Klingelnberg Kūginių Krumpliaračių Bandymo Mašina pirkti naudotą (40 267)

Būklė: naudotas, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as the control and evaluation software for ZwickRoell materials testing machines. It enables standards-compliant testing procedures, logs measurement data, and supports traceability, etc. Windows 11 Compatibility: The ZwickRoell testing software (particularly testXpert III) supports current Windows platforms, making its use with Windows 11 possible and intended. Item Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) This system comes from a laboratory setting and was used for mechanical material testing at ambient and high temperatures. All units are pre-owned, well maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Max. Test Force: 100 kN AC Drive 4 kW, widened floor-standing version (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, Current draw 9 A Working Area: Height 1,765 mm, Width 1,030 mm Crosshead Speed: 0.0005 – 1000 mm/min Positioning Accuracy: < 2 µm Noise Level: ≤ 70 dB(A) Max. Test Force (Fnom): 100 kN Drive: AC Drive 4 kW (widened floor-standing version, W) Test Force Range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Supply Voltage: 400 V / 50–60 Hz / 3Ph+N+PE Current Draw: 9 A Power Consumption: 5.0 kVA Load Frame Height: approx. 2.32 m Working Area Height: 1,765 mm Working Area Width: 1,030 mm Machine Weight: approx. 1,820 kg Crosshead Speed: 0.0005 – 1000 mm/min Positioning Accuracy: < 2 µm Noise Level: ≤ 70 dB(A) Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High Temperature Furnace Max. Temperature: 1200°C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal Force: 100 kN Protection Class: IP67 Precise force measurement according to ISO 7500/1 Weight: 20 kg, GTM design Iedpfxext Hn So Aauetf Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (see photos) - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) - Connecting cables and mounting materials (as available) (Technical specifications subject to change and errors excepted!) Should you have any further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Haida Model: HD-B604-S Sensor: TECSIS load cell Max. capacity: 2T / 20 kN Units: G, kg, N, LB (selectable) Resolution: 1/250,000 Accuracy: ± 0.5% Max. stroke: 700 mm (without fixture) Test speed: 0.1-500 mm/min (adjustable) Voltage: 220V AC ± 10%, 50/60Hz Clamping range: 0-7 mm Weight: approx. 175 kg Dimensions (W x D x H): 88 x 50.5 x 150 cm Condition: used Itodpfsr Ixq Rex Aauef Scope of delivery: (see image) (Specifications and data subject to change and errors reserved!) If you have any further questions, we would be happy to answer them by phone.

Gamybos metai: 2025, būklė: naudotas, Universal Testing Machine PM10 Force: 10 kN Crosshead stroke: 700 mm Test space: 400 mm Overall height: 1230 mm Weight: approx. 85 kg Position resolution: 0.01 mm Test speed: 1–500 mm / min Return speed: 700 mm / min Load cell: 10 kN Including evaluation electronics and basic software. Our testing machines can be operated in stand-alone mode using a numeric keypad, allowing for “quick testing” even without a PC. For tests that require data storage and curve recording, our basic software enables control and evaluation. This allows you to generate various test sequences and create a test report. You also have the option to further process the raw data in your own software. Optional: - Delivery & commissioning - DAkkS or factory calibration according to DIN EN ISO 7500-1 - Grips and fixtures: Iodsyc U Ugepfx Aauetf Compression plates, bending fixtures, shear devices, wedge grips, scissor grips, peeling grips, screw grips, pneumatic grips, and hydraulic grips.

Gamybos metai: 1963, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D44L/7979, Pasiūlymo numeris: D44L/7979 Itjdpfx Ajwi Syzoauof Mašinos tipas: Bandymų staklės Gamintojas: LOSENHAUSEN Modelis: UHP 40000 kp Metai: 1963 Tempimo jėga: 20 - 400 kN Maks. tempimo eiga: 1100 mm Spaudimas: 40 t Vieta: Mūsų sandėlyje

