Kraussmaffei 1600-17200Mc pirkti naudotą (3 099)

Būklė: geras (naudotas), Gamybos metai: 2002, spaudimo jėga: 1 100 kN, Gamintojas: KraussMaffei Kunststofftechnik München Modelis: KM 110-390 C2 Mašinos Nr.: 1141268 Užsakymo numeris: 646749/1 Pagaminimo metai: 2002 Isdpfxjytipaj Abvsib Uždarymo jėga: 1100 kN Uždarymo jėga: 110 t Tarptautinis dydžio žymėjimas: 390 C2 / 110 Liejimo agregato dydis: 390 Darbinė įtampa: 400 V Fazės: 3 Dažnis: 50 Hz Bendroji srovė: 164 A Pagrindinis saugiklis: 200 A Variklio srovė: 37 A Mašinos svoris: 5800 kg Vieta: Freiburgas

Būklė: geras (naudotas), Gamybos metai: 1999, spaudimo jėga: 650 kN, Gamintojas: KraussMaffei Kunststofftechnik München Modelis: KM 65-160 C2 Uždarymo jėga: 650 kN Mašinos Nr.: 641070 Iisdpfx Aeytik Rsbvob Užsakymo numeris: 643883/1 Pagaminimo metai: 1999 Tarptautinis dydžio žymėjimas: 160 C2 / 65 Darbinė įtampa: 400 V Fazės: 3 Dažnis: 50 Hz Bendroji srovė: 153 A Pirminis saugiklis: 160 A Maks. variklio srovė: 30 A Mašinos svoris: 3200 kg Vieta: Freiburg

Būklė: geras (naudotas), Vamzdinis kaitinimo įrenginys, kaitinimo juosta, kaitinimo apykaklė, žėručio kaitinimo elementas, cilindro šildytuvas, kaitinimo cilindras, keraminė kaitinimo juosta - Gamintojas: Krauss Maffei, kaitinimo juosta, kaitinimo apykaklė - Tipas: Ø200 x 160 mm .: 401 7184 Iodpolvykxofx Abveib - Kaitinimo galia: 5500 W - Įtampa: 230/400 V - Kiekis: 1 vnt. kaitinimo juosta - Kaina: už vienetą - Matmenys: 310/255/A160 mm - Svoris: 4,0 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 30 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8000 kN Ijdpfx Aoymn Rvjbvjib Maximum tool opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate (H x V): 1600 x 1550 mm Clear space (H x V): 1120 x 1000 mm Mould opening stroke: 1600 mm Mould installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Injection Unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticising rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic Equipment: Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1500 ltr. Dimensions and Weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44500 kg Max. mould weight: 12200 kg Accessories: - Vibration-damping elements Additional equipment: - 1 x air valve - Tie bar retraction device - 3 x hydraulic core pullers at moving platen - 2 x hydraulic core pullers at fixed platen - 20 x hot runner control zones - Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 50 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8000 kN Maximum tool opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate (H x V): 1600 x 1550 mm Clear space (H x V): 1120 x 1000 mm Mould opening stroke: 1600 mm Mould installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Injection Unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticising rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic Equipment: Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1500 ltr. Dimensions and Weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44500 kg Max. mould weight: 12200 kg Accessories: - Vibration-damping elements Additional equipment: - 1 x air valve - Tie bar retraction device - 3 x hydraulic core pullers at moving platen - 2 x hydraulic core pullers at fixed platen - 20 x hot runner control zones Isdpfxsymn Nfe Abvsib - Robot interface according to Euromap 67

Būklė: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 47 963 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 kN, For sale is an injection molding machine from KraussMaffei, model KM 200-220/220 CZ Multinject. Iijdpsrvimbefx Abveb The machine is in fully functional and well-maintained condition. Technical data: Year of manufacture: 2007 Clamping force: 200 t Injection units: 2 Automatic operating hours: 47,963 Dimensions: 5200 × 2200 × 2700 mm Weight: 11,500 kg Further technical details will follow shortly. The offer applies only to the machine itself; any peripheral equipment visible in the photos is not included in the offer. Upon request and for an additional fee, loading and transportation (across Europe) can be organized. Prices are subject to VAT. Viewing is possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your own? For more information or contact options, please visit our website.

Gamybos metai: 2004, būklė: geras (naudotas),

Gamybos metai: 2008, būklė: geras (naudotas), For sale is an injection moulding machine from Krauss Maffei, model KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic needle shut-off 2x hydraulic core pullers 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1,100 kN Mould opening force: 70 kN Euromap 63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-bit key Declaration of conformity, complete control cabinet Certificate USB memory stick Mechanical ejector coupling, supplied in the control cabinet All prices plus VAT Iiodsibyatopfx Abveb Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or do you want to sell your machine? For more information or to contact us, please visit our website.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, varžto skersmuo: 40 mm,

Gamybos metai: 2004, būklė: paruoštas naudoti (naudotas), For sale is an injection moulding machine from Krauss-Maffei, model 125-520 C2. The machine comes from a facility that places high value on cleanliness and regular maintenance. Year of manufacture: 2004 Pneumatic needle shut-off 2x hydraulic core pulls 83,000 operating hours Clamping force: 1,500 kN MC 4 control with colour monitor and integrated control panel 4 additional cylinders included: 1 x D35 / 2 x D40 / 1 x D45 Prices are subject to VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website. Iedpfslkbhwjx Abvsib

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 28 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 300 kN, For sale is a KraussMaffei hybrid injection moulding machine, 2-component model, type KM 130-750 CX. The machine is in very good condition, immediately operational, and has low operating hours. It features electronic injection and dosing units, as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally included) Core pull: 1x hydraulic Needle shut-off: pneumatic Tie-bar extension: 160 mm Cavity pressure transducer Selector valve Isdsu Hxm Uspfx Abveib Transport and loading can be organised across Europe for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, visit our website.

Būklė: geras (naudotas), Gamybos metai: 2004, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, For sale is an injection moulding machine from Krauss-Maffei, model 80-220C2. The machine comes from a well-maintained facility that places great value on regular servicing, and is fully operational immediately after installation. Year of manufacture: 2004 Machine number: 61004709 Clamping force: 80 tons Equipment: - Cylinder D35 - 1 hydraulic core pull - Pneumatic needle shut-off - Tie bar puller on the operator’s side Transport and loading can be organised Europe-wide on request and for an additional charge. Prices are subject to VAT. Ijdpfx Aswqmvgjbveib Inspection by appointment is possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery buying / selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, visit our website.

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), Working area: 2800x1600mm, swivel angle: 90°, parallel stroke: 150mm, clamping force: 700kN, connected load: 50kW, including documentation. Iiedpfx Ash Nm S Hsbvjb

Gamybos metai: 1996, būklė: paruoštas naudoti (naudotas), Throughput capacity: 140-180 kg/h, screw diameter: 50-103 mm, screw length: 1300 mm, max. screw speed: 43 rpm, connected load: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, cylinder cooling unit, and screw temperature control. Isdpfxohz Dyas Abveib

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, spaudimo jėga: 2 500 kN, Įranga: dokumentacija / vadovas, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar spacing: 630x630 mm Shot weight: 471 g (PS) Shot volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar spacing: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min. / max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW Ijdpjxqhfysfx Abvjib 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 - 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L Machine Equipment: 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× on operator side + pressure relief system 3. 8-circuit water manifold with solenoid valve shut-off 4. Hot runner control 4 zones (ZE 88.5404) 5. MC6 control with 19" Touch TFT display 6. PV control for injection speed, holding pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving BluePower servo drive system LRX 150 linear robot (Payload &lt

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, X ašies eiga: 1 500 mm, Y ašies eiga: 2 400 mm, Z ašies eigos atstumas: 6 000 mm, Krauss Maffei linijinis robotas Iiodpfx Asyk S Ndobvsb Pagaminimo metai: 2014 X ašis: 1500 mm Y ašis: 2400 mm Z ašis: 6000 mm

Būklė: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, 1600 kVA alyvos/hermetinis transformatorius, Pauwels, pagaminta 2001 m., 21kV/0,69, jungčių grupė Dyn5, aukštos įtampos jungčių lizdai, žemos įtampos porcelianinės įvestys, Pasirinktinai: rodyklinis termometras, pilna hermetinė apsauga, ritinėliai, jungimo plokštelės Iedpfx Ajxwa S Esbvjib

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 160–750 CX Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 10 mm Nozzle orifice: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mould opening force: 86.4 kN Moving platen force: Opening: 44.8 kN Closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mould opening stroke: 650 mm Iisdex Thzpjpfx Abvjb Minimum mould height: 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Injection volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard / option): 390 / 490 rpm Electrical and Hydraulic Equipment Nominal pump motor power: 22 kW Installed heating power: 10.97 kW Number of heating zones (barrel): 5 Dry cycle time (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Krauss Maffei Injection Moulding Machine KM 1100–12000 MX Year of manufacture: 2008 Robot: Wittmann Fully hydraulic clamping system. MC5 control system with colour monitor, integrated control panel, and three built-in USB ports. Plasticizing unit: Complete plasticizing unit for thermoplastics with abrasion-resistant configuration, screw diameter 120 mm, equipped with a non-return valve and open nozzle. Technical specifications Clamping unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (H × V): 2,210 × 1,910 mm Tie-bar spacing (H × V): 1,550 × 1,250 mm Mould opening stroke: 2,000 mm Mould height (min–max): 600 – 1,200 mm Platen movement stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (with accumulator): 1,696 cm³/s Electrical and hydraulic equipment Rated pump motor power: 132 kW Installed heater power: 82 kW Number of barrel heating zones: 7 Dry cycle time (Euromap): 802 1/h Oil tank capacity: 2,440 l Iiedpfx Abex Tgbhsvjb Dimensions and weight Net weight with control cabinet: 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2001, Krauss Maffei KM 800-5000 MC liejimo mašina Pagaminimo metai: 2001 Įranga: robotas Iiodpjx Tfyijfx Abvob Techninės detalės: Uždarymo jėga: 8 000 kN Maksimali formos atidarymo jėga: 356 kN Judančios plokštės eiga (atidarymas): 98 kN Judančios plokštės jėga (uždarymas): 92 kN Plokščių dydis (plotis × aukštis): 1 610 × 1 530 mm Kolonų atstumas (plotis × aukštis): 1 120 × 1 000 mm Formos atidarymo eiga: 1 400 mm Minimali formos aukštis: 600 mm Maksimalus atidarymas: 2 000 mm Hidraulinio stūmiko eiga: 250 mm Sraigto skersmuo: 90 mm L/D santykis: 23 Įpurškimo slėgis: 1 742 bar Įpurškimo tūris: 2 863 cm³ Įpurškimo masė (PS): 2 605 g Bendrieji mašinos duomenys Matmenys (ilgis × plotis × aukštis): 10 500 × 2 860 × 2 890 mm Svoris: 43 000 kg

Gamybos metai: 2013, būklė: geras (naudotas), Prekės ženklas: Krauss Maffei Technologies GmbH Iijdpfx Abeyxn U Tovsb Modelis: KME 38-30 Sraigto tipas: Viengubas sraigtas Pagaminimo metai: 2013 Sraigto skersmuo: 38 mm L/D santykis: 30

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 1 000 mm, įpurškimo slėgis: 1 742 juosta, atvērimo eiga: 2 000 mm, TECHNINĖS DETALĖS Sandarumo jėga: 8 000 kN Maksimali įrankio atidarymo jėga: 356 kN Judančios atidarymo plokštės padavimo jėga: 98 kN Judančios uždarymo plokštės jėga: 92 kN Plokštės dydis (A x P): 1 610 mm x 1 530 mm Stulpelių tarpai (A x P): 1 120 mm x 1 000 mm Įrankio atidarymo eiga: 1 400 mm Minimali įrankio aukštis: 600 mm Didžiausias atidarymas: 2 000 mm Hidraulinio išstūmėjo eiga: 250 mm Sraigto diametras: 90 mm L/D santykis: 23 Įpurškimo slėgis: 1 742 bar Įpurškimo tūris: 2 863 cm³ Šūvio svoris (PS): 2 605 g MAŠINOS DETALĖS Iisdpfxexup Nne Abvjb Išmatavimai ir svoris Išmatavimai (I x P x A): 10 500 x 2 860 x 2 890 mm Svoris: 43 000 kg Veikimo valandos: 70 000 h

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 9 500 kN, varžto skersmuo: 120 mm, išstūmimo eiga: 300 mm, atvērimo eiga: 1 900 mm, TECHNINĖS DETALĖS Uždarymo jėga: 9 500 kN Atidarymo jėga: 665 kN Stulpelių atstumas: 1 400 x 1 150 mm Tvirtinimo plokštės: 1 960 x 1 710 mm Atidarymo eiga: 1 900 mm Min. formos aukštis: 500 mm Maks. formos aukštis: 1 200 mm Maks. atidarymo plotis: 2 400 mm Išstūmimo eiga: 300 mm Aukštos našumo sraigtas HPS-UN, skersmuo: 120 mm Antgalio spindulys: 30 mm Iodpfx Abexup Sisvjib Antgalio anga: 12 mm Sraigto skersmuo: 120 mm Lietinio svoris (HDPE): 5 420 g Lietimo tūris: 7 634 cm³ Specifinis įpurškimo slėgis: 2 257 bar ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 12 770 x 3 420 x 2 750 mm Įrenginio svoris: 61,5 t

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 100 mm, įpurškimo slėgis: 1 742 juosta, formos aukštis (min.): 600 mm, atvērimo eiga: 1 150 mm, plokštės plotis: 1 440 mm, plokštės aukštis: 1 490 mm, Injection moulding machine with Wittmann automation TECHNICAL DETAILS Clamping force: 6,500 kN Mold opening force: 346 kN Sliding platen opening force: 169 kN Sliding platen clamping force: 144 kN Mounting platen dimensions: 1,490 mm x 1,440 mm Clear tie bar spacing: 1,000 mm x 930 mm Mould opening stroke: 1,150 mm Minimum mould height: 600 mm Injection unit Screw diameter: 100 mm Injection pressure: 1,742 bar Injection volume: 2,411 cm³ Shot weight for PS: 2,170 g Injection rate: 649 cm³/s Wittmann W643 Robot X-axis servo: 1,200 mm Y-axis servo: 2,400 mm Z-axis servo: 6,000 mm C-axis servo: +/- 90° Iiodjwp Si Nspfx Abvsb A-axis servo: +/- 180° Vacuum: 4 circuits Gripper: 4 circuits Electrical and hydraulic equipment Pump motor rated power: 90 kW Installed heater power: 44 kW Number of barrel heating zones: 7 Oil tank capacity: 1,240 l MACHINE DETAILS Net weight with control cabinet: 39.5 t Operating hours: 70,000 h MAINTENANCE All hydraulic lines replaced 12/24 Last inspection Krauss Maffei 24.03. New (hydraulic) screw drive 25.01. New non-return valve 01/25 FEATURES - Fully hydraulic clamping system - MC 4 control system with colour monitor and integrated operator panel - Built-in floppy disk drive - Complete plasticising unit for thermoplastics with 100 mm screw diameter, check valve and open nozzle

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Krauss Maffei Injection Moulding Machine KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control: MC4 with colour monitor, operator panel, and diskette station Iijdpfxoxak Uce Abvob 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Movable platen force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Mould opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Injection volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (increased speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles (according to Euromap): 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions and Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m