Kk-Industries Cyl 140-12/4.5 pirkti naudotą (50 968)

Būklė: naujas, Press force: 150Motor: 15Installation height: 500Stroke length (max.): 400Table size: 900 x 600Ram area: 900 x 600Table height: 850Dimensions (LxWxH): approx. 1300 + (300 control cabinet) x 2000 x 3200Weight approx.: 8000Oil fill: 400Hydraulic C-frame Press General Information: Design: C-frame construction, hydraulic Pressing force: 150 t at 240 bar Return force: 30 t at 150 bar Voltage: 400 V / 50 Hz Standards: Machinery Directive EN 693 Paint: RAL 7035 – Light gray Warranty: 12 months Dimensions (WxDxH): approx. 1300 + 300 mm control cabinet x 2000 x 3200 mm Total weight: approx. 8,000 kg Control System: Mode 1: Setup mode without light sensor Mode 2: Automatic operation (single stroke) with light sensor PLC control: Siemens S7–1200 Safety PLC: SICK Swiveling operator panel with soft starter Two-hand control (mobile) Light sensors: SICK 700 + 130 mm Stroke measuring system: Linear scale (500 mm) Touchscreen: 9'' Siemens, memory for up to 500 tool sets Remote maintenance: Secomea module 8 free inputs/outputs for external connection (e.g., robot, coil system) Workspace lighting (double) Hydraulic System: Main cylinder: Ø 270 mm Auxiliary cylinders: 2 x Ø 70 x 40 mm Auxiliary guides: 4 x Ø 50 mm Motor: 15 kW / 22 HP (IE3) Auxiliary motor: 2.2 kW / 3 HP Pump: 45 cm³, 65 l/min – REXROTH Auxiliary pump: present Tank capacity: 500 l Oil volume: 400 l Air cooler for oil tank Hydraulic accessories: REXROTH hydraulic block & valves, prefill valve, hydraulic & mechanical ram lock (top dead center position) Pressure & speed adjustable via PLC Mechanical Data: Installation height: 500 mm (distance ram – table plate) Stroke length: 400 mm Insertion depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top edge of table plate) Plate dimensions: Table plate: 900 x 600 x 120 mm (with T-slots, customer-specific) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welds) Speeds (adjustable via PLC): Approach: 120 mm/s Itsdpfewzzzfex Ab Noi Return: 140 mm/s Pressing phase: 13 – 5 mm/s Control & Electronics: Main control cabinet Pressure & speed settings via PLC Swiveling operator panel Mobile two-hand operation SICK light sensors Stroke measuring system Display: 9'' Siemens touchscreen Remote maintenance via Secomea module Safety & Operation: Hydraulic proportional valves Dual-channel safety Side safety doors (sliding to the rear) Operating manual & parts list (German), incl. maintenance plan

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Weight approx.: 8,500 kg Dimensions (LxWxH): 4,650 x 1,700 x 1,800 mm Technical data: Sheet thickness: 6 mm Cutting length: 4,200 mm Cutting angle: 1.50° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 4,650 mm Width: 1,700 mm Height: 1,800 mm Iedpfjd Ab Hhjx Ab Neti Weight: 8,500 kg Equipment: Swing cut design NC preset control ELGO P 40 T Touch with backgauge and blade gap adjustment from the front via the control panel Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on swiveling arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Blade gap adjustment Cutting line illumination Wide support table with ball transfers Folding finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot Easy blade changing and re-sharpening Adjustable cutting length for efficient processing Lower blade with 4 usable edges Upper blade with 2 usable edges Qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE standards