Būklė: naudotas, Zwick Itedpfx Aasx A Aaijujf Tipas: HA 50 Matmenys: H 2685 mm x P 1040 mm x G 750 mm Užstatymo plotas: 1600 cm² Techniniai duomenys: Fmax: 50 kN Vmax: 1500 mm/s Darbinės zonos aukštis maks. 1370 mm Darbinės zonos plotis 565 mm Priedai: Kistler jėgos jutiklis 50 kN per NI-Labview Hidraulinis agregatas 280 bar Pastatymo plotas: 415 cm² Įtempimo įrankis / mėginių laikiklis yra komplekte (Universalus flanšas, ypač tvirtos žnyplės mėginių laikikliui) Kompiuteris + programinė įranga testXpert R V6.0.0 Būklė: naudotas Pristatymo apimtis: (žr. nuotrauką) Svoris apie 1200 kg be rėmo ir pan. (Techniniai duomenys ir specifikacijos gali būti keičiami; informacija nėra galutinė!) Jei turite daugiau klausimų, mielai atsakysime telefonu.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1988, SARATOV 5C280P spiralinė kūginė dantračių generavimo staklė — 2 vienetai Didžiausias dantračio skersmuo: 800 mm Didžiausias modulis: 16 Didžiausias žiedo plotis: 125 mm Dantų kiekis: 5–150 Veleno sūkių diapazonas: 20–125 aps./min Pagrindinio variklio galia: 7,5 kW Bendri matmenys (IxPxA): 3170x2180x2200 mm Svoris: 15 t SARATOV 5C276 Tiesių kūginių dantračių generavimo staklės Modulis, mm: 10 Didž. dantračio skersmuo, mm: 500 Didž. kūginių ratų centro atstumas, mm: 250 Didž. žiedo plotis, mm: 80 Iodpfxjum Ez Rj Aauotf Mažiausias dalijimosi kūgio kampas, laipsniai: 5 Dantračio dantų skaičius: 10–150 Atstumas tarp veleno ir staklių centro, mm: – maks. (kampas 5°) 375 mm; – min. (kampas 90°) 75 mm Eigos ilgis, mm: 100 Slankiklio dvismūgiai, smūgiai/min: 48–400 Variklio galia, kW: 4,0 Staklių svoris, kg: 8750

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universalus bandymo aparatas Skirtas medžiagų bandymams / medžiagų testavimui Tikrina tempimo stiprumą, sukibimo stiprumą ir kirpimo stiprumą mūro bei medžio junginiams ir panašiai. - Vinių ištraukimo bandymas - Spaudimo bandymas cemento ir skiedinio prizmėms - Lankstymo bandymas cemento ir skiedinio mėginiams - Tankinimo bandymas - Lankstumo bandymas medienai, betonui - Kirpimo stiprumo bandymas medienai - Skėlimo bandymas medienai Isdpfxsxmv H Re Aaujtf - Pastolių jungties bandymas - Kirpimo stiprumo bandymas mūro sistemoms - Tempimo bandymas mūro sistemoms - Tempimo bandymas statybinei armatūrai - Tempimo bandymas medienai - Ištraukimo bandymas statybinei armatūrai - Atgalinės lenkimo bandymas statybinei armatūrai - Kaiščių ištraukimo bandymas - Sukibimo bandymas Dėl bandymų mašinos veikimo esu sukūręs vaizdo įrašą. Šį vaizdo įrašą galiu atsiųsti į mobiliojo telefono numerį per WhatsApp ar Signalą!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 53 244 h, Funkcionalumas: visiškai funkcionalus, Techniniai duomenys – Gleason Phoenix II 600HC (CNC hipoidinių dantračių pjovimo staklės) Darbinė sritis Maks. ruošinio skersmuo Ø 600 mm Maks. danties gylis 24,6 mm Maks. krumpliaračio plotis 110 mm Dantų skaičius 1–300 Frezos galvos dydis, plokščioji freza (FM) 18" diametras Frezos galvos dydis, apvijos freza (FH) 210 mm spindulys Maks. frezavimo veleno apsukos 600 min⁻¹ Darbinis velenas Priekinio kūgio skersmuo Ø 203 mm Kūginės skylės skersmuo Ø 181 mm Gręžimo gylis 884 mm Maks. darbinio veleno apsukos 600 min⁻¹ Ijdpfsxwzu Isx Aaustf Matmenys ir svoris Užimamas plotas (I × P × A) 4,4 × 3,5 × 3,5 m (įskaitant periferiją) Mašinos svoris 26 000 kg Prijungimo duomenys Bendra prijungimo galia 139 kVA Priešsaugiklis 200 A Darbinė įtampa 400 V Dažnis tinkle 50 Hz Valdymo įtampa 24 V DC

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC kūginių krumpliaračių frezavimo staklės su lanko dantavimu Gleason Nr. 631 Pagaminimo metai: 2011 Isdpjw Tfb Ssfx Aauotf Valdymas: SIEMENS 840d Modernizuota 2011/2012 m. su nauja valdymo sistema, pavaromis ir kt. Staklės buvo pilnai kapitaliai suremontuotos 2011 m. Įdiegta nauja valdymo sistema ir pavaros.

