Stiller Sta 1500 pirkti naudotą (31 922)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, keliamoji galia: 1 500 kg, Įranga: kojinis nuotolinio valdymo pultas, 3 ašių PEMA suvirinimo suktukas APS 1500 - Nuolat reguliuojamas aukštis - Komplekte rankinis nuotolinio valdymo pultas Ppjdpfx Ajyupd Hjcasw - Maksimali apkrova: 15 000 N (1 500 kg) - Sukimosi greitis: 0,07–1,3 aps./min - Sukimo momentas: 1 000 Nm - Hidraulinis nuolydis iki 135° - Nuolydžio momentas: 3 000 N - Didžiausia suvirinimo srovė: 700 A - Plokštės skersmuo: 700 mm - Aukštis: 780–1 550 mm - Matmenys: 1 640 x 810 mm - Jungtis: 3 x 400 V / CEE 16A - Svoris: 730 kg

Gamybos metai: 1977, būklė: geras (naudotas), mašinos/transporto priemonės numeris: TH2001/0171-0173, DEMAG KBK Crane Suspension Crane Runway approx. 10x7m (7m Bridge) Multiple units of this crane are available! Load capacity / lifting capacity: 500 KG (0.5 tons) Technical data of the system: - Crane runway made of Demag KBK1+2 rails System is delivered complete: - KBK rails, rail connectors, trolleys, end plates, brackets/hangers, etc. Includes 500 kg electric chain hoist – lifting height approx. 3.5 m Pjdovdnivjpfx Acaopw Crane is dismantled and immediately available Used condition, see photos Item location: 75053 Gondelsheim Shipping by freight forwarder or pickup only by prior appointment Demag KBK1, KBK2, and KBK3 rails are available from stock! Other KBK systems are also in stock. Load capacity from 125 KG to 1600 KG Please inquire about your crane runway with required capacity and dimensions without obligation.

Būklė: labai geros būklės (naudotas), Pneumatic power clamp Manufacturer: DESTACO Model: 82L 3G-251C8HO Used, removed from machinery Length: 200 mm Ppjdpsq Evraefx Acaew Width: 35 mm Height: 75 mm 2 units available

Būklė: naujas, Gamybos metai: 2024, SCHORR Electric High-Lift Pallet Truck 1500kg Capacity - Various lift heights available (2500mm, 3000mm & 3500mm) Ppodpfx Aottgg Aecasw - Low-maintenance and easy to operate - Includes 24V batteries and charging station - 1.5t load capacity - NEW & in stock! Prices depending on lift height / variant: - 2500mm lift height: €3,613 - 3000mm lift height: €3,781 - 3500mm lift height: €3,949 SCHORR ELECTRIC HIGH-LIFT PALLET TRUCK 1500KG WITH LIFT HEIGHTS FROM 2500 TO 3500MM The SCHORR electric high-lift pallet truck allows you to move heavy loads of up to 1500kg. Depending on the chosen variant, it reaches a lift height between 2500 and 3500mm. The forks are 1150mm long, making them ideal for both single-use and Euro pallets. A major advantage is its retracted mast height of only 1745mm (2500mm variant), allowing it to pass through standard doorways. This model is particularly distinguished by its robust construction, and also features an integrated steel safety guard. Charging is extremely convenient thanks to the integrated charger: simply connect the truck to any standard 230V socket for charging. The high-lift pallet truck is equipped with a high-quality CURTIS controller. Control instruments such as the battery charge indicator, emergency stop, and keys are centrally located and always within the operator’s direct line of sight. Additionally, the SCHORR high-lift pallet truck offers various driving modes including a slow 'creep' mode (turtle mode). POWERFUL PERFORMANCE IN EVERY ASPECT The RR15HH electric high-lift pallet truck, with a rated capacity of up to 1.5 tons, can easily meet most warehouse requirements. The sturdy steel chassis not only protects against impacts, but its low-profile design also ensures excellent maneuverability. INTEGRATED CHARGER The high-lift pallet truck is fitted with two maintenance-free 12V lead-gel batteries (100 Ah) and an integrated charger. The unit can easily be connected to any regular 230V socket for charging. INTUITIVE CONTROLS The dual-handed control unit is very user-friendly. The use of proven, market-tested components ensures high ergonomics and ease of use. Travel speed can be controlled steplessly, and sensitive goods can be moved safely thanks to the selectable creep mode. Technical Data Manufacturer (short designation): SCHORR Manufacturer model: RR15HHE Rated capacity: 1.5t Model: 250E // 300E // 350E Own weight incl. batteries: 483kg // 495kg // 507kg Drive: Electric Tyres: Polyurethane Main Dimensions Overall length: 1740mm Overall width: 795mm Length including fork back: 590mm Lift: 2500mm // 3000mm // 3500mm Mast height retracted: 1745mm // 1995mm // 2245mm Mast height extended: 2924mm // 3424mm // 3924mm Fork dimensions (DIN ISO 2331): 60mm x 160mm x 1150mm Fork outside width: 570mm Aisle width with pallet 800x1200 lengthwise: 2040mm Turning radius: 1342mm Speed Travel speed with/without load: 4.0km/h / 4.2km/h Lifting speed with/without load: 0.09m/s / 0.14m/s Lowering speed with/without load: 0.11m/s / 0.1m/s Max. gradeability with/without load: 6% / 8% If you have any questions about our pallet trucks, the SCHORR team will be happy to assist you. You can reach our knowledgeable team by phone or email. We look forward to hearing from you and assisting you with your enquiry.

Gamybos metai: 2024, veikimo valandos: 2 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, DESTACO pneumatnis jėgos cilindras WK3000-30-6-1. Prekės nr. 0576762. Stūmoklio jėga prie 6 barų: 3000N. Didžiausia spaudimo jėga – 30 000N. Daugiau informacijos nuotraukose. 2024 metais pirktas tik testavimui. Galima apžiūra. Pardavimas be garantijos ir grąžinimo teisės. Pedpfx Acevb Di Toaepw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Puikiai išsilaikęs konservų gamybos įrenginys – skardinėms, mažai naudotas, trifazis su pneumatika. Kalbame angliškai, vokiškai ir buvusių Jugoslavijos šalių kalbomis. Kontaktas galimas ir per WhatsApp. Pjdexuiczepfx Acajpw

Būklė: naudotas, Gamybos metai: 2015, veikimo valandos: 2 500 h,

Būklė: beveik kaip naujas (naudotas), „STA Impianti RE-5“ kavos skrudinimo įrenginys, pagamintas Italijoje, talpa – 5 kg vienai partijai (iš viso galima pagaminti iki maždaug 20 kg/val.). Įrenginys puikios būklės ir veikia be priekaištų; naudotas labai nedaug. Specifikacijos: * Gamintojas: „STA Impianti“ (Italija) Ppedpfezla Aajx Acajw * Modelis: RE-5 * Talpa: 5 kg vienai partijai * Degalų tipas: suskystintos naftos dujos (SND) * Integruota aušinimo sistema * Į komplektą įeina cikloninis/lukštų surinktuvas * Pilnas valdymo skydelis Puikiai veikiantis įrenginys, paruoštas naudoti. Idealiai tinka: * Mažoms kavos skrudinimo įmonėms * Specializuotos kavos skrudinimui * Amatininkų skrudinimo projektams * Kavinių reikmėms

