Ciklo tekinimo staklės

SCHAUBLIN 125 CCN-R

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, veikimo valandos: 2 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 350523, Įranga: CE žymėjimas, Voltage: 380V Net weight: 1,400 kg Customs tariff number: 8458.1120 Dimensions: 180 x 128 x 172 cm TECHNICAL SPECIFICATIONS CAPACITIES Maximum turning diameter: 270 mm Maximum diameter over cross slide: 115 mm Center height over cross slide: 60 mm Turning length B32: 265 mm Center height above floor: 1,162 mm HEADSTOCK A2-4 / Camlock D1-3’’ Spindle for collets Schaublin Hainbuch / F38 / B32 Spindle speed: 50 – 5,000 rpm Iodpfjx Upugox Af Ieht AC motor drive – continuous/intermittent power: 5.5 / 7.5 kW AC motor drive – continuous/intermittent torque: 42 / 58 Nm Spindle bore (without clamping key): 39 mm Maximum bar capacity with collet: 32 mm Maximum bar capacity with automatic chuck: 32 mm PNEUMATIC CLAMPING Adjustable axial clamping force, force at 5 bar: 1,150 daN CROSS SLIDE Transverse travel, X-axis: 190 mm Resolution, X-axis (radial): 0.0005 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm AC motor drive – continuous/intermittent torque: 4 / 14 Nm Ball screw, Ø x pitch: Ø 32 x 5 mm FEEDS Working feed, X and Z axes, stepless: 0 – 5 m/min Rapid traverse, X and Z axes: 8 m/min REVOLVER TOOL SYSTEM Standard tool holder interface: VDI 20 Number of fixed/rotating tool stations: 8 / - Max. tool size: 16 x 16 mm Integrated coolant supply and bi-directional indexing: Yes COOLANT Tank capacity: 55 L Pump capacity: 10 L/min Pump pressure: 1.7 bar PNEUMATIC TAILSTOCK Quill taper: MT3 Quill outer diameter: 45 mm Quill stroke: 70 mm Adjustable thrust force: 25 – 260 daN All technical data is provided without obligation and subject to errors or omissions. Fully overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Headstock: Disassembled, cleaned, worn and defective parts replaced, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced and adjusted. New paint. Turret: Disassembled, cleaned, worn and defective parts replaced, newly painted, and mating surfaces skimmed. Tailstock: Disassembled, inspected, and overhauled. Newly painted. Hydraulics and pneumatics: Disassembled, motor checked, hoses and worn/defective parts replaced. X-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Z-axis: Disassembled, worn parts such as O-rings, seals, gaskets replaced. New ball screw and carriage installed. Electrical cabinet: Completely checked, various relays replaced. Paint: Colors: White RAL 9003 and Grey RAL 7011 Geometry in accordance with manufacturer's protocol. Various accessories checked and cleaned. Year: 2002

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Control: Fanuc 21T Turning diameter: 158 mm Swing diameter over bed: 340 mm Spindle speed: 6,000 rpm 8-position turret Tailstock Ijdswmzhpepfx Af Isht 3-jaw chuck, 2-jaw chuck, collet chuck Collets Wide range of tool holders

Sąlyga: geras (naudotas), Gamybos metai: 1997, sukimosi skersmuo virš skersinio stumduko: 60 mm, veleno skylė: 24 mm, ašies variklio galia: 7 500 W, sukimosi greitis (min.): 30 aps./min, sukimosi greitis (maks.): 5 000 aps./min, bendras aukštis: 1 660 mm, bendras ilgis: 1 700 mm, bendras plotis: 1 240 mm, bendras svoris: 1 420 kg, CNC tekinimo staklės su spaustuvo patronu F38 Ijdsvu Tvpspfx Af Isht Didžiausias tekinimo skersmuo Ø 200 mm, eigų ilgiai X/Z 180/255 mm, įrankių bokštelis SAUTER 8 pozicijų VDI20 (16x16 mm), velenas 7,5 kW, veleno galas A2-4, sūkių diapazonas 30-5000 aps./min., strypo pravedimas Ø 32 mm, tuščiaviduris veleno atmušas, valdymas FANUC Series T-20, vadovai

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 150 mm, bendras svoris: 12 000 kg, gręžimo skersmuo: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical specifications: Travels: X-axis longitudinal (table): 1800 mm Z-axis transverse (column): 1700 mm W-axis transverse (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Approximate machine weight: 12,000 kg Ihodpfjwcldaox Af Iet Technical data, accessories, and machine description are not binding. For further technical data, refer to the photos.