Būklė: naudotas, Gamybos metai: 1978, Diameter 0 mm Workpiece length 0 mm Total power requirement kW Isdpfx Aajt Hwpgoujtf Machine weight approx. t Space requirement approx. m Crack detection device for series parts

Būklė: naudotas, Gamybos metai: 1980, Raddurchmesser - max. 2500 mm Radbreite 0 mm Modul - max. 34 Modul - min. 1 Gesamtleistungsbedarf ca. 15 kW Maschinengewicht ca. 15 t Raumbedarf ca. 4,20 x 2,00 x 2,90 m K L I N G E L N B E R G (Deutschland) Universale Verzahnungs- und Schraubungsmessmaschine Modell PFSU 2500 Baujahr ca. 1980 Serien-Nr. B 2918 _____ min/max Zahnrad-Ø 250 – 2.500 mm Modulbereich 1 – 34 Größter Grundkreis-Ø 2.400 mm Messbare Zahnflankenlänge 500 mm Hub des Messschlittens, ca. 600 mm Schrägungswinkel 0 – 45 ° Werkstücklänge zwischen Spitzen min./max. 430 – 2.500 mm Werkstück-Ø in Gegenauflage 1.340 mm Werkstücktisch-Ø 690 mm Diagrammvergrößerung 50/100/200/500/1000/2000 : 1 Max. zulässiges Prüfgewicht Zahnrad, ca. 10.000 kg Gesamtelektrische Anschlussleistung, ca. 15 kW – 380 V – 50 Hz Maschinengewicht, ca. 15.000 kg Itodst Hw Aaepfx Aauof Die Maschine ist geeignet zur Vermessung des Zahnprofils und der Zahnflankenspuren an schweren gerade- und schrägverzahnten Stirnrädern. Zubehör / Sondermerkmale: * Digitale Einstellung des Grundkreises und digitaler Winkel ohne Grundkreisscheiben. * Längenverstellbare Halterung für Teilungsprüfer, jedoch keine Prüfeinheit vorhanden. * Schwere Werkstücke können gemessen werden. Motorischer Einricht-, Ausricht- und Prüfprozess per Knopfdruck. * Gegenlager kann zum Beladen schwerer Zahnräder und Kettenräder nach hinten geschwenkt werden, weiteres Zubehör vorhanden. Zustand: Diese Messmaschine muss überholt und mit einer neuen CNC-Steuerung nachgerüstet werden. Die Grundmaschine ist jedoch in einem ordentlichen Zustand und daher lohnt sich die Überholung sicherlich. Maschine kann nicht unter Strom besichtigt werden. Teile des Bedienpanels sind nicht vorhanden.

Būklė: naudotas, Gamybos metai: 1997, Wheel diameter - max. 215 mm Wheel width 40.65 mm Module - max. Total power requirement 20 kW Machine weight approx. 10 t G L E A S O N (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model PHOENIX HG 200 Year of construction 1997 Max. external diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth: 5 - 200 Maximum gear ratio: 1 : 10 Grinding wheel diameter: 51-190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Ijdpfxst Hwxhs Aaustf Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: • FANUC – 7-axis CNC control type 150 MB with monitor and direct data entry, automatic calculation of all workpiece and grinding parameters • Large, sophisticated coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC-controlled compensation for wheel form and diameter after each dressing cycle • Gear grinding can be performed either as single part processing with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional “dressable” aluminium oxide, depending on cost. Grinding with a conical wheel provides advantages in terms of heat management and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured in high quality, with consistent accuracy, cost-efficiently, and with short setup times. Please refer to the brochure copy on our website for additional details. Condition : very good – can be demonstrated under power Delivery : ex stock - as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. Further gear manufacturing machines always in stock. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: - FANUC – 7-axis CNC control type 150 MB with monitor and direct data input, automatic calculation of all workpiece and grinding parameters - Large, sophisticated coolant system with filtration, band filter, etc. - Powered grinding wheel dressing unit with CNC dressing control for automatic form and diameter compensation after each dressing - Gear grinding can be performed either as single part processing with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional dressable aluminum oxide wheels (cost dependent). Grinding with a conical grinding wheel...