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Slitter Stainless Steel 1500x3, manufactured by SAMO OCEMI Completely refurbished in 2016. Technical Specifications Minimum thickness: 0.4 mm Maximum thickness: Up to 4 mm with Rm 400 N/mm² | Up to 3 mm with 700 N/mm² Coil width: max. 1,540 mm Maximum coil weight: 16 t Direction: left to right Speed: up to 150 m/min Scope of supply · Hydraulic coil car, floor-mounted · Hydraulic expansion decoiler with 28 kW DC motor, 717 rpm, 2,200 rpm, for dynamic braking and energy recovery. Fixed. · Disc brake. · Motorized damping roller. · Paper rewinder. · Alignment table. · Coil opener with telescopic table. · Feed unit with pinch roll and 3-roll straightener. · Centering unit (motorized) with 3 polyurethane flattening rollers. · PVC film applicator (new 2017) · Slitting head, shaft diameter: 200 mm. DC motor 72 kW 780–2,652 rpm + parking brake. · Turnstile knife loader – 2-arm pair. · DC motor for tensioning roller 23 kW 1,960 rpm + parking brake. · Movable scrap table with scrap conveyor. · Scrap winder, single drum dimension 600x600. AC motor 15 kW with inverter. · Loop table (bypass) · Braking carriage (movable) with: * Double separator roller * Deburring roller (new in 2017) * Felt press * Braking rollers – with 33 kW DC motor–2,550 rpm for strip tension control and energy recovery. * Cross-cut shear (cutting shear) * Deflector roll · Recoiler, hydraulic expansion, separator arm with automatic lifting system. DC motor 114 kW 800–2,400 rpm + parking brake. Pjdpfx Acsymcmfjaopw · Coil offloading car, floor-mounted, with pressing arm. · Turnstile arm 4 x 20 t, motorized · Electrical equipment (NEW in 2016). Supply voltage 3x380V Includes: Control cabinet dimensions mm 5,600 x 600. With Siemens S7-300 PLC. 3 operator panels. Main panel with Siemens Touch HMI screen. · Hydraulic equipment. Oil and air cooled hydraulic unit. Manifolds with solenoid valves on each machine, 24 V DC · Complete safety fencing, mechanical/optical. · Cutting tools (approx. 160 pieces of blades, spacers, separator discs..). Documentation · Foundation drawings · Electrical diagrams · Hydraulic diagrams · PLC and HMI software · CE Declaration of Conformity Min. thickness: 0.4 mm Max. thickness: Up to 4 mm with Rm 400 N/mm² | Up to 3 mm with 700 N/mm² Max. coil width: 1,540 mm Max. coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras svoris: 1 200 kg, įėjimo įtampa: 400 V, bendras plotis: 1 050 mm, bendras ilgis: 1 920 mm, bendras aukštis: 2 160 mm, filtravimo plotas: 23,75 m², siurbimo galia: 1 500 m³/val, Įranga: Tipinė plokštelė prieinama, „HERDING“ prekės ženklo dulkšalinimo ir suvirinimo dūmų šalinimo įrenginys. Automatiškai valantis, pneumatinis filtras, skirtas plazminiam, lazeriniam suvirinimui, šlifavimui, gipso, cemento, plastikų ir įvairių rūšių sausų dulkių valymui. Filtras valomas pneumatiškai, naudojant suspausto oro impulsus darbo metu, todėl užtikrinamas didelis įrenginio efektyvumas. Labai efektyvi „Jet-Pulse“ valymo sistema, pasižyminti mažu suspausto oro sunaudojimu. Modelis: „Delta Comp 1500-5/9 SB“ Ventiliatoriaus galia: 5,5 kW Efektyvumas: 1500 m³/val. Filtravimo plotas: 23,75 m² Įleidimo skersmuo: 150 mm Aukštis: 2,16 m Plotis: 1,05 m Gylis: 1,92 m Svoris: 1200 kg Sandėlio numeris: 1158 Pjdpfxezpxdko Acaepw

Būklė: labai geros būklės (naudotas), Parduodamas patvarus, pramoninis diskinis medžio smulkintuvas, pagamintas žinomo švedų gamintojo „BRUKS MEKANISKA AB“ (Arbrå). Ši mašina yra žinoma dėl patikimumo, ilgaamžiškumo ir didelio našumo apdorojant medienos atliekas, šakas ir rąstus. ⚙️ TECHNINĖS CHARAKTERISTIKOS IR SPECIFIKACIJOS: Gamintojas: „Bruks Mekaniska AB“, Arbrå (Švedija) Modelis: 1500 M Mašinos tipas: Diskinis smulkintuvas Serijos numeris (Tillv. Nr.): 226575 Pjovimo sistema: 3 peilių (įmontuoti nauji peiliai) Pagrindinis variklis: 45 kW Pašarimo varikliai: 2 x 3 kW Disko skersmuo: 1500 mm 🛠️ MAŠINOS PRIVALUMAI: Pasiruošusi darbui: Smulkintuve įmontuoti visiškai nauji peiliai, todėl mašina iškart po įsigijimo užtikrina aukščiausią pjovimo tikslumą ir maksimalų našumą be papildomų finansinių investicijų. Švediška kokybė: Tvirti, patvarūs konstruktyvūs elementai, pritaikyti nuolatiniam darbui sudėtingiausiomis sąlygomis. Didelis našumas: Puikiai tinka degimo medžio šakelių, technologinių šakelių gamybai arba medienos apdirbimo atliekų utilizavimui. Patikrintos technologijos: „Bruks“ (šiuo metu „Bruks Siwertell“) markės mašinos yra lyderės medienos ir biomasės apdirbimo pramonėje. 📍 PAPILDOMA INFORMACIJA: Psdpfszpz Ewjx Acaopw Būklė: Naudota, techniškai visiškai tvarkinga. Mašina paruošta apžiūrai ir darbui.

