Schaublin Staklės - Įprastinės pirkti naudotą (47 832)

Būklė: naudotas, TECHNICAL DATA - Strokes: 320 x 150 x 375 [mm] Gedsuhbw Njpfx Al Njud - Distance from vertical spindle to table surface: 310 [mm] - Distance from horizontal spindle to table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58–2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12–400 [mm/min] - Rapid traverse: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine dimensions (L x W x H): 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] ACCESSORIES - Swivelling vice - Coolant system

Būklė: labai geros būklės (naudotas), For sale is a Schaublin 125 precision lathe in exceptionally good condition, complete with extensive accessories. The machine was never used in production, showing minimal visible wear. Radial and axial runout at the spindle nose is less than 0.001mm. In terms of condition, this is an almost like-new machine. The lathe is, of course, fully functional and has been checked. Both the brake and the feed circuit board were recently replaced. This is a rare opportunity to acquire one of the most precise conventional lathes in outstanding condition. TECHNICAL DATA: - Centre height: 125 mm - Distance between centres: 500 mm - Maximum workpiece diameter over bed: 270 mm - Maximum workpiece diameter over cross slide: 120 mm - Infinitely variable spindle speeds: 225–3000 rpm - Spindle nose: Camlock D1-3 - Spindle bore: 32 mm - Collets: Schaublin B32 - Collet capacity: 24 mm - Through hole in chuck: 28 mm - Longitudinal bed travel: 440 mm - Cross slide travel: 130 mm - Tool slide travel: 90 mm - Tailstock quill taper: Morse 2 Guedpoy Hnucefx Al Njd - Tailstock quill travel: 100 mm - Automatic feeds, longitudinal and cross: 4 – 260 mm/min, stepless Weight approx. 950 kg Accessories: - Röhm 3-jaw chuck 160 mm - Reishauer 4-jaw independent chuck 160 mm - 4-jaw self-centering chuck 160 mm - 6x Multifix tool holders - Change gears for thread cutting - B32 collet set 1 to 24 mm with drawbar - Machine leveling feet - Complete documentation including original brochure

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Schaublin 102N-VM-CF hochpräzisions-Drehmaschine aus Schweizer Fertigung Baujahr: 2005 Max. zulässiger Umlaufdurchmesser über Bett: 200 mm Max. zulässiger Umlaufdurchmesser über Support: 120 mm Spitzenhöhe: 102 mm Spitzenweite: 450 mm Bettlänge: 1000 mm Betthöhe: 168 mm Motorleistung: 4,2 kW Spindeldrehzahl: 100 - 3000 U/min Spindelaufnahme: W25 Querweg X-Achse: 100 mm Auflösung X-Achse (Radius): 0,01 mm Längsweg Z-Achse: 90 mm Auflösung Z-Achse (Radius): 0,01 mm Leitspindel: - 8 Längsvorschübe - Größere Vorschübe möglich bei Nutzung der Gewindesteuerung zum Drehen Maximaler Werkzeugquerschnitt (Multifix-System): 10x10 mm Stangenspanner (Multifix-System), Durchmesser: 20 mm Höhen- und seiteneinstellbarer Reitstock: Innenkonus Hülse: MK2 Guodpfow N Rh Aox Al Nod Reitstockdorn-Ø: 30 mm Reitstockweg: 80 mm Kühlmitteltank: 23 Liter Elektr. Anschlusswert: 400 V Abmessungen (L x B x H): 1500 x 510 x 1550 mm Zubehör / Optionen: - ACU-RITE Digitalanzeige, 3-Achsen (X-Z-Z1): X-Auflösung 0,001 mm Z-Auflösung 0,005 mm Z1-Auflösung 0,005 mm - Kühlmittelanlage - Rückseitige Blechverkleidung - Doppeltes Start/Stopp-Pedal mit Spindelumkehr - Schaublin W25 Spannzangensatz - Gussfutter W25 Ø110 mm mit Backen - Multifix-A Schnellwechselrevolver mit Haltern - Antriebssystem für Zusatzaggregate mit Riemen, verstell- und schwenkbare Riemenspannvorrichtung, kompletter Antrieb mit Motor, Riemen Ø6x2.500 mm - Reitstock - usw. Unter Strom in unserem Lager verfügbar.

Būklė: naudotas, Rankinė svirties tekinimo staklės SCHAUBLIN, modelis 102 Mechaniko tekinimo staklės Staklių Nr. 208322 Gamybos metai apie 1970 Viso ilgio lova 650 mm Aukštis virš lovos 102 mm Aukštis virš skersinio stalo 53 mm Vidutinė pagrindinio veleno apsisukimų dažnis apie 2.800 aps./min (3 greičių pakopos) Variklis 0,37 kW, 2800 aps./min Maitinimo įtampa 380 V, 50 Hz - Rankinė svirties įpjovimo ir atpjovimo stovas su tiksliai reguliuojamais ribotuvais - Įrankio laikiklis su precizišku aukščio nustatymu - Spaustuvo įranga (yra tik viena spaustuvinė įvorė) - Sukimosi greičio keitimas perjungiant pavaros diržą Reikalinga vieta su stalu pagrindu I x P x A 1150 x 600 x 1200 mm Svoris su stalu pagrindu 130 kg Guodpfsw Iq Umsx Al Ned Gera būklė

Būklė: labai geros būklės (naudotas), Skaitmeninis ekranas Priedai prieinami Stalas Naudojamas stalo plotas 700 x 250 mm Eigos X eiga 320 mm Y eiga 150 mm Guodpjyywnfefx Al Nsd Z eiga 370 mm Automatiniai stalo judesiai 8 išilginiai padavimai 11–210 mm/min 8 vertikalūs padavimai 11–210 mm/min Greitasis stalo judėjimas Išilginis ir vertikalus 1000 mm/min Tvirtinimas ISO 30

Gamybos metai: 1998, veikimo valandos: 1 339 h, būklė: paruoštas naudoti (naudotas), Valdymo blokas Prekės ženklas: FANUC Gsdex D Itwopfx Al Nsud Modelis: Series 18i-T Pagrindinis pavara Ašių skaičius: 4 Veleno greitis: 4000 aps./min. Įrankio tvirtinimas: VDI 30 Ši 4 ašių SCHAUBLIN 65 TM-3 pagaminta 1998 metais. Tai tvirta horizontalioji tekinimo staklė, kurios didžiausias tekinimo skersmuo – 380 mm, ilgis – 534 mm. Veleno ir sukamo įrankio greitis siekia iki 4 000 aps./min, 12 pozicijų bokštelis su varomais įrankiais, tad turite puikią galimybę įsigyti SCHAUBLIN 65 TM-3 horizontalų tekinimo staklę. Daugiau informacijos – susisiekite su mumis. Pritaikymo sritys Tekinimas

Būklė: labai geros būklės (naudotas), Universalioji frezavimo staklė Schaublin 53N Guodsyxgyhspfx Al Ned Gamintojas: Schaublin Tipas: 53 N Stalo paviršius: 1100 x 255 mm T formos grioveliai: 4 T griovelio plotis: 14 mm T griovelių atstumas: 50 mm Išilginis eigos kelias: 700 mm Išilginis eigos kelias spiraliniam frezavimui: 550 mm Vertikalus eigos kelias: 430 mm Skersinis eigos kelias: 250 mm Išilginės/skersinės padavimo greitis: 12–1000 mm/min Vertikalus padavimo greitis: 6–500 mm/min Greitasis perėjimas išilgai/įstrižai: 3500 mm/min Greitasis perėjimas vertikaliai: 1750 mm/min Veleno sūkiai: 18 žingsnių nuo 38 iki 1500 aps./min Veleno tvirtinimas: VSM 33831 Dydis 44 Suskabinimo griebtuvai: P25 Pagrindinis pavara galia: 4 AG Pagrindinė pavara apsukos: 1425 aps./min Staklės svoris: 1650 kg Užimamas plotas: 226 x 172 x 165 cm Už pateiktos informacijos tikslumą, išsamumą ir aktualumą neatsakome.

Būklė: visiškai atnaujintas (naudotas), Parduodama Šveicarijos Schaublin 13 precizinė frezavimo staklė, visiškai atnaujintos būklės – geresnė nei nauja. Staklė Šveicarijoje buvo pilnai kapitališkai suremontuota: atnaujinta geometrija ir modernizuota elektros įranga. Visi vedančiosios dalys buvo preciziškai nubraižytos ir yra idealiame stovyje. Visi susidėvėję komponentai bei velenai pakeisti, naujas diržas ir kt. Po remonto staklė nenaudota. Tokios būklės įranga – absoliuti retenybė ir vertinga investicija. Idealu ypatingai tikslioms užduotims arba kolekcionieriams, vertinantiems tobulas stakles. Guedpsyw A Hzjfx Al Nod

Būklė: labai geros būklės (naudotas), SCHAUBLIN 51 5AX CNC yra penkių ašių apdirbimo centras, sukurtas precizikai, aukštam tikslumui ir patikimumui. Pajėgumai: X300 Y400 Z430 mm; stalas Ø210 mm; apkrovos V50 H75 kg; A +30/–120°, C360°. Specifikacijos: HSK‑A63, 0–20 000 min⁻¹, verpstės variklis 23 kW, padavimo greitis 12 000 mm/min, eigos greitis 30 m/min; svoris ≈5750 kg; matmenys 2700×1800×2600 mm. Magazinė – 20 vietų, Ø 80 mm (laisvai 95 mm), L 250 mm, keitimas 3 s. Priedai: aušinimas, vandens radiatoriaus aušintuvas, FX4000 alyvos dūmų ištraukimas, purškimo pistoletas. Pasiekia glaudžias tolerancijas; pritaikymas: laikrodžiai, aviacija, medicina, automobilių pramonė, mašinų gamyba. Gjdpsyxn Hvsfx Al Neud

Būklė: labai geros būklės (naudotas), Centre height 125 mm Gjdpfjlyrciox Al Neud Centre distance 500 mm Spindle speeds 40–3000 rpm Various accessories MARCELS MASCHINEN CH

Būklė: beveik kaip naujas (parodų įrenginys), Schaublin steady rest, follower rest, 102VM model Gusdpfx Aokw Drzol Ned

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Schaublin 135 High-Precision Lathe with NEW K&C 3-axis Digital Readout and Accessory Cabinet from University – Excellent Condition! Technical Data: >> Centre Height: 135 mm Guedpfx Aox H Szyjl Njd >> Centre Distance: 630 mm >> Swing over Bed: 315 mm >> Spindle Nose: Camlock D1-4 >> Spindle Bore: 40 mm >> Longitudinal and Cross Feeds: 0.025 – 0.35 mm/rev >> Metric Threads: 0.25 – 14 mm >> Tailstock Taper: MK3 >> Infinitely variable spindle speeds: 55 – 3000 rpm >> Total connected load: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> NEW K&C 3-axis digital readout, 12 months manufacturer’s warranty, including operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, count direction switching Accessory cabinet contains: >> 160 mm 3-jaw chuck, 2 sets of jaws >> Multifix B, 3 pockets >> Internal and external collet rapid clamping systems >> Change gears >> 4-jaw chuck >> Faceplate >> Fixed and travelling steady rests >> Coolant system >> Centre points >> Operating manual >> and much more About the machine: Offered is a Schaublin 135 High-Precision Lathe. The machine is in very good condition, coming from a university with low operating hours. Equipped with a NEW K&C 3-axis digital readout and extensive accessories. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead Screw Lathe Schaublin 102N-VM Technical Data: >> Machine No.: 283152 >> Centre Height: 102 mm >> Distance Between Centres: 450 mm >> Spindle Bore: 25 mm >> Longitudinal Feeds: 8 settings from 0.02–0.3 mm/rev >> Metric Threads: 20 pitches from 0.25 to 4 mm >> Imperial Threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse Taper 2 (MT2) >> Infinitely Variable Speed Range: 270–3000 rpm >> Weight: approx. 700 kg Accessories: Godpfx Alowvq Tmj Nsud >> 3-jaw chuck with 2 sets of jaws >> Tool holder with 6 tool pockets >> Quick collet closer, draw tube, and 34 collets >> Coolant system >> Cutting tools, drill chuck (see photos) >> Operating manual with spare parts list About the Machine: For sale is a Schaublin 102VM lead screw lathe in very good condition. The machine is, of course, fully functional. All slides run smoothly and evenly. Even at high speeds, the 102VM runs quietly. The gear set for thread cutting is included, although it may not be complete. Take advantage of the opportunity to inspect this machine under power on site and see its excellent condition for yourself.

Būklė: naujas, Schinfa MachineREVISIE has been the specialist for overhauls for more than 27 years. All work is performed in-house. We can grind up to 2700 mm. We restore machines extensively to comply with DIN standards. We can overhaul your machine or supply a reconditioned machine from our inventory. Guedpfofhnr Isx Al Njd

Būklė: labai geros būklės (naudotas), Labai gera būklė Gjdpfx Asy Al Uxel Neud Skaitmeninis, Multifix, W32 spaustuvinės įvorės

Būklė: naudotas, mašinos/transporto priemonės numeris: 1023,

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 310435, Completely overhauled – new paintwork, New workbench Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3Ph Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Centre distance, headstock type W, normal: 470 mm - Centre distance, headstock type W with reduction gear: 375 mm - Swing over bed: 200 mm - Swing over cross slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Cast iron bed with ground trapezoidal profile Headstocks: - Spindle nose for collets: W-25 - Collet bore: 19.0 mm - Gear reduction ratio: 1:5 Cross slide: - Longitudinal travel of slide: 90 mm - Cross travel of slide: 100 mm - Tool shank cross-section for turning tools: 12x12 mm Tailstocks: - Internal taper of quill: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Errors or omissions excepted; the technical data is provided without obligation. Inventory number 2250023, Machine consists of: 1 NEW workbench 2000 x 800 mm with blue Urphen tabletop 2000 x 800 x 50 mm 1 stand, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 control panel bench above the planer table 1 W-25 workpiece holder (without gearbox) with clamping key, overhauled Gjdpsdr R Tcofx Al Neud 1 overhauled cross slide 1 overhauled, aligned tailstock 1 motor 380 V/50 Hz/3 phase, 2 speeds 1 used dead centre W-25 1 set of used collets W25 1 2x3 jaw chuck Reishauer ZMG Ø 110 mm on W-25 flange, used 1 new set of used Multifix tool holders, comprising: - 1 turret type A with AG20 bolt - 2 tool holders AD1675 - 2 tool holders AD2090 1 Albrecht self-tightening drill chuck, capacity 1-13 mm on CM2 arbor, used 1 used dead centre CM2 OPTIONAL 1 used clamping device with new belt CHF 1,000.-- + VAT 1 GRINDING MACHINE TYPE B-8 with spindle adjustable by 360°, max. speed 28,000 rpm, height-adjustable, fine adjustment, Ref. 800053 CHF 1,325.-- + VAT.