Būklė: naudotas, Gamybos metai: 1980, Maximum wheel diameter: 400 mm Wheel width: N/A mm Maximum module: 5 Minimum module: Iedpet Hw Ebofx Aaujtf Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Manual double-flank rolling tester

Būklė: naudotas, Gamybos metai: 1980, Wheel diameter - max. 1010 mm Wheel width 0 mm Module - max. Module - min. Total power requirement 15 kW Machine weight approx. 9.5 t Itsdpfx Aajt Hwniouof Space requirement approx. m G L E A S O N (USA) "CURVIC-Coupling" - Automatic Coupling Grinding Machine Type 120 (888), Year of manufacture 1980 Serial no. 763402 Max. tooth height 10 mm Max. swing diameter of workpiece 1,010 mm Max. outside diameter of CURVIC teeth 610 mm Retraction of workpiece slide plate 216 mm Max. distance grinding wheel to workpiece nose 90-430 mm Max. workpiece weight incl. clamping device approx. 500 kg Number of teeth range 32 - 150 Grinding wheel diameter approx. 152 - 320 mm Grinding wheel speed, stepless 0 - 3,600 RPM Workpiece spindle bore 60 mm Total drive power approx. 15 kW - 380 V - 50 Hz Weight approx. 9,500 kg Accessories / Special equipment: Automatic rough grinding and finish grinding by means of presettable counters and integrated feed curves Counter for number of teeth Counter for number of dressing cycles 2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and dressing wheel tip Mounted index plate for 48 teeth Separate coolant unit with band filter, separate hydraulic system Freestanding oil mist extraction unit by TRION, various small parts

Būklė: naudotas, Gamybos metai: 1975, Wheel diameter – max. 160 – 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Itsdst Hwptjpfx Aauef Machine weight approx. 3 t Required space approx. m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Lead Inspection Type: PFSU 1600 Year of manufacture: 1975, modernized in 1995 # B 2281 Working range: Min./max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Max. gear width: 250 mm Probe carriage stroke approx.: 300 mm Max. helix angle: 0 – 90° Max. workpiece length between centers: approx. 1,150 mm Tailstock offset: 450 mm Chart recorder magnification: 50/250/500/1000 x Max. test gear weight approx.: 4,000 kg Weight approx.: 3,000 kg Total drive: approx. 1 kW – 380 V – 50 Hz Suitable for testing: – Gear profile (involute) – Tooth direction (helix angle/lead) on internal and external gears, hobs, gear shaper cutters, and worms, etc. – Gear runout, surface roughness – Determination/reconstruction of the base circle and helix angle, etc. Accessories / Special features: – Optical base circle and angular setting, no base circle discs required anymore – High workpiece weight achievable by design; motorized and manual operation via handwheels – Rotating index table, Ø 480 mm, for setting up larger gear bodies with 2 sets of different extension supports (400 mm and 470 mm long) for gear diameters up to max 1,600 mm – Counter-support AV 17 for max. workpiece length between centers of 1,150 mm – Separate electrical cabinet for controlling manual movements – Includes GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German; program update to the current version V 21.17 available; ideal for creating modern inspection reports with graphics, also visually displayed on monitor; other subprograms, HP printer, flat-screen monitor – Various probe inserts, small parts, as well as height-adjustable mount for a pitch inspection device (device not included, but mounting available and rear-mounted), leveling feet, etc. Condition: Very good – ready for demonstration; professionally dismantled and assembled.