Būklė: naujas, Gamybos metai: 2026, The LUFT 1500 screw compressor with inverter features state-of-the-art solutions used in pneumatics, combined with the use of high-quality materials and components. Low operating costs, user-friendly operation, ergonomic and robust construction as well as high performance ensure efficient and trouble-free operation. The LUFT 1500 INVERTER stands out with its direct drive, which provides significantly better efficiency and lower power losses compared to belt-driven models. This innovative solution guarantees optimum use of the motor's power, translating into higher output at lower energy consumption. The maximum pressure generated by this screw compressor is 10 bar. Full control over the unit’s operating parameters is provided by an intuitive MAM series electronic control panel, which gives you access to vital compressor information, enhancing flexibility and process control. Pedpfx Ajxnxzaecaepw Technical specifications: Motor power: 11 kW Voltage: 400V/50Hz Output at 0-6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1170 x 730 x 1020 mm Weight: 243 kg Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, Set including LUFT 1500 screw compressor with inverter, vertical air receiver with compressed air fittings (capacity: 1000 l), and IZBERG N20S dryer. The CORMAK LUFT series screw compressor, made by the Polish brand, features state-of-the-art pneumatic solutions, complemented by high-quality materials and components. Low operating costs, ease of use, ergonomic and robust design, and high efficiency ensure effective and trouble-free operation. LUFT 1500 INVERTER – Technical Specifications: - Motor power: 11 kW - Voltage: 400V/50Hz - Capacity (0-6 bar): 1620 L/min Ppsdpfx Acjxnyhueasw - Capacity at 6 bar: 1580 L/min - Capacity at 8 bar: 1350 L/min - Capacity at 10 bar: 1230 L/min - Outlet connection diameter (G): 1" - Dimensions: 1170 x 730 x 1020 mm - Weight: 243 kg IZBERG N20S – Technical Specifications: - Inlet/outlet pipe diameter (BSP): 1" - Max working pressure: 10 bar - Max inlet air temperature: ≤ 38°C - Dew point temperature: 3°C - Air flow: 2800 l/min - Power: 0.58 kW - Supply voltage: 230 V - Dimensions (L x W x H): 420 x 700 x 690 mm - Weight: 37 kg - Refrigerant type and quantity: R134a, 550 g 1000L VERTICAL AIR RECEIVER – Technical Specifications: - Weight: 230 kg - Number of connections: 6 - Connection sizes: 2", 1/2" - Dimensions: 230 x 80.8 cm - Tank capacity: 1000 l - Working pressure: 11 bar - Wall thickness: 4 mm - Diameter: Ø 808 mm - Height: 2300 mm