Būklė: naujas, Sheet length: 4,200 mm Sheet thickness: 13.0 mm Cutting width: 4,200 mm Total power requirement: 18.5 kW Weight approx.: 13,800 kg Dimensions (LxWxH): 4,650 x 2,270 x 2,000 mm Itsdpsd Ab Hiefx Ab Nei Technical Specifications: Sheet thickness: 13 mm Cutting length: 4,200 mm Cutting angle: 1.80° Backgauge: motorized, 1,000 mm Motor power: 18.5 kW Length: 4,800 mm Width: 1,270 mm Height: 2,000 mm Weight: 13,800 kg Equipment: Swing beam shear design NC-preselection control ELGO P 40 T Touch with backgauge and cutting gap adjustment from the front via the control unit Motorized backgauge up to 1,000 mm Clearly arranged control panel mounted on a swivel arm Hydraulic hold-downs positioned close to the cutting edge Footswitch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers 1,000 mm foldable finger guard 1 T-slot side gauge 2 sheet support arms with T-slots Easy blade change and regrinding Adjustable cutting length for efficient processing Lower blade can be rotated four times Upper blade can be rotated twice Qualified customer service Operating manual in ENGLISH Machine and equipment compliant with CE regulations

Būklė: naujas, Shaft diameter: 60 Upper roller diameter: 215 Lower roller diameter: 215 High-performance hydraulics: 16 Working speed: 4 Motor power: 1.5 Length: 1000 Width: 1400 Height: 1650 Weight approx.: 950 Technical Data: - Welded steel frame - 3 rollers are motor-driven - Hardened shafts made from special steel - Upper roller adjustable hydraulically - Horizontal and vertical working position - Standard rolls - Guide rolls - Equipped with brake motor for precision bending - Portable control panel Isdpfx Abod Ab H Rj Neti Options: - Digital display €700 - NC-unit €7,000 - Lateral guide rolls €1,400 HPK 50 file Type Size Min. Dia Notes 1 60x10 20x10 600 300 Standard Rolls 2 100x15 50x10 600 300 Standard Rolls 3 35x35 15x15 600 300 Standard Rolls 4 Ø35 Ø20 600 300 Optional Rolls 5 Ø70x2 Ø25x1.5 1200 400 Optional Rolls 6 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7 70x30x3 30x15x2 1500 400 Optional Rolls 8 50x3 20x2 1600 400 Optional Rolls 9 50x50x6 30x30x3 600 400 Optional Rolls 10 50x50x6 30x30x3 900 600 Optional Rolls 11 60x7 30x4 600 400 Standard Rolls 12 60x7 30x4 700 400 Standard Rolls 13 60x7 30x4 700 400 Standard Rolls 14 UPN 80 UPN 30 800 400 Optional Rolls* 15 UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are given for plate yield strength of 260 N/mm²

Būklė: naujas, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Approximate weight: 1,150 kg Total power requirement: 4 kW Sheet thickness: 6 mm Details: Itjdpfjd Ab Idsx Ab Nji - Hydraulic drive - Blade length: 200 mm - Notching angle adjustable from 60° to 140° for 6 mm thickness - Notching angle adjustable from 30° to 59° for 4 mm thickness

Būklė: naujas, Sheet thickness: 35 mm Bending length: 4100 mm Top roll diameter: 540 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movements of the bottom roll are hydraulically driven - Mobile control panel - In compliance with CE standards Options: - Variable rotation speed: EURO 6,940 - Material feed table: EURO 5,100 - Oil cooler: STD - Central support: EURO 18,750 - Side supports: EURO 17,000 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll Itjdpfjd Ab N Ijx Ab Noi - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 70 Bending length: 2100 Upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 rolls arranged symmetrically - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic positioning - Top and bottom rolls are driven by hydraulics and gearbox - Vertical movement of the lower roll is hydraulically operated - Movable control panel - In accordance with CE standards Ijdpfx Absd Ab N Sj Nsti Options: - Variable rotation speed EURO 6,940 - Material feeding table EURO 5,100 - Oil cooler STD - Central support EURO 19,500 - Side supports EURO 10,400 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable bottom roll support system (for special customer requirements) We have many references!

Būklė: naujas, Sheet thickness: 45 Bending length: 3100 Top roll diameter: 480 - Technical specifications: Itjdpod Ab Rcjfx Ab Nji - Hardened and polished rolls - Complete frame made of ST-52 steel - The 4 rolls are arranged symmetrically - Hydraulically driven top cover for easy material removal - Digital display for bottom and side roll position - Hydraulic adjustment - Top and bottom rolls are driven by hydraulics and gearbox - The vertical movements of the bottom roll are hydraulically driven - Movable control panel - Conforms to CE standards Options: - Variable rotation speed (on request) - Material feed table (on request) - Oil cooler (on request) - Central support (on request) - Side supports - Automatic material extractor (on request) - PLC control (on request) - CNC control (on request) - Automatic material loading system (on request) - Interchangeable top roll (on request) - Adjustable bottom roll support system (for special customer requirements) (on request) We have many references!

Būklė: naujas, Sheet thickness: 45 Bending length: 2100 Top roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete frame made of ST-52 steel - 4 symmetrically arranged rolls - Hydraulically operated top cover for easy material removal - Digital display for lower and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulic system and gearbox - Vertical movement of lower roll hydraulically powered - Movable control console - In compliance with CE standards Options: - Variable rotation speed: EUR 5,858 - Material feed table: EUR 3,506 - Oil cooler: EUR STD - Central support: EUR 13,600 - Side supports: EUR 9,600 - Automatic material extractor Iedpfx Abjd Ab Rno Njti - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have numerous references!

Būklė: naujas, Sheet thickness: 13 Bending length: 4100 Top roll diameter: 360 Technical specifications: - Hardened and polished rolls - Entire body made of ST-52 steel - The 4 rolls are symmetrically arranged - Hydraulically operated top cover for easy material removal - Digital display for bottom and side roll positions - Hydraulic adjustment - Top and bottom rolls driven by hydraulics and gearbox - Vertical movements of the lower roll are hydraulically powered - Movable control panel Itedpfx Abod Ab Rue Nsi - In accordance with CE standards Options: - Variable rotation speed EURO 4,681 - Material feed table EURO 3,400 - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 12,516 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Exchangeable top roll - Adjustable lower roll support system (for special customer requirements) We have many references!

Būklė: naujas, Sheet thickness: 6 mm Bending length: 3100 mm Top roller diameter: 210 mm Technical specifications: - Hardened and polished rollers - Complete frame made of ST-52 steel - The 4 rollers are arranged symmetrically Iodpod Ab Sdjfx Ab Njti - Hydraulically operated top cover for easy material removal - Digital display for lower and side roller positions - Hydraulic adjustment - Top and bottom rollers powered by hydraulics and gearbox - Vertical movements of the lower roller are hydraulically driven - Movable control panel - In compliance with CE standards Options: - Variable rotation speed EUR 4,681 - Material feed table EUR 3,400 - Oil cooler EUR 1,040 - Central support EUR 8,250 - Side supports EUR 7,070 - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Interchangeable top roll - Adjustable lower roller support system (for special customer requirements) We have an extensive list of references!

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 45 mm Top roll diameter: 510 mm Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted on bearings Itsdpjd Ab Snsfx Ab Nei - Top roll cover, hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Side movements powered hydraulically Options: - Variable rotation speed EUR 5,858 - Material feed table on request - Oil cooler standard - Central support EUR 18,750 - Side supports EUR 15,150 We have numerous references!

Būklė: naujas, Bending length: 3100 mm Sheet thickness: 13 mm Top roller diameter: 300 mm Technical specifications: Itsdpod Ab S Tefx Ab Nei - Hardened and polished rollers - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rollers - Portable control panel - Rollers mounted with bearings - Top roller cover hydraulically openable and closable via control panel - All rollers driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically driven Options: - Variable rotation speed EURO 4,682 - Material feed table on request - Oil cooler EURO 1,040 - Central support EURO 13,600 - Side supports EURO 9,400 We have numerous references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 16 mm Top roll diameter: 270 mm Technical specifications: - Rolls are hardened and polished - Entire frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control console - Rolls mounted with bearings - Top roll cover hydraulically openable and closable via control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements driven hydraulically Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 5,700 Isded Ab Tfopfx Ab Nsti We have numerous references!

Būklė: naujas, Bending length: 2100 mm Sheet thickness: 6 mm Top roll diameter: 160 mm Iodod Ab Trspfx Ab Njti Technical Data: - Hardened and polished rolls - Complete frame made of ST-52 steel - Conical bending device - Digital display for side rolls - Portable control panel - Rolls mounted on bearings - Top roll cover hydraulically openable and closable from the control panel - All rolls driven by hydraulic motor and planetary gearbox - Lateral movements hydraulically driven Options: - Variable rotation speed: EUR 4,682 - Material feed table on request - Oil cooler: EUR 1,040 - Central support: EUR 8,250 - Side supports: EUR 4,600 We have numerous references!

Būklė: naujas, Sheet thickness: 3.3 mm Bending length: 1050 mm Upper roller diameter: 90 mm Technical Data: - Cast iron body - Manual or motorized (optional) bending - After bending, the upper roller can be swung out to easily remove the material - Conical bending device - Rear roller and lower roller are manually raised and lowered using the handwheel - Portable control panel Itedsd Ab T Djpfx Ab Noi - In compliance with CE standards Options: - Motorized rear roller EURO 825,-- - Digital display for rear roller position EURO 1,010,-- - Body cover EURO 274,-- - Hardened rolls EURO 480, -- We have many references!

Būklė: naujas, Bending length: 1550 mm Sheet thickness: 1.2 mm Top roller diameter: 70 mm Technical specifications: Itedpfxsd Ab T Is Ab Nji - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roller can be swung out to easily remove the workpiece - Conical bending device - Manual adjustment of the rear and lower rollers via handwheel - Portable control panel - Complies with CE standards Options: - Motorized rear roller - Digital display for rear roller position - Body cover: EUR 362,-- - Hardened rollers: EUR 550,-- - Variable rolling speed We have many references!

Būklė: naujas, Sheet thickness: 1.2 mm Bending length: 1550 mm Top roll diameter: 70 mm Technical Data: Isdpfed Ab T Njx Ab Nsti - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roll can be opened to the side for easy material removal - Cone bending device - Rear and bottom rolls are raised and lowered manually via handwheel - Portable control panel - In compliance with CE standards Options: - Motorized rear roll EURO 825,-- - Digital display for rear roll position EURO 1,010,-- - Body cover EURO 362,-- - Hardened rolls EURO 550,-- We have a large number of references!

Būklė: naujas, Bending length: 1050 mm Sheet thickness: 1 mm Top roll diameter: 56 mm Technical data: - Cast iron body - Manual or motorized (optional) bending - After bending, the top roll can be opened to the side for easy material removal - Cone bending device - Rear and lower rolls are adjusted up and down manually via handwheel - Mobile control panel - CE compliant Options: - Motorized rear roll - Digital display for rear roll position Ijdpfx Aed Ab Uxjb Njti - Body cover - Hardened rolls according to EURO 336 We have numerous references!

Būklė: naujas, Lankstymo ilgis: 1050 mm Lakšto storis: 1 mm Viršutinio volo skersmuo: 56 mm Techniniai duomenys: - Ketaus korpusas Itjdpfx Abod Ab Uyo Nsi - Rankinis arba motorizuotas (pasirinktinai) lankstymas - Po lankstymo viršutinis volas atidaromas į šoną, kad būtų lengviau išimti medžiagą - Kūginio lankstymo įrenginys - Galinio ir apatinio volų judėjimas rankiniu būdu aukštyn ir žemyn su rankiniu ratu - Nešiojamas valdymo pultas - Atitinka CE standartus Pasirinkimai: - Motorizuotas galinis volas - Skaitmeninis ekranas galinio volo padėčiai rodyti - Korpuso apsauga - Grūdinti volai EURO 396,-- Turime daug patikimų klientų!

Būklė: naujas, Bending length: 1050 mm Sheet thickness: 0.8 mm Top roller diameter: 46 mm Technical specifications: - Cast iron frame - Manual or motorized (optional) bending - After bending, the top roller can be swung out to easily remove the workpiece - Cone bending device - Adjustment of rear and lower rollers up and down manually via handwheel Isdpfx Abjd Ab U Ae Nsti - Portable control console - In compliance with CE standards Options: - Rear roller with motor drive - Digital display for indication of the rear roller position - Body cover - Hardened rollers EURO 336, -- We have numerous references!

Būklė: naujas, Working width: 1,500 mm Working length: 3,000 mm Accuracy +/-: 0.05 Itsdpsrh Rpfofx Ab Nei Maximum loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approximate weight: 7,900 kg Laser power: 3 kW Max material thickness St 37-42: 16 mm Max for aluminium approx.: 5 mm Max for stainless steel approx.: 5 mm The FLC Series is a fast, responsive, reliable, and cost-efficient fiber laser cutting machine. It is a high-efficiency laser cutting machine designed to meet upper-class standards. Capable of supporting up to 30,000 W laser power, it is an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food processing machinery, construction equipment, elevators, and other large machines and systems. It is an ideal cutting solution for those looking to outsource their production. The wireless remote control allows easy blowing, cutting, pausing, calibration simulation, and more. The standard nesting software quickly optimizes parts for cutting without operator intervention and also offers a flycut function. Featuring a dual-change table system, you can continue cutting without any wait time. All our machines are manufactured to European standards and come with CE certification. Our FLC series machines are equipped with nozzle cleaning and dual camera systems. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser heads feature autofocus, active anti-collision, and Auto-View functions, which detect obstacles and automatically move the head accordingly. Cutting heads feature automatic cooling. Bridges in all our machines are fabricated from one-piece, welded aluminum alloy sheets. The monolithic design ensures bridge rigidity, preventing deformation from impacts, overlaps, or loads. Additionally, these bridges are three times lighter than steel alternatives, enabling higher speeds and acceleration with lower motor power. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Fly cutting - Starter kit with nozzles and lenses - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote query - Automatic lubrication system - Dual camera Laser type: Fully enclosed design CNC unit: Cyp Cut Autofocus: Yes Working area: 1,500 x 3,000 mm Repeatable positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Max. speed: 120 m/min Max. acceleration: 1.2 G Max. load capacity (each table): 1,250 kg Laser source: Han’s resonator Source power: 2,000 W Table change time: 15 s Laser cutting head: Raycus, auto focus Power supply: 380 V, 50 Hz (three-phase) Graphic formats: DWG / DXF / STP Chiller: Available Approx. machine weight: 7,900 kg Approx. machine dimensions: 2,200 x 8,100 x 2,560 mm

Būklė: naujas, Laser power: 6Loading capacity: 1250Positioning accuracy: 0.05Repeatability: 0.03Table changeover time: approx. 15Cooling system: Water chillerWeight approx.: 17,500Dimensions (LxWxH): 4,400 x 9,500 x 2,350 mmMax. speed: 120Tube diameter: 220Working area: 2,000 x 6,000 The FLC-P series is a fast, precise, reliable, and cost-effective fiber laser cutting machine for tube and profile cutting. This is a high-efficiency, upper-class-standard laser cutting machine. It can reach laser power levels of up to 20,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are typically used for processing agricultural machinery, textile machinery, food machinery, construction equipment, elevator manufacturing, and other large-scale machines and installations. You do not need to purchase two separate machines. You can cut both sheet metal and tube profiles. Its compact design saves space. One machine, two applications. Cuts both sheets and metal tubes/profiles. Standard tube/profile cutting length is 6 meters, optional up to 9 meters. Tube diameters up to 350 mm possible. Chucks can be clamped and automatically centered at the press of a button. Wireless remote control allows for easy blowing, cutting, pausing, calibration simulation, etc. Standard nesting software quickly prepares parts for cutting without operator intervention, and includes a flycut cutting function. Dual shuttle tables mean cutting can continue without waiting times. All our machines are manufactured to European standards and are CE certified. Our FLC machines feature nozzle cleaning and a dual camera system. Available cutting areas: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head includes autofocus and active anti-collision function, with auto-view for obstacle detection and automatic movement. Cutting heads feature automatic cooling. The bridges in all our machines are made from a single-piece welded aluminum sheet construction. This one-piece design guarantees bridge rigidity and ensures shape retention, preventing deformation from shocks, overlaps, or loads. Additionally, their structure is three times lighter than steel profile bridges, enabling high speeds and acceleration with less drive power. Accessories included: - Water chiller - Control cabinet cooling - Automatic autofocus head - Nesting software - 19-inch touch CNC control Itjdpetwtn Iefx Ab Nsi - Flycutting - Nozzle and lens starter kit - Parts collection drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site operator training - Wireless remote interface - Automatic lubrication system - Dual camera system

Būklė: naujas, Pressure: 150 Bending length: 3050 mm Frame width: 3050 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 4740 x 2000 x 2680 mm Weight approx.: 9500 kg Motor power: 22 kW CNC crowning via controller: yes CNC Servo Electric Press Brake KKI Model REVOLUTION DDM-15030 Servo-motorized Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and offer the flexibility and reliability that make them the technology of the future. Higher speed and accuracy of this next generation of machines provide you with greater efficiency, ergonomic features, and an environmentally friendly production technology. As the first producer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, backed by extensive experience and quality. Standard Equipment: KK-Industries holds the general representation for the DENER Group. We have compiled a high-quality model for the European market. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological Advantages – Model REVOLUTION DDM The CNC servo electric press brake impresses with high precision, accuracy, and versatile application capability. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to traditional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full frame width usable - Lower maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Features: 3D color graphic controller DELEM 66 T 17" touch screen Y1, Y2, X, and R axes CNC-controlled CNC crowning via 3D control X axis 500 mm, R axis stroke 150 mm on 1.5 m and 2 m models X axis 750 mm, R axis stroke 250 mm on all other press brakes We also make no compromises on the punch and die, equipping the KKI REVOLUTION CNC Servo Electric Press Brake with high-quality tooling from EUROSTAMP Italy. Segmented gooseneck upper tool 4-V die block 60 x 60 (V = 16, 22, 35, and 50 mm) Backgauge with servo motors on linear guides and ball screw Naturally, any machine is only as good as its service. That is why we focus on highly qualified staff with long experience in CNC sheet metal processing. Laser safety device on upper beam CE safety equipment Operating manual in GERMAN and ENGLISH Itodpfjd Etf Eex Ab Noi Options: Additional controlled axes for the backgauge: X1, X2, R, Z1, Z2, Delta X ATF Type 6-axis backgauge, X1, X2 – R Type backgauge X-Prime Type backgauge Hydraulic upper and lower tool clamping for WILA tools CNC 3D touchscreen controller DELEM DA-69T KK-Industries GmbH

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Cutting width: 3,200 mm Total power requirement: 7.5 kW Approx. weight: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Technical Data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized, 1,000 mm Motor power: 7.5 kW Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 6,250 kg Equipment: Swing-beam shear design NC preselection control ELGO P 40 T with backgauge and cutting gap adjustment from the front via control panel Iodpovap Tuofx Ab Noti motorized backgauge up to 1,000 mm clear control panel mounted on swivel arm hydraulic hold-downs positioned close to the cutting edge foot switch cutting gap adjustment cutting line illumination wide support table with ball transfers fold-up finger guard, 1,000 mm 1 T-slot side stop 2 sheet support arms with T-slot simple blade changing and regrinding adjustable cutting length for efficient processing bottom blade with 4 cutting edges (reversible) top blade with 2 cutting edges (reversible) qualified customer service Operating manual in ENGLISH Machine and equipment in accordance with CE regulations