Būklė: naudotas, Gamybos metai: 2008, Maximum transmission ratio 10:1 Number of teeth - min. 3 Number of teeth - max. 200 Tooth height 20 mm Itedpfx Aaovxwmtjuof Max. tooth width 58 mm Grinding spindle speeds stepless up to 6,000 rpm Workpiece spindle speed 1,200 rpm Max. tool diameter 230 mm Min. tool diameter 69.85 mm X-axis 325 mm Y-axis 350 mm Z-axis 470 mm B-axis +90.1 / -1° Workpiece table - Ø 212.71 mm Control system: SIEMENS SIN 840 D Total power requirement 75 kW Machine weight approx. 10,000 kg Space requirement approx. 6.10 x 4.40 x 3.30 m Internal measuring probe Renishaw LP2 (axes X2; Y2) Hoffmann coolant filter system HSF 100SE/K (year 2008) Tank capacity 2,500 L VT oil mist extraction system

Būklė: naudotas, Gamybos metai: 2006, Maximum transmission ratio: 10:1 Number of teeth - min. 3 Number of teeth - max. 200 Tooth height: 20 mm Max. tooth width: 58 mm Continuously variable grinding spindle speed: 6,000 rpm Workpiece spindle speed: 1,200 rpm Max. tool diameter: 230 mm Min. tool diameter: 69.85 mm X-axis: 325 mm Y-axis: 350 mm Ijdpfx Ajvxwr Asauotf Z-axis: 470 mm B-axis: +90.1 / -1° Workpiece table - Ø 212.71 mm CNC control: SINUMERIK 840 D SIEMENS Total power requirement: 75 kW Machine weight: approx. 10,000 kg Space requirement: approx. 6.10 x 4.40 x 3.30 m Coolant filtration system: Hoffmann HSF 100 V

Gamybos metai: 2003, būklė: Defektas atsarginių dalių laikiklis (naudotas), Test description Iodpfxshvaldo Aaustf

Būklė: paruoštas naudoti (naudotas), Generator de roți dințate conice drepte SARATOV 5C276P Max modul: 10 Diametru maxim roată dințată: 500 mm Distanță maximă con roți dințate: 250 mm Lățime maximă inel roată: 80 mm Itsdpfx Ajuc T Hxsauef Unghi minim al conului de divizare (pas), grade: 5 Număr de dinți roată: 10 – 150 Distanță între ax și centrul mașinii, mm: – max. (unghi piesă brută 5°) 375 mm; – min. (unghi piesă brută 90°) 75 mm Cursă: 100 mm Cursă dublă slider: 48 – 400 curse/min Putere motor: 4 KW Dimensiuni mașină: 2885 x 2570 x 1995 mm Greutate mașină: 8750 kg

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 0032703, Priedai: - Palyginimo plokštelė 63,3 HRC - Palyginimo plokštelė 58,5 HR30N - Tikrinimo svoriai 150, 100, 60, 45, 30 kgf - Išankstinės apkrovos svoris - V formos priekalas - Gulsčiukas - Deimantinis įspraudiklis - Plieninis rutulinis įspraudiklis 1/8'' - Plieniniai pakaitiniai rutuliukai 1/8'' - Dulkių apsauginis gaubtas Iodjx E U U Hepfx Aauotf - Naudojimo instrukcija Deimantinis įspraudiklis ties smailės apačia yra šiek tiek pažeistas (nedidelis nuskilimas – žr. nuotraukas).

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Tensile / Universal Testing Machine, 200 kN test force, excellent WINDOWS software (freely programmable test procedures), over 600 pre-configured test results. GALDABINI: >30,000 machines delivered worldwide / Germany >1,000 Important note before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are 'obsolete', these machines—often purchased at high cost—must be modernized (electronics, software for WIN10/11, DC disc armature motor + motor controller). The total cost for purchase, transport, retrofit, commissioning, and refurbishing can turn into an expensive dead end. And one year later, the gearbox—which is no longer available—fails (... ?). New GALDABINI Universal Testing Machines with 2-year warranty, BECKHOFF electronics, premium testing software are often more cost-effective, comply with ALL standards, and are universally suitable for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screws Iedpfx Aascyamwjustf * Force transducers with error margin 0.5% at 1/100 | 1% at 1/500 * Etc. Machine price EXCLUDES clamping fixtures—these must be selected according to your specific testing requirements. Included in the price: - Fully functional machine with 2-year warranty - Force accuracy: 2 to 200 kN