Būklė: naujas, Gamybos metai: 2026, LUFT 1500 COMPACT Screw Compressor with Refrigeration Air Dryer. The CORMAK LUFT series screw compressor, made by the Polish brand Cormak, represents the latest technological advancements in pneumatics, combined with high-quality materials and components. Featuring low operating costs, ease of use, ergonomic and robust design, as well as high performance, it guarantees efficient and trouble-free operation. Key features of screw modules in CORMAK compressors: - Modern technology and efficiency: Screw modules ensure excellent performance and outstanding operational efficiency. Their design focuses on maximum output with minimal energy consumption. - Precision and control: Thanks to advanced technical solutions, screw modules offer precise control of the compressed air production process. This results in stable pressure and the optimal performance of the entire pneumatic system. - Durability and reliability: The screw modules used in CORMAK compressors are engineered for longevity. Their solid construction and use of high-quality materials ensure reliability even in demanding industrial environments, minimizing downtime and reducing the need for frequent repairs. Integrated Refrigeration Dryer – Top-Quality Air - Two-stage drying system: Provides effective moisture removal and protects the pneumatic installation. - Variable speed fan: Automatically adjusts cooling performance to operating conditions, allowing for energy savings. - Dual filtration system: Pre-filter with 3.0 µm accuracy for removing larger solid contaminants, and a fine filter with 0.1 µm accuracy that traps small oil particles (aerosols) and other impurities, ensuring the highest air purity. Technical specifications: Motor power: 11 kW Voltage: 400V/50Hz Podpfx Aoxnk Acscajpw Capacity at 0–6 bar: 1620 L/min Capacity at 6 bar: 1580 L/min Capacity at 8 bar: 1350 L/min Capacity at 10 bar: 1230 L/min Discharge port diameter (G): 1" Dimensions: 1550 x 740 x 1150 mm Weight: 500 kg Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, CORMAK LUFT 1500 VSD+PM Compact Screw Compressor with Dryer – a compact set for demanding applications – ENERGY SAVER SET INCLUDES: - LUFT 1500 VSD+PM COMPACT Screw Compressor with integrated dryer. - Horizontal 500 L Compressed Air Receiver. Key features that set these models apart: 1. Permanent Magnet Motor Technology (PM) Most compressors in the Energy Saver series use Permanent Magnet motors. Compared to standard induction motors: - They provide efficiency levels compliant with IE4 or even IE5 standards. - Maintain high performance even at very low speeds (standard motors lose efficiency outside their nominal range). - Are smaller, lighter, and generate less heat. 2. Advanced Variable Speed Drive Control (VSD) The heart of the Energy Saver line is the frequency inverter (VSD). - Demand-adaptive: The compressor does not work in a fixed "on/off" (load/unload) cycle. If your facility requires only 30% output, the compressor reduces RPM accordingly, consuming proportionally less energy. - Idle-running elimination: Conventional compressors often continue to run for several minutes after filling the tank, drawing about 25–30% of nominal power without producing compressed air. Energy Saver models almost completely eliminate this wasteful operation. 3. Soft Start Thanks to the VSD, these units start up smoothly from 0 Hz. This means no sudden current surges during start-up, which: - Protects your factory’s electrical installation. - Allows for more frequent start/stop cycles without risk of motor winding overheating. 4. Real Savings In practice, using the Energy Saver line enables reduction of electricity bills by 30% to 50% compared to traditional fixed-speed compressors. Additionally, the system maintains a very stable network pressure (accuracy up to 0.1 bar), which is crucial for precision devices such as laser cutters. Longer service life: the absence of sudden pressure and temperature fluctuations extends the lifespan of the screw stage. Technical specifications Pedpfxjychbao Acajpw Motor power: 11 kW / 15 HP Voltage: 400V/50Hz Output at 0-6 bar: 1620 L/min Output at 6 bar: 1580 L/min Output at 8 bar: 1350 L/min Output at 10 bar: 1230 L/min Outlet connection diameter (G): 1" Dimensions: 1600 x 740 x 1750 mm Weight: 500 kg

Būklė: naujas, Gamybos metai: 2026, Chilleris HL-1500 HL-1500 užtikrina stabilias darbo sąlygas lazerių pjaustymo staklėms iki 1,5 kW, palaikydamas pastovią aušinimo terpės temperatūrą su ±1°C tikslumu. Šiluminis stabilumas užtikrina nuolatinę pjovimo briaunų kokybę, mažesnę prastovų riziką ir ilgesnį šaltinio bei galvutės tarnavimo laiką. Kompaktiškas korpusas leidžia lengvai pastatyti įrenginį šalia mašinos, o srauto parametrai ir talpos dydis leidžia saugiai bei nenutrūkstamai dirbti gamybos režimu. Podpfx Acjzff Nroaspw Nauda naudotojui - Procesų pakartojamumas – stabili temperatūra = stabilus spindulys ir šaltinio efektyvumas. - Komponentų apsauga – mažesnės šiluminės apkrovos sumažina detalių dėvėjimąsi. - Greita integracija – 220 V/50 Hz maitinimas ir standartinės jungtys palengvina prijungimą. - Eksploatacijos ekonomija – vandens aušinimas sumažina prastovų ir aptarnavimo dėl perkaitimo riziką. Pritaikymas - Lazerio šaltinio ir optikos/galvutės aušinimas Fiber lazerių pjovimo staklėse iki 1,5 kW. - Tinka gamybos įmonėms, kurioms svarbus procesų tęstinumas ir mažas gedimų dažnis. Eksploatavimas - Rekomenduojama palaikyti sistemos švarą ir reguliariai tikrinti vandens lygį bei cirkuliaciją, kas užtikrina aukštą darbo kultūrą ir visos sistemos patikimumą. - Kompaktiški matmenys palengvina techninę priežiūrą ir kasdienį aptarnavimą. Techninė specifikacija HL-1500 Modelis: HL-1500 Talpyklos tūris: 13 l Srautas (cirkuliacija): 33 l/min Greito sujungimo skersmuo: 1/2" Kėlimo aukštis: 30 m Kompresoriaus galia: 2,7 kW Siurblio galia: 0,55 kW Šaltnešis: R-410A, 1800 g Aušinimo tikslumas: ±1 °C Maitinimas: 220 V ±10%, 50 Hz Matmenys (P×G×A): 620 × 430 × 720 mm Svoris: 39 kg