Būklė: geras (naudotas), Travel paths 300 x 150 x 355 mm Table size 700 x 250 mm Spindle mount ISO 30 Spindle speeds 58-2000 rpm Gusdsu Eqixepfx Al Nod With digital readout Various accessories MARCELS MASCHINEN CH

Būklė: geras (naudotas), Su skaitmeniniu ekranu Su gręžimo ir frezavimo galva Judėjimo eigą 330 x 400 x 475 mm Stalo prispaudimo plotas 650 x 245 mm Veleno laikiklis ISO 40 Veleno apsukos 63–2 800 aps./min. Godpfx Alew Nnuts Neud Įvairūs priedai MARCELS MASCHINEN CH

Būklė: labai geros būklės (naudotas), Centre height: 125 mm Centre distance: 500 mm Speed range: 45 – 3000 rpm Feed rate: 4 – 260 mm/min Spindle nose: Camlock D1-3" Tailstock taper: MK 2 Swing over bed: 250 mm Swing over cross slide: 120 mm Top slide travel: 100 mm Cross slide travel: 180 mm Gusdetzxh Topfx Al Nod Dimensions (W x D x H): 1500 x 850 x 1300 mm Weight approx.: 950 kg

Būklė: geras (naudotas), Centre height: 102 mm Centre distance: 450 mm Lead / feed screw W20 collets available Speed: approx. 210 – 3000 rpm Reduction gearbox Left and right rotation 2-speed drive Dimensions (L x W x H): approx. 1760 x 595 x 1230 mm Weight: approx. 650 kg Guedpfx Ajcug H Ssl Nod Various "Schaublin 102" models available in stock!

Būklė: geras (naudotas), Centre height: 102 mm Distance between centres: 450 mm Spindle bore: 32 mm Gujdpocpznhsfx Al Ned Reduction gearbox Left/right rotation 2-speed drive Variable speed: 270–3000 rpm Knee lever operation Swing over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories available Manual available Various 'Schaublin 102' models in stock!

Būklė: geras (naudotas), Right- & left-hand rotation with knee reversing switch 2-speed variable drive Headstock with reduction gearbox Cross slide with 90 mm travel Tripan tool holder 1 set of W20 collets 2 drawers Lamp 380 VAC Centre distance: 350 mm Centre height: 102 mm Swing diameter over bed: 200 mm Swing diameter over cross slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MT 2 Gedped Htvdefx Al Nsud Weight: approx. 500 kg Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various versions of "Schaublin 102" available from stock!

Būklė: geras (naudotas), Travel path X / Y / Z: 475 / 330 / 280 mm Table size (W x D): 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Gusdpfxod Dgdys Al Nsd Spindle taper: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine dimensions (W x D x H): approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel: Table: 330 mm* 1 handwheel revolution: 5 mm Vertical travel: Knee: 475 mm* 1 handwheel revolution: 2 mm Cross travel: Milling spindle carrier head: 400 mm 1 handwheel revolution: 5 mm * Both of these travel directions are equipped with automatic feed and can be controlled via programs. Shortest cycle time: 15 seconds, or 4 program cycles per minute. Scale drum readout accuracy: 0.02 mm Main motor: Milling head with 2 speeds Motor: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid traverse motor: 0.55 kW, 1000 rpm Rapid traverse longitudinal: 2500 mm/min Rapid traverse vertical: 1000 mm/min Feed motor: max. 0.2 kW Feed adjustment range - longitudinal: 4 - 500 mm/min Feed adjustment range - vertical: 1.6 - 200 mm/min Coolant system: Motor: 0.15 kW, 3000 rpm Coolant pump delivery rate: 20 l/min Coolant tank capacity: 30 l

Būklė: geras (naudotas), Center height: 130 mm Center distance: 450 mm Speed: approx. 55–3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets available Various holders available BERGER LAHR axis motors Combitec EIP E-500 control unit Manual for control included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Various versions of "Schaublin 102" in stock! Gedpfxscuhvuj Al Njud