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Tensile / Universal Testing Machine, Test Force 2.5 kN, outstanding WINDOWS software (freely programmable test sequences), over 600 preconfigured test results. GALDABINI: More than 30,000 machines delivered worldwide / over 1,000 in Germany Important notice before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are obsolete, and these expensively purchased machines "must" be modernized (electronics, software for WIN10/11, DC disc rotor motor + motor controller). The final total for purchase, transport, retrofit, commissioning, and post-adjustment can turn into an expensive dead end. And a year later, the gearbox—which is no longer available as a spare part—fails (…?). A new GALDABINI universal testing machine with 2-year warranty, BECKHOFF electronics / premium test software, is often more affordable, conforms to ALL standards, and is universally suitable for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screw drives Ijdpfxecw Ix So Aaustf * Load cells: from 1/100 accuracy error 0.5% | 1/500 accuracy error 1% * etc. Machine price WITHOUT gripping fixtures – these must be selected for your specific testing application. Price includes: - Fully functional machine with 2-year warranty - Force accuracy: 0.25 to 2.5 kN (

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Tensile / Universal Testing Machine with 50 kN test force, excellent WINDOWS software (freely programmable test sequences), over 600 ready-to-use test result templates. GALDABINI: Over 30,000 machines delivered worldwide / over 1,000 in Germany Important note before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are "obsolete"; these expensive machines "must" be upgraded (electronics, software for WIN10/11, DC disc rotor motors + motor controllers). The total cost for purchase, transport, retrofit, commissioning, and required modifications can quickly turn into an expensive dead end. And a year later, the gearbox, which is no longer available as a spare part, may fail (... ?). Isdpfx Aaoptcmjuotf A new GALDABINI universal testing machine with 2-year warranty, BECKHOFF electronics, and premium test software is often more cost-efficient, fully compliant with ALL standards, and is universally suitable for: * Tensile testing, compression testing, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH precision ball screw drives * Load cells with accuracy from 1/100 at 0.5% error | 1/500 at 1% error * etc. Machine price EXCLUDES clamping fixtures – these must be selected according to your testing requirements. Included in the price: - Fully functional machine with 2-year warranty - Force measurement accuracy: 0.5 to 50 kN (

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Tensile / Universal Testing Machine, test force 100 kN, outstanding WINDOWS software (freely programmable test procedures), over 600 predefined test results. GALDABINI: more than 30,000 machines delivered worldwide / over 1,000 in Germany Iodscxwq Rjpfx Aaustf Important notice before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are ‘obsolete’, these expensive machines ‘must’ be upgraded (electronics, software for WIN10/11, DC disc rotor motor + motor controller). The total cost for purchase, transport, retrofit, commissioning, and post-purchase corrections can quickly turn into an expensive dead-end. And a year later, the gearbox—which is no longer available—fails (... ?). New GALDABINI universal testing machine with 2-year warranty, BECKHOFF electronics / premium test software are often cheaper, comply with ALL standards, and are ideally suited for: * Tensile tests, compression tests, bending tests, cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screws * Load cells with accuracy: 1/100 error 0.5% | 1/500 error 1% * etc. Machine price WITHOUT clamping fixture - must be selected specifically for your testing application. Included in the price: - Machine fully functional with 2-year warranty - Force accuracy: 1 to 100 kN

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Tensile / Universal Testing Machine with 1200 kN test force, excellent WINDOWS software (freely programmable test sequences), over 600 ready-made test result templates. GALDABINI: More than 30,000 machines delivered worldwide / over 1,000 in Germany Important note before purchasing used universal / tensile testing machines: WIN XP / WIN 7 are “obsolete,” and these expensive machines "must" be modernized (electronics, software for WIN10/11, DC disc rotor motor + motor controller). The final cost for purchase, transport, retrofit, commissioning, and subsequent improvements can easily become a costly dead end. And one year later, a gearbox that can’t be sourced fails (... ?). A new GALDABINI universal testing machine with 2-year warranty, BECKHOFF electronics, and premium test software is often more cost-effective, complies with ALL standards, and is universally suitable for: * Tensile, compression, bending, and cyclic tests * Brushless AC motor, digital motor controller, BOSCH-REXROTH ball screw drives Itjdpfedb Ndcox Aausf * Load cells with up to 1/100 error at 0.5% | 1/500 error at 1% * etc. Machine price WITHOUT clamping fixtures – must be selected for your specific testing task. Price includes: - Fully functional machine with 2-year warranty - Force accuracy: from 12 to 1200 kN