Būklė: naujas, Gamybos metai: 2025, Įrenginys turi 2 aušinimo sistemas: – Lazerio galvutės aušinimo sistema – Lazerio šaltinio aušinimo sistema Šaldytuvas skirtas lazeriams, kurių galia iki 1500 W. Skirtas lazerio šaltiniui aušinti lazeriniuose ploteriuose, naudojant aušinimo agregatą. Šaldytuvas palaiko tinkamą lazerio šaltinio darbinę temperatūrą, užtikrindamas nuolatinę pjovimo arba graviravimo kokybę viso naudojimo metu. Techniniai parametrai: Talpa 15 l Maksimalus vandens srautas 70 l/min Vandens stulpelio pakėlimo aukštis 45 m Aušinimo našumas 5,1 kW Šaltnešis R-410A Jungčių skersmuo 1/2" rp Maitinimas 220 V (+-10 %), 50 Hz Svoris 72 kg Matmenys 700 x 470 x 890 mm 1. Ventiliatorius 2. Šildymo sistemos valdymo skydelis 3. Aušinimo sistemos valdymo skydelis 4. Pagrindinis jungiklis 5. Slėgio indikatorius 6. Vandens prijungimas 7. Aušinimo sistemos prijungimas prie galvutės Ppjdpfx Asv Aipnjcajw 8. Aušinimo sistemos prijungimas prie lazerio šaltinio 9. Vandens lygio indikatorius sistemoje 10. Prijungimas prie signalizacijos sistemos 11. Maitinimo prijungimas 12. Vandens išleidimo vožtuvas

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2022, Laser Welding System – IPG Photonics GENESIS Mounted on marble base Cell Model: SYSLC0000058U Serial Number: PD206000 Power Supply: 380–415 VAC Phases: 3P + N + PE Frequency: 50/60 Hz Full Load Amperage (FLA): 25 A Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA Wiring Diagram: DOCCHSDMPSXX0225 Manufacture Date: September 2022 2. Laser Source: Model: YLR-1500-WC Serial Number: PLMP32200563 Power Supply: 200–240 VAC, single-phase, 50/60 Hz Rated Power: 4500 VA Manufacture Date: March 2022 3. Chiller – IPG Photonics Model: LC71.01-A.4.5/6 Serial Number: PC220200019 Manufacture Date: February 2022 Power Supply: 400/480 V, 3~ (three-phase), 50/60 Hz Psdpfjwyb S Iox Acaepw Overcurrent Protection: 30 A / Type 1 Short-circuit Current: 50 kA Rated Current at Full Load: 16/17 A Motor Current (max. motor load): M1 5.5 A Wiring Diagram: P35-001221 Cooling Capacity: 5.5 / 5.9 kW Refrigerant: R407-C, 2.2 kg Max. Operating Pressure: 30 bar.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2012, veikimo valandos: 4 046 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 000 mm, laisvas kėlimas: 1 860 mm, apkrovos centras: 600 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 2 600 mm, variklių gamintojas: G.M., pavaros tipas: hidrostatinis, šakių laikiklio plotis: 1 200 mm, šakių ilgis: 1 600 mm, šakės plotis: 150 mm, šakės storis: 50 mm, padang padangų: 100 procentas, Priekinės padangos tipas: pilnos gumos padangos (juodos), priekinės padangos dydis: 200/50-10, galinės padangos tipas: pilnos gumos padangos (juodos), galinės padangos dydis: 23X10-12, bendras svoris: 8 250 kg, tuščias svoris: 5 250 kg, bendras aukštis: 2 350 mm, bendras ilgis: 2 800 mm, bendras plotis: 1 950 mm, spalva: geltonas, Įranga: CE žymėjimas, apšvietimas, kabina, padėklų šakės, visų varančiųjų ratų pavara, šoninis poslinkis, COMBILIFT C3000 – 2012 – 4,046 MTH – LPG – Duplex 4 000 mm – Pozycjoner wideł – Platformy 1 500 mm | Kompleksowo serwisowany – Nowe opony – Opcjonalny trawers 4 050 mm – Stan 5/5 ✅ FT LOGISTICS – Używane i nowe wózki widłowe z gwarancją jakości 🚛✅ Gotowy do pracy. Bez kompromisów. ⚙️ Ten COMBILIFT C3000 zapewnia płynną i niezawodną obsługę, minimalizując przestoje. Po pełnym przeglądzie technicznym i odświeżeniu wizualnym prezentuje się jak nowy i jest gotowy do natychmiastowej pracy. 🔧✨ Podozphy Uopfx Acajpw Dane techniczne 📌 • Rok produkcji: 2012 | Przebieg: 4 046 MTH • Udźwig: 3 000 kg | Środek ciężkości: 600 mm • Maszt: Duplex 4 000 mm • Pozycjoner wideł: 1 200 mm | Widły: 1 600 mm • Platformy: 1 500 mm | Trawers: 4 050 mm (opcja) • Opony: superelastyczne 100% (Przód 200/50-10 | Tył 23x10-12) • Ogrzewana, zamknięta kabina ❄️🔥 • Masa własna: 5 250 kg | Wymiary: 2350W / 2800D / 1950S | Wysokość całkowita: 2 600 mm Idealny do 🏭 wąskich korytarzy, drewna/stali/rur, ładunków długich, do pracy wewnątrz i na zewnątrz. Dlaczego FT LOGISTICS? 🤝 Niezawodne maszyny w całej Europie. Jakość, której możesz zaufać. ⭐