Sąlyga: naudotas, Gamybos metai: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum spindle speed: 8000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Ijdpjtzyx Tofx Af Ijht Z1 axis travel: 320 mm X1 axis travel: 50 mm Y1 axis travel: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool Mounting Slide 1: Number of tools Fixed with 16 x 16 mm tool shank: 5 pieces Slide 2: X2 axis travel: 165 mm Z2 axis travel: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool Mounting Slide 2: Number of stations with revolver and integrated spindle: 8 stations Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for Slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub spindle - 2 double drill holders for rear machining support with cylinder - Sub spindle part ejector

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 450 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 240 mm, bendras svoris: 6 000 kg, veleno greitis (maks.): 42 000 aps./min, 5-axis HSC milling machine Röders RXP500DSC with linear direct drives in all axes and torque drives in the rotary axes. The machine is completely overhauled, checked, and measured in-house. It meets new machine tolerances again! Travel ranges: X 450 mm, Y 400 mm, Z 240 mm Distance spindle/table: approx. 315 mm - Linear direct drives in all axes – maintenance-free - 19-position tool changer - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully-automatic measurement of milling tools (length/diameter/contour/cone angle) as well as wear monitoring, including tool cleaning before measurement - Hand-held control unit - Remote maintenance - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - Emulsion cooling - HSK40E spindle with max. 42,000 rpm - Spindle length compensation - EROWA zero-point clamping system integrated into the machine table - Manual chuck actuation - Automation package for retrofitting the machine with a pallet changer - Hand-held control unit Iedpfx Ajtt Argsf Ijht An inspection of the machine in ready-to-operate condition is possible at any time. You are also welcome to find out more about the scope and quality of our overhauled machines on our website or on our Hüttmann YouTube channel.

Sąlyga: geras (naudotas), Gamybos metai: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control unit: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel range X-axis: 300 mm Travel range Y-axis: 300 + 100 mm Travel range Z-axis: 330 mm Rapid traverse in X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Connected load: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): Ihodpfx Ajxflxasf Ist - CNC machining center Fanuc Robodrill α-T21iFa - Coolant pump and chip tray The precise scope of supply is as per the photo documentation. The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel ranges of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, this machine offers versatile machining capabilities. The tool changer with 21 positions ensures flexible production processes and minimizes setup times. The spindle reaches speeds up to 10,000 rpm, enabling both fine finishing operations and high-performance machining to be carried out efficiently. The Fanuc Series 31i-Model A5 control unit facilitates comfortable and reliable programming. Thanks to a maximum workpiece load of 200 kg and its compact footprint, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness or currentness of the information provided.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, STAR SH-12 CNC Sliding Head Lathe TECHNICAL DATA Turning diameter: 13 mm Spindle stroke: 140 mm Spindle speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Number of tools in turret: 3 Machine dimensions: 1500 x 950 x 1650 mm Weight: approx. 950 kg SCOPE OF DELIVERY Including (not a complete list): - STAR SH-12 CNC lathe - Bar feeder - Coolant pump - Transformer Ihsdpsvllmhofx Af Iot Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the information provided.

Gamybos metai: 1960, Sąlyga: naudotas, Surface grinding machine with magnetic chuck 250 x 135 400 Volt, power 1.8 kW Ihodpfx Aeiuz Tgof Ijt

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) in multimode, 16 W in single mode Ijdjd Dhw Nspfx Af Ijht Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm