of Cloos 503 welding machines are also in stock. Iajdpfx Aletkunujrju

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Cloos GLC 451 C welding machine. Year of manufacture: 2003. Comes with welding package. Iasdpfx Astkurislreu

Būklė: labai geros būklės (naudotas), 1 x TransPuls Synergic 5000R and 2 x TransPuls Synergic 4000R welding machines. Isdpfx Aotkuyiolreau Note: The price is for one welding machine only.

Būklė: naujas, Gamybos metai: 2025, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, Pluoštinis lazerinis suvirinimo aparatas su 2000 W lazerio galia 4 viename įrenginys - Suvirinimas su automatiniu vielos padavimu - Suvirinimas be vielos - Valymas - Pjovimas - Aukščiausios klasės įrenginys už puikią kainą iš mūsų ekspozicijos - Apie 10 darbo valandų - 2 kW MaxPhotonik lazerio šaltinis - Vokiečių kalba valdomas meniu - Universalus įrenginys suvirinimui / pjovimui / valymui - Komplekte 4 ritinėlių suvirinimo vielos padavimas - Integruotas vandens aušinimas - Yra sandėlyje Atkreipkite dėmesį ir į mūsų palankius lizingo / išperkamosios nuomos pasiūlymus. Mašinos matmenys (apytiksliai): Plotis: 60 cm Isdjug Unfspfx Alroau Aukštis: 120 cm Gylis: 110 cm Svoris: apie 150 kg

Būklė: naudotas, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with control panel MFT1 Iedpfopy Uzysx Alreau - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent control device, removable) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process supervision - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal type CPX Welding head mounted on horizontal guide rail and adjustable by 20 mm via pneumatic cylinder. 3 pneumatic cylinders for workpiece clamping provided (2 with 46 mm stroke, 1 with 20 mm stroke). Projection welding tip: 300 mm Welding tip height above floor: 315 mm Dimensions of welding unit (W x H x D): 410 x 760 x 700 mm Weight of welding unit: 75 kg Total weight: 100 kg 2 units of nearly identical design available, price quoted per complete unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Vandeniu aušinamos, suslėgtu oru valdomos taškinio suvirinimo replės Nimak L123 Labai gera naudota būklė, pilnai veikianti. Isdpfoxmuyvox Alrsau Prekės vieta: 75053 Gondelsheim Žiūrėkite nuotraukas Pristatymas per ekspedijavimo įmonę arba atsiėmimas vietoje

Gamybos metai: 1992, būklė: geras (naudotas), Geuma welding roller set, welding positioner set type GRS-SPE in neat, fully functional condition Iaodpfxelzcibe Alreu Comprising: 1 x powered 3 x idler rollers Specifications: - 7 kW - max capacity 31 tons - roller diameter 550 mm - width of 2 rollers side by side 950 mm - center of rollers from bottom of frame 340 mm - maximum adjustable width 2500 mm

Būklė: naudotas, Outstanding welding quality with advanced processes and capabilities • New inverter generation with 30% lower power consumption compared to conventional units. This performance results in significant energy cost savings. • More than 100 synergic characteristic curves for nearly all base materials (factory-equipped) • Process variety: - MIG/MAG standard - MIG/MAG pulse - MIG/MAG special arc types - MIG brazing - MMA welding (basic, rutile, cellulosic) - Gouging with electrode diameters up to 8.0 mm • High-performance equipment up to 500 A at 60% duty cycle Iodpfxjwwtwde Alreau • Automation interface A1, no additional interface cards required for simple, analogue integration • 99 memory locations • Password-protected parameter locking (fine adjustment within +/-20% still possible) • Program call-up via torch trigger • Simple polarity change