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 520H 1500-800 e² / Hybrid Injection Moulding Machine / Production Line with Side-entry Arburg Multilift H Robot Year of Manufacture: 09.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping system: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high speed, energy-efficient, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened – bimetallic Main machine motor – servo motor driven by inverter – energy-saving The injection unit is driven by a servo motor controlled by an inverter Machine with cylinder/nitrogen accumulator (additional charge for high-speed operation) Central lubrication Automatic mould height adjustment Kistler sensor – mould pressure monitoring The injection moulding machine was operated in a so-called "cleaning room", equipped with additional protection against contamination as well as two vapour absorbers Side-entry Arburg Multilift H robot Year of manufacture: 2012 5-axis robot: Z-axis servo-driven (electric); X, Y, and B axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electrically adjustable height, protective enclosure Robot and conveyor belt available at extra cost Dimensions: Weight: 6840 kg Length/Width/Height: 5.03x1.56x2.21 m Ppodpfxezc N R Aj Acasw All listed machines are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Shot weight: 427 g Injection pressure: 1440 bar Dosage volume: 508 cc Clamping unit: Clamping force: 150 t Tie-bar spacing: 470x470 mm Platen size: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened – bimetallic Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pump/Motor: 30 kW Heating capacity: 14.9 kW Total connected load: 44.9 kW All offered machines are started up by our service technicians before sale. Ppedpezc N Nfsfx Acasw It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Metering volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping system: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy efficient and very quiet Euromap 67 Robot interface Core pull control Control with 8 hot runner zones Injection unit hardened - bimetallic Main drive of the machine – servo motor powered by inverter – energy saving The injection unit is driven by a servo motor controlled by an inverter Machine equipped with cylinder / battery filled with compressed nitrogen (additional charge for high-speed operation) Central lubrication Parallel movements Priamus sensor – mold pressure control Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m Podpfx Aszc N R Nocaspw All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to attend live technical demonstrations at our facility in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of Manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Pedpozc N Sysfx Acaopw Control system: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Control system with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine - servo motor driven with inverter - energy saving The injection unit is powered by a servo motor controlled by an inverter Machine equipped with a compressed nitrogen cylinder/battery (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleaning room" and has additional safety features against contamination and two fume absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis servo-driven (electric); X-, Y-, and B-axes (rotation) pneumatic Robot safety package Robot with adapter, conveyor belt with electric height adjustment, protective housing Purchase of the robot and conveyor belt at additional cost Dimensions: Weight: 6820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 470C 1500-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cm³ Clamping unit: Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface 1x air valve Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Wittmann W711 Robot Year of manufacture: 2007 4-axis robot: 3 axes with servo motors (electric); C axis Travel range of axes: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter Podpezc N I Uefx Acaopw Purchase of the robot at an additional charge Dimensions: Weight: 4,900 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating: 9.7 kW Total power: 28.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be changed Dimensions: Psdpozc N Nlofx Acajpw Weight: 4,790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request